Acer Laptop stuck at "Setup is Starting Services," can't move on AT ALL!

Hi! I've been having a serious issue with my Acer Aspire (Windows 7) laptop since around 3am last night. Before I go on, please note that I have been searching for solutions before posting this question, and none of what I've found matches my situation and/or
solves the issue.
SHORT VERSION:
Issues:
-"Windows could not complete the installation. To install windows on this computer, restart the installation" error window keeps showing up, forcing me to click OK, and restart (causing same error over and over)
-After the above error, and another attempt to restore, this error shows "The computer restarted unexpectedly or encountered an unexpected error. Windows Installation cannot proceed. To install windows, click OK to restart the computer and then the
installation."
-can't access login screen after continues restarts
-AtBroker.exe and Explorer.exe not running (and probably other important .exe as well?)
-None of the Safe Modes are accessible
What I've done so far:
-begin restore process (not factory default! the process included backing up my files)
-continuous restart and encounter "Windows could not complete the installation. To install windows on this computer, restart the installation."
-F8 to start the "Last known good configuration," just led me back to the current issue.
-F8 to boot in Directory Services Restore Mode, went back to trying to install in Safe Mode, forced me to restart.
-F8 to disable automatic restart (failed and made me restart anyway)
-F8 to "Disable Driver Signature Enforcement"... also failed
NOTHING I've done has made any advancement past the "Setup is starting services."
LONG VERSION
Last night, I was installing a new theme on my laptop (from a 3rd party on deviantart, but I was carefully following instructions to not mess anything up, using theme manager. however it's probably the reason for the issue) and everything was going well.
i had to restart occasionally to make sure the themes worked but on my final restart (after I decided I preferred a previous theme), everything went wrong! After logging in, the screen turned gray (it'd probably be black for others, but mine was gray maybe
due to the theme) and the cursor was there just flickering. And this continued for about 10 minutes before I tried opening task manager but that failed (said the .exe wouldn't start properly) so I shut it down (through ctrl+alt+del) and restarted.
Still same issue, but this time it said that AtBroker.exe and then explorer.exe were unable to run properly, preventing me from even seeing my desktop.
So today when I got home, I ended up going through the Acer eRecovery Management and doing a system restore (but it would keep my files, just restore the settings to how they were when my parents bought the laptop (summer-ish 2011)). It took a while and
it looked promising. Eventually, it took me to the screen with the Windows logo, then to a screen that said "setup is starting services"). And it gave me an error that it couldn't continue installation so it had to restart, so I clicked OK. It happened
again. Clicked OK and repeated that 2 more times until I got fed up. I just want to skip around that installation and try to access my desktop or at least Command Prompt but it won't let me get any further without making me restart (by clicking OK). I also
do not recall any disk when my dad set my laptop up but this was 2 years ago. I can't find one either, so I assumed Windows 7 came with it?
I really don't know what to do! Nor am I really tech savvy when it comes to fixing this kind of computer problem, so if anyone has any solutions, I wouldn't really know a lot of terms that would be important to know when it comes to fixing this issue. Hopefully,
someone can explain what's happening and how I can fix it fairly simply.
Thanks!
Olivia

Hi Olivia,
Thanks for your structured and logical description.
It sounds really serious. According to my understanding, you can't start your computer normally.
Please refer to this article:
Windows Setup Hangs When "Setup Is Starting Windows" Screen Appears
http://support.microsoft.com/kb/217073
If the issue still persists, we suggest you use installation DVD to do clean install.
Installing and reinstalling Windows 7
http://windows.microsoft.com/en-in/windows7/installing-and-reinstalling-windows-7
Note: please remember to backup your personal data and files
Best regards,
Karen Hu
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Windows 8 install stuck at "setup at starting"

I boot windows 8 from usb last month,,but it wont read from dvd, so i decided borrow my friend's win8 bootable...
but it stuck at purple screen and "Setup is starting" message..
somebody please help me,,,because winxp isnt supported anymore to download executable files...
Help me!
ps
-I speak Indonesian too.

Hey Muhamad,
Contact your computer manufacture to inquire about an updated Basic Input/Output System (BIOS).
Modify your computer's BIOS the following ways:
Change the Plug and Play settings. For example, if Plug and Play functionality is currently being controlled by the BIOS, change it so it is controlled by the operating system.
Enable or disable Universal Serial Bus (USB) support.
Disable power management support.
Disable infrared support.
Disable all serial ports.
Remove non-essential hardware devices one at a time. This includes a second video adapter, Small Computer System Interface (SCSI) adapters, modems, sound cards, network adapters, and other non-essential
Industry Standard Architecture (ISA) adapters, Peripheral Component Interconnect (PCI) adapters, and PC Cards.
Disconnect non-essential external devices and cables, such as backup devices, external hard disk drives, printers, and scanners.
If you are using a notebook computer, verify that it is not currently in a docking station.
Specify a different computer type when you start your computer.
http://support.microsoft.com/kb/217073
you can see it and more from this url:
http://social.technet.microsoft.com/Forums/windows/en-US/2dc4b5d3-8dc3-4e23-9ef9-56e534aae426/windows-7-installation-stuck-on-setup-is-starting?forum=w7itprogeneral
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Stuck on "Setup is starting windows"

Been at this for 3 days, no one at Apple support has encountered my problem, and haven't found a solution anywhere on the net. Here is the scenario:
Computer is a new iMac 20" 2.66 GHz Intel Core 2 Duo, with 4GB RAM, and using the included Boot Camp Assistant 2.0 that cam pre-installed.
After running Boot Camp, I chose to partition 32GB for the Windows installation. I have tried with 2 original personally purchased Microsoft authentic CDs (Microsoft just sent me the SP3 a few days ago). One is a new Windows XP Home Edition OEM Service Pack 3, the other is the same but Service Pack 2. Once Boot Camp prompts to insert the CD and I click to install, the iMac restarts, and I get the Windows Setup blue screen. Along the bottom I see how it starts loading all the preliminary drivers needed for installation, and then... and then.... "Setup is starting Windows" across the bottom white strip, and that's the end of it. I hear the CD stop spinning after 30 seconds, and nothing ever happens after that. No next screen to choose which partition to format or anything.
Both discs are in perfect conditions, no scratches or smudges or dirt. I tried using the newer SP3 disc on an older PC I have to see if it would reformat and re-install Windows on it and it worked perfectly. I didn't authenticate it since it will be probably scrapped later anyhow. So the disc works fine. A tech at Apple phone support advised me to try unplugging everything except the keyboard and mouse, that didn't work either.
I'm exhausted, and really have tried all my previous tech experience at no avail. Any kind sould who can actually respond with a workable solution will be greatly appreciated.
In God's Harmony,
RODDY

SOLVED
Well, I'd like to thank all of you for your input. After much prayer and extensive search, I was finally able to install Windows XP SP3 on the new iMac. I kept the 32GB partition created by Boot Camp 2.0, but I did 2 things differently when trying to do it this time. The apple keyboard (since it is so short, really Apple, you had a usable length with the Pro models 10 years ago) was connected to a 6 foot USB extension cable to reach the back of the monitor. This is because the iMac is on a computer desk with a pull-out desk to place the keyboard and mouse. But I disconnected the extension, and plugged it direct this time. I didn't leave the Windows XP SP3 disc in this time, I just restarted, and while it restarted I pressed and held the OPTION key. An icon of just the "Macintosh HD" came up on the screen, at which time I inserted the Windows CD, a few seconds later, an icon for the CD appeared to the right of the Mac HD icon. I selected the CD, and again it went through loading drivers getting ready for windows setup, same as before. I cried out to the Lord, and YESSSSSSSSS, it finally asked me if I wanted to format a windows partition! Needless to say, it went through the entire process fine.
I didn't need to update to Boot Camp 2.1, sp3 is working fine. Installed and ran a few programs, connected to the internet, and so forth. Although I left the network connection to the internet disabled, don't want to use the Windows side for the net, too many virus problems possible.
I shut down the computer, re-connected the USB extension cable, and when I went into the Windows side, guess what? The mouse and keyboard locked up completely. I connected the apple keyboard direct again, and then I had control again. Using the USB extension cable on the Windows side is the only problem, because the Mac side works fine with it. This will be a new post because I really need the extra length because of the distance. But thanks to all.
In God's Harmony,
RODDY

Windows 7 Install is stuck at "Setup is Starting"

Hi,
I am attempting to install windows 7 x64 onto my pc and it hangs at the "Setup is Starting..." screen. I waited for the screen to go away overnight but to no avail.
My system's specs are:
Phenom II x3 720 be
MSI 790GX-G65 Motherboard with integrated video and the latest bios
2 Gigs of ram (going to expand to 6)
640 gig Seagate sata hard drive in IDE mode
firewire and integrated audio have been disabled
usb enabled but usb compatibility mode disabled
no floppy drive and it has been disabled
onboard lan has been disabled
There was an instance where the installation got past that screen and asked me to choose a drive to install but none were selectable. I used seagates utility to set up the drive with ntfs but that didn't solve the issue. Is there anything else that I should try?

Which DVD ROM are you using, also check the following thread where the installation process was very slow and
some changes in the BIOS related to HyperTransport solved the problem.
Your being the new Phenom II cpu, cannot say if this option is there in bios or not, just give it a try....
http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/2aec8bd7-c05d-4de0-a31a-92458c8c3bf7
And you sure that the installation media is good.

Windows 7 Install Stuck at Setup is Starting.

First I had an issue with the installer sitting at blank picturesque background for about 30 minutes. Then I finally got the first dialog box asking me for the language, etc. I did all that and now the installer is hung at the Setup is Starting screen, with the cursor going, my HDD indicator going, but nothing, for a little over an hour. Anyone have any ideas?
Not sure what kind of info might help, I'm trying to dual boot Win7 x64 on another partition, with WinXP x32 as my main system OS.

Hi,
Do you have a floppy drive? If not, please disable any setting related to floppy in BIOS. Based on my known, floppy setting may cause similar issue.
Hope it helps.

System hanging on setup is starting service....

Dear Friends,
I have a new Fujitsu Desktop pc, Model No is Esprimo P400 E85+. When the open
windows 7 on this computer will come a error message like this " This computer restarted unexpectedly or encountered an expected error. Windows installation cannot proceed. To install windows, click OK to restart the computer, and then restart the installation
". and keyboard and mouse also not working that time. That why I cannot access shift+ f10 or registry edit... How can I fix this problem without format Because inside recovery partition . Please help me... I am waiting for your replay
Advanced thanks for your reply
Thanks

Hi,
Did you perofrm a factory reset with the recovery partition? According to your description, the system hangs during the installation, and the keyboard\mouse both malfunction, in this situation, I'm afraid that we need to power off the machine and re-do
the setup. Unplug all external device except keyboard\mouse. By the way, what is the reason that you want to use recovery partition, as
arnavsharma mentioned already, when a system is malfunction, before using the recovery partition, have you tried other recovery options in recovery console, such as Last known good config\startup repair\system restore ? Any result?
http://windows.microsoft.com/en-hk/windows/advanced-startup-options-including-safe-mode#1TC=windows-7
Yolanda Zhu
TechNet Community Support

I've backed up, download 7.0.4, and restored my iPad 2, but it is "stuck" in "setup" mode. How do I move on to using the iPad?

I've added iOS 7.04 to my iPad, having backed up to iTunes, and have also restored it from iTunes. But, the iPad is stuck in "set up" mode since restoring and doesn't allow me to move on to using the iPad. How do I move on from "set up"?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

I have had my mac-book pro for almost a year, and have just got OSX Mavericks, and now the sound on my laptop is working in a sporadic way, can I change this at all on system preferences or will I have to get it repaired?

On my mac-book pro the sound isnt working after I have installed OSX Mavericks, should I take it to be repaired, or can I do something on System Preferences?

In addition to checking system preferences/sound/output and selecting built in if that does not work, make sure volume is up and mute not checked.
You can try the following, Take a set of headphones and plug theim in and out several times (there is a micro switch that sometimes gets stuck)
Go to applications>utilities>Audio MIDI set up, see if you can select built in there, make sure volume is uo mute not checked.
Try a NVRAM/PRAM reset:
Power off, power back on holding the following keys OPTION + COMMAND + P + R
Continue to hold these keys till you hear the start chime 2 times, then release,reboot

I have a dell desktop computer and i have itunes but all of my music is from cd's i own and i'm thinking about buying a laptop if i do the home sharing can i move all my music from my desktop computer to the laptop?

i have a desktop computer and have itunes and all of my music is from cd's and i want to buy a laptop if i do home sharing will all of my music on my desktop computer be on my laptop

Copy the ENTIRE iTunes folder from the old computer to the new computer. Home Sharing is rife with problems when transferring media.

How can i move lightroom with all my files onto another laptop?

and i don't want to lose any of my files?

This should help: How do I move Lightroom to a new computer? | The Lightroom Queen

My Sony BDV-n9200wl home system is stuck on setup screen?

My Sony BDV-n9200wl is stuck on setup screen? I can't do anything with it? It is like it has frozen. A message does come up about updated software available and to update it but I can't cause I can't get passed the setup screen! I have hardly used it, may 6 times at most! I was told to try changing the batteries in my remote but this made no difference

Hello Kerry-h, thank you for your message. Welcome to SONY Community!
The home theater system (HTS) will stop responding duing the system software (firmware) update if the BD/DVD function was not set before starting the update. Follow these steps if the HTS has stopped responding after trying to perform a system software (firmware) update using the Network update feature.
Unplug the HTS from AC power. Plug it back in and turn it on.
Press the BD/DVD function button.
Re-attempt the Network Update process.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hopefully this post helps you.

Itunes updated today and then ceased to function. I have re-installed twice and am stuck at "starting services" "apple mobile device failed to start"

itunes updated today and then ceased to function. I have re-installed twice and am stuck at "starting services" "apple mobile device failed to start"

See Troubleshooting issues with iTunes for Windows updates.
tt2

User Profiles Synch Service starting failes after "ILM Configuration: Starting services"

Hello guys.
I tried to configure user profiles synchronization and it could not be started without any problems as expected :)
This time I got the following error in logs:
02.05.2013 10:54:03.34 OWSTIMER.EXE (0x17DC)
0x183C SharePoint Portal Server
User Profiles 9q1k
Medium ILM Configuration: Starting services.
0160471f-15fc-4d97-8227-05b86f4d0fc7
02.05.2013 10:54:33.52 OWSTIMER.EXE (0x17DC)
0x183C SharePoint Portal Server
User Profiles 9q15
High UserProfileApplication.SynchronizeMIIS: Failed to configure ILM, will attempt during next rerun. Exception: System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size
of the argument list. at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args) at System.String.Format(IFormatProvider provider, String format, Object[] args) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.IsStarted(ServiceController
controller) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.WaitUntilStarted() at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance
profileSyncInstance). 0160471f-15fc-4d97-8227-05b86f4d0fc7
02.05.2013 10:54:33.52 OWSTIMER.EXE (0x17DC)
0x183C SharePoint Portal Server
User Profiles 9i1u
Medium UserProfileApplication.SynchronizeMIIS: End setup for 'UserProfilesService'.
0160471f-15fc-4d97-8227-05b86f4d0fc7
So, what I have and what I've done:.
1) I have a test 2-servers farm installation (Database server + WFE/Application server); SQL Server 2008 R2 SP2, SHP 2010 SP1 + October 2012 CU; There are no any service applications except default ones(Security Token Service and Application Discovery
and Load Balancer Service Application) as well as there are no any services started except default :)
2) I created a site collection and manage path for MySites, created a new UPA and its proxy.
That's all. Now, if I try starting User Profiles Synchronization Service, it stucks on "starting" for about 10 mins and I see the error above in ULS. Hope you can somehow help me.
By the way, I don't want a both sides synchronization this time, I just need to check some stuff with People Search. Will "Read" rights for Managed Account in AD be enough to export profiles from AD? (I mean if I select my farm account as a synchronization
account, will it work?)
Thank's in advance!
Anton.
UPDATED
The problem probably was due to the lack of internet access. As Raymond
Diack said:
"the farm account needs internet access to do a CRL check to these sites:
crl.microsoft.com
ctldl.windowsupdate.com
ctldl.windowsupdate.nsatc.net
www.update.microsoft.com.nsatc.net "

Sure, here is the stack near the error without any filters:
11:13:11.88 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q1j Medium ILM Configuration: Opening firewall ports. 589d9196-6647-4432-9ab0-a389871310b7
11:13:12.13 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q1k Medium ILM Configuration: Starting services. 589d9196-6647-4432-9ab0-a389871310b7
11:13:12.36 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:80a1f95b-37a3-45f1-89a6-f33de57b678a'
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:80a1f95b-37a3-45f1-89a6-f33de57b678a' 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.38 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=4,01622273221876 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.75 OWSTIMER.EXE (0x0AA8) 0x16F0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job job-timer-locks) ea70e10e-4455-47ea-a3fd-e7cb0f0a9ce4
11:13:12.75 OWSTIMER.EXE (0x0AA8) 0x16F0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job job-timer-locks). Время выполнения=4,16512433842849 ea70e10e-4455-47ea-a3fd-e7cb0f0a9ce4
11:13:22.52 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:5b799d56-3784-48ff-beaf-6fb6bfeade78'
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:5b799d56-3784-48ff-beaf-6fb6bfeade78' 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=2,92432418086656 941bbfb5-84aa-411e-b310-74830120b860
11:13:26.78 OWSTIMER.EXE (0x0AA8) 0x0894 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish) 6044b3fe-8ca7-4f76-81b0-ea55e6795d5b
11:13:26.78 OWSTIMER.EXE (0x0AA8) 0x0894 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job SchedulingUnpublish). Время выполнения=2,56094000773841 6044b3fe-8ca7-4f76-81b0-ea55e6795d5b
11:13:32.66 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:f5648c05-71d7-443c-b12d-946eb36bcb3f'
11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:f5648c05-71d7-443c-b12d-946eb36bcb3f' 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.71 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.72 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=65,7127512016192 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:39.79 OWSTIMER.EXE (0x0AA8) 0x0500 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job SchedulingApproval) 69e34469-a502-4257-80f4-d8fb990f2bf7
11:13:39.80 OWSTIMER.EXE (0x0AA8) 0x0500 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job SchedulingApproval). Время выполнения=11,6191443325898 69e34469-a502-4257-80f4-d8fb990f2bf7
11:13:40.33 w3wp.exe (0x1364) 0x0E98 SharePoint Portal Server Runtime 8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/961767364/ROOT-1-130050376913614507)
11:13:42.88 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:23bdd02e-0716-4697-b55d-55862694ebe1'
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:23bdd02e-0716-4697-b55d-55862694ebe1' c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=2,88158131829604 c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q15 High UserProfileApplication.SynchronizeMIIS: Failed to configure ILM, will attempt during next rerun. Exception: System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list. at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args) at System.String.Format(IFormatProvider provider, String format, Object[] args) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.IsStarted(ServiceController controller) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.WaitUntilStarted() at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance). 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9i1u Medium UserProfileApplication.SynchronizeMIIS: End setup for 'UPS'. 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Topology 8xqz Medium Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 15232 Ensure: False, HashCode: 11248478, Id: c8e4ed56-ab72-4b99-8532-d282d3f26896, Stack: at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate() at Microsoft.SharePoint.Administration.SPJobDefinition.Update() at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.92 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Время выполнения=161321,353202712 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.96 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Topology 8dyx High Deleting the SPPersistedObject, ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. 589d9196-6647-4432-9ab0-a389871310b7

Systems Update 3.14 fails on starting services

Hello,
So I went to install the SU 3.14 in order to fix the problem that SU was not working (was told it was changed and I needed to install this). First time I install it I get an indication that there is a previous version that needs to be removed. OK but after this the install of the 3.14 goes about 70% of the way until it hits "restarting services" and dies (I get a generic msg that the install was interrupted and will not continue) and I have no option but to quit. Downloaded the file numerous times and it DOES install fine on several other Lenovo's T61's and T43's.
First tech tells me to remove and re-install all my .Net components. Done and still have problems.
Did a bit more digging around and I ran into a thread about the systemupdate service being turned off and when I looked mine was disabled. I changed it to auto and tried to start it and I got the error that the file the service was pointing to could not be found (suservice.exe). Searched my HD and I could not find any version of this.
Second tech tells me that my files were corrupted (yep told him about the multiple downloads and the fact that it runs just fine on other laptops) and after talking to a supervisor (and repeating my request for the best way to get this file back on my system) I was to download and run the Lenovo System Toolbox.
Downloaded and run and it doesn't find anything and it does not help me at all with my problem.
Third call to Tech and they pointed me to the 3.14 download so I've come nearly full circle. Support did not have the file I needed nor any way of getting it back so I copied it from another laptop and was able to start the service but the 3.14 install still dies. Exact error is:
InstallShield Wizard Completed
The wizard was interrupted before System Update could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard.
This happens right after you see the prompt "attempting to restart the services".
ANY help would be greatly appreciated! Thank you

shameless bump

Can i use this apple router on my Acer laptop

are apple routers for apple products only, or any pc?

Hello Steve, am posting from an Acer Aspire One running Windows 7 Starter. The AAO is connected to an Airport Extreme g standard. All my wireless devices connect flawlessly.
I did have one connection issue. I bought a MacBook Air on Black Friday and was unable to connect to my wireless. MBA was returned on Cyber Monday due to the connectivity issue. The MBA did connect in the Apple Store but dropped the connection several times during personal setup at the Apple Store.
When I returned the device it was suggested that I change ISPs and upgrade to the N standard. I did make the ISP switch but have not upgraded the router. I checked the Macbook Air forum and there seems to be some connectivity issue with the MBA for some users. I am on the sidelines for the MBA at this time.
Hope tht helps.

Acer Laptop stuck at "Setup is Starting Services," can't move on AT ALL!

Similar Messages

Maybe you are looking for