Acer Aspire 5750 Problems in Error.log

Hello,
I installed Arch on a Acer Aspire 5750 with:
i3-2330M CPU @ 2.20GHz
4 GB Ram
and Arch runs very well!
But by every boot of Arch I got this errors:
1: /usr/sbin/crond[469]: (CRON) INFO (Syslog will be used instead of sendmail.): Datei oder Verzeichnis nicht gefunden
But I do not ever install sendmail ...
2: kernel: [ 6.146484] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
3: kernel: [ 6.194110] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
4: kernel: [ 7.260867] nouveau 0000:01:00.0: Invalid ROM contents
5: kernel: [ 15.228768] [drm] nouveau 0000:01:00.0: 0xD518: i2c wr fail: -6
and I got a wlan error, but my wlan works very well.
My Arch runs well with this errors... I think this errors are not so bad, but I want to boot arch very fast and with this error messages I need 50 seconds...
The other Problem:
In the Wiki I read something about fgetty and agetty... I replaces agetty with fgetty in /etc/inittab and I installed fgetty via yaourt But I still got an fgetty error:
init: cannot execute "/sbin/fgetty"
But the /sbin/fgetty is there...
Can someone help me with this problems?
Thanks!

1: /usr/sbin/crond[469]: (CRON) INFO (Syslog will be used instead of sendmail.): Datei oder Verzeichnis nicht gefunden
But I do not ever install sendmail ...
That is just telling you that syslog will be used instead of sendmail, because there is no sendmail program to use on the system.
2: kernel: [ 6.146484] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
Does your sd card reader work properly? I use to get that error before I noticed it did not work. I fixed it by adding this to modprobe.conf
options sdhci debug_quirks=0x40
Not really sure on the other two as I try to avoid nouveau use personally and have never seen that intel related error on mine either and have not done fgetty on my systems.
Hope that gets you some place
Last edited by vwyodajl (2012-02-20 19:09:34)

Similar Messages

HI i need help overclocking my acer aspire 5750-6872 can some one help me do this?

Hi, i download the extreme tuning utility program, it tells me all the information that i need to know about the laptop but it does not let me use the manual tuning feature. I would like to know if anyone else has experienced this problem, and can help me figure out what is going on. I also have the intel turbo boost monitoring tool. (which is kind of useless at this point) The laptop is a acer aspire 5750-6872 intel core i5-2430M 2.4GHz with turbo boost up to 3.0GHz (can i use the turbo boost manually or is it automatic) I would also like to manually tune the graphic options as well, its a intel HD Graphics 3000, up to 1760 MB Dynamic video memory.

M325i,
The turbo boost function is automatically controlled by the operating system, it is not something that can be manually operated.
I do not believe there is any way to manually adjust the amount of video RAM to be used, other than in the BIOS, but even that is going to be limited on how much you could possibly set it to (if any adjustment at all), I believe it is dynamically done by the operating system as well.

How long do I have to wait until I can get Windows 10 on my Acer Aspire 5750?

It says, "Ok, nodify me when it is ready" from the "Get Windows 10 app"

you can download it from Microsoft download tool:http://www.microsoft.com/en-us/software-download/windows10

Acer Aspire 7750g Power button board compatibility

Hey guys! First post here on the Acer community forum. I have a question regarding my Acer Aspire 7750g. I bought & installed a new motherboard but I've been dealing with a major issue concerning the power button board. It seems to either have stopped working or the ribbon has shorted out, I don't have the means to test which part is defective, but no power is running to the power button board so I can't turn it on. I've been searching all over the place for a replacement power button board to no avail, but came across one for an Acer Aspire 5750. I know that certain components are interchangeable between both laptops but I don't know about this particular piece.
Are there any experts out here that can verify if getting a 5750 power button board would work? Or could this cause some potential problems to the new motherboard? I'm desperate to get this machine back running so that I can work again. Oh, and if anyone knows where I can get a 7750 power button board for a decent price in case the 5750 board doesn't work I would be greatly appreciative.
Thank you

Hello, Aspire 7750g (7750 series and 7560 series):55.RB002.001POWER BD Aspire 5750:55.RFD02.001POWER BD They are not compatible.

KDE 4.4.0 crashes when logging in on Acer Aspire One

Hello,
I just made an ArchLinux fresh installation on my Acer Aspire One, A1-ZG5. This is my problem: when I log in to KDE, the splash screen comes and then screen freezes. There is one gray window in the top of the screen that just flashes, no windows nor plasma can be seen. I have installed other KDE distros in the same netbook and worked well. I had had the same problem once, when I installed KDE 4.3.1, and never could fix it... KDE seems to be working like in the background; config files are still being created with the frozen screen...any ideas?...Thanks for your help!...:rolleyes:

is your disk full?
if not, try to switch off the services, remone network-manager plasmoids, and try again

Problem with touchpad and Windows 8.1. Acer Aspire E5-511

I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).

SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone

Acer Aspire V5|123 - Shutting Down Problems

Hi,
I have bought an Acer Aspire V5|123 netbook yesterday. I had done a clean install of Windows 8.1 (with Pro). At the moment I was trying to do some updates on this netbook to get to the latest updates. But each time this netbook updates, the shut down method is taking like 3 mins to boot back up again which is taking longer than usuall!
I have a Compaq (from HP) computer which has Windows 8.1, the computer I use mostly is this - the boot up and shut down times are fast and quick. The operating system runs smoothly on it and it works fine and never had a problem for a few months now!
Also, the power button light stays on for like 5 mins after the Windows shut down. So, I have been surfing on the web to find a solution to this simular problem. I have found out a forum thread with someone answering about replacing the battery or replace the BIOS battery with a new one and see if that solves the problem.
Thanks!
Best Regards,
Benjamin
[edited for privacy-please do not post personal or unique information such as but not limited to full names, email addresses, phone numbers, serial numbers, etc.]

UPDATE: Opened the machine to change the coin-cell battery and re-insert the memory card to see if this has solved the problem. Which it hasn't! Any solutions anybody?

Error logging problem:

error logging problem:
I would like to implement an error logger that will do the following tasks when a error/exception arrises:
- surpress the DacfErrorPopupLogger
- alert the user that an error has occured with a simplified popup (create a global listener then use the ErrorAttributes to create the text of the popup)
- log the error in a file with a timestamp and all error information
- later if the above works....i would like to add the error attributes (time stamp, error type) to a oracle object/ Jdev domain.
Questions:
What is the best technique to use....errorManager, error logger ...?? combination
How do i use the error manager to register listners for the errors?.
In the following code i am not sure how to access the ErrorsAttributes[] array that is returned by loggerReader.getErrors();
Any general tips places to find sample code on errorManager or associated interfaces, will be appreciated
I used the OutPutStreamLogger to write error information to a FileOutputStream then a loggerReader to get the error attributes from the file. The reason i went in this direction is because i found some smple code on the outputStream logger.
package DACVideo;
import oracle.dacf.util.errorloggers.*;
import oracle.dacf.util.errormanager.*;
import oracle.dacf.util.errorloggers.InputStreamLoggerReader.ErrorAttributes;
import java.io.*;
* A Class class.
* <P>
* @author Adam Maddox
public class ErrorLogger extends Object {
static OutputStreamLogger logger = null;
static InputStreamLoggerReader loggerReader = null;
public ErrorLogger() {
System.out.println("==============ErrorLogger Created==============");
//remove default error logger (popup logger)
ErrorManager.removeErrorLogger(ErrorManager.findLoggerByName(DacfErrorPopupLogger.NAME));
try
logger = new OutputStreamLogger(new FileOutputStream("out.dat"));
loggerReader = new InputStreamLoggerReader(new FileInputStream("out.dat"));
catch(java.io.IOException e)
System.err.println("Error!");
try
ErrorManager.addErrorLogger(logger);
catch(NameAlreadyRegisteredException e)
System.err.println("A Logger with this name is already registered.");
private void closeErrorLog()
//close the OutputStream, to force flushing
logger.closeOutputStream();
ErrorManager.removeErrorLogger(logger);
public static void showErrorLog()
ErrorAttributes[] errorArray = loggerReader.getErrors(); <<<<CANNOT GET ERROR ATTRIBUTES ??
null

JDev could you help??

Suspend problem ACER Aspire

Hello!I have an ACER Aspire 5920G and running arch linux with KDEmod 4.1, smoothly except for some minor problems...The most important of them is that the computer cannot suspend when I set it to suspend (to disk or to ram) eg. after 20 minutes.When I press the power button or pm-suspend, or any manual way it suspends....It won't suspend after the time runs out!I have powerdevil and guidance power manager installed...I also don't understand what's the purpose of power control in system settings->Display, since it also does nothing when enabled...please help me I need my computer to suspend when idle...Thank you very much!

I just realised that if I configure it from powerdevil to suspend after 1 minute, ita does suspend...But eg after 5 minutes it does not.I believe tha the screensaver causes it to not suspend as it starts after 3 minutes...Can you please tell me what to do to whitelist the screensaver for powerdevil?(if that's the problem...)

Acer aspire zs600 recovery error; "restore failed - can not find image path"

Recently the hard drive in my Acer Aspire ZS600 failed. I purchased a new hard drive and the recovery media disks from Acer's website. However after installing the new drive and running the recovery disks, the third and final disk ejects with the error message "Restore Failed - Can not fine image path: M:\RecoveryImage\install.wim" I have searched these forums as well as the farthest reaches my googling skills will allow and I have not found a solution that works. I am fairly certain it is not an issue with my hard drive, optical disk drive or the recovery media itself. Any insight on this issue will be greatly appreciated.

i presume that your new HDD was completly clean, you didn't format or create partition prior to use the Acer erecovery medias. in a past thread there was a similar issue and Acer-Justin found the solution, i sent him a PM.

Problem with Acer Aspire 5920 CPU swap

Hi everyone,
I have an Acer Aspire 5920 with Windows 10 x64. I'm going to say right off that I am not experienced in swapping processors, but did what I thought was the right thing. I removed the battery and drained the laptop of power. I took out the old processor (T5450) and put in the "new" processor (T9300) and applied thermal grease and put the heatsink and fan back in place. I put everything else back in place and turned the laptop back on. It ran great for about five minutes, when suddenly I got a blue screen with a "WHEA_UNCORRECTABLE_ERROR" message. After that, the computer kept trying to restart itself. A few more messages popped up such as "CRITICAL_PROCESS_DIED".
Thinking it might be an overheating issue, I turned the laptop off for a little while and turned it back on. From what I understand, this processor should run a little cooler, or at least the same temperatures. The computer booted sucsessfully again and I quickly went to HWiNFO to see the reported temps for the GPU and CPU, both were mid-30's. About ten seconds after running the program, the computer crashed again with the same errors. Could the reported temps be faulty, or is it something different wrong? The BIOS correctly identifies the CPU as T9300.
I'm at a loss here. Thanks for any help offered!

I didn't get the chipset driver, but how can I install it if I can't keep it on long enough to do anything? Do I need to install it with old processor in? I did try reseating it twice, but no luck. Not sure how to tell if it's an ES, but I don't think so. I didn't see ES on the processor itself. I noticed a few notches on the edge of the processor, so it's possible it could be damaged. I have a few pictures to share also. Will have more when camera batteries charge. Ever since I tried to replace the processor, this red light has been on. It's quite bright. Not sure if it has a significant meaning. It was never on before. It remained on when I put the old processor back in. Temps seem to be in normal range. This is with old processor, though. T9300 had similar readings before crash.

Acer Aspire 3820TG Graphics problem

Hello! I just recently updated my Acer Aspire Timeline X 3920TG to windows 10. The installer reported that there should be no problems, and all seemed well, installation went painless.
However, I soon discovered some problems with the drivers for the graphics card, an AMD Radeon HD 6550M. - The card is reported as a "5000 series" card, not 6000. Some people have mentioned that it is just a rebranded 5000 card, but it has shown up as 6550M before.- The HDMI connector is not working, and as such I cannot use my TV for a second screen. Worked fine before installing windows 10, but not now.- Civ 5 does not start with DX9 any more. DX 11 works fine.
- Way of the Samurai 4 has started lagging seriously. Not much framedrop, but everything is in slow motion, and it responds very slowly to controls. Again, worked fine in windows 7. I have googled for solutions, reinstalled drivers, killed all drivers and tried to reinstall both directly from AMD, Acer and Microsofts update service, but to no avail. Please help. Is this a lost cause or is there a solution?

Too bad. I took the plunge to downgrade again to windows 7, which was as easy as upgrading to 10, thankfully. Gotta give them credit for that at least.
Works perfectly in 7, so I guess I'll have to live with this until I upgrade to a newer laptop. =/

Acer Aspire Switch 10 e keyboard dock problem

Hi. I have this brand new Acer Aspire Switch 10 E which I just bought last month. I'm now having problems with the keyboard and the dock as when I connect the tablet/screen to the dock, the keyboard is not detected. It recognizeswhen I dock the tablet but it doesn't detect te hard drive nor the keyboard. Sometime, after a long while, it detects the keyboard and the hard drive but only for a few seconds then it disappears again. Other times, it just flips continually from working and then not working. The problem is so sudden. I would jokingly note that whenever I search for solutions to the keyboard problem, it very briefly fixes itself. On a serious note however, I do not know what causes this malfunction nor do I know what fixes it. As stated above, the problem is so sudden. I have been very, very careful with the use of my laptop including in the removal and docking of the tablet. I have inspected the docking pins, and physically, they look perfectly fine. The problem occurs even the tablet has been connected and left undisturbed for continuous periods of time. This has led me to believe that the problem could be software based and not hardware. I am also open to the possibility that it could be heat affecting the docking pins (heat can cause connection issues and this isn't the first time I have encountered one, nor the second) but like I said, the docking pins work perfectly and remain constantly in contact witch each other. As I have postulated that the problem is software based, I have gone through the hassles of searching for possibble drivers for the dock/keyboard. Unfortunately, (this might be due to the Aspire Switch 10 E being a fairly new model) there were no keyboard drivers on the Acer support page for the Aspire Switch 10 E. In my search, I encountered a video for the Aspire Switch 10 keyboard to fix the problem, a driver update for the Switch 10, NOT the Switch 10 E. I have tried the solution and it still does not work. I am not a fan of forums and if I am, I am usually just a reader kind of person. But in the light of recent events and the fact that there are virtually NO questions or posts about this brand new model of laptop, specfically the Aspire Switch 10 E, I have taken the responsibility of raising this question in the hopes that a knowledgeable person may provide assistance and that the others of my kind (the Aspire Switch 10 E users) may be enlightened as well. I would sincerely appreciate the assistance. God bless. TL;DR: Aspire Switch 10 E detects docking but keyboard and hard drive are inconsistently not working. Help. Reposted this topic on the laptops forum because I realized I posted the first one in desktops.

Hi, I have a similar problem. Sometimes after waking or after removing or reataching the keyboard it becomes unresponsive. But if I then restart the computer it is fine. I think, in my case at least, it can not be due to just a bad connection, as otherwise restarting it would not change anything. Also, I don't think it is something that has been fixed as it is quite a recent purchase and I have recently updated windows and drivers. The whole reason for choosing this pc was the ease with which it converts between tablet and laptop mode so any advice would be very welcome. Thanks,Tom

Acer Aspire One, modules load failed and autologin problem

Hi,
I am having problem with modules loading. I haven't updated my netbook for a month or so (my motherboard was broken and it took me that long to finally repair it). After updating, which took ages and the installation size was about 2,2 GBs I have come across two problems.
First one is modules loading being failed. On boot, everything is said to be DONE in green but with modules I get red FAIL. I am not an advanced user, so I don't really know what to paste, so I'll paste errors.log
Oct 20 20:18:26 localhost kernel: [ 0.217828] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
Oct 20 20:18:26 localhost kernel: [ 0.217907] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
Oct 20 20:18:36 localhost kernel: [ 18.740305] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
Oct 20 20:18:36 localhost kernel: [ 18.740321] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
Oct 20 20:18:36 localhost kernel: [ 18.849318] pciehp 0000:00:1c.2:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
Oct 20 20:18:36 localhost kernel: [ 18.849332] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:03:00
Oct 20 20:18:36 localhost kernel: [ 18.956303] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
Oct 20 20:18:36 localhost kernel: [ 18.956318] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00
Oct 20 20:18:37 localhost dhcpcd[3196]: dhcpcd not running
Oct 20 20:18:38 localhost dhcpcd[3202]: dhcpcd not running
Oct 20 20:18:38 localhost dhcpcd[3209]: dhcpcd not running
Another problem is with SLiM, or at least logging. I have my /home partition on my SD card. From time to time when I turn my computer on, I am being logged as root, not as my user. When I logout and login again, everything is fine. My slim.log
/usr/bin/xauth: file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH i686
Current Operating System: Linux archone 2.6.34-netbook #3 SMP Sat Jul 17 19:18:04 UTC 2010 i686
Kernel command line: root=/dev/sda1 ro rootfstype=ext4 checkdisk quiet
Build Date: 17 September 2011 07:40:13AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 20:18:25 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
/usr/bin/xauth: file /home/archone/.Xauthority does not exist
which: no hsetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
which: no esetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-X-utilities.c:cairo_dock_support_X_extension:581) [0m
The dock was not compiled with the X extensions (XComposite, xinerama, xtst, XDamage, etc).
** (gsynaptics-init:3145): WARNING **: Using synclient
ERROR: openbox-xdg-autostart requires PyXDG to be installed
============================================================================
Cairo-Dock version: 2.3.0~2
Compiled date: May 9 2011 21:48:33
Running with OpenGL: 0
============================================================================
tint2 : pixmap background detection failed
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:167) [0m
while opening module '/usr/lib/cairo-dock/libcd-weblets.so' : (libwebkitgtk-1.0.so.0: cannot open shared object file: No such file or directory)
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-applications-manager.c:get_config:1485) [0m
Sorry but either your X server does not have the XComposite extension, or your version of Cairo-Dock was not built with the support of XComposite.
You can't have window thumbnails in the dock
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:699) [0m
while listing user packages in '/home/archone/.config/cairo-dock/third-party' : Error opening directory '/home/archone/.config/cairo-dock/third-party': No such file or directory
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_get_url_data_with_post:327) [0m
an error occured while downloading 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0/list.conf' : Couldn't resolve host name
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_net_packages:646) [0m
empty packages list on http://download.tuxfamily.org/glxdock/themes (check that your connection is alive, or retry later)
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:710) [0m
while listing distant packages in 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0' : empty packages list on http://download.tuxfamily.org/glxdock/themes
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 776
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 777
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 778
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 1973
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 1974
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 1975
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 7574
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 7575
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 7576
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 9114
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 9115
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 9116
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 17878
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 17879
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 17880
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 23238
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 23239
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 23240
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 84117
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 84118
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 84119
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 86307
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 86308
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 86309
Months ago I have had problem with my SD card and did what it was said in this topic https://bbs.archlinux.org/viewtopic.php?id=115386. I don't know if it makes any difference, but it is worth saying. The problem from that topic still exists, when I put my /home into fstab, I am still getting error, that's why I have my mount in rc.local.

Hi,
I am having problem with modules loading. I haven't updated my netbook for a month or so (my motherboard was broken and it took me that long to finally repair it). After updating, which took ages and the installation size was about 2,2 GBs I have come across two problems.
First one is modules loading being failed. On boot, everything is said to be DONE in green but with modules I get red FAIL. I am not an advanced user, so I don't really know what to paste, so I'll paste errors.log
Oct 20 20:18:26 localhost kernel: [ 0.217828] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
Oct 20 20:18:26 localhost kernel: [ 0.217907] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
Oct 20 20:18:36 localhost kernel: [ 18.740305] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
Oct 20 20:18:36 localhost kernel: [ 18.740321] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
Oct 20 20:18:36 localhost kernel: [ 18.849318] pciehp 0000:00:1c.2:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
Oct 20 20:18:36 localhost kernel: [ 18.849332] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:03:00
Oct 20 20:18:36 localhost kernel: [ 18.956303] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
Oct 20 20:18:36 localhost kernel: [ 18.956318] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00
Oct 20 20:18:37 localhost dhcpcd[3196]: dhcpcd not running
Oct 20 20:18:38 localhost dhcpcd[3202]: dhcpcd not running
Oct 20 20:18:38 localhost dhcpcd[3209]: dhcpcd not running
Another problem is with SLiM, or at least logging. I have my /home partition on my SD card. From time to time when I turn my computer on, I am being logged as root, not as my user. When I logout and login again, everything is fine. My slim.log
/usr/bin/xauth: file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH i686
Current Operating System: Linux archone 2.6.34-netbook #3 SMP Sat Jul 17 19:18:04 UTC 2010 i686
Kernel command line: root=/dev/sda1 ro rootfstype=ext4 checkdisk quiet
Build Date: 17 September 2011 07:40:13AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 20:18:25 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
/usr/bin/xauth: file /home/archone/.Xauthority does not exist
which: no hsetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
which: no esetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-X-utilities.c:cairo_dock_support_X_extension:581) [0m
The dock was not compiled with the X extensions (XComposite, xinerama, xtst, XDamage, etc).
** (gsynaptics-init:3145): WARNING **: Using synclient
ERROR: openbox-xdg-autostart requires PyXDG to be installed
============================================================================
Cairo-Dock version: 2.3.0~2
Compiled date: May 9 2011 21:48:33
Running with OpenGL: 0
============================================================================
tint2 : pixmap background detection failed
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:167) [0m
while opening module '/usr/lib/cairo-dock/libcd-weblets.so' : (libwebkitgtk-1.0.so.0: cannot open shared object file: No such file or directory)
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-applications-manager.c:get_config:1485) [0m
Sorry but either your X server does not have the XComposite extension, or your version of Cairo-Dock was not built with the support of XComposite.
You can't have window thumbnails in the dock
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:699) [0m
while listing user packages in '/home/archone/.config/cairo-dock/third-party' : Error opening directory '/home/archone/.config/cairo-dock/third-party': No such file or directory
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_get_url_data_with_post:327) [0m
an error occured while downloading 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0/list.conf' : Couldn't resolve host name
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_net_packages:646) [0m
empty packages list on http://download.tuxfamily.org/glxdock/themes (check that your connection is alive, or retry later)
[1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:710) [0m
while listing distant packages in 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0' : empty packages list on http://download.tuxfamily.org/glxdock/themes
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 776
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 777
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 778
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 1973
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 1974
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 1975
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 7574
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 7575
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 7576
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 9114
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 9115
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 9116
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 17878
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 17879
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 17880
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 23238
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 23239
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 23240
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 84117
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 84118
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 84119
error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 86307
error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 86308
error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 86309
Months ago I have had problem with my SD card and did what it was said in this topic https://bbs.archlinux.org/viewtopic.php?id=115386. I don't know if it makes any difference, but it is worth saying. The problem from that topic still exists, when I put my /home into fstab, I am still getting error, that's why I have my mount in rc.local.

[SOLVED]Acer Aspire V5-571 backlight problem

Hi,
I have Acer Aspire V5-571 laptop with intel HD 4000 graphics.I used to control backlight with intel driver,but after reinstalling arch there is no intel_backlight0 folder in /sys/class/backlight directory, only acpi_video0 folder.I have the lastest intel driver 2.21.2-1 and kernel version 3.7.7-1.
Thanks.
Last edited by grobar87 (2013-05-14 19:49:39)

Fixed in kernel 3.9.2-1

Acer Aspire 5750 Problems in Error.log

Similar Messages

Maybe you are looking for