Acer aspire E 15 - Blank screen

Hi,
I have an Acer Aspire E 15 running Windows 8.1. The problem is when it starts up all I get is a Blank/black screen. No BIOS screen, if i look closely I can see the screen flicking. The machine does statup but I never get anything on the screen. I've tried removing the battery?
Any ideas folks?

johnd1881,
If you connect an external monitor and still get no display I would suggest contacting the Acer technical support in your area for options.

Similar Messages

  • Acer Aspire One A0A 150: screen flicker, blanking (intel driver?)

    Being the stubborn sort, I've been struggling for more than a month with the following problem, to no avail.
    The screen on my Acer flickers while running X (seems to be independent of window manager I run.) Even worse, at random intervals, the screen will actually go completely black (or sometimes green or blue, but usually black.)
    To be clear, I am not absolutely sure the flickering and screen blanking are related to each other... only 90% certain.
    The flickering and blanking seem completely unrelated to what I'm doing on the computer. The blanking will happen if I'm watching a movie, or even if I'm simply typing an email (in fact, it has happened as I typed this post!) When the screen blanks out, the only way to recover it is to shut the lid of the laptop, wait a couple of seconds, and open it again. Closing the laptop lid suspends the laptop and the screen seems to recover when the computer wakes up. Nothing else seems to bring the screen back: not console switching, not killing X, nor any magic key combination. Before I figured out that suspend/resume would bring back the screen, I had to reboot it with SysRq-B.
    Although the flicker/blanking happens frequently, it leaves no traces I can find in either dmesg or Xorg log. I do not use an xorg.conf file.
    One MIGHT think it is a hardware issue, but it NEVER occurs when I boot into Windows XP. I have used XP for days without any flicker or blanking (hence one reason I think the two issues are related.) Also, I'm pretty sure it doesn't occur when I boot the computer into xPUD.
    Some research led me to think my issue might be with the intel driver. With that in mind, I've tried different versions of the driver:
    xf86-video-intel from both extra and testing.
    xf86-video-intel-git from AUR
    xf86-video-intel-newest from AUR.
    (In each case, with the appropriate dependencies, etc.)
    Presently, I'm using the driver from testing, but none of the drivers has made any noticeable difference: the problem remains.
    Finally, I am using Tera's one-dev kernel for the Acer Aspire One, available in AUR.
    Does anyone have any idea how to fix this issue? It's driving me to rely on Windows XP a lot more often, as suspending/resuming the laptop when it blanks out really interrupts my work. Please save me from Windows :-)
    Last edited by tw (2009-12-29 09:48:09)

    damjan wrote:UVESAFB and KMS will probably never work together. Just use KMS it's way better (and you should be able to run same splash on KMS too)
    Thanks. Means I yet again learned something about linux the trial and error way.
    I actually used a setup where KMS was disabled and UVESAFB enabled, since the Arch Wiki entry on Splashy strongly recommended UVESAFB and didn't mention KMS. Oh well. KMS enabled now, the UVESAFB daemon thrown out. I should probably get a wiki account, suggest a clarification of that entry to prevent other newbies from making the same mistake.
    EDIT: Added a section on KMS to the Arch Wiki entry on Splashy
    Last edited by caligo (2010-01-11 12:49:01)

  • Acer aspire, one logged in screen goes fuzzy what's wrong how do you fix it

    ONCE I log in my screen goes all fuzzy. Like old VCR tapes used to do how do younfix it?

    Hello, Do you have the same issue with an external monitor or a LCD TV in using the VGA or HDMI port?

  • Acer Aspire V5-571 will not power on

    Apologies - just posted this question in Welcome Forum by mistake.Computer will not power on, was working perfectly last night when I shut down. Have tried all suggestions in Knowledge Base with no success. Any help very much appreciated. Thanks in advance.

    I have had this problem twice now. My system is working just fine. I power it down and take it to work or home. I get to my destination and plug in my system and i get NO lights of any kind. It will not power up at all. I get NOTHING. My laptop is all of a month old. I pull out my screwdriver and take off the bottom cover. I check connections etc. Everthing is tight and clean. BUT note that I have touched several metal components. Did I just ground out any stray charges? I don't know. But Now after doing nothing more then looking and touching I put the case back together. Turn if over and plug everythign back in again and NOW it powers up.  The second time same thing only this time it gets to the Acer screen and nothing. I power off/on and try again. Acer screen. After 2 cycles of this I swap out the power block (19V @ 3.42A acer just like the original). After 2 more cycles I swap back to the original. I try #5 and i'm getting ready to power off again when I get the floting balls wait sign and I wait.... now up until now boot up on windows 8 has always been less then a minute. This time its taken like 6 minutes to boot up. NOTE It updated to 8.1 last thursday (I HATE auto updating! it is now turned off!). So any ideas here? is this a static buildup issue? Is this a design issue? Power board or plug issue? What is the problem here Acer. I LOVE my 1st acer aspire 5210z until the screen died. So I buy the awesome new one and   ACER HELP!!!!

  • Acer Aspire E3-112 Mouse Cursor Gets Stuck on Screen - Touchpad Unresponsive

    Hi guys. I just bought a Windows 8.1 Acer Aspire E3-112-C6YY from Officeworks a week ago. It was the last one left in any store near me. It's been great so far but just last night when I unplugged my USB mouse, I noticed the touchpad stopped responding and the mouse cursor wouldn't move. My partner pressed Fn + F7 then pressed it again and it started working again and was fine until earlier today. The mouse/touchpad randomly 'gets stuck' and even completely stops working and I have to 'turn it on and off again' with those function keys. Sometimes it doesn't work immediately and is still stuck for a couple of seconds. This is happening every 5 minutes or so now. I'm worried it will stop working all together. The USB mouse doesn't do this so I think it's more of the touchpad itself not responding more than anything else. I'm not sure if this is a software issue as the laptop is brand new and everything should be up to date (I've been installing every new Windows Update that comes along) or if it's a hardware issue - I have Acer 1 year warranty but not sure if there's a simple fix for this rather than getting it sent off as my uni semester starts next week and I need it. I've been treating it gently, I don't leave it on all the time, I haven't dropped it or modified it in any way and I can't really take it back as this was the last model and I really like this laptop. Please help. Thanks

    In this case, you are advised to reinstall touchpad drivers and check if that work. To do this, follow the steps below:
    1. Go to http://us.acer.com/ac/en/US/content/drivers
    2. Type Aspire E3-112 in the box below "Search by Product Model" and click "Search".
    3. Once your product details are displayed on the screen, click "Driver" tab and download the latest touchpad drivers for your model. If you are not aware of which type of touchpad drivers (ELANTECH or Synaptics) you need to install, you are advised to refer to the computer's user manual for details.
    4. Follow on-screen instructions. If the issue still persists, you are advised to take it back to the seller or contact your nearest Acer service center through the following link for further assistance:
    http://us.acer.com/ac/en/US/content/service-contact Hope this will help you.

  • ACER ASPIRE SWITCH 10 SHUTS DOWN and WONT TURN ON

    I got my Acer Aspire Switch 10 just 2weeks ago. Everything seems fine until yesterday.
    I was using the unit, charger plugged in (blue indicator light present), then it just shut down. I tried restarting it and it wont open. The monitor was becoming warm.
    Now, I plugged it in (orange indicator light present), it is just a blank screen. I tried pressing the power button for about 30 seconds then press the power and volume down button (I read it somewhere), but the monitor just blinked black and gray many time.
    Can someone help me with this please. Desperate here. Thank you!!

    Sorry to hear that you have issues with new windows tablet,If you are using Aspire SW5-01, you will find a reset pinhole between Microphone and MicroSD card slot.  Insert a paperclip into the hole and press for four seconds to reset the tablet If the power indicator is blue steady then the computer is fully charged and plugged in.Amber Steady, then the computer is charging and plugged in.If Amber Blinking, then the battery is critically low or abnormal batteryIf the indicator is Off, the computer is off.

  • [Solved] Suspend to ram doesn't work correctly on Acer Aspire 5100

    Hi people of the archlinux forum.
    Finally I decided to change from ubuntu to archlinux because I wanted to learn more about the world of linux.:D
    I have already almost completely set up my laptop, but I have a problem when suspending to ram. The problem comes out when i wake up the laptop, and the screen starts to flicker and will not go away until i restart the laptop.
    This is my laptop after the suspend:
    I'm using pm-utils to suspend and hibernate my laptop, and the hibernate works fine. All settings were made following the arch wiki.
    this is my xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "dbe"
    Load "dri2"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    Identifier "Monitor0"
    VendorName "AUO"
    ModelName "2174"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "CPPIOMode" # [<bool>]
    #Option "CPusecTimeout" # <i>
    #Option "AGPMode" # <i>
    #Option "AGPFastWrite" # [<bool>]
    #Option "AGPSize" # <i>
    #Option "GARTSize" # <i>
    #Option "RingSize" # <i>
    #Option "BufferSize" # <i>
    #Option "EnableDepthMoves" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "NoBackBuffer" # [<bool>]
    #Option "DMAForXv" # [<bool>]
    #Option "FBTexPercent" # <i>
    #Option "DepthBits" # <i>
    #Option "PCIAPERSize" # <i>
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "CustomEDID" # [<str>]
    #Option "DisplayPriority" # [<str>]
    #Option "PanelSize" # [<str>]
    #Option "ForceMinDotClock" # <freq>
    #Option "ColorTiling" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "RageTheatreCrystal" # <i>
    #Option "RageTheatreTunerPort" # <i>
    #Option "RageTheatreCompositePort" # <i>
    #Option "RageTheatreSVideoPort" # <i>
    #Option "TunerType" # <i>
    #Option "RageTheatreMicrocPath" # <str>
    #Option "RageTheatreMicrocType" # <str>
    #Option "ScalerWidth" # <i>
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "ShowCache" # [<bool>]
    #Option "ClockGating" # [<bool>]
    #Option "VGAAccess" # [<bool>]
    #Option "ReverseDDC" # [<bool>]
    #Option "LVDSProbePLL" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "ConnectorTable" # <str>
    #Option "DefaultConnectorTable" # [<bool>]
    #Option "DefaultTMDSPLL" # [<bool>]
    #Option "TVDACLoadDetect" # [<bool>]
    #Option "ForceTVOut" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "IgnoreLidStatus" # [<bool>]
    #Option "DefaultTVDACAdj" # [<bool>]
    #Option "Int10" # [<bool>]
    #Option "EXAVSync" # [<bool>]
    #Option "ATOMTVOut" # [<bool>]
    #Option "R4xxATOM" # [<bool>]
    #Option "ForceLowPowerMode" # [<bool>]
    #Option "DynamicPM" # [<bool>]
    #Option "NewPLL" # [<bool>]
    #Option "ZaphodHeads" # <str>
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "RS482 [Radeon Xpress 200M]"
    BusID "PCI:1:5:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    I know you maybe need more info, but i don't really know what do you need... please tell me what do you need and a post it!
    Sorry for my english this isn't my native languaje... Thanks you for all
    Last edited by geonunez (2010-07-08 20:19:09)

    I have the same problem with my Acer Aspire 5100 (video ATI Xpress1100).
    xorg.conf is not used. Turning KMS off doesn`t help.
    I have tried to use uswsusp, but it doesn`t help. s2ram -n output correctly identify my laptop, which means it is in "whitelist" and correct settings for this hardware is known. s2ram suspend works, but screen blinking after waking up remains the same.
    [Sydorenko@SLE ~]$ sudo s2ram -n
    Machine matched entry 17:
    sys_vendor = 'Acer *'
    sys_product = 'Aspire 5100 *'
    sys_version = ''
    bios_version = ''
    Fixes: 0x3 S3_BIOS S3_MODE
    This machine can be identified by:
    sys_vendor = "Acer "
    sys_product = "Aspire 5100 "
    sys_version = "V3.10A"
    bios_version = "V3.10A"
    See http://suspend.sf.net/s2ram-support.html for details.
    Last edited by SydMax (2010-06-06 16:53:50)

  • Blank screen after poweroff

    First of all, sorry for my language. I'm french (I've posted my problem on the french forum here but it hasn't been solved yet.
    THE PROBLEM :
    When I shutdown my desktop computer using any command ('shutdown -h now' 'halt' of using the syslinux poweroff, and even when I try to suspend with 'pm-suspend'), I have a blank screen when I try to turn the PC on. And then the screen says "no signal". Even the BIOS doesn't appear.
    I have to use the RESET button of my tower to see the BIOS appear
    First I didn't have the problem with the command 'reboot', but it's the same now (since I changed my CMOS battery).
    And since that I have also to RESET several times to get the BIOS.
    MY CONFIG :
    - kernel : 3.14.2-1-ARCH
    - openbox + slim
    - bootloader syslinux
    - graphic card : NVIDIA GeForce 8600 GTS + current Nvidia driver (my card is not recognized by 'nouveau')
    - motherboard : ASUSTeK P5PL2-E
    - BIOS version : 0904 (up to date stable version)
    - CPU: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
    - Screen : ACER G246HL (DVI connected)
    WHAT I'VE TRIED SO FAR :
    - unplug the computer, wait, plug it.
    - reinstall the packages : nvidia nvidia-utils nvidia-libgl xorg-server xorg-xinit xorg-server-utils
    - boot on the arch's liveUSB and shutdown from there >> same problem
    - boot with the kernel options 'noacpi noapic nolapic'
    - desactivate the QuickBoot option on the BIOS (it seemed to work but finally not)
    - use the LTS kernel
    - open the computer and clean everything inside, check that everything is OK, even change the CMOS battery
    - run memetest86+ >> no error
    - check the CPU temperature
    WHAT I FOUND (quite similar):
    http://support.asus.com/faq/detail.aspx … 732A11F1E2
    Please help :'(
    Last edited by cazuza (2014-05-04 16:12:43)

    I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

  • [SOLVED] Blank screen starting new Xorg (ATI)

    Yes, it's another blank screen problem with xorg.  Sorry. 
    After months of sticking with an older Xorg (due to problems with my ATI Radeon X1550 card and the new Xorg w/ dual head), I decided to make a jump and update to the latest Xorg and ati drivers, foregoing dual screens.  I've read you can just start Xorg without a config, which I tried, but no luck.  I just get a blank screen.  I autogenerated a config file and still get a blank screen.  Either way there's no default X cursor or xterm anywhere. 
    I've tried adding the AllowEmptyInput flag as suggested in related threads, but that doesn't help.  My .conf file and log file are listed below.  If someone could give me some suggestions to solve this, I'd appreciate it.;
    My xorg.conf.new file:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
    Option "DontZap" "false"
    Option "AllowEmptyInput" "off"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    # Load "glx"
    Load "extmod"
    Load "record"
    Load "dri2"
    Load "dbe"
    Load "dri"
    Load "drm"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 380 300 # mm
    Identifier "Monitor0"
    VendorName "ACR"
    ModelName "AL1916"
    HorizSync 31.0 - 81.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "CPPIOMode" # [<bool>]
    #Option "CPusecTimeout" # <i>
    #Option "AGPMode" # <i>
    #Option "AGPFastWrite" # [<bool>]
    #Option "AGPSize" # <i>
    #Option "GARTSize" # <i>
    #Option "RingSize" # <i>
    #Option "BufferSize" # <i>
    #Option "EnableDepthMoves" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "NoBackBuffer" # [<bool>]
    #Option "DMAForXv" # [<bool>]
    #Option "FBTexPercent" # <i>
    #Option "DepthBits" # <i>
    #Option "PCIAPERSize" # <i>
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "DisplayPriority" # [<str>]
    #Option "PanelSize" # [<str>]
    #Option "ForceMinDotClock" # <freq>
    #Option "ColorTiling" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "RageTheatreCrystal" # <i>
    #Option "RageTheatreTunerPort" # <i>
    #Option "RageTheatreCompositePort" # <i>
    #Option "RageTheatreSVideoPort" # <i>
    #Option "TunerType" # <i>
    #Option "RageTheatreMicrocPath" # <str>
    #Option "RageTheatreMicrocType" # <str>
    #Option "ScalerWidth" # <i>
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "ShowCache" # [<bool>]
    #Option "DynamicClocks" # [<bool>]
    #Option "VGAAccess" # [<bool>]
    #Option "ReverseDDC" # [<bool>]
    #Option "LVDSProbePLL" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "ConnectorTable" # <str>
    #Option "DefaultConnectorTable" # [<bool>]
    #Option "DefaultTMDSPLL" # [<bool>]
    #Option "TVDACLoadDetect" # [<bool>]
    #Option "ForceTVOut" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "IgnoreLidStatus" # [<bool>]
    #Option "DefaultTVDACAdj" # [<bool>]
    #Option "Int10" # [<bool>]
    #Option "EXAVSync" # [<bool>]
    #Option "ATOMTVOut" # [<bool>]
    #Option "R4xxATOM" # [<bool>]
    Identifier "Card0"
    Driver "ati"
    VendorName "ATI Technologies Inc"
    BoardName "RV505 [Radeon X1550 Series]"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    My Xorg.0.log:
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
    Build Date: 18 July 2009 08:27:13PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 18:18:46 2009
    (++) Using config file: "./xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "DontZap" "false"
    (**) Option "AllowEmptyInput" "off"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x7a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD Graphics, ATI Radeon Graphics,
    ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
    ATI Radeon Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000f5000000
    (II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
    (WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
    IOBaseAddress: 0xb000
    Filename: SV25429.bin
    BIOS Bootup Message:
    7143.9.13.1.29.AS01
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 550000
    (II) RADEON(0): Default Memory Clock: 400000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1600
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
    (II) RADEON(0): Skipping TV-Out
    (II) RADEON(0): Skipping Component Video
    encoder: 0x15
    encoder: 0x13
    encoder: 0x16
    (II) RADEON(0): Output VGA-0 using monitor section Monitor0
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_KLDSCP_DAC1
    DDC reg: 0x7e40
    (II) RADEON(0): Port1:
    XRANDR name: DVI-0
    Connector: DVI-I
    CRT2: INTERNAL_KLDSCP_DAC2
    DFP1: INTERNAL_KLDSCP_TMDS1
    DDC reg: 0x7e50
    (II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    finished output detect: 1
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    (II) RADEON(0): Output VGA-0 connected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output VGA-0 using initial mode 1280x1024
    after xf86InitialConfiguration
    (**) RADEON(0): Display dimensions: (380, 300) mm
    (**) RADEON(0): DPI set to (85, 108)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x10000000
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
    (II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
    (II) RADEON(0): Largest offscreen area available: 1280 x 6909
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x1b80000
    (II) RADEON(0): Will use depth buffer at offset 0x21c0000
    (II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
    (II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93c5000
    (II) RADEON(0): [pci] ring handle = 0xf93c5000
    (II) RADEON(0): [pci] Ring mapped at 0xa765d000
    (II) RADEON(0): [pci] Ring contents 0x00000000
    (II) RADEON(0): [pci] ring read ptr handle = 0xf94c6000
    (II) RADEON(0): [pci] Ring read ptr mapped at 0xb792c000
    (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
    (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94c7000
    (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa745d000
    (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
    (II) RADEON(0): [pci] GART texture map handle = 0xf96c7000
    (II) RADEON(0): [pci] GART Texture map mapped at 0xa57dd000
    (II) RADEON(0): [drm] register handle = 0x2ea00000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (**) Option "dpms"
    (**) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
    (II) RADEON(0): Largest offscreen area available: 1280 x 6901
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output CRT1 disable success
    Mode 1280x1024 - 1688 1066 5
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    freq: 108000000
    best_freq: 108000000
    best_feedback_div: 48
    best_ref_div: 2
    best_post_div: 6
    (II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
    (II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output DAC1 setup success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 enable success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 376 x 301
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
    (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
    (**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
    (II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
    (II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
    (II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
    (II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
    (**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
    (**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) AIGLX: Suspending AIGLX clients for VT switch
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): avivo_restore !
    Enable CRTC 0 success
    Unblank CRTC 0 success
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) ImExPS/2 Logitech Explorer Mouse: Close
    (II) UnloadModule: "evdev"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "kbd"
    (II) UnloadModule: "mouse"
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb792d000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by edenxavier (2009-07-28 22:33:44)

    Did like you said, however it didn't work.  It complained this time about not having the fbdev available.  It's not installed because I didn't think it was related.  Here's the new Xorg.log.0 file:
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
    Build Date: 18 July 2009 08:27:13PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 23:20:52 2009
    (II) Loader magic: 0x7a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default ati Device 0"
    Driver "ati"
    EndSection
    Section "Screen"
    Identifier "Builtin Default ati Screen 0"
    Device "Builtin Default ati Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default ati Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default ati Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default ati Device 0"
    (==) No monitor specified for screen "Builtin Default ati Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD Graphics, ATI Radeon Graphics,
    ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
    ATI Radeon Graphics
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (WW) Falling back to old probe method for vesa
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000f5000000
    (II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Builtin Default ati Screen 0" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
    (WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
    IOBaseAddress: 0xb000
    Filename: SV25429.bin
    BIOS Bootup Message:
    7143.9.13.1.29.AS01
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 550000
    (II) RADEON(0): Default Memory Clock: 400000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1600
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
    (II) RADEON(0): Skipping TV-Out
    (II) RADEON(0): Skipping Component Video
    encoder: 0x15
    encoder: 0x13
    encoder: 0x16
    (II) RADEON(0): Output VGA-0 has no monitor section
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_KLDSCP_DAC1
    DDC reg: 0x7e40
    (II) RADEON(0): Port1:
    XRANDR name: DVI-0
    Connector: DVI-I
    CRT2: INTERNAL_KLDSCP_DAC2
    DFP1: INTERNAL_KLDSCP_TMDS1
    DDC reg: 0x7e50
    (II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using EDID range info for horizontal sync
    (II) RADEON(0): Using EDID range info for vertical refresh
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    finished output detect: 1
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    (II) RADEON(0): Output VGA-0 connected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output VGA-0 using initial mode 1280x1024
    after xf86InitialConfiguration
    (**) RADEON(0): Display dimensions: (380, 300) mm
    (**) RADEON(0): DPI set to (85, 108)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x10000000
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
    (II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
    (II) RADEON(0): Largest offscreen area available: 1280 x 6909
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x1b80000
    (II) RADEON(0): Will use depth buffer at offset 0x21c0000
    (II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
    (II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93e3000
    (II) RADEON(0): [pci] ring handle = 0xf93e3000
    (II) RADEON(0): [pci] Ring mapped at 0xb77ac000
    (II) RADEON(0): [pci] Ring contents 0x00000000
    (II) RADEON(0): [pci] ring read ptr handle = 0xf94e4000
    (II) RADEON(0): [pci] Ring read ptr mapped at 0xb799f000
    (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
    (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94e5000
    (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa74dc000
    (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
    (II) RADEON(0): [pci] GART texture map handle = 0xf96e5000
    (II) RADEON(0): [pci] GART Texture map mapped at 0xa585c000
    (II) RADEON(0): [drm] register handle = 0x2ea00000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
    (II) RADEON(0): Largest offscreen area available: 1280 x 6901
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output CRT1 disable success
    Mode 1280x1024 - 1688 1066 5
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    freq: 108000000
    best_freq: 108000000
    best_feedback_div: 48
    best_ref_div: 2
    best_post_div: 6
    (II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
    (II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output DAC1 setup success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 enable success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 376 x 301
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
    (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
    (**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
    (II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
    (II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
    (II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
    (II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
    (**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
    (**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) ImExPS/2 Logitech Explorer Mouse: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): avivo_restore !
    Enable CRTC 0 success
    Unblank CRTC 0 success
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb79a0000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by edenxavier (2009-07-28 03:31:10)

  • [HOWTO] Installing Arch Linux stable release on Acer Aspire One 522

    [This is a work on progress and my first howto ever]
    These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
    As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
    This Howto borns with the intention to address this problem.
    You need to be familiarized with Linux internals to follow this howto.
    (Expect this howto to become useless with new stable releases of ArchLinux.)
    Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
    I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
    Just boot with systemrescuecd
    Mount your external harddisk on /mnt/floppy for example
    Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
    This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
    Result image was about 22GB size
    This image will restore partition table, boot sector and all data if things go wrong.
    I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
    If you have some Gentoo Linux experience you will find those steps really familiar.
    You will need 2 USB pendrives or similar storage options.
    One is needed to boot into your netbook, and the other to store our custom archlinux build.
    Making an updated ArchLinux system
    1) Make a local dir on your existing linux system
    # mkdir ./newarch
    2) Install pacman database on it
    # pacman -Sy -r ./newarch
    3) Install base system
    # pacman -S base -r ./newarch
    4) Let's chroot inside
    # cp /etc/resolv.conf ./newarch/etc/
    # cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
    # mount -t proc proc ./newarch/proc
    # mount -t sysfs sys ./newarch/sys
    # mount -o bind /dev ./newarch/dev
    # chroot ./newarch /bin/bash
    5) Edit configuration files
    # nano -w /etc/rc.conf
    # nano -w /etc/hosts
    # nano -w /etc/mkinitcpio.conf
    Forget /etc/fstab for now since you don't know what partitions to use yet
    6) Generate kernel image
    # mkinitcpio -p kernel26
    7) Generate locales
    # nano -w /etc/locale.gen
    # locale-gen
    8) Make a tarball with our custom ArchLinux
    # exit
    # umount ./newarch/proc
    # umount ./newarch/dev
    # umount ./newarch/sys
    # tar -cvpf newarch.tar ./newarch
    9) Copy this tarball to an USB pendrive or external harddisk
    10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
    You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
    To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
    Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
    You should be booting into SystemRescueCD without any problem.
    After initialization you will end in a root prompt.
    11) Let's partition the disk
    You will find 3 partitions if this is your first time:
    /dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
    /dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
    /dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
    My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
    You have plenty of space with sda3, about 230G.
    So run fdisk/cfdisk and delete /dev/sda3
    Now create a 100M partition for boot
    Now create a Extended partition with all the space left
    Now create a 1GB logical partition for swap
    Now create a 10-15 GB  logical partition for root system
    And finally a logical partition for our home partition with all space left
    Your partition table should look like this:
    /dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
    /dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
    /dev/sda3 29566976 29771775 102400 83 Linux
    /dev/sda4 29771776 488397167 229312696 5 Extended
    /dev/sda5 29773824 31821823 1024000 83 Linux
    /dev/sda6 31823872 63281151 15728640 83 Linux
    /dev/sda7 63283200 488397167 212556984 83 Linux
    12) Create filesystems
    I choosed ext2 for boot, and reiserfs for root and home partitions.
    # mke2fs /dev/sda3
    # mkreiserfs /dev/sda6
    # mkreiserfs /dev/sda7
    # mkswap /dev/sda5
    13) Mount partitions
    # mkdir arch
    # mount /dev/sda6 arch
    # mkdir arch/boot
    # mount /dev/sda3 arch/boot
    # mkdir arch/home
    # mount /dev/sda7 arch/home
    14) Copy our custom ArchLinux build on it
    # mount /dev/sdb1 /mnt/floppy (for example)
    # cd arch
    # tar -xvpf /mnt/flopy/newarch.tar
    15) Configure /etc/fstab
    Mine is as follows:
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    /dev/sda3 /boot ext2 defaults 0 1
    /dev/sda6 / reiserfs defaults 0 1
    /dev/sda7 /home reiserfs defaults 0 1
    /dev/sda5 swap swap defaults 0 0
    16) Chroot in your new system
    # mount -t proc proc ./proc
    # mount -t sysfs sys ./sys
    # mount -o bind /dev ./dev
    # chroot ./ /bin/bash
    17) Install grub
    # grub-install
    Edit /boot/grub/menu.lst to suit your needs
    Mine looks like this:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    title Arch Linux
    root (hd0,2)
    kernel /vmlinuz26 root=/dev/sda6 ro
    initrd /kernel26.img
    title Arch Linux Fallback
    root (hd0,2)
    kernel /vmlinuz26 root=/dev/sda6 ro
    initrd /kernel26-fallback.img
    title Windows 7 Recovery
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    As you see, you can restore Windows 7 Starter from Grub.
    18) Change root password
    # passwd
    19) Add a regular  user account
    # useradd -G video,audio,users -m username
    # passwd username
    20) You're done!
    # exit
    # cd ..
    # umount ./arch/proc
    # umount ./arch/dev
    # umount ./arch/sys
    # umount ./arch/boot
    # umount ./arch/
    # reboot
    Remove the usb stick from your netbook.
    If all went ok, you will be inside your new stable and updated ArchLinux system
    Next post is reserved for software configurations specific to the Acer Aspire One 522
    Last edited by tigrezno (2011-04-20 12:22:38)

    Using acpid to achieve the following:
    - Change screen brightness when operating in battery mode
    - Power off when the power button is pressed
    - Suspend when the lid is down
    - Reduce CPU frequency speed to maximize battery usage
    Remember that system suspend is only supported by ati free driver xf86-video-ati
    1) Install acpid daemon and cpufrequtils
    # pacman -S apcid cpufrequtils
    2) edit acpid handler script
    # nano -w /etc/acpi/handler.sh
    Change the following section:
    ac_adapter)
    case "$2" in
    AC)
    case "$4" in
    00000000)
    echo -n $minspeed >$setspeed
    #/etc/laptop-mode/laptop-mode start
    00000001)
    echo -n $maxspeed >$setspeed
    #/etc/laptop-mode/laptop-mode stop
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    for:
    ac_adapter)
    case "$2" in
    ACAD)
    case "$4" in
    00000000)
    echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
    cpufreq-set -c 0 -f 800Mhz
    cpufreq-set -c 1 -f 800Mhz
    00000001)
    echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
    cpufreq-set -c 0 -f 1000Mhz
    cpufreq-set -c 1 -f 1000Mhz
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    Make sure you changed AC) for ACAD)
    Now change this other section:
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF) logger "PowerButton pressed: $2" ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    with:
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF) poweroff ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    Change:
    button/lid)
    #echo "LID switched!">/dev/tty5
    logger "ACPI group/action undefined: $1 / $2"
    for:
    button/lid)
    pm-suspend && /etc/rc.d/network restart
    logger "ACPI group/action undefined: $1 / $2"
    Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
    3) Start acpid and load modules
    # modprobe powernow-k8
    # /etc/rc.d/acpid start
    Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
    Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
    Stopping system freezes due to ethernet driver
    The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
    To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
    MODULES=(!ath9k !atl1c)
    Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
    Correctly starting wireless at boot
    I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
    To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
    wi_up()
    eval iwcfg="\$wlan_${1}"
    [[ ! $iwcfg ]] && return 0
    /usr/sbin/iwconfig $iwcfg
    [[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
    sleep $WIRELESS_TIMEOUT
    /usr/sbin/iwconfig $iwcfg
    bssid=$(iwgetid $1 -ra)
    It will do the trick and will start at boot correctly. This is not a solution but a fix.
    Adjust Touchpad to disable false taps
    What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
    This means you can write and press space without having the cursor click out of the window and such.
    # synclient AreaLeftEdge=150
    # synclient AreaRightEdge=1300
    # synclient AreaTopEdge=300
    Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    Option "AreaTopEdge" "300"
    Option "AreaLeftEdge" "150"
    Option "AreaRightEdge" "1300"
    EndSection
    You can play with those values. They just work for me.
    Last edited by tigrezno (2011-04-23 13:49:48)

  • ACER ASPIRE ES1-511-C83X WINDOWS 7 INSTALLATION

    For the last couple of days I've been trying to install Windows 7 64-bit on my new ACER Aspire E15 [es1-511-c83x] that came with Windows 8.1  preinstalled. It  supports UEFI and LEGACY boot options settings in BIOS utility.   When I try to boot it from the Win 7 DVD it’s hanging on “Starting Windows”  logo screen after the files are loaded and the system is halted.I tried to run it in “Safe mode with Command prompt” and it stops at:
    Loading Windows Files:
    Loaded: ...\system32\drivers\disk.sys
    When I start the installation from Win 8.1 interface and choose disk partition that was created with Win 8.1 I’m getting this message:
    “The partitions on the disk selected for installation are not in recommended order. For additional information about installing to GPT disks go to the Microsoft website and search for GPT. Do you want to proceed with installation?”
    If I go ahead it’s hanging again on “Loaded: ...\system32\drivers\disk.sys” after the system is rebooted.
    I want to install windows 7 along with my Win8.1 with UEFI and GPT. I thing from windows 7, these configuration will work.
    Do I have any other options?

    http://www.sevenforums.com/installation-setup/360135-win-7-install-uefi-gpt.html#post2997467

  • How to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

    how to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q. 

    Welcome to Apple Support Communities
    Your MacBook Pro is not designed to install Windows through an USB drive, so do not use this option. You are getting a white screen because your MacBook cannot start up from the USB drive with Windows.
    Instead, use a DVD with Windows, so you will be able to install Windows. Follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    Mid 2009 MacBooks Pro do not support Windows 8 officially

  • Acer Aspire one will not boot up

    When I boot up my Acer Aspire one  I get a message that says:
    Windows failed to start.  A recent hardware or software change might be the cause.  To fix the problem:
    1. Insert your Windows installation disc and restart your computer.
    2. Choose your language settings, and then click "next"
    3.  Click "Repair your computer"
    If you do not have this disc. contact your system administrator or computer manufacturer for assistance.
    File:  \Boot\BCD
    Status:  0xc000000e
    Info:  An error occurred while attempting to read the boot configuration data.
    The only problem is that my net book has no disc drive.  What am I to do??

    From ABOUT:
    Start
    System Recovery Options.
    There are several ways of starting System Recovery Options. See How To Access the System Recovery Options Menu in the link above for help.
    Open Command Prompt from the System Recovery Options menu.
    Note: The
    Command Prompt available from the System Recovery Options menu is very similar to the one you may be familiar with within Windows. Also, the following procedure should work as described in both Windows 7 and Windows Vista.
    At the prompt, type the bootrec
    command as shown below and then press Enter:
    bootrec /rebuildbcd
    The bootrec command will search for Windows installations not included in the Boot Configuration Data and then ask you if you'd like to add one or more to it.
    You should see one of the following messages at the
    command line.
    Option 1
    Scanning all disks for Windows installations.
    Please wait, since this may take a while...
    Successfully scanned Windows installations.
    Total identified Windows installations: 0
    The operation completed successfully.
    Option 2
    Scanning all disks for Windows installations.
    Please wait, since this may take a while...
    Successfully scanned Windows installations.
    Total identified Windows installations: 1
    [1] D:\Windows
    Add installation to boot list? Yes<Y>/No<N>/All<A>:
    If you see:
    Option 1: Move on to Step 5. This result most likely means that Windows installation data in the BCD store exists but bootrec couldn't find any
    additional installations of Windows on your computer to add to the BCD. That's fine, you'll just need to take a few extra steps to rebuild the BCD.
    Option 2: Enter Y or Yes to the
    Add installation to boot list? question, after which you should see a
    The operation completed successfully message, followed by a blinking cursor at the prompt. Finish up with Step 10 toward the bottom of the page.
    Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.
    At the prompt, execute the bcdedit command as shown and then press Enter:
    bcdedit /export c:\bcdbackup
    The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a
    file extension.
    The command should return the following on screen:
    The operation completed successfully.
    meaning the BCD export worked as expected.
    At this point, you need to adjust several
    file attributes for the BCD store so you can manipulate it.
    At the prompt, execute the attrib command exactly like this:
    attrib c:\boot\bcd -h -r -s
    What you just did with the attrib command was remove the
    hidden, read-only, and
    system attributes from the file
    bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.
    To rename the BCD store, execute the ren command as shown:
    ren c:\boot\bcd bcd.old
    Now that the BCD store is renamed, you should now be able to successfully rebuild it, as you tried to do in Step 3.
    Note: You could delete the BCD file entirely since you're about to create a new one. However, renaming the existing BCD accomplishes the same thing since it's now unavailable to Windows, plus provides you yet another layer of backup, in
    addition to the export you did in Step 5, if you decide to undo your actions.
    Try rebuilding the BCD again by executing the following, followed by Enter:
    bootrec /rebuildbcd
    which should produce this in the Command Prompt window:
    Scanning all disks for Windows installations.
    Please wait, since this may take a while...
    Successfully scanned Windows installations.
    Total identified Windows installations: 1
    [1] D:\Windows
    Add installation to boot list? Yes<Y>/No<N>/All<A>:
    meaning that the BCD store rebuild is progressing as expected.
    At the Add installation to boot list? question, type Enter Y or
    Yes, followed by the Enter key.
    You should see this on screen:
    The operation completed successfully.
    meaning that the BCD rebuild is complete.
    Restart your computer.
    Assuming that an issue with the BCD store was the only problem, Windows should start as expected.
    If not, continue to troubleshoot whatever specific issue you're seeing that's preventing Windows from booting normally.
    Important: Depending on how you started System Recovery Options, you may need to remove a disc or
    flash drive before restarting.

  • Can't complete a clean installation of WIN 7 PRO on an Acer Aspire 4738

    Hello,
    If any one could help me with this problem i would really appreciate it.
    I have an Acer Aspire 4738-6888 (icore 5, 3GB RAM, 500GB HD), it was running win 7 ultimate 32 bits but started working erratically so i decided to perform a clean installation. HD was formatted entirely.
    Then tried installing WIN 7 PRO 64 bits from a DVD, but the installation program does not load and shows a kernel error oxc0000098
    It is funny that if i use a WIN 7 PRO 32 bits DVD, the installation programs loads and starts, everything seems to run normally (HD partitions can be created and formatted, Files are expanded and configuration begins) but just after the third restart
    when the assistant shows the message " preparing to run windows for the first time " the blue screen appears showing a "Memory_Management" error. Tried one more time but using a WIN 7 ULTIMATE 32 bits DVD with same results.
    Finally, I tried using the "repair option" from the DVD and get this message:
    StartupRepairOffline
    01: 6.1.7600.16385
    02: 6.1.7600.16385
    03: unknown
    04: 21350397
    05: ExternalMedia
    06: 1
    07: FailureDuringSetup
    OS version: 6.1.7601.2.1.0.256.1
    Regional config: 3082
    Before hand thanks a lot for your help,
    Rgds,
    GCH.

    Hi GustavoCh,
    What issue did you meet so you want to reinstall?
    Could you please use the Windows install image to install Windows in other computer or virtual machine? So we can make sure this issue is not caused by the image.
    I think this issue is related to hardware, please contact the manufacturer for better help.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • [SOLVED] Questions on Acer Aspire One netbook resolution

    I've been digging through the wiki and googling everything, but I just can't figure out how to get the dang resolution right!
    I've got an Acer Aspire One (D257, model ZE6) and technically, it should be 1024 x 600. Everything seems like it's the right size, but it's just slightly blurry and looking at it makes me a bit dizzy, like it's just slightly off. I've read that the Acer netbooks are SIZED to 1024x600 but use the RESOLUTION of 1024x768. Could anyone confirm this? Am I way off base?
    The wiki suggests using xrandr to change the resolution, but I get the BADMATCH error. The solutions I googled mostly involve editing an xorg.conf, which doesn't exist. Trying to generate it myself always fails (xorg -configure, which always leads to "number of created screens does not match number of detected devices").
    Maybe I've just missed something really obvious... But I can't seem to find it.
    Last edited by DevPug (2013-07-27 17:41:41)

    WonderWoofy wrote:There is the kernel driver, which is the i915 module from the kernel, and then there is the Xorg driver, which is provided by the xf86-video-intel package.  Do you have both?
    OH MY GOD. I followed the wiki to a T, but when I double-checked, I didn't have i915 listed in the MODULES="" line. So I must have not saved it, in my hurry to get everything going. My desktop looked okay-ish, but my web browser was resizing text improperly, hence the 'dizzy' effect.
    Thank you from the bottom of my heart for catching my silly oversight!
    Gusar wrote:I wouldn't say "crappy display", I'd say you don't like the default anti-aliasing.
    This is also true, though... My next task is to find better anti-aliasing that I can get along with. The default just isn't cutting it, now that I can see it clearly.
    Last edited by DevPug (2013-07-27 17:57:58)

Maybe you are looking for

  • Upgrading Solaris 10 8/07 to run LDOMs?

    I am trying to get to a point where I can create and run logical domains - the HW is a SPARC Enterprise T5220, OS is "Solaris 10 8/07 s10s_u4wos_12b SPARC" - and according to the book ("BEGINNERS GUIDE TO LDOMS: UNDERSTANDING AND DEPLOYING LOGICAL DO

  • Userexit for Qty Changing after TO Confirmation and before PGI

    Hi Experts, I am seeking help for a scenario as below. 1. The delivery has a situation where after the Transfer order is confirmed and before the PGI is done, I have to put a check of Qty for non-stock items (they are not relevant for Transfer order)

  • Access Based Enumeration not working Windows 2012 R2 Datacenter

    I am having a hard time figuring out why Access Based Enumeration is not working for me.  I have set and re-set the settings and I'm still able to see folders I should not. I do get denied access on folders I don't have access to.  I have checked eff

  • Save As in InfoPath List

    Hello, I have a custom form, works fine. But I want to be able to add a save as button and requires you to change the title of the form. I know you can do this in InfoPath for a form library but not in a list. Has anyone ever done this before?

  • How to remember my Lock code?

    It's a Nokia 6600 the classic one, I have created my own Lock code before, My device is not yet locked, Can not remember it at all !! Attachments: 6600_main_ar-96x96[1].jpg ‏3 KB