Acer aspire 5732z waits almost exactly 1 minute during start-up
Try to disable fast startup from windows:http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html instructions are for windows 8 but it's the same on windows 10. please report your BIOS version if possible.
Thanks for suggestions...I updated the bios -- no change;I have now tried ubuntu from a usb stick and that started almost immediately.I also notice that when I start from shut down and press F2 for the bios settings I also have to wait almost exactly a minute for the bios settings to load!Among the settings are:Quiet boot: enabledNetwork boot: enabledF12 Boot Menu: disabledD2D Recovery: EnabledSata Mode: AHCI Don't know if any of that helps...Generally when you restart - rather than start from a hard reset it does not wait a minute...Thank again
Similar Messages
-
Acer aspire 5732z laptop problem
hi, my name is mar and i'm new to the community. i have this issue with my acer aspire 5732z laptop. i just change my hard drive and i have to install new windows into it.i allready install windows 10 but it's not activated yet because i don't have a product key. so i'm thinking if i can still download my old version of windows and do the upgrade. i don't have the cd of my old version but i do have the product key at the back of my laptop.is there any solution to this without buying the windows 10. thank you for help.
[subject line edited to reflect new topic]what was the original OS?
-
27" iMac takes almost exactly 5 minutes to boot up.
My Intel iMac 27" iMac 2.7Ghz 8 GB running OSX 10.9.2 now takes almost 5 minutes to boot up. I have tried all the unplugging resets etc but to no avail. There are no peripheral devises attached and everything functions normally when it does decide to boot up. I have masses of memeory left. 1.8Tb and there does not appear to be any problem after running disc utlity. I'm stuck! Any ideas please?
Thank you
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:45.000 bootlog[0]: BOOT_TIME 1397724705 0
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
17/04/2014 09:51:53.000 kernel[0]: Longterm timer threshold: 1000 ms
17/04/2014 09:51:53.000 kernel[0]: PMAP: PCID enabled
17/04/2014 09:51:53.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
17/04/2014 09:51:53.000 kernel[0]: vm_page_bootstrap: 1878226 free pages and 202542 wired pages
17/04/2014 09:51:53.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
17/04/2014 09:51:53.000 kernel[0]: zone leak detection enabled
17/04/2014 09:51:53.000 kernel[0]: "vm_compressor_mode" is 4
17/04/2014 09:51:53.000 kernel[0]: standard timeslicing quantum is 10000 us
17/04/2014 09:51:53.000 kernel[0]: standard background quantum is 2500 us
17/04/2014 09:51:53.000 kernel[0]: mig_table_max_displ = 74
17/04/2014 09:51:53.000 kernel[0]: TSC Deadline Timer supported and enabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
17/04/2014 09:51:53.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
17/04/2014 09:51:53.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
17/04/2014 09:51:53.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
17/04/2014 09:51:53.000 kernel[0]: The Regents of the University of California. All rights reserved.
17/04/2014 09:51:53.000 kernel[0]: MAC Framework successfully initialized
Date/Time: 2014-04-16 19:44:12 +0100
OS Version: 10.9.2 (Build 13C64)
Architecture: x86_64
Report Version: 18
Command: No Target
Path: No Target
Version: ??? (???)
Parent: UNKNOWN PROCESS [0]
PID: 0
Event: shutdown stall
Duration: 12.05s (sampling started after 2 seconds)
Steps: 101 (100ms sampling interval)
Hardware model: iMac12,2
Active cpus: 4
Fan speed: 1147 rpm
Free pages: 1544985 pages (-132)
Pageins: 5 pages
Pageouts: 0 pages
Swapins: 0 pages
Swapouts: 0 pages
Process: diskarbitrationd [22]
Path: /usr/libexec/diskarbitrationd
Architecture: x86_64
Parent: launchd [1]
UID: 0
Sudden Term: Dirty
Task size: 439 pages (-6)
Importance: Adaptive, Donating
Timers: Coalesced
Thread 0x15a DispatchQueue 1 priority 31
101 start + 1 (libdyld.dylib) [0x7fff913cf5fd]
101 ??? (diskarbitrationd + 28877) [0x10d0bc0cd]
101 CFRunLoopRun + 97 (CoreFoundation) [0x7fff8fb50811]
101 CFRunLoopRunSpecific + 309 (CoreFoundation) [0x7fff8fa9b0b5]
101 __CFRunLoopRun + 1161 (CoreFoundation) [0x7fff8fa9b779]
101 __CFRunLoopServiceMachPort + 181 (CoreFoundation) [0x7fff8fa9c155]
101 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa1a]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x15b DispatchQueue 2 priority 33
101 _dispatch_mgr_thread + 52 (libdispatch.dylib) [0x7fff92a45152]
101 kevent64 + 10 (libsystem_kernel.dylib) [0x7fff91314662]
*101 ??? (mach_kernel + 3949760) [0xffffff80005c44c0]
Thread 0x4edf priority 29
81 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
81 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*81 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f19 priority 29
79 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
79 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*79 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f6f priority 29
68 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
68 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*68 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Binary Images:
0x10d0b5000 - 0x10d0cafff diskarbitrationd (266) <94F10D52-A866-34ED-B278-873B4B2E0C7E> /usr/libexec/diskarbitrationd
0x7fff8fa2b000 - 0x7fff8fc10fff com.apple.CoreFoundation 6.9 (855.14) <617B8A7B-FAB2-3271-A09B-C542E351C532> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff912fe000 - 0x7fff9131aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff913cc000 - 0x7fff913cfff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff92a42000 - 0x7fff92a5cfff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
0x7fff92ac3000 - 0x7fff92acaff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
*0xffffff7f80b49000 - 0xffffff7f80b50fff com.apple.kec.pthread 1.0 (1) <619F6A5D-FFA2-3B59-9993-958FD7154B83> /System/Library/Extensions/pthread.kext/Contents/MacOS/pthread
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Process: launchd [1]
Path: /sbin/launchd
Architecture: unknown
Parent: kernel_task [0]
UID: 0
Task size: 949 pages
CPU Time: 0.023s
Thread 0xf2 DispatchQueue 1 priority 31
101 ??? [0x7fff913cf5fd]
101 ??? [0x10ea85935]
101 ??? [0x10ea879e6]
100 ??? [0x7fff8d4d8000]
100 ??? [0x7fff8d4d7e6b]
100 ??? [0x7fff9130fa1a]
*100 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
1 ??? [0x7fff8d4d7ff1]
1 ??? [0x7fff92a43ccc]
1 ??? [0x7fff92a42ffd]
1 ??? [0x7fff8d31387c]
1 ??? [0x7fff924442ca]
1 ??? [0x7fff92443b61]
1 ??? [0x7fff9244178f]
1 ??? [0x7fff8bdc8f43]
1 <executing in user space>
Thread 0xfb priority 31
101 ??? [0x7fff92ac8fc9]
101 ??? [0x7fff92ac472a]
101 ??? [0x7fff92ac4899]
101 ??? [0x7fff913139aa]
*101 ??? (mach_kernel + 4069872) [0xffffff80005e19f0]
Thread 0xfc priority 31-46 cpu time 0.023s
101 ??? [0x7fff92ac8fc9]
101 ??? [0x7fff92ac472a]
101 ??? [0x7fff92ac4899]
100 ??? [0x10ea85a59]
100 ??? [0x7fff8d8fdc1f]
100 ??? [0x7fff91313a3a]
*100 semaphore_wait_continue + 0 (mach_kernel) [0xffffff800023b5a0]
1 ??? [0x7fff91314e72]
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 sync + 23 (mach_kernel) [0xffffff80003e4b17]
*1 vfs_iterate + 266 (mach_kernel) [0xffffff80003ddeaa]
*1 ??? (mach_kernel + 1985395) [0xffffff80003e4b73]
*1 VFS_SYNC + 198 (mach_kernel) [0xffffff80003fa506]
*1 hfs_sync + 576 (mach_kernel) [0xffffff8000576de0]
*1 hfs_journal_flush + 95 (mach_kernel) [0xffffff80005826ff]
*1 journal_flush + 606 (mach_kernel) [0xffffff80004064ee]
*1 ??? (mach_kernel + 2112279) [0xffffff8000403b17]
*1 ??? (mach_kernel + 2125622) [0xffffff8000406f36]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Process: launchd [338]
Path: /sbin/launchd
Architecture: x86_64
Parent: launchd [1]
UID: 501
Sudden Term: Dirty
Task size: 418 pages
Importance: Donating
Timers: Coalesced
Thread 0x45ab DispatchQueue 1 priority 31
101 start + 1 (libdyld.dylib) [0x7fff913cf5fd]
101 ??? (launchd + 18741) [0x105c61935]
101 ??? (launchd + 27110) [0x105c639e6]
101 xpc_pipe_try_receive + 87 (libxpc.dylib) [0x7fff8d4d8000]
101 _xpc_pipe_receive + 92 (libxpc.dylib) [0x7fff8d4d7e6b]
101 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa1a]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x45ae priority 31
101 thread_start + 13 (libsystem_pthread.dylib) [0x7fff92ac8fc9]
101 _pthread_start + 137 (libsystem_pthread.dylib) [0x7fff92ac472a]
101 _pthread_body + 138 (libsystem_pthread.dylib) [0x7fff92ac4899]
101 __select + 10 (libsystem_kernel.dylib) [0x7fff913139aa]
*101 ??? (mach_kernel + 4069872) [0xffffff80005e19f0]
Binary Images:
0x105c5d000 - 0x105c83ff7 launchd (842.90.1) <425516B6-9F3E-342F-87B3-EC461EBA6A1A> /sbin/launchd
0x7fff8d4c0000 - 0x7fff8d4e4fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x7fff912fe000 - 0x7fff9131aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff913cc000 - 0x7fff913cfff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff92ac3000 - 0x7fff92acaff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Process: mbicloudsetup [493]
Path: /System/Library/CoreServices/Setup Assistant.app/Contents/Resources/mbicloudsetup
Architecture: x86_64
Parent: launchd [338]
UID: 501
Task size: 4424 pages (-18)
CPU Time: 0.001s
Importance: Donating
Timers: Coalesced
Thread 0x4a7b DispatchQueue 1 priority 31 cpu time 0.001s
101 start + 1 (libdyld.dylib) [0x7fff913cf5fd]
101 ??? (mbicloudsetup + 32740) [0x100b03fe4]
101 CFRunLoopRunSpecific + 309 (CoreFoundation) [0x7fff8fa9b0b5]
101 __CFRunLoopRun + 1161 (CoreFoundation) [0x7fff8fa9b779]
101 __CFRunLoopServiceMachPort + 181 (CoreFoundation) [0x7fff8fa9c155]
101 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa1a]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x4ac3 DispatchQueue 2 priority 33
101 _dispatch_mgr_thread + 52 (libdispatch.dylib) [0x7fff92a45152]
101 kevent64 + 10 (libsystem_kernel.dylib) [0x7fff91314662]
*101 ??? (mach_kernel + 3949760) [0xffffff80005c44c0]
Thread 0x4f30 priority 31
100 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
100 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*100 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f6e priority 31
100 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
100 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*100 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f34 priority 31
99 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
99 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*99 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f88 priority 31
99 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
99 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*99 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f94 priority 31
99 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
99 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*99 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f75 priority 31-33
98 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
98 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*98 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f86 priority 31
67 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
67 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*67 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Binary Images:
0x100afc000 - 0x100b11fff mbicloudsetup (1336) <F0BDA312-271C-3238-909E-8119221EA483> /System/Library/CoreServices/Setup Assistant.app/Contents/Resources/mbicloudsetup
0x7fff8fa2b000 - 0x7fff8fc10fff com.apple.CoreFoundation 6.9 (855.14) <617B8A7B-FAB2-3271-A09B-C542E351C532> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff912fe000 - 0x7fff9131aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff913cc000 - 0x7fff913cfff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff92a42000 - 0x7fff92a5cfff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
0x7fff92ac3000 - 0x7fff92acaff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
*0xffffff7f80b49000 - 0xffffff7f80b50fff com.apple.kec.pthread 1.0 (1) <619F6A5D-FFA2-3B59-9993-958FD7154B83> /System/Library/Extensions/pthread.kext/Contents/MacOS/pthread
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Process: secd [354]
Path: /usr/libexec/secd
Architecture: x86_64
Parent: launchd [338]
UID: 501
Sudden Term: Dirty (allows idle exit)
Task size: 860 pages (-19)
Importance: Adaptive, Donating
Timers: Coalesced
Thread 0x4633 DispatchQueue 7 priority 31
101 _dispatch_sig_thread + 45 (libdispatch.dylib) [0x7fff92a4d7d5]
101 __sigsuspend_nocancel + 10 (libsystem_kernel.dylib) [0x7fff91313caa]
*101 ??? (mach_kernel + 4069872) [0xffffff80005e19f0]
Thread 0x4634 DispatchQueue 2 priority 33
101 _dispatch_mgr_thread + 52 (libdispatch.dylib) [0x7fff92a45152]
101 kevent64 + 10 (libsystem_kernel.dylib) [0x7fff91314662]
*101 ??? (mach_kernel + 3949760) [0xffffff80005c44c0]
Thread 0x4f81 priority 31
78 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
78 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*78 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f1f priority 31
77 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
77 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*77 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f21 priority 31
77 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
77 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*77 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f64 priority 31
77 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
77 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*77 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f7f priority 31
68 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
68 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*68 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f92 priority 31
68 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
68 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*68 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f80 priority 29
67 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
67 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*67 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Binary Images:
0x10eb47000 - 0x10ebbaff9 secd (55471.14) <D6FF6419-9C01-36B7-A5A4-9CFFEFCD8F3C> /usr/libexec/secd
0x7fff912fe000 - 0x7fff9131aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff92a42000 - 0x7fff92a5cfff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
0x7fff92ac3000 - 0x7fff92acaff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
*0xffffff7f80b49000 - 0xffffff7f80b50fff com.apple.kec.pthread 1.0 (1) <619F6A5D-FFA2-3B59-9993-958FD7154B83> /System/Library/Extensions/pthread.kext/Contents/MacOS/pthread
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Process: securityd [14]
Path: /usr/sbin/securityd
Architecture: x86_64
Parent: launchd [1]
UID: 0
Sudden Term: Dirty
Task size: 859 pages (-3)
Importance: Adaptive, Boosted, Donating
Timers: Coalesced
Thread 0x12c DispatchQueue 1 priority 31
101 start + 1 (libdyld.dylib) [0x7fff913cf5fd]
101 ??? (securityd + 238216) [0x105846288]
101 ??? (securityd + 487785) [0x105883169]
101 ??? (securityd + 47064) [0x1058177d8]
101 mach_msg_overwrite_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa26]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x150 DispatchQueue 2 priority 33
101 _dispatch_mgr_thread + 52 (libdispatch.dylib) [0x7fff92a45152]
101 kevent64 + 10 (libsystem_kernel.dylib) [0x7fff91314662]
*101 ??? (mach_kernel + 3949760) [0xffffff80005c44c0]
Thread 0x135 priority 31
101 thread_start + 13 (libsystem_pthread.dylib) [0x7fff92ac8fc9]
101 _pthread_start + 137 (libsystem_pthread.dylib) [0x7fff92ac472a]
101 _pthread_body + 138 (libsystem_pthread.dylib) [0x7fff92ac4899]
101 ??? (securityd + 46174) [0x10581745e]
101 ??? (securityd + 375618) [0x105867b42]
101 au_sdev_read_aia + 570 (libbsm.0.dylib) [0x7fff8e726ac5]
101 fgetc + 44 (libsystem_c.dylib) [0x7fff8d8be68e]
101 __srget + 14 (libsystem_c.dylib) [0x7fff8d8c4ff5]
101 __srefill1 + 24 (libsystem_c.dylib) [0x7fff8d8c4edb]
101 __read_nocancel + 10 (libsystem_kernel.dylib) [0x7fff913138ea]
*101 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*101 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*101 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
*101 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
*101 ??? (mach_kernel + 2045285) [0xffffff80003f3565]
*101 VNOP_READ + 225 (mach_kernel) [0xffffff80003fd9b1]
*101 spec_read + 253 (mach_kernel) [0xffffff800040ca8d]
*101 ??? (mach_kernel + 3836905) [0xffffff80005a8be9]
*101 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*101 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*101 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*101 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*101 ??? (mach_kernel + 223627) [0xffffff800023698b]
*101 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Thread 0x42a3 priority 31
101 thread_start + 13 (libsystem_pthread.dylib) [0x7fff92ac8fc9]
101 _pthread_start + 137 (libsystem_pthread.dylib) [0x7fff92ac472a]
101 _pthread_body + 138 (libsystem_pthread.dylib) [0x7fff92ac4899]
101 ??? (securityd + 46174) [0x10581745e]
101 ??? (securityd + 46285) [0x1058174cd]
101 ??? (securityd + 47064) [0x1058177d8]
101 mach_msg_overwrite_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa26]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x4c2b priority 31
101 thread_start + 13 (libsystem_pthread.dylib) [0x7fff92ac8fc9]
101 _pthread_start + 137 (libsystem_pthread.dylib) [0x7fff92ac472a]
101 _pthread_body + 138 (libsystem_pthread.dylib) [0x7fff92ac4899]
101 ??? (securityd + 46174) [0x10581745e]
101 ??? (securityd + 46285) [0x1058174cd]
101 ??? (securityd + 47064) [0x1058177d8]
101 mach_msg_overwrite_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa26]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x4fea priority 31
101 thread_start + 13 (libsystem_pthread.dylib) [0x7fff92ac8fc9]
101 _pthread_start + 137 (libsystem_pthread.dylib) [0x7fff92ac472a]
101 _pthread_body + 138 (libsystem_pthread.dylib) [0x7fff92ac4899]
101 ??? (securityd + 46174) [0x10581745e]
101 ??? (securityd + 46285) [0x1058174cd]
101 ??? (securityd + 47064) [0x1058177d8]
101 mach_msg_overwrite_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa26]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x4feb priority 31
101 thread_start + 13 (libsystem_pthread.dylib) [0x7fff92ac8fc9]
101 _pthread_start + 137 (libsystem_pthread.dylib) [0x7fff92ac472a]
101 _pthread_body + 138 (libsystem_pthread.dylib) [0x7fff92ac4899]
101 ??? (securityd + 46174) [0x10581745e]
101 ??? (securityd + 46285) [0x1058174cd]
101 ??? (securityd + 47064) [0x1058177d8]
101 mach_msg_overwrite_trap + 10 (libsystem_kernel.dylib) [0x7fff9130fa26]
*101 ipc_mqueue_receive_continue + 0 (mach_kernel) [0xffffff8000216800]
Thread 0x4f4f priority 31
79 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
79 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*79 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x4f70 priority 31
68 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
68 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*68 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Binary Images:
0x10580c000 - 0x1058c6ff7 securityd (55199.2) <24B2717F-5436-3EC4-B212-34D13427025B> /usr/sbin/securityd
0x7fff8d882000 - 0x7fff8d90bff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x7fff8e718000 - 0x7fff8e728fff libbsm.0.dylib (33) <2CAC00A2-1352-302A-88FA-C567D4D69179> /usr/lib/libbsm.0.dylib
0x7fff912fe000 - 0x7fff9131aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff913cc000 - 0x7fff913cfff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff92a42000 - 0x7fff92a5cfff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
0x7fff92ac3000 - 0x7fff92acaff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
*0xffffff7f80b49000 - 0xffffff7f80b50fff com.apple.kec.pthread 1.0 (1) <619F6A5D-FFA2-3B59-9993-958FD7154B83> /System/Library/Extensions/pthread.kext/Contents/MacOS/pthread
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Process: spindump [567]
Path: /usr/sbin/spindump
Architecture: x86_64
Parent: launchd [1]
UID: 0
Task size: 1099 pages (+359)
Pageins: 3 pages
CPU Time: 0.056s
Importance: Adaptive, Donating
Thread 0x4f2d priority 31
11 start + 1 (libdyld.dylib) [0x7fff913cf5fd]
11 ??? (spindump + 9932) [0x108ace6cc]
11 dispatch_main + 43 (libdispatch.dylib) [0x7fff92a4d71f]
11 pthread_exit + 30 (libsystem_pthread.dylib) [0x7fff92ac53e9]
11 _pthread_exit + 111 (libsystem_pthread.dylib) [0x7fff92ac5479]
11 _pthread_tsd_cleanup + 182 (libsystem_pthread.dylib) [0x7fff92ac85af]
10 _dispatch_queue_cleanup2 + 86 (libdispatch.dylib) [0x7fff92a4d775]
10 sleep$NOCANCEL + 42 (libsystem_c.dylib) [0x7fff8d8b0992]
10 __semwait_signal_nocancel + 10 (libsystem_kernel.dylib) [0x7fff91313a52]
*10 semaphore_wait_continue + 0 (mach_kernel) [0xffffff800023b5a0]
1 __CFTSDFinalize + 100 (CoreFoundation) [0x7fff8fafd104]
1 __NSFinalizeThreadData + 486 (Foundation) [0x7fff86214796]
1 -[NSNotificationCenter postNotificationName:object:userInfo:] + 44 (Foundation) [0x7fff8618d7a2]
1 +[NSConcreteNotification newTempNotificationWithName:object:userInfo:] + 54 (Foundation) [0x7fff8618d819]
1 objc_msgSend + 233 (libobjc.A.dylib) [0x7fff8d312169]
1 lookUpImpOrForward + 170 (libobjc.A.dylib) [0x7fff8d31f254]
1 _class_initialize + 73 (libobjc.A.dylib) [0x7fff8d313135]
1 _class_initialize + 73 (libobjc.A.dylib) [0x7fff8d313135]
1 _class_initialize + 645 (libobjc.A.dylib) [0x7fff8d313371]
1 objc_msgSend + 233 (libobjc.A.dylib) [0x7fff8d312169]
1 lookUpImpOrForward + 162 (libobjc.A.dylib) [0x7fff8d31f24c]
1 _class_getNonMetaClass + 32 (libobjc.A.dylib) [0x7fff8d3134fb]
1 __psynch_rw_wrlock + 10 (libsystem_kernel.dylib) [0x7fff913137ee]
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 psynch_rw_wrlock + 45 (mach_kernel) [0xffffff8000632f1d]
*1 __psynch_rw_lock + 521 (pthread) [0xffffff7f80b4eeb6]
*1 ksyn_wait + 253 (pthread) [0xffffff7f80b4d9d5]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Thread 0x5017 DispatchQueue 2 priority 33 cpu time 0.003s
101 _dispatch_mgr_thread + 52 (libdispatch.dylib) [0x7fff92a45152]
101 kevent64 + 10 (libsystem_kernel.dylib) [0x7fff91314662]
*101 ??? (mach_kernel + 3949760) [0xffffff80005c44c0]
Thread 0x5018 DispatchQueue 7 priority 31
101 _dispatch_sig_thread + 45 (libdispatch.dylib) [0x7fff92a4d7d5]
101 __sigsuspend_nocancel + 10 (libsystem_kernel.dylib) [0x7fff91313caa]
*101 ??? (mach_kernel + 4069872) [0xffffff80005e19f0]
Thread <multiple> DispatchQueue 15 priority 31 cpu time 0.051s
101 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
101 _pthread_wqthread + 314 (libsystem_pthread.dylib) [0x7fff92ac5ef8]
101 _dispatch_worker_thread2 + 40 (libdispatch.dylib) [0x7fff92a46193]
101 _dispatch_root_queue_drain + 75 (libdispatch.dylib) [0x7fff92a44fa3]
101 _dispatch_queue_invoke + 110 (libdispatch.dylib) [0x7fff92a469dd]
101 _dispatch_queue_drain + 359 (libdispatch.dylib) [0x7fff92a45633]
101 _dispatch_source_invoke + 413 (libdispatch.dylib) [0x7fff92a458a1]
101 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff92a432ad]
101 __syscall + 10 (libsystem_kernel.dylib) [0x7fff91313d3a]
*101 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*101 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*101 stack_snapshot2 + 376 (mach_kernel) [0xffffff80005b0318]
Thread 0x5019 priority 29-31 cpu time 0.001s
99 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
99 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*99 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x501b priority 31
99 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
99 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*99 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x501c priority 31
99 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
99 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*99 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x501a priority 31
98 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
98 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*98 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x501d priority 29-31
98 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
98 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*98 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Thread 0x501f priority 31
2 thread_start + 13 (libsystem_pthread.dylib) [0x7fff92ac8fc9]
2 _pthread_start + 137 (libsystem_pthread.dylib) [0x7fff92ac472a]
2 _pthread_body + 138 (libsystem_pthread.dylib) [0x7fff92ac4899]
2 ??? (CoreSymbolication + 79489) [0x7fff9042e681]
2 __semwait_signal + 10 (libsystem_kernel.dylib) [0x7fff91313a3a]
*2 semaphore_wait_continue + 0 (mach_kernel) [0xffffff800023b5a0]
Thread 0x501d DispatchQueue 5 priority 29
1 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
1 _pthread_wqthread + 314 (libsystem_pthread.dylib) [0x7fff92ac5ef8]
1 _dispatch_worker_thread2 + 40 (libdispatch.dylib) [0x7fff92a46193]
1 _dispatch_root_queue_drain + 75 (libdispatch.dylib) [0x7fff92a44fa3]
1 _dispatch_source_invoke + 413 (libdispatch.dylib) [0x7fff92a458a1]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff92a432ad]
1 _dispatch_after_timer_callback + 77 (libdispatch.dylib) [0x7fff92a4b443]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff92a432ad]
1 _dispatch_call_block_and_release + 12 (libdispatch.dylib) [0x7fff92a461d7]
1 __CFNotificationCenterGetLocalCenter_block_invoke_4 + 191 (CoreFoundation) [0x7fff8fa3a8bf]
1 _CFXNotificationRegisterObserver + 1119 (CoreFoundation) [0x7fff8fa3d56f]
1 -[OS_xpc_object _xref_dispose] + 48 (libxpc.dylib) [0x7fff8d4c49bf]
1 _xpc_dispose + 15 (libxpc.dylib) [0x7fff8d4c49df]
1 _xpc_dictionary_dispose + 34 (libxpc.dylib) [0x7fff8d4c886d]
1 OSSpinLockLock + 11 (libsystem_platform.dylib) [0x7fff8bdc6e41]
1 <executing in user space>
Thread 0x5019 DispatchQueue 7 priority 31
1 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
1 _pthread_wqthread + 314 (libsystem_pthread.dylib) [0x7fff92ac5ef8]
1 _dispatch_worker_thread2 + 40 (libdispatch.dylib) [0x7fff92a46193]
1 _dispatch_root_queue_drain + 326 (libdispatch.dylib) [0x7fff92a4509e]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff92a432ad]
1 _xpc_connection_resume_init + 14 (libxpc.dylib) [0x7fff8d4c91b2]
1 _xpc_connection_init + 1201 (libxpc.dylib) [0x7fff8d4c9671]
1 dispatch_mach_connect + 65 (libdispatch.dylib) [0x7fff92a4649a]
1 _dispatch_calloc + 31 (libdispatch.dylib) [0x7fff92a444ce]
1 calloc + 49 (libsystem_malloc.dylib) [0x7fff924442ca]
1 malloc_zone_calloc + 79 (libsystem_malloc.dylib) [0x7fff92443b61]
1 szone_malloc_should_clear + 2254 (libsystem_malloc.dylib) [0x7fff92441b51]
1 _platform_bzero$VARIANT$Merom + 10 (libsystem_platform.dylib) [0x7fff8bdc8f1a]
*1 hndl_alltraps + 219 (mach_kernel) [0xffffff80002f322b]
*1 user_trap + 157 (mach_kernel) [0xffffff80002dc01d]
Thread 0x501d DispatchQueue 20 priority 33
1 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
1 _pthread_wqthread + 314 (libsystem_pthread.dylib) [0x7fff92ac5ef8]
1 _dispatch_worker_thread2 + 40 (libdispatch.dylib) [0x7fff92a46193]
1 _dispatch_root_queue_drain + 75 (libdispatch.dylib) [0x7fff92a44fa3]
1 _dispatch_queue_invoke + 110 (libdispatch.dylib) [0x7fff92a469dd]
1 _dispatch_queue_drain + 359 (libdispatch.dylib) [0x7fff92a45633]
1 _dispatch_source_invoke + 413 (libdispatch.dylib) [0x7fff92a458a1]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff92a432ad]
1 _dispatch_after_timer_callback + 77 (libdispatch.dylib) [0x7fff92a4b443]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff92a432ad]
1 ??? (spindump + 74771) [0x108ade413]
*1 hndl_alltraps + 219 (mach_kernel) [0xffffff80002f322b]
*1 user_trap + 748 (mach_kernel) [0xffffff80002dc26c]
*1 vm_fault + 2660 (mach_kernel) [0xffffff80002787a4]
*1 vm_fault_page + 3762 (mach_kernel) [0xffffff8000274ee2]
*1 vnode_pager_data_request + 99 (mach_kernel) [0xffffff800026c8c3]
*1 vnode_pager_cluster_read + 68 (mach_kernel) [0xffffff800026d464]
*1 vnode_pagein + 380 (mach_kernel) [0xffffff800063813c]
*1 VNOP_PAGEIN + 87 (mach_kernel) [0xffffff80003ffab7]
*1 hfs_vnop_pagein + 1059 (mach_kernel) [0xffffff800056fc63]
*1 decmpfs_pagein_compressed + 583 (mach_kernel) [0xffffff8000414ad7]
*1 ??? (mach_kernel + 2182785) [0xffffff8000414e81]
*1 vnode_fetch_uncompressed_data_Type4 + 108 (AppleFSCompressionTypeZlib) [0xffffff7f8167e5d4]
*1 doUncompressType4 + 198 (AppleFSCompressionTypeZlib) [0xffffff7f8167e414]
*1 chunkingDecompressor + 1274 (AppleFSCompressionTypeZlib) [0xffffff7f8167d0cb]
*1 inflate + 5332 (mach_kernel) [0xffffff8000670224]
*1 inflate_fast + 249 (mach_kernel) [0xffffff800067cf99]
Thread 0x5016 priority 33
1 start_wqthread + 13 (libsystem_pthread.dylib) [0x7fff92ac8fb9]
1 __workq_kernreturn + 10 (libsystem_kernel.dylib) [0x7fff91313e6a]
*1 wq_unpark_continue + 0 (pthread) [0xffffff7f80b4c6ae]
Binary Images:
0x108acc000 - 0x108af6ff7 spindump (161.2) <9E438D6C-B1E8-3AF4-AB03-67E2A8B4CF62> /usr/sbin/spindump
0x7fff8618b000 - 0x7fff86489fff com.apple.Foundation 6.9 (1056.13) <2EE9AB07-3EA0-37D3-B407-4A520F2CB497> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8bdc4000 - 0x7fff8bdcaff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
0x7fff8d30d000 - 0x7fff8d4baf27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
0x7fff8d4c0000 - 0x7fff8d4e4fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x7fff8d882000 - 0x7fff8d90bff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x7fff8fa2b000 - 0x7fff8fc10fff com.apple.CoreFoundation 6.9 (855.14) <617B8A7B-FAB2-3271-A09B-C542E351C532> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff9041b000 - 0x7fff9049bfff com.apple.CoreSymbolication 3.0 (141) <DC9F84AA-9BD0-322B-83C3-FDC1FA771F37> /System/Library/PrivateFrameworks/CoreSymbolication.framework/Versions/A/CoreSy mbolication
0x7fff912fe000 - 0x7fff9131aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff913cc000 - 0x7fff913cfff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff92433000 - 0x7fff9244eff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x7fff92a42000 - 0x7fff92a5cfff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
0x7fff92ac3000 - 0x7fff92acaff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
*0xffffff7f80b49000 - 0xffffff7f80b50fff com.apple.kec.pthread 1.0 (1) <619F6A5D-FFA2-3B59-9993-958FD7154B83> /System/Library/Extensions/pthread.kext/Contents/MacOS/pthread
*0xffffff7f8167c000 - 0xffffff7f8167effc com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 56 (1.0.0d1) <E163B7AE-F6E5-3286-B827-66DB3FE3DB7B> /System/Library/Extensions/AppleFSCompressionTypeZlib.kext/Contents/MacOS/Apple FSCompressionTypeZlib
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Process: kernel_task [0]
Path: kernel_task
Architecture: x86_64
Parent: kernel_task [0]
UID: 0
Version: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Task size: 174548 pages (+24)
CPU Time: 40.083s
Thread 0x1 priority 92
*101 vm_pageout_continue + 0 (mach_kernel) [0xffffff8000298de0]
Thread 0x2 priority 0 cpu time 9.917s
*76 idle_thread + 0 (mach_kernel) [0xffffff80002378f0]
*25 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*25 idle_thread + 24 (mach_kernel) [0xffffff8000237908]
*25 processor_idle + 170 (mach_kernel) [0xffffff80002375ba]
*25 machine_idle + 478 (mach_kernel) [0xffffff80002dd76e]
Thread 0x3 priority 95
*101 ??? (mach_kernel + 204976) [0xffffff80002320b0]
Thread 0x4 priority 80
*101 ??? (mach_kernel + 285456) [0xffffff8000245b10]
Thread 0x5 priority 93
*101 ??? (mach_kernel + 286176) [0xffffff8000245de0]
Thread 0x6 priority 95
*101 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*101 ??? (mach_kernel + 328449) [0xffffff8000250301]
*101 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*101 ??? (mach_kernel + 223627) [0xffffff800023698b]
*101 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Thread 0x7 priority 94
*101 ??? (mach_kernel + 302688) [0xffffff8000249e60]
Thread 0x8 priority 95
*101 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*101 mapping_replenish + 402 (mach_kernel) [0xffffff80002c8422]
*101 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*101 ??? (mach_kernel + 223627) [0xffffff800023698b]
*101 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Thread 0x9 priority 81
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0xb priority 81
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0xd priority 81 cpu time 0.006s
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x1d priority 81
*101 ??? (mach_kernel + 4069872) [0xffffff80005e19f0]
Thread 0x1f priority 81
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x21 priority 81
*101 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*101 pmInitThread + 899 (AppleIntelCPUPowerManagement) [0xffffff7f8154eb99]
*101 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*101 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*101 ??? (mach_kernel + 223627) [0xffffff800023698b]
*101 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Thread 0x24 priority 0 cpu time 10.027s
*81 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*81 idle_thread + 24 (mach_kernel) [0xffffff8000237908]
*81 processor_idle + 170 (mach_kernel) [0xffffff80002375ba]
*81 machine_idle + 478 (mach_kernel) [0xffffff80002dd76e]
*20 idle_thread + 0 (mach_kernel) [0xffffff80002378f0]
Thread 0x27 priority 0 cpu time 10.036s
*95 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*95 idle_thread + 24 (mach_kernel) [0xffffff8000237908]
*95 processor_idle + 170 (mach_kernel) [0xffffff80002375ba]
*95 machine_idle + 478 (mach_kernel) [0xffffff80002dd76e]
*6 idle_thread + 0 (mach_kernel) [0xffffff80002378f0]
Thread 0x2a priority 0 cpu time 10.042s
*98 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*98 idle_thread + 24 (mach_kernel) [0xffffff8000237908]
*98 processor_idle + 170 (mach_kernel) [0xffffff80002375ba]
*98 machine_idle + 478 (mach_kernel) [0xffffff80002dd76e]
*3 idle_thread + 0 (mach_kernel) [0xffffff80002378f0]
Thread 0x2f priority 81
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x5b priority 81 cpu time 0.001s
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x66 priority 81 cpu time 0.003s
*100 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
*1 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*1 IOWorkLoop::threadMain() + 23 (mach_kernel) [0xffffff80006acb97]
*1 IOWorkLoop::runEventSources() + 258 (mach_kernel) [0xffffff80006acac2]
*1 IOInterruptEventSource::checkForWork() + 256 (mach_kernel) [0xffffff80006ae020]
*1 AppleUSBEHCI::PollInterrupts(void (*)(void*, void*, int, unsigned int)) + 361 (AppleUSBEHCI) [0xffffff7f80e4c959]
*1 AppleUSBEHCI::scavengeCompletedTransactions(void (*)(void*, void*, int, unsigned int)) + 44 (AppleUSBEHCI) [0xffffff7f80e529fa]
*1 AppleUSBEHCI::scavengeAnEndpointQueue(IOUSBControllerListElement*, void (*)(void*, void*, int, unsigned int)) + 1060 (AppleUSBEHCI) [0xffffff7f80e529bc]
*1 AppleUSBEHCI::EHCIUIMDoDoneQueueProcessing(EHCIGeneralTransferDescriptor*, int, void (*)(void*, void*, int, unsigned int), EHCIGeneralTransferDescriptor*) + 1043 (AppleUSBEHCI) [0xffffff7f80e51103]
*1 IOUSBController::ControlPacketHandler(OSObject*, void*, int, unsigned int) + 1142 (IOUSBFamily) [0xffffff7f80c637e0]
*1 IOGeneralMemoryDescriptor::free() + 174 (mach_kernel) [0xffffff80006b7d2e]
*1 IOGeneralMemoryDescriptor::complete(unsigned int) + 321 (mach_kernel) [0xffffff80006b9f61]
*1 upl_commit + 37 (mach_kernel) [0xffffff800029e925]
*1 upl_commit_range + 540 (mach_kernel) [0xffffff800029d37c]
*1 lck_rw_lock_shared_gen + 118 (mach_kernel) [0xffffff80002d5156]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Thread 0x67 priority 81
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x77 priority 81
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x7c priority 81 cpu time 0.001s
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x85 priority 97
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x86 priority 97
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x8b priority 81
*101 IOWorkLoop::threadMain() + 0 (mach_kernel) [0xffffff80006acb80]
Thread 0x93 priority 81
*101 ??? (mach_kernel + 1934512) [0xffffff80003d84b0]
Thread 0x95 priority 81
*101 ??? (mach_kernel + 4244384) [0xffffff800060c3a0]
Thread 0x96 priority 81
*101 ??? (mach_kernel + 3843648) [0xffffff80005aa640]
Thread 0x97 priority 81
*101 ??? (mach_kernel + 3876960) [0xffffff80005b2860]
Thread 0x98 priority 81
*101 ??? (mach_kernel + 3876960) [0xffffff80005b2860]
Thread 0x99 priority 81
*101 ??? (mach_kernel + 3876960) [0xffffff80005b2860]
Thread 0x9a priority 81
*101 ??? (mach_kernel + 3876960) [0xffffff80005b2860]
Thread 0x9b priority 81
*101 ??? (mach_kernel + 4069872) [0xffffff80005e19f0]
Thread 0x9c priority 81
*101 ??? (mach_kernel + 4069872) [0xffffff80005e19f0]
Thread 0x9d priority 81
*101 call_continuation + 23 (mach -
Wait for a few minutes before starting a backgroung step in workflow
Dear All,
I have a requirement where in I have to make sure the user has completed a particular workitem. The workitem is to open the transaction PP02. I cannot make it asynchronous and use a terminating event as I could not see any logical place where I could trigger the terminating event on SAVE.
Now, I am trying to check if the database is updated on save of the transaction and before I do that I would want the workflow to wait for a few mintues.Is this approach correct?
Is there any way I can make the workflow to wait for a few mintues before it starts the next backgound step?
Please suggest.
Best Regards
VikramI think it is better option to use the WAIT Step
as you said that until you save the data in the trabsaction you don't want to proceed further then, try like this
Create a wait step and use the option wait for condition.
define a element in the workflow of type char01( assume TEST) .
Pass X to this element from the transaction when ever you save the data.
and define the condition for the wait step in such a way that until the value of TEST = X do not proceed further. -
Acer Aspire one will not boot up
When I boot up my Acer Aspire one I get a message that says:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "Repair your computer"
If you do not have this disc. contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000e
Info: An error occurred while attempting to read the boot configuration data.
The only problem is that my net book has no disc drive. What am I to do??From ABOUT:
Start
System Recovery Options.
There are several ways of starting System Recovery Options. See How To Access the System Recovery Options Menu in the link above for help.
Open Command Prompt from the System Recovery Options menu.
Note: The
Command Prompt available from the System Recovery Options menu is very similar to the one you may be familiar with within Windows. Also, the following procedure should work as described in both Windows 7 and Windows Vista.
At the prompt, type the bootrec
command as shown below and then press Enter:
bootrec /rebuildbcd
The bootrec command will search for Windows installations not included in the Boot Configuration Data and then ask you if you'd like to add one or more to it.
You should see one of the following messages at the
command line.
Option 1
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 0
The operation completed successfully.
Option 2
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
If you see:
Option 1: Move on to Step 5. This result most likely means that Windows installation data in the BCD store exists but bootrec couldn't find any
additional installations of Windows on your computer to add to the BCD. That's fine, you'll just need to take a few extra steps to rebuild the BCD.
Option 2: Enter Y or Yes to the
Add installation to boot list? question, after which you should see a
The operation completed successfully message, followed by a blinking cursor at the prompt. Finish up with Step 10 toward the bottom of the page.
Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.
At the prompt, execute the bcdedit command as shown and then press Enter:
bcdedit /export c:\bcdbackup
The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a
file extension.
The command should return the following on screen:
The operation completed successfully.
meaning the BCD export worked as expected.
At this point, you need to adjust several
file attributes for the BCD store so you can manipulate it.
At the prompt, execute the attrib command exactly like this:
attrib c:\boot\bcd -h -r -s
What you just did with the attrib command was remove the
hidden, read-only, and
system attributes from the file
bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.
To rename the BCD store, execute the ren command as shown:
ren c:\boot\bcd bcd.old
Now that the BCD store is renamed, you should now be able to successfully rebuild it, as you tried to do in Step 3.
Note: You could delete the BCD file entirely since you're about to create a new one. However, renaming the existing BCD accomplishes the same thing since it's now unavailable to Windows, plus provides you yet another layer of backup, in
addition to the export you did in Step 5, if you decide to undo your actions.
Try rebuilding the BCD again by executing the following, followed by Enter:
bootrec /rebuildbcd
which should produce this in the Command Prompt window:
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
meaning that the BCD store rebuild is progressing as expected.
At the Add installation to boot list? question, type Enter Y or
Yes, followed by the Enter key.
You should see this on screen:
The operation completed successfully.
meaning that the BCD rebuild is complete.
Restart your computer.
Assuming that an issue with the BCD store was the only problem, Windows should start as expected.
If not, continue to troubleshoot whatever specific issue you're seeing that's preventing Windows from booting normally.
Important: Depending on how you started System Recovery Options, you may need to remove a disc or
flash drive before restarting. -
Acer Aspire V5-571 will not power on
Apologies - just posted this question in Welcome Forum by mistake.Computer will not power on, was working perfectly last night when I shut down. Have tried all suggestions in Knowledge Base with no success. Any help very much appreciated. Thanks in advance.
I have had this problem twice now. My system is working just fine. I power it down and take it to work or home. I get to my destination and plug in my system and i get NO lights of any kind. It will not power up at all. I get NOTHING. My laptop is all of a month old. I pull out my screwdriver and take off the bottom cover. I check connections etc. Everthing is tight and clean. BUT note that I have touched several metal components. Did I just ground out any stray charges? I don't know. But Now after doing nothing more then looking and touching I put the case back together. Turn if over and plug everythign back in again and NOW it powers up. The second time same thing only this time it gets to the Acer screen and nothing. I power off/on and try again. Acer screen. After 2 cycles of this I swap out the power block (19V @ 3.42A acer just like the original). After 2 more cycles I swap back to the original. I try #5 and i'm getting ready to power off again when I get the floting balls wait sign and I wait.... now up until now boot up on windows 8 has always been less then a minute. This time its taken like 6 minutes to boot up. NOTE It updated to 8.1 last thursday (I HATE auto updating! it is now turned off!). So any ideas here? is this a static buildup issue? Is this a design issue? Power board or plug issue? What is the problem here Acer. I LOVE my 1st acer aspire 5210z until the screen died. So I buy the awesome new one and ACER HELP!!!!
-
[Solved] NVidia Drivers on an Acer Aspire 7520
I'll keep it short and simple. I got this laptop, an Acer Aspire 7520.
Everything works. Except the graphics in Arch.
I've had to fall back on using nouveau instead of the nvidia driver - maybe it is or isn't better, but I can't get the nvidia one to work.
When installing Arch, when the time comes to test X, is fails with the error that it can't load the .ko module. Can be reproduced also by trying to run 'modprobe nvidia' as root.
Given that my attempts to try and put up with Vista just came to a stop with it's rather poor excuse for a network manager being incapable of getting an IP address from the DHCP server, I'd like to get this sorted.
Oh, almost forgot. The laptop is 64-bit capable - but with approx 2GB of RAM, even though it's a dual core, the benefits of running a 64-bit OS on it probably wouldn't show up. So it's a 32-bit Arch instead.
Besides, Arch64 is a pest when it comes to stuff not made for x86_64.
Anyway.
That's the problem. Is there a fix for this, which doesn't involve using a different driver?
Thanks,
Grem.
Last edited by Gremnon (2010-08-08 22:37:23)This is what is currently in the 10-monitor.conf file:
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900_60"
EndSubSection
EndSection
To change it to nvidia, I'm unfortunately at a loss for what to put in exactly.
'uname -r' returns:
2.6.24-ARCH
I use the stock kernel. I haven't felt adventurous enough to try making my own custom one yet, which is one of the reasons I went off Gentoo. They can claim it's easy all they like, my only attempt on Gentoo didn't work in the slightest.
Anyway.
Unless I'm looking in the wrong place, running 'tail /var/log/dmesg.log' both before and after modprobe shows absolutely no difference at all. Nothing is added to it in the slightest. -
Acer aspire v5 131 start up issues
Hello, I have an Acer aspire v5-131 and its 2 years old. It's windows 8 I got the message where I can auto update to windows 10 so I decided to do that but never noticed any difference. The problem where it can't get past the start up and there's 3 different types. 1. It shows the acer logo and the loading animation but then the screen goes black after 10 minutes. 2. It says preparing automatic repair then the screen goes black after 10 minutes. 3. It says "Scanning and repairing drive (C but stops at 47%. I've waited 3 hours but it still didn't progress after that.
if you don't have a recovery media, please download the iso for windows 10 and create a bootable media with it:https://www.microsoft.com/en-us/software-download/windows10 once done, try to boot from it, press F12 at boot and select your bootable media. if it boots try to enter safe mode as i wrote in my previous post.
-
[Solved] Suspend to ram doesn't work correctly on Acer Aspire 5100
Hi people of the archlinux forum.
Finally I decided to change from ubuntu to archlinux because I wanted to learn more about the world of linux.:D
I have already almost completely set up my laptop, but I have a problem when suspending to ram. The problem comes out when i wake up the laptop, and the screen starts to flicker and will not go away until i restart the laptop.
This is my laptop after the suspend:
I'm using pm-utils to suspend and hibernate my laptop, and the hibernate works fine. All settings were made following the arch wiki.
this is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "glx"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "2174"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS482 [Radeon Xpress 200M]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I know you maybe need more info, but i don't really know what do you need... please tell me what do you need and a post it!
Sorry for my english this isn't my native languaje... Thanks you for all
Last edited by geonunez (2010-07-08 20:19:09)I have the same problem with my Acer Aspire 5100 (video ATI Xpress1100).
xorg.conf is not used. Turning KMS off doesn`t help.
I have tried to use uswsusp, but it doesn`t help. s2ram -n output correctly identify my laptop, which means it is in "whitelist" and correct settings for this hardware is known. s2ram suspend works, but screen blinking after waking up remains the same.
[Sydorenko@SLE ~]$ sudo s2ram -n
Machine matched entry 17:
sys_vendor = 'Acer *'
sys_product = 'Aspire 5100 *'
sys_version = ''
bios_version = ''
Fixes: 0x3 S3_BIOS S3_MODE
This machine can be identified by:
sys_vendor = "Acer "
sys_product = "Aspire 5100 "
sys_version = "V3.10A"
bios_version = "V3.10A"
See http://suspend.sf.net/s2ram-support.html for details.
Last edited by SydMax (2010-06-06 16:53:50) -
I have been unable to download adobe acrobat pro, which I purchased on a month to month basis almost exactly 1 year ago, since I purchased it. I just received a renewal email and it had a link to download the program and for the first time when I clicked on the link it actually sent me to a page that had the icon to download now. I clicked on that, but when I went to open the file and start downloading after about 3 minutes into downloading it says an error had occurred. Can anyone help me?
I am a little worried. If you are an existing subscriber why would Adobe need you to download... I wonder if the message is a fake.
I'm not clear, if you've had it for a year, whether you need to download, or you are just following the email?
This page with the icon to download now. Was it a page on adobe.com ? -
Can't boot Arch from USB on Acer Aspire One...
Hi All,
New to the forums, relatively new to Linux. I've tried several distros including #!, U/K/Xubuntu, Mint, Kuki, Puppy and Wolvix. However none of them, except maybe Mint, have played very nicely with my Acer Aspire One netbook. Even Kuki was a bit of a disaster, though I liked the Midori browser, first time I'd used it was under Kuki.
Intro aside, I want to try Arch. I am not scared of a bit of hands-on work via CLI, although am certainly no expert when it comes to CLI & Linux!
The problem is, I created a USB install for the latest 32bit version of Arch using Unetbootin (I tried both under Windows and Linux, creating USB live sticks with both). However when I try to boot from USB, all goes well until just after a message during the boot process appears. I forget off the top of my head what the error message says, though it appears after successfully waiting 30 seconds to discover a SCSI drive (or something along those lines).
The error has nothing to do with the drive, it's related to the step in the boot process that comes after that. Whatever the message is (I'm at work so cannot access logs or anything right now) it ends up asking me to resolve from a CLI prompt, which then leaves me with a prompt dialog, or to restart and try again.
Nothing seems to work so I am not sure what I am doing wrong or if it might be a bug with Unetbootin or a bug with the latest version of Arch? Or simply a good old fashioned ID10T error?
Any help would be greatly appreciated. Thanks!Thanks! I'll mark this as an ID10T error for now then. I'll give the USB install image a try tonight. On a side note, does Arch come with Skype pre-installed and if not, is it relatively simple to install a la the *.deb package install?
-
[HOWTO] Installing Arch Linux stable release on Acer Aspire One 522
[This is a work on progress and my first howto ever]
These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
This Howto borns with the intention to address this problem.
You need to be familiarized with Linux internals to follow this howto.
(Expect this howto to become useless with new stable releases of ArchLinux.)
Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
Just boot with systemrescuecd
Mount your external harddisk on /mnt/floppy for example
Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
Result image was about 22GB size
This image will restore partition table, boot sector and all data if things go wrong.
I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
If you have some Gentoo Linux experience you will find those steps really familiar.
You will need 2 USB pendrives or similar storage options.
One is needed to boot into your netbook, and the other to store our custom archlinux build.
Making an updated ArchLinux system
1) Make a local dir on your existing linux system
# mkdir ./newarch
2) Install pacman database on it
# pacman -Sy -r ./newarch
3) Install base system
# pacman -S base -r ./newarch
4) Let's chroot inside
# cp /etc/resolv.conf ./newarch/etc/
# cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
# mount -t proc proc ./newarch/proc
# mount -t sysfs sys ./newarch/sys
# mount -o bind /dev ./newarch/dev
# chroot ./newarch /bin/bash
5) Edit configuration files
# nano -w /etc/rc.conf
# nano -w /etc/hosts
# nano -w /etc/mkinitcpio.conf
Forget /etc/fstab for now since you don't know what partitions to use yet
6) Generate kernel image
# mkinitcpio -p kernel26
7) Generate locales
# nano -w /etc/locale.gen
# locale-gen
8) Make a tarball with our custom ArchLinux
# exit
# umount ./newarch/proc
# umount ./newarch/dev
# umount ./newarch/sys
# tar -cvpf newarch.tar ./newarch
9) Copy this tarball to an USB pendrive or external harddisk
10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
You should be booting into SystemRescueCD without any problem.
After initialization you will end in a root prompt.
11) Let's partition the disk
You will find 3 partitions if this is your first time:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
You have plenty of space with sda3, about 230G.
So run fdisk/cfdisk and delete /dev/sda3
Now create a 100M partition for boot
Now create a Extended partition with all the space left
Now create a 1GB logical partition for swap
Now create a 10-15 GB logical partition for root system
And finally a logical partition for our home partition with all space left
Your partition table should look like this:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 29771775 102400 83 Linux
/dev/sda4 29771776 488397167 229312696 5 Extended
/dev/sda5 29773824 31821823 1024000 83 Linux
/dev/sda6 31823872 63281151 15728640 83 Linux
/dev/sda7 63283200 488397167 212556984 83 Linux
12) Create filesystems
I choosed ext2 for boot, and reiserfs for root and home partitions.
# mke2fs /dev/sda3
# mkreiserfs /dev/sda6
# mkreiserfs /dev/sda7
# mkswap /dev/sda5
13) Mount partitions
# mkdir arch
# mount /dev/sda6 arch
# mkdir arch/boot
# mount /dev/sda3 arch/boot
# mkdir arch/home
# mount /dev/sda7 arch/home
14) Copy our custom ArchLinux build on it
# mount /dev/sdb1 /mnt/floppy (for example)
# cd arch
# tar -xvpf /mnt/flopy/newarch.tar
15) Configure /etc/fstab
Mine is as follows:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda3 /boot ext2 defaults 0 1
/dev/sda6 / reiserfs defaults 0 1
/dev/sda7 /home reiserfs defaults 0 1
/dev/sda5 swap swap defaults 0 0
16) Chroot in your new system
# mount -t proc proc ./proc
# mount -t sysfs sys ./sys
# mount -o bind /dev ./dev
# chroot ./ /bin/bash
17) Install grub
# grub-install
Edit /boot/grub/menu.lst to suit your needs
Mine looks like this:
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26.img
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26-fallback.img
title Windows 7 Recovery
rootnoverify (hd0,0)
makeactive
chainloader +1
As you see, you can restore Windows 7 Starter from Grub.
18) Change root password
# passwd
19) Add a regular user account
# useradd -G video,audio,users -m username
# passwd username
20) You're done!
# exit
# cd ..
# umount ./arch/proc
# umount ./arch/dev
# umount ./arch/sys
# umount ./arch/boot
# umount ./arch/
# reboot
Remove the usb stick from your netbook.
If all went ok, you will be inside your new stable and updated ArchLinux system
Next post is reserved for software configurations specific to the Acer Aspire One 522
Last edited by tigrezno (2011-04-20 12:22:38)Using acpid to achieve the following:
- Change screen brightness when operating in battery mode
- Power off when the power button is pressed
- Suspend when the lid is down
- Reduce CPU frequency speed to maximize battery usage
Remember that system suspend is only supported by ati free driver xf86-video-ati
1) Install acpid daemon and cpufrequtils
# pacman -S apcid cpufrequtils
2) edit acpid handler script
# nano -w /etc/acpi/handler.sh
Change the following section:
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
for:
ac_adapter)
case "$2" in
ACAD)
case "$4" in
00000000)
echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 800Mhz
cpufreq-set -c 1 -f 800Mhz
00000001)
echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 1000Mhz
cpufreq-set -c 1 -f 1000Mhz
esac
*) logger "ACPI action undefined: $2" ;;
esac
Make sure you changed AC) for ACAD)
Now change this other section:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
with:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) poweroff ;;
*) logger "ACPI action undefined: $2" ;;
esac
Change:
button/lid)
#echo "LID switched!">/dev/tty5
logger "ACPI group/action undefined: $1 / $2"
for:
button/lid)
pm-suspend && /etc/rc.d/network restart
logger "ACPI group/action undefined: $1 / $2"
Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
3) Start acpid and load modules
# modprobe powernow-k8
# /etc/rc.d/acpid start
Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
Stopping system freezes due to ethernet driver
The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
MODULES=(!ath9k !atl1c)
Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
Correctly starting wireless at boot
I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
wi_up()
eval iwcfg="\$wlan_${1}"
[[ ! $iwcfg ]] && return 0
/usr/sbin/iwconfig $iwcfg
[[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
sleep $WIRELESS_TIMEOUT
/usr/sbin/iwconfig $iwcfg
bssid=$(iwgetid $1 -ra)
It will do the trick and will start at boot correctly. This is not a solution but a fix.
Adjust Touchpad to disable false taps
What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
This means you can write and press space without having the cursor click out of the window and such.
# synclient AreaLeftEdge=150
# synclient AreaRightEdge=1300
# synclient AreaTopEdge=300
Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "AreaTopEdge" "300"
Option "AreaLeftEdge" "150"
Option "AreaRightEdge" "1300"
EndSection
You can play with those values. They just work for me.
Last edited by tigrezno (2011-04-23 13:49:48) -
New Printer HP2540/301 Acer Aspire 1 laptop has no disk drive and an idiot user. PLEASE HELP....
I bought myself a nice new 5240 all in one 301 printer on Wednesday.
Since then i have done nothing but fight with it ever since.
My laptop is an Acer Aspire one, one of the smaller ones, which unfortunately doesnt have a disk drive in it. My first thought went to downloading drivers. The web page didnt work and i realised then, that without the user manual (which i suspect is on the disk) i am totally lost.
So could someone please help me.
I have done a print out, which says.
Check your HP printer network name (SSID) matches your wireless router network name (SSID) exactly.
If they do not match exactly, run the wireless set up from the printer software to configure your HP printer.
I am assuming this is the software on the disk. Is there a way of downloading the software from online?
Any help would be gratefully accepted as i have no clue what i am doing atm. I am only just starting to learn how to use Windows 8 properly atm, up until now my whole computer skills hass been how to open a browser and office.
Thank you.i should also add, i have downloaded the app too, but that doesnt recognise that there is a printer there at all.
This question was solved.
View Solution.Hi, here is the link for the driver.
Link for the user's guide.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc
Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well. -
Can anyone tell me how to update my bios in my Acer aspire 5610Z laptop. I installed Ubuntu Linux
I installed Ubuntu Linux in my Acer Aspire 5610Z laptop and all was fine until the latest updates came in. I inquired about the problem and I was told that I needed the newer version of bios. My laptop uses Pheonix WinPhlash bios and I cannot make it work through Ubuntu. Iwould appreciate any help that anyone might be able to give me. The keyboard does not work correctly and the person at Ubuntu assured me that it was the bios causing the problem. My laptop originally came with a Windows Vista installation disk. Thanks in advance.Rich S.
I had no problems with Ubuntu version 13. I started having problems with my keyboard after it upgraded to 14.04. I filed a bug / problem report with Ubuntu and I was told it was my out dated bios version 3.50. I went through hell trying to update it to bios version 3.60 but after many frustrating hours I finally ended up puting in Windows 2000 and updating WinPhlash through it. I had wiped my hard drive, reformatted it and it would no longer install Windows Vista. I can't figure that one out at all? After going through about two weeks of failure I finally got bios 3.60 installed. It did not change anything. The keyboard of the laptop worked just fine with Windows. When I put Ubuntu back it I had the same old ball game. I have to use a USB keyboard. I installed Ubuntu 15.04 (advice from my learned son) that produce no change either. Now, I had been going on the asumption that the fellow from Ubuntu knew what he was talking about since he assured me that it was a "buggy bios" version 3.50 causing the keyboard problem. I did a Google search only to find out that laptop keyboard problems are a very common thing with almost all versions of Ubuntu, especially version 14.04. I was told there is a Kernel 4.1 that may solve the problem but I do not understand Kernels very well and I fear I may mess things up and will have to start all over a again. I shall find out.
Maybe you are looking for
-
Blackberry app world not working. Please help me.
Okay, basically I'm having this major problem. I have a blackberry torch 9800. I've just had my phone replaced as I dropped it into a puddle.. So i'm happy I got a replacement phone, the only problem I'm having is downloading one app in particular. I
-
Frame 12 install options question
In the Frame 12 install, a box comes up with Options: -Adobe Framemaker 12 1.3 GB On the side panel is a tick box with Adobe Framemaker and then indented under that is Adobe PDF Creation Add-On XI 156 MB -Adobe ExtendScript Toolkit CC Here are my qu
-
Is anyone familair with a php form script that generates a random letter/number combo? I don't know officially what that is called but I have seen it on sites where you have to enter a code to submit.
-
8 Channel Mixer That Accepts Optical Inputs
Greetings- I am looking for an affordable 8-12 channel audio mixer that accepts at least 2 optical inputs. Are any of you knowledgeable users aware of such a device? Thanks- -DaddyPaycheck
-
Significance of Preliminary cost estimate,
Hi experts, My clinet is using REM scenairo and in REM profile we have maintained "Backflush using standard cost estimate". My question is in this case what is the significance of preliminary cost estimate(PCE)? and I would able to confirm (MFBF) wit