Acer Aspire V17 Nitro Black Number Lock

I know this has been asked before but the answers given have not worked.1.  Edit the registery.2.  Disable fast startup.I have an Acer Aspire V17 Nitro Black (VN7-791G) with Windows 8.1.  I want Num Lock on always.  When I boot the machine in the morning it is off.  When I wake the machine after a period of inactivity it is off.  I have edited the registry under the keyboard settings per other replys in these forums with no change.  I have disabled fast startup per replys in these forums again with no change.  I contacted Microsux because I think it is a windows issue but they said to contact Acer.  Acer chat is of no use they want you to pay them to modify the registry.  So here I and I believe others are stuck with a machine that does its own thing.

I'm having the same issue. Changing the registry values fixes the num-lock status at startup, but makes no difference when the computer goes to sleep. As soon as it goes to sleep, num lock is turned off. Microsoft support says "Check with your System/Mortherboard Maker's Support, their on-line documentation, and ask
in their forums.
Some makers will have settings in the BIOS, others will provide utilities to do it, and others may
have methods in place which prevent doing it in Windows." Is there any such utility/setting that can fix this issue?It is my only complaint about this laptop.

Similar Messages

  • Acer Aspire E5-473-35TX or Acer Aspire V15 Nitro Black Edition VN7-571G-73ZJ ?

    Hi! I'm planning to buy a new laptop, i already browse some online store and found thishttp://www.lazada.com.ph/acer-aspire-switch-10-e-sw3-013-10w8-64gb-intel-101-2-in-1-touchscreen-laptop-shark-gray-534535.html 
    and 
    http://www.lazada.com.ph/acer-aspire-e5-473-35tx-4gb-intel-core-i3-4005u-14-laptop-with-free-acer-laptop-bag-and-smart-bro-4g-pocket-wi-fi-527127.html, just want to ask which one is a good catch? Any thoughts will be much appreciated. Thanks!

    Boy, those are two very different machines! The first one is very handy if you are carrying the laptop with you most of the time, especially if you are switching between carrying it, using it as a laptop and using it as a tablet fairly often. The detriment is that the screen is small, only 10 inch. The second one is a lot more powerful and larger, but it will be more of a hassle to carry (you will want a backpack or briefcase). It's better suited if you are traveling between locations and want to set it up for extended use at each destination. You are going to be less likely to want to pull it out for ten minutes of quick web surfing.

  • New Acer Aspire v17 Black Edition GTX 960m Overheating Problems?

    I just bought and received Acer Aspire v17 Black Edition and started playing some games on it.I always check the bottom of the laptop once in a while with my hand to make sure it isn't overheating.When I checked after some gaming today, the surface was extremely hot so I downloaded the Core Temp software to check what the exact temperatures were. I found out that the temperature of all 4 cores ranged from 85 Degrees to 95 degrees celsius when gaming. I've done some research online and was informed that temperature at this range have the risk of causing internal damage. CoolBoost is on, Active cooling is on. Core Temp might be displaying the wrong temperature anways. Is this normal or abnormal?

    I have to agree with Pocopony22.  I think the main issue in cooling effectiveness here is the form factor of the case.  Being so thin I imagine there isn't much space to allow cooler ambient air to convey the heat out of the system.  Although I often wonder why manufacturers don't utilize some dynamics like air multiplication and a "jet" engine effect to use the thinness to create a more forceful air flow... I'm sure there is some reason I am not thinking of since I do not design notebooks for a living. LOL.  Anyhow based the data sheets for the 4720hq, the safe max operating temp is 100C and while the 960M is not listed in data sheets I suspect it could handle 90/95C safely.  While I personally do not condone such temperatures nor would I settle for those, in theory the processors are safe, the only thing I question is the boards and other components near these since everything is so tight.   In the end would I run my CPU at 100C for 4 or 5 hours?  No way, I would do like blackice55, throttle the CPU myself (since that way I can adjust my efforts based on a controlled throttling, rather than having to adjust on the fly if the CPU throttles on it's own) and keep the temps down a bit. Follow these simple guidelines to extend the longevity of your device: Play in area with cool ambient temps, not outside on a summer day.Use a cooler unit. Find one with fans that you can adjust the airflow (if you use your cooler on more than one device) or buy with an appropriate air flow direction based on the system cooling flow.Utilize CPU throttling in a controlled manner.Give your computer a rest once every few hours.  Let the CPU idle and cool before shutting off.  It doesn't take long with the fans running, but can remain hot significantly longer if shut down immediately.BUY ADH warranty.  Spend a few hundred bucks now so you don't have to spend another 1-2k later...Device dies from not following 1-5, always have a contingency plan. Regards,-Eli Note: Edited safe temp for GTX-960M since it's temps are not listed in the data sheets.

  • Install Windows 8.1 Pro on Acer Aspire V Nitro VN7-591

    Hi forum, I recently bought the Acer Aspire V Nitro VN7-591 and I noticed that it only comes with the Core Edition of Windows 8.1. As I need some of the features of the Windows 8.1 Pro Edition (joining domains, remote display etc.) I would like to upgrade the System to Windows 8.1 Pro. I still have an unused Pro retail key (no OEM, no Upgrade Pack) here so at the moment I'm downloading the ISO for Windows 8.1 Pro. But prior to installation I would like to make sure that everything works out fine and I don't run intro problems. First of all: is there anything I need to save from the old OS (except from the recovery partition- I already saved that to a USB drive using the recovery program provided by Acer)? Do I have to know my Product Key (using for example a key viewer software) just in case? Do I have to disable secure boot in BIOS? Second: can I just install Windows 8.1 Pro using my ISO and installing the drivers from the Acer support website? Drivers should still work, right? Third: if I ever want to switch back to Windows 8.1 Core (the OEM edition) do I just use the USB pen drive created with the acer recovery tool? Will my retail Windows 8.1 Pro Key be usable again if I switch back to the original OS? Sorry for asking that many questions but I just have to make sure that it runs trough right in the first place because I need the Laptop to function. What would be your standard procedure to this kind of "problem"? Thanks in advance and with regards,The_DJ  Edit:I might have forgotten to mention that I want to do a clean reinstall without all the bloatware from Acer. That's why I'm using the Windows 8.1 Pro "Vanilla" ISO and if I ever want to switch back to core use the Windows 8.1 Core "Vanilla" ISO. Is that possible or would I have to use the recovery partition saved to my USB drive?

     Changing the Operating System may cause driver conflicts. The compatible drivers for Windows 8.1 will not be available in the website for this laptop. Hence, some of the features on the laptop might not work after changing the OS.  1: Since you have already created the USB recovery media from the laptop, you do not have to copy anything else other than this.  Make sure you you backup all files before installing the OS, as it will remove all data from the laptop. I see that, you have the unused Pro retail key for the OS, hence, you do not have to have the OEM product key. You need to use the product key for Windows 8.1 Pro to activate it, not the Acer OEM product key.  In the BIOS, select BOOT tab.  Select BOOT MODE as Legacy Mode instead of UEFI.Disable Secure Boot. Under Boot Priority Order, you need to select 1 as CD/DVD (if you are using disc), or USB FDD or USB HDD (if you are using USB drive) to install Windows 8.1 Pro.  Then press the F10 key and select "Yes" to save the changes in BIOS.  ->You an install Windows 8.1 Pro using my ISO and installing the drivers from the Acer support website. As said before, there may driver conflicts.  -> If you want to switch back to Windows 8.1, you may use the USB reovery drive (which created you have created from the recovery partition). When you do this, the Windows 8.1 Pro and it's product key will be removed from the laptop and the factory shipped OS, drivers, apps (and the OEM product key) will be installed automatically. You do not have to use the Windows 8.1 Pro key with Acer OEM USB reovery media.  -> You need to do a clean install using the USB recovery drive to install factory shipped Windows on the laptop.  

  • Blu Ray optical drive on Acer Aspire V15 Nitro ?

    Which Acer Aspire V15 Nitro laptops are able to run Blu Ray?

    paauxusa,
    Here's the Nitro notebooks that have BluRay players I can see:
    VN7-791G-70XG
    VN7-791G-7939
    VN7-791G-71P5
    VN7-791G-78VY
    VN7-791G-78VM
    VN7-791G-50ZA
    VN7-791G-77LV
    VN7-791G-76LH
    VN7-791G-75MV
    VN7-791G-73ZL
    VN7-791G-76GA
    VN7-791G-78X5

  • Can I upgrade my battery life using the Acer Aspire V Nitro VN7-951 in built battery?

    I am using the aspire V Nito-black edition 15.6 inch laptop for school and gaming. It currently lasts up to 2 and a half hours though I need it at atleast 5 hours. The battery is in built though but I really need the upgrade, cost does not matter.

     Changing the Operating System may cause driver conflicts. The compatible drivers for Windows 8.1 will not be available in the website for this laptop. Hence, some of the features on the laptop might not work after changing the OS.  1: Since you have already created the USB recovery media from the laptop, you do not have to copy anything else other than this.  Make sure you you backup all files before installing the OS, as it will remove all data from the laptop. I see that, you have the unused Pro retail key for the OS, hence, you do not have to have the OEM product key. You need to use the product key for Windows 8.1 Pro to activate it, not the Acer OEM product key.  In the BIOS, select BOOT tab.  Select BOOT MODE as Legacy Mode instead of UEFI.Disable Secure Boot. Under Boot Priority Order, you need to select 1 as CD/DVD (if you are using disc), or USB FDD or USB HDD (if you are using USB drive) to install Windows 8.1 Pro.  Then press the F10 key and select "Yes" to save the changes in BIOS.  ->You an install Windows 8.1 Pro using my ISO and installing the drivers from the Acer support website. As said before, there may driver conflicts.  -> If you want to switch back to Windows 8.1, you may use the USB reovery drive (which created you have created from the recovery partition). When you do this, the Windows 8.1 Pro and it's product key will be removed from the laptop and the factory shipped OS, drivers, apps (and the OEM product key) will be installed automatically. You do not have to use the Windows 8.1 Pro key with Acer OEM USB reovery media.  -> You need to do a clean install using the USB recovery drive to install factory shipped Windows on the laptop.  

  • Aspire V15 Nitro (VN7-591G-51CY) WiFi Problems?

    If you are having wireless issues I would suggest calling Acer Technical Support and see about having the unit brought in for service for testing to make sure there isn't a hardware issue. Here is the contact number for France, since someone posted they were having issues in France.
    France
    SAV Acer Group
    Quai 12 / 13
    299 Avenue Patton
    49006 Angers
    Tel : +33(0)969320342
    Fax: +33(0)148635344

    Hello,I would like to buy the Aspire V15 Nitro Black Edition (VN7-591G-51CY) with Intel I5, nVidia GTX860M and 8GB RAM. But as I read, some people have problems with WiFi connection. I mean they are being disconnected or the speed is extremely low. Does anyone here have the same problems? Does exist an option, how  to fix this issue? What are your other experiences with this notebook? I am now not sure, if buying this notebook is a right decision, because of this issue (I use WiFi at home, we have many devices using WiFi...).
    Thank you,Fraosius (I am sorry, if I made some English mistakes, I am from Czech Republic )

  • Cannot adjust the screen brightnes on V15 Nitro Black edition

    I have Acer Aspire V15 Nitro, and I cannot adjust the screen brightness with the <Fn>+<Left> or <Fn>+<Right> key anymore. Not even in power options. Like it's somehow locked at one brightnes position. Doesn't change when it's on battery regardless of what's being specified in power options... Any ideas? Thanks

    Try to re-install Launch manager:http://global-download.acer.com/GDFiles/Application/LaunchManager/LaunchManager_Acer_8.00.8111_W81x64_A.zip?acerid=635568872780789620&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%20VN7-791G&OS=ALL&LC=en&BC=ACER&SC=PA_6

  • Hi, I have Photoshop CS 6 Extended, but my laptop does not have a disk tray (acer aspire v5-573g) and I have the serial number, is there any way I can download this version of Photoshop I'm not sure what to do...

    Hi, I have Photoshop CS 6 Extended, but my laptop does not have a disk tray (acer aspire v5-573g) and I have the serial number, is there any way I can download this version of Photoshop I'm not sure what to do...

    You can download photoshop cs6 from here:
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • I have an Acer Aspire 7741. I want to disable the CAPS LOCK ICON. It interferes with my work.

    I have an Acer Aspire 7741.  I want to disable the CAPS LOCK ICON because it interferes with my work.  Microsoft states this is a  utility that is on the computer, not something that is controlled by Windows software.  Help, please.  This is the only computer I use that does this and it's quite annoying at times.

    it must already be installed on your system, normally it enables the Fn+F functions and over things like Caps lock. http://global-download.acer.com/GDFiles/Application/LaunchManager/LaunchManager_Dritek_4.0.5_W7x86W7x64_A.zip?acerid=634061190269930459&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%207741&OS=ALL&LC=en&BC=ACER&SC=PA_6

  • [HOWTO] Installing Arch Linux stable release on Acer Aspire One 522

    [This is a work on progress and my first howto ever]
    These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
    As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
    This Howto borns with the intention to address this problem.
    You need to be familiarized with Linux internals to follow this howto.
    (Expect this howto to become useless with new stable releases of ArchLinux.)
    Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
    I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
    Just boot with systemrescuecd
    Mount your external harddisk on /mnt/floppy for example
    Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
    This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
    Result image was about 22GB size
    This image will restore partition table, boot sector and all data if things go wrong.
    I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
    If you have some Gentoo Linux experience you will find those steps really familiar.
    You will need 2 USB pendrives or similar storage options.
    One is needed to boot into your netbook, and the other to store our custom archlinux build.
    Making an updated ArchLinux system
    1) Make a local dir on your existing linux system
    # mkdir ./newarch
    2) Install pacman database on it
    # pacman -Sy -r ./newarch
    3) Install base system
    # pacman -S base -r ./newarch
    4) Let's chroot inside
    # cp /etc/resolv.conf ./newarch/etc/
    # cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
    # mount -t proc proc ./newarch/proc
    # mount -t sysfs sys ./newarch/sys
    # mount -o bind /dev ./newarch/dev
    # chroot ./newarch /bin/bash
    5) Edit configuration files
    # nano -w /etc/rc.conf
    # nano -w /etc/hosts
    # nano -w /etc/mkinitcpio.conf
    Forget /etc/fstab for now since you don't know what partitions to use yet
    6) Generate kernel image
    # mkinitcpio -p kernel26
    7) Generate locales
    # nano -w /etc/locale.gen
    # locale-gen
    8) Make a tarball with our custom ArchLinux
    # exit
    # umount ./newarch/proc
    # umount ./newarch/dev
    # umount ./newarch/sys
    # tar -cvpf newarch.tar ./newarch
    9) Copy this tarball to an USB pendrive or external harddisk
    10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
    You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
    To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
    Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
    You should be booting into SystemRescueCD without any problem.
    After initialization you will end in a root prompt.
    11) Let's partition the disk
    You will find 3 partitions if this is your first time:
    /dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
    /dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
    /dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
    My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
    You have plenty of space with sda3, about 230G.
    So run fdisk/cfdisk and delete /dev/sda3
    Now create a 100M partition for boot
    Now create a Extended partition with all the space left
    Now create a 1GB logical partition for swap
    Now create a 10-15 GB  logical partition for root system
    And finally a logical partition for our home partition with all space left
    Your partition table should look like this:
    /dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
    /dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
    /dev/sda3 29566976 29771775 102400 83 Linux
    /dev/sda4 29771776 488397167 229312696 5 Extended
    /dev/sda5 29773824 31821823 1024000 83 Linux
    /dev/sda6 31823872 63281151 15728640 83 Linux
    /dev/sda7 63283200 488397167 212556984 83 Linux
    12) Create filesystems
    I choosed ext2 for boot, and reiserfs for root and home partitions.
    # mke2fs /dev/sda3
    # mkreiserfs /dev/sda6
    # mkreiserfs /dev/sda7
    # mkswap /dev/sda5
    13) Mount partitions
    # mkdir arch
    # mount /dev/sda6 arch
    # mkdir arch/boot
    # mount /dev/sda3 arch/boot
    # mkdir arch/home
    # mount /dev/sda7 arch/home
    14) Copy our custom ArchLinux build on it
    # mount /dev/sdb1 /mnt/floppy (for example)
    # cd arch
    # tar -xvpf /mnt/flopy/newarch.tar
    15) Configure /etc/fstab
    Mine is as follows:
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    /dev/sda3 /boot ext2 defaults 0 1
    /dev/sda6 / reiserfs defaults 0 1
    /dev/sda7 /home reiserfs defaults 0 1
    /dev/sda5 swap swap defaults 0 0
    16) Chroot in your new system
    # mount -t proc proc ./proc
    # mount -t sysfs sys ./sys
    # mount -o bind /dev ./dev
    # chroot ./ /bin/bash
    17) Install grub
    # grub-install
    Edit /boot/grub/menu.lst to suit your needs
    Mine looks like this:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    title Arch Linux
    root (hd0,2)
    kernel /vmlinuz26 root=/dev/sda6 ro
    initrd /kernel26.img
    title Arch Linux Fallback
    root (hd0,2)
    kernel /vmlinuz26 root=/dev/sda6 ro
    initrd /kernel26-fallback.img
    title Windows 7 Recovery
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    As you see, you can restore Windows 7 Starter from Grub.
    18) Change root password
    # passwd
    19) Add a regular  user account
    # useradd -G video,audio,users -m username
    # passwd username
    20) You're done!
    # exit
    # cd ..
    # umount ./arch/proc
    # umount ./arch/dev
    # umount ./arch/sys
    # umount ./arch/boot
    # umount ./arch/
    # reboot
    Remove the usb stick from your netbook.
    If all went ok, you will be inside your new stable and updated ArchLinux system
    Next post is reserved for software configurations specific to the Acer Aspire One 522
    Last edited by tigrezno (2011-04-20 12:22:38)

    Using acpid to achieve the following:
    - Change screen brightness when operating in battery mode
    - Power off when the power button is pressed
    - Suspend when the lid is down
    - Reduce CPU frequency speed to maximize battery usage
    Remember that system suspend is only supported by ati free driver xf86-video-ati
    1) Install acpid daemon and cpufrequtils
    # pacman -S apcid cpufrequtils
    2) edit acpid handler script
    # nano -w /etc/acpi/handler.sh
    Change the following section:
    ac_adapter)
    case "$2" in
    AC)
    case "$4" in
    00000000)
    echo -n $minspeed >$setspeed
    #/etc/laptop-mode/laptop-mode start
    00000001)
    echo -n $maxspeed >$setspeed
    #/etc/laptop-mode/laptop-mode stop
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    for:
    ac_adapter)
    case "$2" in
    ACAD)
    case "$4" in
    00000000)
    echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
    cpufreq-set -c 0 -f 800Mhz
    cpufreq-set -c 1 -f 800Mhz
    00000001)
    echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
    cpufreq-set -c 0 -f 1000Mhz
    cpufreq-set -c 1 -f 1000Mhz
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    Make sure you changed AC) for ACAD)
    Now change this other section:
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF) logger "PowerButton pressed: $2" ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    with:
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF) poweroff ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    Change:
    button/lid)
    #echo "LID switched!">/dev/tty5
    logger "ACPI group/action undefined: $1 / $2"
    for:
    button/lid)
    pm-suspend && /etc/rc.d/network restart
    logger "ACPI group/action undefined: $1 / $2"
    Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
    3) Start acpid and load modules
    # modprobe powernow-k8
    # /etc/rc.d/acpid start
    Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
    Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
    Stopping system freezes due to ethernet driver
    The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
    To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
    MODULES=(!ath9k !atl1c)
    Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
    Correctly starting wireless at boot
    I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
    To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
    wi_up()
    eval iwcfg="\$wlan_${1}"
    [[ ! $iwcfg ]] && return 0
    /usr/sbin/iwconfig $iwcfg
    [[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
    sleep $WIRELESS_TIMEOUT
    /usr/sbin/iwconfig $iwcfg
    bssid=$(iwgetid $1 -ra)
    It will do the trick and will start at boot correctly. This is not a solution but a fix.
    Adjust Touchpad to disable false taps
    What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
    This means you can write and press space without having the cursor click out of the window and such.
    # synclient AreaLeftEdge=150
    # synclient AreaRightEdge=1300
    # synclient AreaTopEdge=300
    Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    Option "AreaTopEdge" "300"
    Option "AreaLeftEdge" "150"
    Option "AreaRightEdge" "1300"
    EndSection
    You can play with those values. They just work for me.
    Last edited by tigrezno (2011-04-23 13:49:48)

  • [SOLVED] Questions on Acer Aspire One netbook resolution

    I've been digging through the wiki and googling everything, but I just can't figure out how to get the dang resolution right!
    I've got an Acer Aspire One (D257, model ZE6) and technically, it should be 1024 x 600. Everything seems like it's the right size, but it's just slightly blurry and looking at it makes me a bit dizzy, like it's just slightly off. I've read that the Acer netbooks are SIZED to 1024x600 but use the RESOLUTION of 1024x768. Could anyone confirm this? Am I way off base?
    The wiki suggests using xrandr to change the resolution, but I get the BADMATCH error. The solutions I googled mostly involve editing an xorg.conf, which doesn't exist. Trying to generate it myself always fails (xorg -configure, which always leads to "number of created screens does not match number of detected devices").
    Maybe I've just missed something really obvious... But I can't seem to find it.
    Last edited by DevPug (2013-07-27 17:41:41)

    WonderWoofy wrote:There is the kernel driver, which is the i915 module from the kernel, and then there is the Xorg driver, which is provided by the xf86-video-intel package.  Do you have both?
    OH MY GOD. I followed the wiki to a T, but when I double-checked, I didn't have i915 listed in the MODULES="" line. So I must have not saved it, in my hurry to get everything going. My desktop looked okay-ish, but my web browser was resizing text improperly, hence the 'dizzy' effect.
    Thank you from the bottom of my heart for catching my silly oversight!
    Gusar wrote:I wouldn't say "crappy display", I'd say you don't like the default anti-aliasing.
    This is also true, though... My next task is to find better anti-aliasing that I can get along with. The default just isn't cutting it, now that I can see it clearly.
    Last edited by DevPug (2013-07-27 17:57:58)

  • Wifi unstable and extremely slow on my Aspire V Nitro VN7-591G-7.

    Hi again ! My previous problem is now solved. But now I have issues with my wifi. The wifi works perfectly on other devices but on my Aspire V Nitro VN7-591G-7, it's just impossible to do anything on the internet... I've read it's a common problem and there are solutions. What steps should I follow in order to solve this ? I'm running Windows 8.1 by the way. I really like the performances of this computer so I wish to get rid of this stupid problem ! Thank you very much.

    Can you describe "unstable and extremely slow" in more detail. Are you connected to the 5 GHz band of your wireless router or are you connected to the 2.4 GHz band? Are you having problems with all websites or just a few? Which web browser are you using?  IE or chrome or firefox? What is the model # of your wireless router? Is your wireless router supplied by your ISP? Or did you buy it retail? What BIOS version is currently installed on you laptop? What BIOS version is designated as the latest version on Acer's website? Does the problem occur when you use other people's wifi such as a friend, relative or neighbor?  Have you tested it somewhere besides your home? Does Acer's website list an updated wireless driver for your computer? http://us.acer.com/ac/en/US/content/drivers

  • Not starting - for Android - as supplied with Acer Aspire One D255

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/886204''
    Download'''bold text''' Not starting - for Android - as supplied with Acer Aspire One D255

    Many thanks for a reply. It's good to get some feedback at least. I must admit I won't be too concerned if it's not compatible as I've since migrated to more useful tablet devices. This thing was always a bit of a mistake, especially with the annoyingly useless android bolt on. But as I use it for the occasional larger screen benefit and printer link, it would be good to have the benefit of latest MS. It still raises the question of why Acer at least can't provide a definitive list. After all there must be many other idiots like me that bought one? Thanks again
    [subject line edited to reflect new topic]

  • Xorg.conf Acer Aspire 3000 xinerama [request][SOLVED]

    Anyone having an acer aspire 3000 laptop with xinerama working?
    Or anyone with a "sis" driver laptop with xinerama?
    I would be very very grateful if someone could post a working xorg.conf file with xinerama working for any of the above setups.
    Been struggling all night with this and can't get it to work.
    Or does anyone know of any tutorial that works to get xinerama up and running?
    Ask2

    This xorg.conf works. Acer Aspire 3000
    Xinerama works nicely except its very very slow and locks up computer during some screen events, like moving a terminal and stuff.
    Section "Files"
        RgbPath      "/usr/share/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/100dpi"
        FontPath     "/usr/share/fonts/TTF"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/75dpi"
    EndSection
    Section "Module"
       Load  "ddc"  # ddc probing of monitor
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
       Load  "bitmap" # bitmap-fonts
        Load  "type1"
        Load  "freetype"
        Load  "record"
    EndSection
    Section "InputDevice"
        Identifier  "Keyboard1"
        Driver      "keyboard"
       Option      "CoreKeyboard"
        Option "XkbRules" "xorg"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "se"
    EndSection
    Section "InputDevice"
        Identifier  "PS/2 Mouse"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option          "ZAxisMapping"          "4 5"
        Option      "Device" "/dev/psaux"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option        "SendCoreEvents"  "true"
    EndSection
    Section "InputDevice"
            Identifier      "USB Mouse"
            Driver          "mouse"
            Option          "Device"                "/dev/input/mice"
            Option          "Protocol"              "IMPS/2"
            Option          "ZAxisMapping"          "4 5"
            Option          "Buttons"               "5"
    EndSection
    Section "Extensions"
        Option "Composite" "true"
    EndSection
    Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"
    EndSection
    Section "Device"
       Identifier  "Videocard0"
       Driver      "sis"
       BusID       "PCI:01:00:0"
       Screen      0
       Option      "DDC"             "0"
       Option      "VBERestore"      "0"
       Option      "UseFBDev"        "true"
    EndSection
    Section "Device"
       Identifier  "Videocard1"
       Driver      "sis"
       BusID       "PCI:01:00:0"
       Screen      1
       Option      "DDC"             "0"
       Option      "VBERestore"      "0"
       Option      "UseFBDev"        "true"
    EndSection
    Section "Monitor"
       Identifier  "Laptop LCD"
       Option      "DPMS"
       HorizSync   28-96
       VertRefresh 50-75
    EndSection
    Section "Monitor"
       Identifier  "Desktop LCD"
       Option      "DPMS"
       HorizSync   28-96
       VertRefresh 50-75
    EndSection
    Section "Screen"
       Identifier     "Screen0"
       Device         "Videocard0"
       Monitor        "Laptop LCD"
       DefaultDepth   24
       SubSection "Display"
          Depth       24
          Modes       "1024x768"
       EndSubSection
    EndSection
    Section "Screen"
       Identifier     "Screen1"
       Device         "Videocard1"
       Monitor        "Desktop LCD"
       DefaultDepth   24
       SubSection "Display"
          Depth       24
          Modes       "1280x1024"
       EndSubSection
    EndSection
    Section "ServerLayout"
       Identifier           "DefaultLayout"
       Screen               0  "Screen0"
       Screen               1  "Screen1"   LeftOf   "Screen0"
       InputDevice          "Keyboard0"
       InputDevice          "PS/2 Mouse"
       Option               "Xinerama"
       #Option               "Clone"  "Off"
    EndSection
    Section "DRI"
        Mode 0666
    EndSection

Maybe you are looking for

  • Schedule lines and hierarchy

    Hi, Can somebody please explain me what are these schedule lines and schedule hierarchy in PSP_SCHEDULE_LINES and PSP_SCHEDULE_HIERARCHY tables. Thanks --pavan                                                                                           

  • One Step DVD stops at 30 mins on 60 min project...help please?

    Hi..I'm at wits end. Altho nothing,not even an error message appears on my screen, my One Step DVD burn stops at 30 mins on my 60 min project. It looks,however, as if it is continuing to burn! It's only after the fact when I try to play it that I fin

  • Adobe Reader XI - Save button not enabled in Firefox 19, 20, 21

    This problem only seems to occur in Firefox. IE9 and Chrome 20+ seem to behave properly. We have customers complaining that they are having a difficult time figuring out how to save PDF files from our scientific research web application. While, cntrl

  • Lumia 1320 screen flickers.

    I have a Lumia 1320 and I've noticed a slight flicker on the screen. The flicker occurs only when the screen's brightness is low, no matter what I'm doing on the phone. It flickers even on glance screen. After some research online, I found that other

  • Query for required out put as mention below in SQL

    HAI.. all I HAVE A TABLES LIKE SQL> SELECT *FROM A; PCK PN 1 BIKES 2 COMPONENTS SQL> SELECT *FROM B; PSC PCK SBNAME 1 1 RASEBAIKE 2 1 SPEEDBIKE 3 2 MOTHERBORD 4 2 HARDIDSK 5 1 SPORTSBIKE 6 2 RAM SQL> SELECT PN,SBNAME,COUNT(*) FROM A,B WHERE A.PCK=B.P