Acer LCD screen won't work with osx?

I've just bought an Acer H243H LCD screen, and when i plug it in via HDMI, I get a 'no signal' message... Granted, I should have checked for compatibility before buying it, but my macbook plugs into out LCD tv via HDMI with no worries... Acer don't provide an osx driver, so I'm wondering of theres a genius out there who can help me make this work... It's such a pretty monitor, it'd be a shame to throw it out... Your help would be much appreciated.
Jake

Try connecting to the DVI port instead of the HDMI port. The Acer may not have a plug-and-display driver behind its HDMI port.

Similar Messages

Upgraded to 2.0.1 and the top screen won't work with some of the apps

Ever since I upgraded to 2.0.1, when I open any of the applications the top part of the screen won't respond with some of the applications. I know that the screen is working and not damaged because on the main menu application prompt I can click into the apps on the top part of the screen, but as soon as I get inside some of the applications weather it be the ipod or texting the top part of the screen won't respond. Anyone else have this problem and have solution for the problem

I had a similar issue when I upgraded last night to 2.0.1...everything went fine no issues last night that I could see...though I didn't make a single call until this morning after doing the upgrade...went to call in to work this morning and couldn't hear them they couldn't hear me and there was no sound whatsoever...turns out that somehow the 2.0.1 update caused my iPhone to go into a staus where it though it had my headphones in all the time...this resolved by following the information on this support document ( http://support.apple.com/kb/TS1630?viewlocale=en_US ) finally was a reset of the iPhone (step #7) that seemed to resolve it for me...you might want to try this too.

Hyundai LCD monitor won't work with OS9

New Hyundai LCD monitor -dual input. Works fine with Windows XP, & with OS 10 but when I boot into OS9 the screen goes black, & the screen's menu button won't work. Have started os9 in safe mode but cannot find how to change the display/resolution/refresh settings. Where do I look to change these settings? And what settings should I try?

Have posted more on this in thread in "older hardware".
http://discussions.apple.com/thread.jspa?messageID=6115403#6115403. I hope this is the right link, thought I shouldn't duplicate postings.
Would very much welcome any more suggestions you might have
It's ATY rage 128 pro, VRAM 16MB
1024x768@60HZ, 32 bit colour

HP Scan 3 won't work with OSX 10.9.2

I have an HP Deskjet 3050A All-In-One and recently upgraded to a MacBook Pro with OSX 10.9.2 Printer will print but scanner will not, error message about "checking with developer for compatiblity with OS" upon attempting to open. Latest printer scanner software listed in Apple Support for Print/Scan is Version 2.3.1 which is what I have.
I have run softwre updates.
Anyone have a solution?
This question was solved.
View Solution.

Hi @RoscoeSweeny
There is no full feature software and driver available from HP, but the OS X v10.9 Mavericks driver for your printer is available through Apple Software Update (ASU).
With this driver you can still print and scan, you just wont have HP software to scan from. Scanning to the computer from the printer control panel is only available when using HP Scan software, thus it will not work because there is no HP scan software as apart of the Apple Software Update driver.
Instead, you can scan using,
Method one: Scan from the Print & Scan window
Method two: Scan from Apple Preview
Method three: Scan from Apple Image Capture
I hope this helps. If you have any additional questions are have any difficulty using any of these methods, please let me know what method you are trying and what the issue/error is. You may also find the following document helpful; OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Acrobat Standard 6 won't work with OSX Lion

I just downloaded OSX Lion and my Acrobat Standard 6 no longer works. What to do now? I hadn't upgraded along the way, so how can I know get an application to create pdf files on my Mac?

Acrobat 6 Standard or deluxe are PowerPC Programs. They've been runing in an emulation mode called Rosetta since OSX.6 OSX.7 Lion is pure Intel only. and Rosetta has been discontinued.
If you need PowerPC applications You are either going to have to revert back to Snow Leopard. Or buy you an external Drive install OSX 6 or lower on it and run your PowerPC apps from there.
You may discover many of the applications you depend upon if you haven't kept them upgraded have quit work as well. You can do about the same thing with standard in The Mac Directly. Standard didn't have Forms capability.
Just go to Print Menu click on PDF and choose desired PDF. I would suggest though If you seriously want to have PDF and Forms Capability to Upgrade to AcrobatX. There is so much more you can do with PDF's than with 6 Standard.

Clamshell mode won't work with OSX Lion

I am running a 2010 13" Macbook Pro and a Dell ST2410 23" external display. I have been using an HDMI to mini displayport cable with this setup for over a year without a problem. Now my monitor goes dark when I try to setup the MBP in clamshell mode. I even tried to lower the resolution on the monitor to see if that would remedy it, and it won't display anything. This problem first started when I upgraded to 10.6.8, and now is giving me problems in 10.7. Help!

assuming that you have an external monitor (you said 23"), usb kbd & mouse. How do you start it up?
I always opened the lid, hit the power and quickly closed before the chime would sound. Do you boot OS X up, then close the lid? Or do you do it as I do?
My PB is on 10.6.8 and never had any issues, besides running a little hotter..

New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
You can get 10.6.8 here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

My screen won't work the only time it does is when i enter in my passcode. what is wrong with it?

my screen won't work the only time it does is when i enter in my passcode. what is wrong with it?

Try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try connecting the iPod to your computer and restoring the iPod from backup via iTunes.
- If itunes does not see the iPod, see if placing the iPod in recovery mode will make it visible so you can restire it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

My screen has turned black as if the LCD screen isn't working. There is no damage and the phone is still responding to vibrations and there is a dial tone when called. What is wrong with my phone?

My screen has turned black as if the LCD screen isn't working. I have tried using the lockbutton and home button to turn it on, but it doesn't work. What should I do?

Your phone is probably broken.

Isight won't work in OSX, works in boot camp (XP SP3)

Hi everyone,
Within the last few weeks, my iSight camera stopped working. I went through every troubleshooting step recommended by Apple with no luck. I gave up hope and was ready to take it to the Apple store, but decided to see if it would work in windows... strangely enough it works great, but still won't work in OSX. I'd like to avoid taking it to the store, so any help is greatly appreciated!

Welcome to Discussions, bluejayDDS
... I'd like to avoid taking it to the store ...
You can the following three things (listed in order of increasing effort on your part) before seeking professional help:
(1) Apply the latest (10.5.7) Combo Updater using the following procedure:
• Backup all your important files.
• Use your Mac's Disk Utility to Repair disk permissions (different from repairing the "disk").
• Download and apply the Mac OS X 10.5.7 Combo Update.
http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
• Repair permissions again immediately following the restart that completes the install.
(Don't worry about corrections if Disk Utility reports that all repairs have been completed.)
• Launch only the OS X app you are trying to use with iSight and test to see if iSight works correctly.
Using the above process to apply the Combo Updater sometimes solves problems that occur after using your Mac's Software Update... to update Mac OS.
(2) If your problem still exists, reinstall OS X using the "Archive and Install" options explained here:
http://support.apple.com/kb/HT1710
Be certain that you have backed up all important files before you reinstall OS X.
(3) If your problem is not resolved by Archive and Install, you can completely Erase and Install all your Mac's software.
Erasing your iMac's hard disk and reinstalling all software as described in the Erase and Install section of http://support.apple.com/kb/HT1545 might correct a problem that remains after an Archive and Install.
Erase and Install is a lot of work, but sometimes it is the only way to get rid of something on the disk that is causing problems.
(4) If none of that works, see your Apple Service Technician for professional help.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Quark 7.5 won't launch with OSX Mavericks 10.9.1

QuarkXPress 7.5 won't launch with OSX Mavericks 10.9.1 I keep getting the window saying "QarkXPress quit unexpectedly" (see image below) and when I click on reopen, it does the same everytime. HELP!

Hi DCG,
hope oyu had a great christmas.
I posted the post you reference on June 11, 2013.
Since then a lot of things have happened. We released 9.5.4 several weeks ago, which seems to work fine for everybody under Mavericks.
We also posted an update for version 10 that makes it Mavericks compatible and afterwards released an update that fixes most issues reported.
So please try 10.0.2 or 9.5.4 on Mavericks, they should both work fine: http://www.quark.com/de/Support/Downloads/Search_Results.aspx?pid=1&oid=2&ftid=2
Thanks
Matthias

My iPod Video won't work with videos!

my ipod video (that i got for christmas) won't work with videos, tv shows, etc. with movies, it says it is loading for about 10 seconds and then it goes back to the menu. same with tv shows, but is completely black screen. help! i don't know what is going on and i really need my ipod to play videos.
Windows XP

Just want to thank you for this brilliant solution. It worked!! I also want you to know that I actually went into the apple store today, and none of the clerks had any idea how to fix this. That excludes the ''genius bar'' which had a five hour wait for appointments! Thank you so much again, merrymusic

Work with OSX 10.8.3 and can install elements anymore serial noth good

work with OSX 10.8.3 and can install elements anymore serial noth good

sorry Barbara i have no experience with this, no i think my version of elements needs a new activation
Op 3-apr.-2013, om 18:06 heeft "Barbara B." <[email protected]> het volgende geschreven:
Re: work with OSX 10.8.3 and can install elements anymore serial noth good
created by Barbara B. in Photoshop Elements - View the full discussion
What do you mean by "serial noth good"? Is PSE rejecting your serial number or telling you that you have too many activations or giving you the "licensing has stopped working" message?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5203018#5203018
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5203018#5203018
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5203018#5203018. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
Thanks!

You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8)

Icons at bottom of screen won't work

The icons at bottom of the screen won't work. I can slide them, but they won't tap for use.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Acer LCD screen won't work with osx?

Similar Messages

Maybe you are looking for