Acer Aspire M3641-X223W - Full Hardware Specs

Hi All, I've bought the Acer Aspire M3641-X223W about 6 years (?) back. Now i want to use it for my homeserver (maybe upgrade some things). But i need the full in depth specs of the hardware. I know the general specs (4GB RAM, 640HDD, RADEON 3450, Intel Core 2 Duo E5200), but especially the in depth specs of the motherboard i couldn't find. For example the manufacturer (if this is not Acer), type / etc. Is there one overview where all the specs are mentioned? I could not find it that easy online or on the website of Acer. Thanks!

Not sure if the link below is your computer. http://www.crucial.com/usa/en/compatible-upgrade-for/Acer/aspire-m3641 It probably is an Acer motherboard, but I really don't know if Acer has their own factory or if they contract it out to someone like foxconn,etc... http://www.newegg.com/Product/Product.aspx?Item=N82E16813186140 Note: My links are just guesses/examples and may not even be remotely accurate guesses. Edit: Even if that foxconn motherboard is similiar to your motherboard, Acer probably has it customized....so not all of the ports/headers would be accurate.

Similar Messages

Flash Player crashes instantly, cannot disable hardware acceleration - Ubuntu 11.10 Acer Aspire One

Ubuntu 11.10 32 bit
Firefox 10.0.2 32 bit
Flash 11.1 r102
I have a Acer Aspire One netbook
As soon I hit "play" on a flash movie, flash player crashes
I have tried to disable hardware acceleration to eliminate that possibility, but the check box does not respond to input
I read that the flash player system controls do not respond when there are scrollbars around the screen (as there are on a small netbook screen) so I zoomed out to get rid of the scrollbars, but the systems setting menu is still unresponsive when I try to disable hardware acceleration

Thanks Carl, but as I mentioned:
>I have tried to disable hardware acceleration to eliminate that possibility, but the check box does not respond to input
eg. when I right slick on a player, the setting menu opens up, but the "Enable hardware" check box does not respond to a mouse click and remains on I also tried tabbing around the settings menu and using the return key to select/ de-select but that doesn't work either

[Solved] Suspend to ram doesn't work correctly on Acer Aspire 5100

Hi people of the archlinux forum.
Finally I decided to change from ubuntu to archlinux because I wanted to learn more about the world of linux.:D
I have already almost completely set up my laptop, but I have a problem when suspending to ram. The problem comes out when i wake up the laptop, and the screen starts to flicker and will not go away until i restart the laptop.
This is my laptop after the suspend:
I'm using pm-utils to suspend and hibernate my laptop, and the hibernate works fine. All settings were made following the arch wiki.
this is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "glx"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "2174"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS482 [Radeon Xpress 200M]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I know you maybe need more info, but i don't really know what do you need... please tell me what do you need and a post it!
Sorry for my english this isn't my native languaje... Thanks you for all
Last edited by geonunez (2010-07-08 20:19:09)

I have the same problem with my Acer Aspire 5100 (video ATI Xpress1100).
xorg.conf is not used. Turning KMS off doesn`t help.
I have tried to use uswsusp, but it doesn`t help. s2ram -n output correctly identify my laptop, which means it is in "whitelist" and correct settings for this hardware is known. s2ram suspend works, but screen blinking after waking up remains the same.
[Sydorenko@SLE ~]$ sudo s2ram -n
Machine matched entry 17:
sys_vendor = 'Acer *'
sys_product = 'Aspire 5100 *'
sys_version = ''
bios_version = ''
Fixes: 0x3 S3_BIOS S3_MODE
This machine can be identified by:
sys_vendor = "Acer "
sys_product = "Aspire 5100 "
sys_version = "V3.10A"
bios_version = "V3.10A"
See http://suspend.sf.net/s2ram-support.html for details.
Last edited by SydMax (2010-06-06 16:53:50)

Problem with touchpad and Windows 8.1. Acer Aspire E5-511

I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).

SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone

[HOWTO] Installing Arch Linux stable release on Acer Aspire One 522

[This is a work on progress and my first howto ever]
These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
This Howto borns with the intention to address this problem.
You need to be familiarized with Linux internals to follow this howto.
(Expect this howto to become useless with new stable releases of ArchLinux.)
Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
Just boot with systemrescuecd
Mount your external harddisk on /mnt/floppy for example
Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
Result image was about 22GB size
This image will restore partition table, boot sector and all data if things go wrong.
I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
If you have some Gentoo Linux experience you will find those steps really familiar.
You will need 2 USB pendrives or similar storage options.
One is needed to boot into your netbook, and the other to store our custom archlinux build.
Making an updated ArchLinux system
1) Make a local dir on your existing linux system
# mkdir ./newarch
2) Install pacman database on it
# pacman -Sy -r ./newarch
3) Install base system
# pacman -S base -r ./newarch
4) Let's chroot inside
# cp /etc/resolv.conf ./newarch/etc/
# cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
# mount -t proc proc ./newarch/proc
# mount -t sysfs sys ./newarch/sys
# mount -o bind /dev ./newarch/dev
# chroot ./newarch /bin/bash
5) Edit configuration files
# nano -w /etc/rc.conf
# nano -w /etc/hosts
# nano -w /etc/mkinitcpio.conf
Forget /etc/fstab for now since you don't know what partitions to use yet
6) Generate kernel image
# mkinitcpio -p kernel26
7) Generate locales
# nano -w /etc/locale.gen
# locale-gen
8) Make a tarball with our custom ArchLinux
# exit
# umount ./newarch/proc
# umount ./newarch/dev
# umount ./newarch/sys
# tar -cvpf newarch.tar ./newarch
9) Copy this tarball to an USB pendrive or external harddisk
10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
You should be booting into SystemRescueCD without any problem.
After initialization you will end in a root prompt.
11) Let's partition the disk
You will find 3 partitions if this is your first time:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
You have plenty of space with sda3, about 230G.
So run fdisk/cfdisk and delete /dev/sda3
Now create a 100M partition for boot
Now create a Extended partition with all the space left
Now create a 1GB logical partition for swap
Now create a 10-15 GB logical partition for root system
And finally a logical partition for our home partition with all space left
Your partition table should look like this:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 29771775 102400 83 Linux
/dev/sda4 29771776 488397167 229312696 5 Extended
/dev/sda5 29773824 31821823 1024000 83 Linux
/dev/sda6 31823872 63281151 15728640 83 Linux
/dev/sda7 63283200 488397167 212556984 83 Linux
12) Create filesystems
I choosed ext2 for boot, and reiserfs for root and home partitions.
# mke2fs /dev/sda3
# mkreiserfs /dev/sda6
# mkreiserfs /dev/sda7
# mkswap /dev/sda5
13) Mount partitions
# mkdir arch
# mount /dev/sda6 arch
# mkdir arch/boot
# mount /dev/sda3 arch/boot
# mkdir arch/home
# mount /dev/sda7 arch/home
14) Copy our custom ArchLinux build on it
# mount /dev/sdb1 /mnt/floppy (for example)
# cd arch
# tar -xvpf /mnt/flopy/newarch.tar
15) Configure /etc/fstab
Mine is as follows:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda3 /boot ext2 defaults 0 1
/dev/sda6 / reiserfs defaults 0 1
/dev/sda7 /home reiserfs defaults 0 1
/dev/sda5 swap swap defaults 0 0
16) Chroot in your new system
# mount -t proc proc ./proc
# mount -t sysfs sys ./sys
# mount -o bind /dev ./dev
# chroot ./ /bin/bash
17) Install grub
# grub-install
Edit /boot/grub/menu.lst to suit your needs
Mine looks like this:
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26.img
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26-fallback.img
title Windows 7 Recovery
rootnoverify (hd0,0)
makeactive
chainloader +1
As you see, you can restore Windows 7 Starter from Grub.
18) Change root password
# passwd
19) Add a regular user account
# useradd -G video,audio,users -m username
# passwd username
20) You're done!
# exit
# cd ..
# umount ./arch/proc
# umount ./arch/dev
# umount ./arch/sys
# umount ./arch/boot
# umount ./arch/
# reboot
Remove the usb stick from your netbook.
If all went ok, you will be inside your new stable and updated ArchLinux system
Next post is reserved for software configurations specific to the Acer Aspire One 522
Last edited by tigrezno (2011-04-20 12:22:38)

Using acpid to achieve the following:
- Change screen brightness when operating in battery mode
- Power off when the power button is pressed
- Suspend when the lid is down
- Reduce CPU frequency speed to maximize battery usage
Remember that system suspend is only supported by ati free driver xf86-video-ati
1) Install acpid daemon and cpufrequtils
# pacman -S apcid cpufrequtils
2) edit acpid handler script
# nano -w /etc/acpi/handler.sh
Change the following section:
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
for:
ac_adapter)
case "$2" in
ACAD)
case "$4" in
00000000)
echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 800Mhz
cpufreq-set -c 1 -f 800Mhz
00000001)
echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 1000Mhz
cpufreq-set -c 1 -f 1000Mhz
esac
*) logger "ACPI action undefined: $2" ;;
esac
Make sure you changed AC) for ACAD)
Now change this other section:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
with:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) poweroff ;;
*) logger "ACPI action undefined: $2" ;;
esac
Change:
button/lid)
#echo "LID switched!">/dev/tty5
logger "ACPI group/action undefined: $1 / $2"
for:
button/lid)
pm-suspend && /etc/rc.d/network restart
logger "ACPI group/action undefined: $1 / $2"
Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
3) Start acpid and load modules
# modprobe powernow-k8
# /etc/rc.d/acpid start
Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
Stopping system freezes due to ethernet driver
The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
MODULES=(!ath9k !atl1c)
Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
Correctly starting wireless at boot
I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
wi_up()
eval iwcfg="\$wlan_${1}"
[[ ! $iwcfg ]] && return 0
/usr/sbin/iwconfig $iwcfg
[[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
sleep $WIRELESS_TIMEOUT
/usr/sbin/iwconfig $iwcfg
bssid=$(iwgetid $1 -ra)
It will do the trick and will start at boot correctly. This is not a solution but a fix.
Adjust Touchpad to disable false taps
What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
This means you can write and press space without having the cursor click out of the window and such.
# synclient AreaLeftEdge=150
# synclient AreaRightEdge=1300
# synclient AreaTopEdge=300
Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "AreaTopEdge" "300"
Option "AreaLeftEdge" "150"
Option "AreaRightEdge" "1300"
EndSection
You can play with those values. They just work for me.
Last edited by tigrezno (2011-04-23 13:49:48)

Firefox Slow Even When Offline on Acer Aspire One ao751h-1145

I have a 2gb RAM, 1.33 Ghz Intel Atom CPU Z520, and a fresh install of Windows 7 Ultimate on my Acer Aspire One ao751h-1145. I have no viruses and no programs running in the background. I've installed and uninstalled various versions of Firefox (4, 11, 12) and even upon a fresh install before I edit preferences, bookmarks, or add-ons, the PROGRAM ITSELF is super slow. It isn't using any more RAM or processer speed that it should, however. What it does: Menus are slow to open, scrolling is jumpy, and switching from tab to tab takes like 2 seconds. Internet Explorer 8 works just fine, as do all other programs on the computer. Also, it works fine in Safe Mode. I can't find anything regarding this issue online. Help!

Thanks for reply. But, drivers are up to date. However, I found on this page (https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers) that I might want to disable hardware acceleration. I did that through the options menu and Firefox is "usable," but still not what I'm used to on other computers and still not as fast as IE on the same computer. Since turning of the hardware acceleration helped, what else can I do along the same lines to speed it up more? I know a 1.33GHz processor is plenty fast enough to run only firefox by itself. The computer I'm on now (my non-netbook) runs at 700MHz when on batteries and has no performance issues. I hope I can get it because I don't want to use another browser! :(

Acer Aspire V5|123 - Shutting Down Problems

Hi,
I have bought an Acer Aspire V5|123 netbook yesterday. I had done a clean install of Windows 8.1 (with Pro). At the moment I was trying to do some updates on this netbook to get to the latest updates. But each time this netbook updates, the shut down method is taking like 3 mins to boot back up again which is taking longer than usuall!
I have a Compaq (from HP) computer which has Windows 8.1, the computer I use mostly is this - the boot up and shut down times are fast and quick. The operating system runs smoothly on it and it works fine and never had a problem for a few months now!
Also, the power button light stays on for like 5 mins after the Windows shut down. So, I have been surfing on the web to find a solution to this simular problem. I have found out a forum thread with someone answering about replacing the battery or replace the BIOS battery with a new one and see if that solves the problem.
Thanks!
Best Regards,
Benjamin
[edited for privacy-please do not post personal or unique information such as but not limited to full names, email addresses, phone numbers, serial numbers, etc.]

UPDATE: Opened the machine to change the coin-cell battery and re-insert the memory card to see if this has solved the problem. Which it hasn't! Any solutions anybody?

Acer Aspire one will not boot up

When I boot up my Acer Aspire one I get a message that says:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "Repair your computer"
If you do not have this disc. contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000e
Info: An error occurred while attempting to read the boot configuration data.
The only problem is that my net book has no disc drive. What am I to do??

From ABOUT:
Start
System Recovery Options.
There are several ways of starting System Recovery Options. See How To Access the System Recovery Options Menu in the link above for help.
Open Command Prompt from the System Recovery Options menu.
Note: The
Command Prompt available from the System Recovery Options menu is very similar to the one you may be familiar with within Windows. Also, the following procedure should work as described in both Windows 7 and Windows Vista.
At the prompt, type the bootrec
command as shown below and then press Enter:
bootrec /rebuildbcd
The bootrec command will search for Windows installations not included in the Boot Configuration Data and then ask you if you'd like to add one or more to it.
You should see one of the following messages at the
command line.
Option 1
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 0
The operation completed successfully.
Option 2
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
If you see:
Option 1: Move on to Step 5. This result most likely means that Windows installation data in the BCD store exists but bootrec couldn't find any
additional installations of Windows on your computer to add to the BCD. That's fine, you'll just need to take a few extra steps to rebuild the BCD.
Option 2: Enter Y or Yes to the
Add installation to boot list? question, after which you should see a
The operation completed successfully message, followed by a blinking cursor at the prompt. Finish up with Step 10 toward the bottom of the page.
Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.
At the prompt, execute the bcdedit command as shown and then press Enter:
bcdedit /export c:\bcdbackup
The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a
file extension.
The command should return the following on screen:
The operation completed successfully.
meaning the BCD export worked as expected.
At this point, you need to adjust several
file attributes for the BCD store so you can manipulate it.
At the prompt, execute the attrib command exactly like this:
attrib c:\boot\bcd -h -r -s
What you just did with the attrib command was remove the
hidden, read-only, and
system attributes from the file
bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.
To rename the BCD store, execute the ren command as shown:
ren c:\boot\bcd bcd.old
Now that the BCD store is renamed, you should now be able to successfully rebuild it, as you tried to do in Step 3.
Note: You could delete the BCD file entirely since you're about to create a new one. However, renaming the existing BCD accomplishes the same thing since it's now unavailable to Windows, plus provides you yet another layer of backup, in
addition to the export you did in Step 5, if you decide to undo your actions.
Try rebuilding the BCD again by executing the following, followed by Enter:
bootrec /rebuildbcd
which should produce this in the Command Prompt window:
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
meaning that the BCD store rebuild is progressing as expected.
At the Add installation to boot list? question, type Enter Y or
Yes, followed by the Enter key.
You should see this on screen:
The operation completed successfully.
meaning that the BCD rebuild is complete.
Restart your computer.
Assuming that an issue with the BCD store was the only problem, Windows should start as expected.
If not, continue to troubleshoot whatever specific issue you're seeing that's preventing Windows from booting normally.
Important: Depending on how you started System Recovery Options, you may need to remove a disc or
flash drive before restarting.

Can't complete a clean installation of WIN 7 PRO on an Acer Aspire 4738

Hello,
If any one could help me with this problem i would really appreciate it.
I have an Acer Aspire 4738-6888 (icore 5, 3GB RAM, 500GB HD), it was running win 7 ultimate 32 bits but started working erratically so i decided to perform a clean installation. HD was formatted entirely.
Then tried installing WIN 7 PRO 64 bits from a DVD, but the installation program does not load and shows a kernel error oxc0000098
It is funny that if i use a WIN 7 PRO 32 bits DVD, the installation programs loads and starts, everything seems to run normally (HD partitions can be created and formatted, Files are expanded and configuration begins) but just after the third restart
when the assistant shows the message " preparing to run windows for the first time " the blue screen appears showing a "Memory_Management" error. Tried one more time but using a WIN 7 ULTIMATE 32 bits DVD with same results.
Finally, I tried using the "repair option" from the DVD and get this message:
StartupRepairOffline
01: 6.1.7600.16385
02: 6.1.7600.16385
03: unknown
04: 21350397
05: ExternalMedia
06: 1
07: FailureDuringSetup
OS version: 6.1.7601.2.1.0.256.1
Regional config: 3082
Before hand thanks a lot for your help,
Rgds,
GCH.

Hi GustavoCh,
What issue did you meet so you want to reinstall?
Could you please use the Windows install image to install Windows in other computer or virtual machine? So we can make sure this issue is not caused by the image.
I think this issue is related to hardware, please contact the manufacturer for better help.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

KDE 4.4.0 crashes when logging in on Acer Aspire One

Hello,
I just made an ArchLinux fresh installation on my Acer Aspire One, A1-ZG5. This is my problem: when I log in to KDE, the splash screen comes and then screen freezes. There is one gray window in the top of the screen that just flashes, no windows nor plasma can be seen. I have installed other KDE distros in the same netbook and worked well. I had had the same problem once, when I installed KDE 4.3.1, and never could fix it... KDE seems to be working like in the background; config files are still being created with the frozen screen...any ideas?...Thanks for your help!...:rolleyes:

is your disk full?
if not, try to switch off the services, remone network-manager plasmoids, and try again

Acer Aspire One will only connect via Fon now on H...

Since activating Fon on my BT Home Hub my Acer Aspire One - running Linux Linpus - will no longer log on to the 'normal' wireless connection on my hub, only Fon, which has limited bandwidth, etc.
Anybody know why? Have a solution?
I've 'proved' it's the Fon activation my doing a full reset on the hub. My One connected normally until Fon was reactivated, then back to Fon connection only

Re WPA - it was fine until Fon was activated!
When I did a factory reset on the hub the One connected as normal - until Fon reactivated at which point it was back to via Fon only!
As the MAC address for FON and your normal SSID would be the same, perhaps it is seeing your normal SSID and assuming that is FON, and connecting to that in preference to your normal one.
Really strange problem.......
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

PXE with Acer Aspire One D150 ?

Hello
We are about to start testing Acer Aspire One D150 and I cant get it to
work with PXE boot, it wont find the NIC drivers. The NIC is "Atheros
something" and I dont even know where to start. Tha machine does not have a
CD so I cant boot with the boot-cd either...
I tried putting in the new imaging files from zdm7sp1ir3a_hp3 (feb -09) but
same result, coudnt find NIC.
Please advice.

How bloody hard can it be for the Novell-people to post an image which works
for Aspire one D150 ? I dont have the knowledge to compile this stuff
myself, I hate when this happens as soon as we are testing new hardware...
So... there isnt a working image today ? :(
/D
"mpullen" <[email protected]> skrev i meddelandet
news:[email protected]...
>
> Thomas--
>
> A couple of days ago 'I posted a similar request in this forum'
> (http://forums.novell.com/novell-prod...ml#post1753904),
> which included the information you've requested:
>
> Attansic (Atheros) AR8114 "atl1e" NIC (device ID 0x1969 0x1026)
>
> Same as Dan, we've tried using the 'Feb 2009 imaging driver update'
> (http://download.novell.com/Download?...d=aC2y2x_7o_Q~) (initrd dated
> 02/21/2009). The "atl1e" driver is -not- in that update, nor in the
> 12/20/2008 driver update (initrd 12/20/2008), nor the 11/18/2008 initrd
> we had been using originally. The atl2 driver apparently included in the
> 12/20/2008 update (but excluded from the 02/21/2009 update) -does not
> work- with the D150's NIC.
>
> The 'vendor website' (http://partner.atheros.com/Drivers.aspx) does not
> offer a Linux driver for the L1e NIC (the L1e is -different- from the
> L1); however, 'a source file'
> (http://jan.ucc.nau.edu/wal2/l1e-linux-v1.0.1.0.tar.gz) for a atl1e
> Linux driver is linked in an article at 'ATL1E Linux Driver for Ethernet
> controller: Attansic Technology Corp. Unknown device 1026 (rev b0)'
> (http://jan.ucc.nau.edu/wal2/atheros_attansic.html). Unfortunately, the
> build instructions there are for Ubuntu 8.04, which isn't helpful in a
> SUSE environment.
>
> I would love to learn to compile this myself, but cannot find a Linux
> environment in which has the right kernel source (2.6.16.60-0.21) for
> the Feb 2009 update (nor even for 2.6.16.46-0.12, the kernel from our
> previous stable imaging environment.) I've tried to 'follow the
> instructions in the Zen 7 Admin Guide'
> (http://www.novell.com/documentation/...a/a74bm8u.html),
> but don't quite have the Linux knowledge depth yet to fill in the gaps
> necessary to for it to work in our environment. Any hints on this would
> be welcome here; I'd certainly post a working driver back here if we can
> get one made!
>
>
> Thanks!
>
> Mike Pullen
> Computer Tech
> School District of Baraboo, WI
>
>
> --
> mpullen
> ------------------------------------------------------------------------
> mpullen's Profile: http://forums.novell.com/member.php?userid=46061
> View this thread: http://forums.novell.com/showthread.php?t=365473
>

How to Install Windows 7 Home Premium (32bit) with No legacy option in BIOS setting. Just UEFI. in Acer Aspire E1-410 ?

I just broke my older Acer Aspire 4752G.
I just backup entire Partition my Windows 7 Home Premium (32bit) with Acronis True Image Home 2014 BootCD Premium.
intend to restore in this brand new Acer Aspire E1-410.
Acer Aspire E1-410 don't have Legacy Option only UEFI
Acronis True Image Home 2014 BootCD Premium fully support EUFI but alas my Original Windows don't boot
So I intend to use repair BootRec command prompt
These CD Windows won't detect in these Acer
So I call Acer Technical Support They said :
there is NO OTHER WAY to change this UEFI to LEGACY MODE (Build-in Bios mode CANNOT change other than UEFI)
you must install via DVD who FULLY SUPPORT UEFI -> Windows 8 or Windows 8.1 (ONLY in x64bit mode).
I hope you can resolve these for me.
Thank you.

It is possible to install Windows 7 Home Premium 32-bit from DVD to a UEFI based hardware, but must be done using an answer file. It may or may not work if you are using a recovery DVD. Either way, the OS is not supported on that hardware.
Windows 8 32bit is supported on UEFI hardware.
The problem with Win7 32bit on UEFI is a problem in the bootloader. The OS cannot boot because the bootloader cannot find the OS. I had suspected it may be possible to get the OS to boot by using BCDBoot, but since it isn't supported I have not put in any
effort to determine the method of doing it.

Webcam troubles Acer Aspire One

I have strange webcam behaviour on me Acer Aspire One A110
After netbook turn on, it works fine till closing netbook cover. After this skype, cheese, xawtv don't shows anything till reboot.
Right after turning on
dmesg
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
lsusb
Bus 001 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Closing and open netbook cover
Mar 20 09:05:05 greenhawk kernel: usb 1-5: USB disconnect, address 2
Mar 20 09:05:05 greenhawk kernel: usb 1-5: new high speed USB device using ehci_hcd and address 3
Mar 20 09:05:05 greenhawk kernel: usb 4-1: new full speed USB device using uhci_hcd and address 2
Mar 20 09:05:05 greenhawk kernel: usb 4-1: not running at top speed; connect to a high speed hub
Mar 20 09:05:06 greenhawk kernel: usb 4-1: configuration #1 chosen from 1 choice
Mar 20 09:05:06 greenhawk kernel: uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Mar 20 09:05:06 greenhawk kernel: input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input11
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Note: bus and Device changed 1:2 to 4:2
And that's all - webcam not operational till reboot
cheese -v
Cheese 2.28.1
Probing devices with HAL...
Found device 064e:d101, getting capabilities...
Detected v4l2 device: Acer Crystal Eye webcam
Driver: uvcvideo, version: 256
Capabilities: 0x04000001
Probing supported video formats...
libv4l2: error turning on stream: Ошибка ввода/вывода (Input/Output Error on Russian)
Any advices to solve this?
PS: Sorry for ugly English, not my native

Additional information
I made two lsusb -s b:d -v dumps before and just after netbook cover closing. There are results:
diff ./acer_before.lsusb ./acer_after.lsusb
2c2
< Bus 001 Device 003: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
> Bus 004 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
277c277
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x03ff 1x 1023 bytes
297c297
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x0200 1x 512 bytes
317c317
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x0180 1x 384 bytes
As you can see, magicaly sizes of data packets was changed

Acer Aspire 5253 Slow with archlinux

Hello,
I have an Acer Aspire 5253 laptop with the following characteristics:
6Gb RAM
2 cpu's AMD 1.2 GHz 64-bit
Ati radeon hd 6250
500Gb HDD
Archlinux use for about a year. I have used many of the other distributions
existing linux and my experience with these has been quite frustrating.
Gnome3 - Gnome-shell:
The free drivers do not support for 3D and everything works quite slow. menus
running slow and when I open more than 3-4 windows all works pretty bad.
With proprietary drivers experience with gnome-shell is reduced to shit.
KDE:
Works better than gnome 3, much more fluid. The problem is that when I open several
windows desktop becomes slow. Eg. Use GIMP and paint with the brush is
delay between the mouse and the lines painted.
XFCE:
It works better than Gnome 3 and KDE but I wonder: Why use a archlinux
laptop with 6GB of ram and a "good" graphics card if I can not even draw
with a brush in GIMP?
Could anyone advise me to use my laptop so that you can leverage your hardware without problems?

What CUDA program are you running? The only software I use that takes advantage of CUDA is Blender, but I build it from source and it finds the CUDA libs just fine. What CUDA dev package did you install?

Acer Aspire M3641-X223W - Full Hardware Specs

Similar Messages

Maybe you are looking for