Acer Switch 10 lost password for super admin of Bios. Someone help me?

Lost admin password in the bios of my Acer Switch 10 can someone tell me how I can make reset? to reset the settings of the source windows solves the problem? the Erecover acer manager not working or open.

Hi ironman, Please run the following command in command prompt, in admin mode: powercfg -energy -output c:\energy-report-ironman.html Wait a bit, it will take a minute. Then it creates a .html file in your c:\ Please check the Battery Information section, compare the designed and last full charge capacity, it will tell you how powerful is your battery vs. the "factory maximum". Mine is 96% (divde the smaller number with the higher, you will get the percentage). Mine will do some 5,5hrs with wifi internet. Check this for further info: http://www.youtube.com/watch?v=YJUcwNazSyo

Similar Messages

I have forgotten password for my iPad 2. can someone help?

I need help I can't remember my iPad's password on the lock screen and I'm starting to worry. Has anyone got any ideas?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Enter a password for the ADMIN user,Error in installing Oracle Apex,

hi, everybody,
Greetings,
Iam trying to install oracle Apex, By coming this step it shows this error, Could you Please help me to solve this error.
SQL> @apxchpwd.sql
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
l_error_lines wwv_flow_global.vc_arr2;
ERROR at line 3:
ORA-06550: line 3, column 28:
PLS-00201: identifier 'WWV_FLOW_GLOBAL.VC_ARR2' must be declared
ORA-06550: line 3, column 28:
PL/SQL: Item ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 6, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 6, column 5:
PL/SQL: Statement ignored
ORA-06550: line 7, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 7, column 5:
PL/SQL: Statement ignored
ORA-06550: line 15, column 31:
PLS-00201: identifier 'WWV_FLOW_SECURITY.STRONG_PASSWORD_VALIDATION' must be
declared
ORA-06550: line 15, column 5:
PL/SQL: Statement ignored
ORA-06550: line 22, column 35:
PLS-00201: identifier 'WWV_FLOW_UTILITIES.STRIPHTML' must be declared
ORA-06550: line 22, column 9:
PL/SQL: Statement ignored
ORA-06550: line 25, column 9:
PLS-00320: the declaration of the type o

suresh.m2015,
It's going to be impossible for anyone in this forum to help with your issue if you don't provide any more detail about your environment and Apex installation. However, from your post it looks like the Apex database objects are missing or invalid.
Did you follow the Apex installation guide step by step? For example, did you run apexins.sql?
It's important to follow the documentation. The script you are running to change the admin user password should not be run until after the Apex installation is complete.
--Keith Malay

How to set password for IIAS admin

I have oracle IAS on linux, I would like to
set a password for IAS admin.
Thanks

Log in to DSCC, "Settings" tab, "Directory Service Managers" tab, click on the admin username you want to manage and follow the prompts.

I forgot my password for the admin on my macbook

I forgot my password for the admin on my macbook. Unfortunately I can't reset it with my apple-ID either. I want to keep my account since I need the things that's saved there. Anyone who can help me?

With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
With 10.4, 10.5 or 10.6 if you don’t have an install disk check this article. http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
If you're running 10.7 Lion check this article
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
With 10.8 or 10.9 restart holding the Command and R keys, then from the drop down
of actions, choose Terminal. When Terminal opens type:
resetpassword
and press enter.
You will get a reset password window from which you can select the user you want to reset, the admin account in your case. Type a new password twice, do not do anything with the hint box. Click Save, then confirm you want to do this reset. Then click apply to the user's home directory, and click the apple in the left corner, and choose Restart.

I have forgotten my admin password for my macbook air. can enyone help me reset it

i have forgotten my admin password for my macbook air. can enyone help me reset it

Reset Password
OS X 10.6 Snow Leopard
Follow the instructions in second and third boxes.
Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html

I cannot remember the password for my admin. I have an iMac OSX 10.9 any help??

I cannot remember my password for my admin login. I have an iMac OSX 10.9

Welcome to Apple Support Communities
First, reset the password with your Apple ID > http://support.apple.com/kb/HT1274
If it doesn't work, reset the password with Recovery > http://discussions.apple.com/docs/DOC-4101

Apple asking me security questions that ive never set up and i can't purchase anything, and ive tried resetting them but i can't remember the password for my rescue email address, please help?

Apple asking me security questions that ive never set up and i can't purchase anything, and ive tried resetting them but i can't remember the password for my rescue email address, please help?

You need to either reset the rescue email address's password(check the site's help for instructions) or ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(99674)

TS2446 my app store is not working, i tired signing in but showing me "An unknown error has occurred" my password is not wrong, please and someone help, because i need to update my macbook air. thank you

my app store is not working, i tired signing in but showing me "An unknown error has occurred" my password is not wrong, please and someone help, because i need to update my macbook air. thank you... how can i make it work?

I cannot sign out. When I go to the iTunes & App Stores in settings, The Apple ID field shows my id but it is faded and I cannot select the field.

When I try to use FT on my MBP, connected to a 24" display, and close the shell, the display camera says it is not turned on. I have looked and looked for a solution. Can someone help? Thanks

When I try to use FT on my MBP, connected to a 24" display, and close the shell, the display camera says it is not turned on. With the MBP open, FT works fine. I have looked and looked for a solution. Can someone help? Thanks

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?

I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?

Have you signed out of your iTunes account on the device/computer that you are using and signed back in with the updated password ? That should 'refresh' the account on it, and you should be able to use the account's new password to download updates to its apps

TS4268 My iphone will not send imessage for normal messages. please can someone help?

My iphone will not send imessage for normal messages. please can someone help?

Hi maccaman82,
If you are having issues sending messages from your iPhone, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

Password for user admin

Hello,
I have to change the PW for user admin and tried to do this in the ERP/SU01 on every client.
The connection to XI was lost. The error 'can not read exchange profile' occurred.
I reset the password of user admin in all clients to default and entered the user admin and password in the http://<xi-host>:<j2ee-port>/exchangeProfile.
This worked fine.
But now I get the periodic error that user admin on client 200 is locked due to wrong logon and XI does not work. Error as described above
Okay. I can unlock user admin, but the error occurs periodically.
Is there a description how to change the PW for user admin and get rid of this error. I found a SAP Note (936093), is this the way to do it?
I assume user admin is locked every time the portal fails to contact XI, but I am not sure.
Best Regards
Maximilian

Try reflashing the firmware and see if that alleviates the issue. If not call into 866-606-1866 for further troubleshooting.

Lost password for Apple ID and the email on record is no longer valid

Hi,
I have to apple accounts, one for Mexico, where I live, and one for the US Store, where I made some purchases.
I just bought a new computer and would like to transfer all of my iTunes related files to the new computer. However, I do not remember my password for the US store. Since I created it several years ago, the email that I submitted when I created the account is no longer valid. So, it is no use to send me an email to that address to reset the password of my US account because that email address does not work any longer.
I have tried answering the security sessions instead, but even though I am positive that I am submitting the correct answers, I get a message claiming that my answers do not match the ones Apple has on record. So....
What can I do to retrieve my password and have access to the files that were purchased in the US store?
Thanks in advance for any help on this issue.

Hi Larry,
Thanks for your reply. I tried following that link, but I didn't get anywhere. It gave me the same two options to reset my password:
a) Email a link to an account that no longer exists
b) Security questions, which for some reason did not work.
So I am basically stuck in the same place: I cannot access my US iTunes account.

When macbook air restarts, it does not require the password for the admin

I set up parental controls on son's Mac boolk air, but anytime it is restarted, it defaults to the admin account without haveing to enter pasword. So basically, pointless to have controls if he can just use admin account.

A. He can't use the admin account unless you gave him the password.
B. He cannot access the admin account on startup unless you are using automatic login on the admin account.
Turn off Automatic Login in Users & Groups under Login Items. Start using a new password on your admin account and keep it secret.

Acer Switch 10 lost password for super admin of Bios. Someone help me?

Similar Messages

Maybe you are looking for