Acess to few roles missing in analyser

Hi,
Some of our users are facing issues, they could see the roles assigned to them untill last week, however after the upgrade this weekend (Possibly) they cannot view certain roles in the analyser.
The power users do not face this issue.
Kindly suggest what are the possible solutions to this please. Thank You!

Forums here are user-to-user, so I wouldn't hold my breath on Apple seeing your comments.
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

Similar Messages

  • After upgraded to version 5 few things missing..

    Hi,
    I am using blackberry curve 8520.. I have been using this for almost a year already. I noticed, there are few things missing and some problems occurred when I upgraded to version 5. Eg. Memopad, No column in option for alarm tones, my BB getting slower during browsing, everytime I try to connect to wi-fi, it will be intermittent or not connected.
    For unable to connect to wifi, I suspected it is browser issue but then I set to default setting it is still the same.
    Can somebody help me to rectify this please?
    Tq.
    Solved!
    Go to Solution.

    Memopad: 1. On your homescreen, press the Menu key > SHOW ALL, so that SHOW ALL is checked.
    2. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
    If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
    If still can't be found, read this link.
    Alarms tones? Can you elaborate?
    Slow or lagging device, please see below.
    i don't know about your WiFi issue, you would also need to elaborate your problem.
    To prevent freezing or lagging/slow response on any BlackBerry, the most important practice you can adopt is to be sure to CLOSE applications when you are finished using them.
    If you just hit the red "end call" key to go back to the home screen the application actually stays open and running in the background. If you do this repeatedly you will have lots of apps open and consequently your memory will get used up. Lack of memory is the biggest reason your BlackBerry slows to a crawl or locks up. If you get into the habit of actually using the menu key to close the applications this will at least slow down this memory-clogging process. You still may have to do a battery pull or use the "Quickpull" app once in a while when things get slow.
    To check what applications are running on your device in the background, press the Menu key then choose Switch Applications. You will see the icons of each application there.
    So now, check your applications running in the background. There are commonly four or five applications that will always be running (Messages, Call Logs/Phone, BlackBerry Messenger, Homescreen, and the Browser; there are other third party applications such as BeeJive, and BlackBerry Alerts which will also run in the background which you cannot close if you want them to operate). Make certain that the browser is NOT on an active webpage (open the browser and choose Menu > Close). Close any other applications that do not need to be running (the camera or a game you were playing or Google Maps).
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Does "Access Enforcer" only support "role" based SOD analyse?

    Hi Expert,
    In the demo script, when the user create the "Access Request Form", he can choose the "Role" he wanted from "Select roles" list, I'm just wondering whether each role here is corresponding to the role in the backend system? for example,
    If I choose role "Z_AP_ACCOUNTANT" actualy at that time there is a role called "Z_AP_ACCOUNTANT" already in the backend system if the system is a SAP ECC system.
    Another question is, if so, does that mean it can only support "Role" based SOD analyse? as you know, each role may contain several "authorization objects", can it be done from "authorization object" level?
    Thanks and best regards.

    Hi,
    The Roles are normally determined based on the SOD.Using T/code:PFCG the roles are mapped to the system.These Roles are common to all the system,regardless of R3,Virsa etc.
    The roles also can be determined without SOD [but this is not recommended.].
    The SOD is only to ensure that there exist no internal control weaknesses while creating the Roles at an organizational level.Thus it is only an excercise outside the System,be it SAP,Virsa or else.
    At the system level we map only the roles [ using :PFCG].We dont map SOD here.So,SOD or No SOD,the system supports the Roles.
    Hope this helps.
    Regards,
    Ramesh.

  • Content Management Role missing in EP 7

    Hi Experts,
    I have to store some documents in SAP EP KM. I have noticed that Content Management Role missing. We are using EP 7. Its strange. Can you please let me know the reason. Earlier I was using Content Management role for storing documents, Collaboration etc.
    Regards,
    Gary

    Hi,
    Go to User Administration ->  Identity Management.
    Select the user and  click the modify button.
    Go to the assigned roles tab
    search for the Content Manager
    Add only pcd:portal_content/specialist/contentmanager/ContentManager role and save.
    Hope that helps.
    Raghu

  • Role Based Risk Analysis Report

    Hello All,
    When I executed the Risk Analysis report for a role with SOD Risk Level = ALL and Report type = SOD at Authorization Object level, the results come back as "NO CONFLICT FOUND".  this is the correct response.
    However, I executed the Risk Analysis report for the same role with SOD Risk Level = HIGH and Report type = SOD at Authorization Object level, the results come back SOD conflicts based on the conflicting transactions.  Is there a bug with analyzing roles using this option?
    Also, when I click on the Detail Report button, I received object data that does not appear correct.
    Please Help.  Thanks.
    Edited by: Michael Johnson on Apr 8, 2009 8:54 PM

    Hi Babiji,
    Are you using any specific tools for SOD's? If you are using GRC tool, then it can be done using compliance calibrator Role level Risk analysis.In addition to what Sneha has said,
    To find out the conflicting roles in CC version 5.2 the path is INFORMER->Risk Analysis->Role level.In Virsa 4.0 you have the option of carrying out risk anaysis at role level by executing the t-code /N/VIRSA/ZVRAT.
    In section Analysis type, choose Roles and enter the list of roles.
    In section SOD Risk level, choose the appropriate risk.
    Then choose the appropriate report type and report format before executing it.
    This will display all the roles with the levels of risk associated with it and then you can mitigate these as per your organizational policies & procedures.
    Thanks,
    Saby..

  • Abnormal Shutdown and roles missing

    Yesterday my database shutdown abnormally.. after opening the connect,dba ansd some other roles missing . and users cannot able to connect .later I give the create session privilage to all users then they can able to connect How it happened? please help
    How it happened?
    alert log file
    Thu Feb 15 09:02:13 2007
    ARC1: Completed archiving log 1 thread 1 sequence 4726
    Thu Feb 15 09:20:53 2007
    Thread 1 advanced to log sequence 4728
    Current log# 3 seq# 4728 mem# 0: /data/oradata/wg92/redo05.log
    Thu Feb 15 09:20:53 2007
    ARC0: Evaluating archive log 4 thread 1 sequence 4727
    ARC0: Beginning to archive log 4 thread 1 sequence 4727
    Creating archive destination LOG_ARCHIVE_DEST_1: '/oraarc/wg92/arch/1_4727.dbf'
    Thu Feb 15 09:21:37 2007
    ARC0: Completed archiving log 4 thread 1 sequence 4727
    Thu Feb 15 10:13:20 2007
    Thread 1 advanced to log sequence 4729
    Current log# 1 seq# 4729 mem# 0: /data/oradata/wg92/redo06.log
    Thu Feb 15 10:13:20 2007
    ARC1: Evaluating archive log 3 thread 1 sequence 4728
    ARC1: Beginning to archive log 3 thread 1 sequence 4728
    Creating archive destination LOG_ARCHIVE_DEST_1: '/oraarc/wg92/arch/1_4728.dbf'
    ARC1: Completed archiving log 3 thread 1 sequence 4728
    Thu Feb 15 13:51:38 2007
    Shutting down instance (abort)
    License high water mark = 135
    Instance terminated by USER, pid = 7740
    Thu Feb 15 13:48:50 2007
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    SCN scheme 3
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up ORACLE RDBMS Version: 9.2.0.1.0.
    System parameters with non-default values:
    processes = 150
    timed_statistics = TRUE
    shared_pool_size = 117440512
    large_pool_size = 16777216
    java_pool_size = 117440512
    control_files = /data1/oradata/wg92/control01.ctl, /data2/oradata/wg92/control02.ctl, /data3/oradata/wg92/control03.ctl
    db_block_size = 8192
    db_cache_size = 318767104
    compatible = 9.2.0.0.0
    log_archive_start = TRUE
    log_archive_dest = /oraarc/wg92/arch
    db_file_multiblock_read_count= 16
    fast_start_mttr_target = 300
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    undo_retention = 10800
    max_enabled_roles = 100
    remote_login_passwordfile= NONE
    db_domain =
    instance_name = wg92
    dispatchers = (PROTOCOL=TCP) (SERVICE=wg92XDB)
    job_queue_processes = 10
    hash_join_enabled = TRUE
    background_dump_dest = /oracle/app/product/9.2.0/oracle9/admin/wg92/bdump
    user_dump_dest = /oracle/app/product/9.2.0/oracle9/admin/wg92/udump
    core_dump_dest = /oracle/app/product/9.2.0/oracle9/admin/wg92/cdump
    sort_area_size = 524288
    db_name = wg92
    open_cursors = 300
    star_transformation_enabled= FALSE
    query_rewrite_enabled = FALSE
    pga_aggregate_target = 25165824
    aq_tm_processes = 1
    PMON started with pid=2
    DBW0 started with pid=3
    LGWR started with pid=4
    Please help

    later I give the create session privilage to all users With what privilge do you logged on yourself to grant privileges?
    users cannot able to connect Which users cannot connect. Do you mean all users excluding sys?
    If you start your database in restricted mode then users with restricted session privilege can only connect. Is this your case?
    Message was edited by:
    Vishal V.

  • Following mandatory roles missing in partner maintenance

    Dear Experts,
    i'm getting warning message Following mandatory roles missing in partner maintenance: ZF, ZV when i'm creating PO,
    i'm getting this waring even though i delted partner roles ZF,ZV and related Schema as well,can u pls tell me how to avoid this warning
    Thanks in advance

    Hi,
    Did you maintain the partner function ZF and ZV and assigned to your Account group. If yes go to
    SPRO-> Material Management->Purchasing->Partner Determination->Partner Settings in Vendor Master Record-> Define Partner Schemas
    In this Screen, select your partner schema, you created earlier and click Partner Function in Procedure .System takes to next screen and now check Mandatory check box of your  partner function ZF and ZV are ticked or not. If not, tick it and save.
    Also check assignment of Partner Schema to Account group.
    Now try to Create PO and hope you would not have problems.
    If helpful to you, then reward.
    Regards,
    Biju K

  • Display of roles missing in BEx dialog box

    Hi Experts!
    I am facing an issue with BEx:
    We just upgraded to Support Package 18 and afterwards all roles in the BEx dialog boxes are missing. Before upgrading everything was fine.
    If we assign SAP_ALL to local users, they are able to see roles, but if we don't, they don't even see their assigned roles.
    I searched the OSS and SDN but couldn't find an answer to that problem.
    Any suggenstions?
    Thanks in advance!
    Inga

    Hi
    Recheck the same at PFCG / SUIM for the Authorization may be  they must be recheck/save/reactiavte with SAP_NEW - All new authorization objects added during an upgradation??
    Basis team can help you in this
    Hope it helps

  • Few data missing from CTX file, need source for CTX file

    Hi Experts,
    We are using ACH-CTX via Payment Medium Workbench (PMW) and not Via RFFOUS_T program.
    The CTX file is generating and now the issue here is few data is missing for some ADDENDA records. But for some ADDENDA lines the data is perfect. Could anyone help me out where exactly the mapping is done for generating CTX File and where the data is coming for this CTX file. As per technical consultant the Event 30- FM: FI_PAYMEDIUM_ACH_30 is appending the ADDENDA record. But where exactly the values are coming from for these FM or for the CTX File. Please revert ASAP.
    Thanks,
    Venkadesh

    Hi Experts,
    We are using ACH-CTX via Payment Medium Workbench (PMW) and not Via RFFOUS_T program.
    The CTX file is generating and now the issue here is few data is missing for some ADDENDA records. But for some ADDENDA lines the data is perfect. Could anyone help me out where exactly the mapping is done for generating CTX File and where the data is coming for this CTX file. As per technical consultant the Event 30- FM: FI_PAYMEDIUM_ACH_30 is appending the ADDENDA record. But where exactly the values are coming from for these FM or for the CTX File. Please revert ASAP.
    Thanks,
    Venkadesh

  • GRC10 Exclude Objects (Roles) - Batch Risk Analysis Job

    All -
    We are setting up some non-production GRC 10.1 systems at this time and are trying to exclude project roles from our dashboards via the "Maintain Exclude Objects for Batch Risk Analysis" table [SPRO --> GRC --> AC --> ARA --> Batch Risk Analysis].
    The problem that we are encountering is that this Batch Risk Analysis is taking an extremely long time to run on our Project Users even though we have excluded the project roles that these users are assigned.
    For example, User A has 3 project roles which hit a very large number of SoD violations in our rule set, however in the exclusion list we have defined the three roles the user is assigned to be in the exclusion table for All systems and for the specific system that the job is running against. With no luck. The job still takes an average of 30 minutes to run on each user even though the roles they are assigned are excluded.
    We have tested that the exclusion table works because we can exclude the users by adding them to this table and we can also exclude the groups that they are in and this also works. However we have instances where there are other users in this groups that have other roles in addition to these excluded roles that need to be checked.
    Does anyone have any recommendations for how to excluded roles so that the job quickly checks the users with these roles? It is my understanding that if the roles are in the exclusion list they should be skipped by the Batch Risk Analysis job which is running to check these users for the dashboards.
    Thanks,
    Darnell

    Hi,
    Was a solution found for this error?
    Thanks,
    Glen

  • Admin tab user role missing!!!!!

    I need help,
    it seem I have error,
    when I play with user role in admin tab.
    when I restart pc server, I have problem to access my BI Publisher.
    I just see
    tab report, schedule.
    admin tab missing .
    and all my report I make missing to.
    How to fix it,
    Oh when I change password in analytics it change to in BI publisher,
    analytics = BI publisher,
    But admin tab missing how to fix it help me urgent!!!!
    Thanks.
    For Your help and Supporting.

    XMLP_ADMIN,XMLP_DEVELOPER,XMLP_SCHEDULER
    CREATE THESE GROUPS IN ADMINISTRATION.AND ADD ADMINISTRATOR IN THIS GROUPS.
    TRY THIS IT WILL WORK

  • Predefined Roles Missing in Authorization Management Tool

    Hi Guys,
    The Predefined roles
    SAP_AMT_AUTHORIZATION_ADMINISTRATOR
    SAP_AMT_USER_ADMINISTRATOR
    SAP_AMT_ROLE_ADMINISTRATOR
    are missing when I logged in to AMT.
    I checked the SAP notes and found the note 657434.
    It asked me to run the report INSERT_ADDITIONAL_AMT_ROLES_40.
    I ran the report in the CRM system using transaction se38.
    and ran the ConnTrans
    But even then the roles are not visible in the AMT.
    Did I miss any other Steps.

    Hello Zack,
    Did you make a manual extract of the subscriptions for the site?
    Are some messages coming to the mobile?
    If not, try to regenerate the replication object/publication with transaction SMOGGEN and make an extract again.
    Regards,
    Frédéric

  • Solaris9: smpatch analyze indicate wrongly only few patches missing

    Hi,
    On my Solaris 9 system (through LPS solaris 10), smpatch analyze indicates only 3 patches missing (SAN4.4.x).
    But when I check with patchdiag.xref, i find it should indicates much more.
    I manuallly add (patchadd) the patch 140476-01 as indicated in the last smpatch messages (2009/01/13) to take in account the new certificates and new patchset (current2).
    Could you tell me what I missed and how I can recover the fully functionnal smpatch ?
    My smpatch configuration is
    Local (S9)
    patchpro.backout.directory - ""
    patchpro.baseline.directory - /var/sadm/spool
    patchpro.download.directory - /var/sadm/spool
    patchpro.install.types - rebootafter:reconfigafter:standard
    patchpro.patch.source http://proxymach:3816/ https://getupdates1.sun.com/
    patchpro.patchset - current2
    patchpro.proxy.host - ""
    patchpro.proxy.passwd **** ****
    patchpro.proxy.port - 8080
    patchpro.proxy.user - ""
    proxymach (S10)
    patchpro.backout.directory - ""
    patchpro.baseline.directory - /var/sadm/spool
    patchpro.download.directory - /var/sadm/spool
    patchpro.install.types rebootafter:reconfigafter:standard:singleuser:rebootimmediate:reconfigimmediate rebootafter:reconfigafter:standard
    patchpro.patch.source - https://getupdates1.sun.com/
    patchpro.patchset - current2
    patchpro.proxy.host myproxy ""
    patchpro.proxy.passwd **** ****
    patchpro.proxy.port 80 8080
    patchpro.proxy.user - ""

    First, thanks for the analysis of sidmir. And thanks for having taken my problem in account.
    Second, the patchdiag.xref i meant is the crossref of the patchdiag-1.0.4 tool.
    I put an excerpt result of the patchdiag command on ACSLSCTI (i removed the CURRENT lines) is below. I consider that what patchdiag is warning about should be returned by smpatch analyze.
    System Name: ACSLSCTI SunOS Vers: 5.9 Arch: sparc
    Cross Reference File Date: Jan/20/09
    PatchDiag Version: 1.0.4
    INSTALLED PATCHES
    Patch Installed Latest Synopsis
    ID Revision Revision
    111703 03 04 SunOS 5.9: /usr/ccs/bin/sccs and /usr/ccs/bin/make patch
    111711 16 19 SunOS 5.9: 32-bit Shared library patch for C++
    111712 16 19 SunOS 5.9: 64-Bit Shared library patch for C++
    112661 11 13 SunOS 5.9: IIIM and X Input & Output Method patch
    120464 01 03 Obsoleted by: 114344-18 SunOS 5.9: ifconfig, in.routed, ipmp patch
    122300 19 35 SunOS 5.9: Kernel Patch
    125673 01 02 GNOME 2.0.2: SUNWTiff libtiff library patch
    126982 01
    ======================================================================================
    UNINSTALLED RECOMMENDED PATCHES
    Patch Ins Lat Age Require Incomp Synopsis
    ID Rev Rev ID ID
    113023 N/A 01 2281 SunOS 5.9: Broken preremove scripts in S9 ALC packages
    137910 N/A 02 141 SunOS 5.9: tk patch
    138575 N/A 01 61 SunOS 5.9: rpc.ypupdated patch
    ======================================================================================
    UNINSTALLED SECURITY PATCHES
    NOTE: This list includes the Security patches that are also Recommended
    Patch Ins Lat Age Require Incomp Synopsis
    ID Rev Rev ID ID
    112902 N/A 08 2238 112233-01 WITHDRAWN PATCH Obsoleted by: 112902-11 SunOS 5.9: kernel/drv/ip P
    112902 N/A 12 2095 112233-01 Obsoleted by: 112904-07 SunOS 5.9: kernel/drv/ip Patch
    112904 N/A 09 1926 112233-07 WITHDRAWN PATCH Obsoleted by: 112233-11 SunOS 5.9: tcp/ip Patch
    138577 N/A 01 14 117171-17 SunOS 5.9: kernel/sys/kaio patch
    140426 N/A 01 2 SunOS 5.9: ptsl patch
    If smpatch is functionning well, do you have any clue why it is not listing those missing patches ?

  • MS Excel cannot read the Roles definition on Analysis Service cube

    Hello,
    While using Analysis Service connection via Excel, apparently it does not automatically provide Roles or EffectiveUserName in the connection string based on username/password we provide. We must manually edit the connection string.
    Does this thing already defined as bugs, or there is other explanation ? Is there any related with this ?
    Thanks.

    Hi Prayijana,
    In your scenario, you said that you need to manually edit the connection string for different users to connect to SQL Server Analsysi Services Multidimensional database, right?
    When using excel to interact with a SSAS cube, we can use the default settings "Use the authenticated user's account". In this case, excel will use the current account to connect SSAS cube. If the account has a matched role on the databse,
    then he can access to the cube.
    If this is not what you, please provide us more informantion, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Roles missing in available role list at import role option

    We have sap boxi 3.1 and sap integration kit both with SP2.
    we configure sap authentication in the CMC.
    The entitlement system is configured with  a user that has no restriction in sap (SAP ALL user).
    We have approximately 1400 roles in our BW client
    In the available roles list at the import role tab we can see only 220-230 roles.
    The list is randomly.
    When we configure another bw client as a different entitlement system,
    we receive approximately 280 roles out of 1380.
    It looks like we are missing some buffer size configuration.
    Any ideas ??
    thanks.

    Hi Ingo,
    Thanks a lot.
    Yes, the user in the CMC has SAP ALL credential, and is allowed to see all BW roles.
    The missing roles are indeed those that are not assigned to any user.

Maybe you are looking for