Acessing sensors on non JSR-256 compatible devices

Hi there!
It turns out that my phone, although having a built-in accelerometer, does not support the MSAPI, i.e. JSR-256. Personally, I think that is because Nokia holds the license for the API, but as I have no real experience with Java ME, it's just my opinion. However, I wonder if anyone know whether one can access the accelerometer without using MSAPI? Or is there a way to make my phone MSAPI compatible (only for personal testing, of course). Probably both answers would be negative as hardware interfaces must be concerned, but you see it would be such a waste of functionality if there is no other way for Java ME to access the valuable sensor information.
Thank you immensely!

Usually few JVM/KVM so to say implementions will not throw "ClassNotFoundException". Instead you modify the code to check for null object.
Must solve your problem for un-supported devices.
~Mohan

Similar Messages

  • I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions?

    I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions? Thanks.

    Google

  • Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:

    Hi,
    Im having a problem on my 2801 router, my fxo and fxs port are not fucntioning, when i check the dsp it shows below; i have tried different ios still the same problems encountered.
    rtr01#show voice dsp detailed
    edsp 0001 01 g729r8 p  0.1 IDLE  50/0/1.1
    edsp 0002 01 g729r8 p  0.1 IDLE  50/0/5.1
    edsp 0003 01 g729r8 p  0.1 IDLE  50/0/6.1
    Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:
    This is not recommended, the IOS default version is 24.3.0
    ----------------------------FLEX VOICE CARD 0 ------------------------------
                               *DSP VOICE CHANNELS*
    CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
    LEGEND     : (bad)bad    (shut)shutdown  (dpend)download pending
    DSP   DSP                 DSPWARE CURR  BOOT                         PAK   TX/RX
    TYPE  NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
    ===== === == ========= ========== ===== ======= === == ========= == ==== ============
    C5510 001 01 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 02 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 03 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 04 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 05 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 06 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 07 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 08 None           0.0.0 bad   idle      0  0                 0          0/0
                               *DSP SIGNALING CHANNELS*
    DSP   DSP                 DSPWARE CURR  BOOT                         PAK   TX/RX
    TYPE  NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
    ===== === == ========= ========== ===== ======= === == ========= == ==== ============
    C5510 001 01 {flex}         0.0.0 free  idle      0  0 0/0/0           0          0/0
    C5510 001 02 {flex}         0.0.0 free  idle      0  0 0/0/1           0          0/0
    C5510 001 03 {flex}         0.0.0 free  idle      0  0 0/2/0           0          0/0
    C5510 001 04 {flex}         0.0.0 free  idle      0  0 0/2/1           0          0/0
    ------------------------END OF FLEX VOICE CARD 0 ----------------------------
    #sho voice port summary
                                               IN       OUT
    PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
    =============== == ============ ===== ==== ======== ======== ==
    0/0/0           --  fxs-ls      up    dorm on-hook  idle     y
    0/0/1           --  fxs-ls      up    dorm on-hook  idle     y
    0/2/0           --  fxo-ls      up    dorm idle     on-hook  y
    0/2/1           --  fxo-ls      up    dorm idle     on-hook  y
    50/0/1          1      efxs     up    up   on-hook  idle     y
    50/0/5          1      efxs     up    up   on-hook  idle     y
    50/0/6          1      efxs     up    dorm on-hook  idle     y
    PWR FAILOVER PORT        PSTN FAILOVER PORT
    =================        ==================
    can somenone help to advice. th

    Hi,
    I see that the DSPware version says 0.0.0 and the current state shows "BAD" which should not be the case. Are you running 12.4(24)T IOS because i see that the default version of DSP should be 24.3.0 as printed in the output. By default the IOS itself contains the default DSPware in it but if it does not show up in your router, try reloading the router to see whether it fixes your issue. If not check the following link which lists the steps to be followed to install a new DSPware on your router.
    http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080a7af82.shtml
    Hope that helps
    Regards
    Nitesh
    PS:pl rate helpful posts

  • "WIA support" says "No WIA compatible devices were detected"

    I have just got PS6, Windows 7, 64-bit. I am trying to connect my old scanner, an Epson Perfection 4870 Photo.
    The Adobe "Help" says that I must use WIA (Windows Image Acquisition) instead of TWAIN.
    However, when I go File > Import > WIA support (as per many instructions online), I just get the message "No WIA compatible devices were detected".
    I have ensured the driver for my scanner is up-to-date.
    I am unable to find any advice online for how to determine whether I have this WIA software on my PC.
    I am unable to find any advice on whether the scanner and WIA are, indeed, incompatible (in which case, I'd be fighting a losing battle).
    If anyone has any experience with this issue, I'd love to hear from you.
    Thanks.

    WIA,  even if you have it is very limited. You would be better off scanning to file with the Epson scanner software and opening it in Photoshop. Twain only exists for 32 bit Photoshop, which is also installed along with the 64 bit version.  Of course there is a 2 GB limit to the memory 32 bit Photoshop can access.
    Twain also holds up Photoshop until the scan is done.
    If you still want Twain, a third party paid solutions is Vuescan, which supports 2500 scanners and gives you a lot of control over your scan. It comes with 32 bit and 64 bit Vuescan twain drivers if you wish to scan from the menu.
    This Epson FAQ may help: Epson Perfection 4870 Pro, FAQ - Technical Support - Epson America, Inc.
    Gene

  • "This code is for an app that is not compatible with this device.  You can redeem it on your desktop computer or a compatible device."

    Keynote code says not for this device HE6FYH769R44 “This code is for an app that is not compatible with this device.  You can redeem it on your desktop computer or a compatible device.” iPad 2 Version 4.3.5 (8L1) Model MC916LL Serial Number:  DN6G9C4LDFJ0

    thanks kiltedTim its working your right it appears as they same game and now i can purchased and buy and item using my new apple id thanks a lot your a great help, Oppps i have one more questioned on it you have any idea how to changed a country regioned that still have a store credit balanced of point .23$ i want to changed it into the japanes store that which i have and itunes card, 

  • Compatible devices

    Hi ,looking for something like a pocket pc which is compatible with Mac Tiger which has a voice recorder capability and ,preferably, a phone , but not essential
    I got the following Apple list of phones that will sync but my guess is they are all obsolete now as its quite old
    iSync: Supported mobile phones in Mac OS X v10.4, 10.5, and 10.6
    anyone got any suggestions please? Thanks

    Most current products, such as an iPod Touch or other item which could sync with a
    Mac and provide certain kinds of functions, would require a later OS X version than
    Tiger 10.4.11. You could get and use OS X 10.5.8 Leopard in your old PPC Mac;
    and that should support some newer product, for a time at least.
    There are apps for newer data phones to use them as portable computer devices;
    they have microphones, cameras, and elegant features. If you go to buy anything
    new, be sure to read the product specification and support information beforehand.
    With new Apple products, their specs and requirements are in the Store, online.
    {Many require the use of a later iTunes app and the newer version of iTunes Store
    as viewed via the app online; once installed. This requires a newer OS X than Tiger.}
    So, you may have a time getting the retail version Leopard 10.5, but you could
    try calling Apple Sales at 1-800-MY-APPLE* and ask about getting this system
    from Apple; since it no longer is available in a retail environment. If available, it
    could set you back about $129. or so; that's less than an auction/ebay gamble.
    **In the UK,* look to the upper left-hand margin in the online Apple Store to see the
    contact number for the Apple Sales, to see about getting the outdated OS X 10.5
    retail version DVD, if still available. *Apple UK Sales phone: 0800 048 0408*
    The issues surrounding compatible devices really depend on what ones are
    considered; and then what supporting OS version they require to work. As I
    do not have any idea on that matter, perhaps someone will offer more ideas?
    Good luck & happy computing!
    +{ edited }+

  • I replaced an old airport extreme with a new one.  None of my wifi devices will connect - always say incorrect password.  Reinstalled old device, works fine.  Any ideas?

    I have a 5 year old airport extreme.  I bought a new one to upgrade for better range.  I connected the new one to the internet with a few problems, but a phone call to my internet provider resolved them.  With an ethernet cable from the new airport extreme to my iMac, I'm connected.  However, none of my wifi devices will connect.  They see the network, but it either says "incorrect password" if I'm trying a new network name and password, or it repeatedly asks me to reenter the password if I use the old ones.  I reinstalled my old airport extreme and everything works fine.  I'm about ready to box up the new one and return it.  Any ideas?

    It is extremely difficult to fix these issues.. remotely.
    If none of your wifi devices work.. that does sound unusual..
    Have another try.. This time deal with the COMPUTER only.. leave everything else turned off.
    Unplug the Extreme from the router.. reset it to factory.. do this full setup.
    Unplug power from the Extreme.. hold in the reset button.. plug in the extreme to power and keep holding in the reset.. 10sec or so the front led should flash rapidly.. release the reset and wait a couple of min.
    Now in the computer does the Airport extreme show up under wifi as new device??
    Please make sure IPv6 is set to link local only to go further but it should work no matter what the settings are.
    No luck clear out all the old wireless names from the computer.. reboot the computer and try again to scan for new wireless devices.
    Hold the reset and try again.. it must appear in the wifi to be setup.
    No sign of it the unit is faulty and can be returned.

  • Compatible devices with AIR?

    Hi,
    I've seen at the developer center a table of compatible devices with AIR, but it does not include any iOS device, just androids, apple is not on the list. Are ALL the iOS devices compatible? or just some versions?
    thanks!

    The system requirement for AIR on iOS are
        iPod Touch 4th generation, iPhone 3GS or 4,  iPad
        OS 4 or later

  • HT202794 About Free Apple Apps for iOS 7 compatible devices

    iPhoto, iMovie, Pages, Numbers, and Keynote are free on the App Store for qualifying iOS 7 compatible devices activated or purchased after September 1, 2013.
    The first time you launch the App Store in iOS 7 on your qualifying new or factory refurbished iOS device, you will be offered iPhoto, iMovie, Pages, Numbers, and Keynote for free in addition to other free software from Apple. When you tap Download All and sign in with your Apple ID, the apps will download to your device and appear in your store account. If you tap Not Now when you see the offer, you can search for the apps in the store and download them one at a time for free
    On my new iPad air the apps listed are not free on the App Store for me.

    You are logged in with the account that activated the iPad ? Try tapping on your id at the bottom of the Featured tab in the App Store app and then log back in see if they then show as free.

  • Msi gs 70 2od "please connect steelseries compatible device"

    Hello
    Ive got big issues with getting steelseries/klm working. I wanted to turn on keyboard backlight using fn +- combination but it doesnt work at all.
    Some say that keyboard should light up when i turn on the laptop but its all dark.
    Ive reinstaled the os (w8), updated bios and ec, did ec reset, reinstalled klm sse scm - without any effects. Also SSE says "connect sse compatible device". Ive checked device manager - all drivers present. in Keyboards section ive got msi hid device.
    Please help me :(

    You might try this:
    Open Device Manager.
    Right click the Steelseries keyboard under "Keyboards" and/or the MSI device, and choose to "Update Driver Software".
    Choose "Browse my computer for driver software"
    Browse to the SteelSeriesDrivers folder. On my computer it's in Program Files\SteelSeries\SteelSeries Engine.
    Click OK.
    Click Next.
    This should ensure you have the correct driver installed.

  • No wia compatible devices Win 7

    I used PS and an Epson 1650 scanner for many years. Bought a new Win 7 64 bit computer recently and installed CS 6 Extended.  Now, when I try to import from the scanner I get the error msg:  "No WIA compatible devices were detected."
    Any help would be appreciated.
    Chuck

    Hi Chuck, because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
    To help others help you, please read through this article and provide any additional relevant details.

  • No compatible devices detected - error

    Hello
    I have a normal Samsung digital camera and I am trying to use Photoshop's help to install photos using WIA support, but Photoshop tells me that no compatible devices were detected. I have Win XP and I have installed the most recent Abobe update. The camera is switched on and uses a USB cable. If I disconnect the camera from the PC tower and plug in a flash drive, the PC can detect it.
    What could be wrong please?
    Thanks
    Steve

    Hello
    many thanks to you both for your replies.
    I'll look into a card-reader if I can't resolve this, but usually I don't have problem with it.
    Yes, I get the sound recognition noise when I plug in the cables and turn the camera on.
    I have attached two screen shots. Windows is seeing the camera as a removable device as it would a flash drive, but that other image looks a bit bare to me. Usually it asks I I want Windows to copy the images from a camera or scanner, which I think might imply that some Windows settings have changed/files missing - and maybe that is why Photoshop cannot see the camera?
    Thanks again.
    Steve

  • No JSR-75 on device, but cannot pack data into the jar itself : am I stuck?

    I'm currently developing a translating tool for a non-JSR75 device (Nokia 6230).
    My application needs to access a big list of words, which cannot either be packed in the jar as it would make its size greater than 128k, which is the limit on my device.
    Is there a third solution, or am I fried?

    I think there is no other solution except making queries on a remote site ...
    The methods I see for storing/quering data :
    - In the jar file
    - In the record store (RMS API)
    - With JSR 75 In new storage area (mainly cards)
    - In a remote site and you open a connection to this site via basic network calls or higher level methods thanks to web services
    One thing that is sure with this limit of the jar file is that is different on most phones.
    You can think about a way to compress your database maybe;
    Regards.

  • Compatible devices/accessories question

    This may have been addressed in one of the many posts before it and if it has been I apologize and would be grateful for a referral to its answer...
    I'm looking to buy a 4th Generation nano 16GB and am perfectly alright with it not charging on my non apple devices. What I am worried about is it not playing on those devices at all (my other ipod which cost me $250 just last year was stolen and once I buy this new ipod I sure won't have money to spend on new apple accessories, as fun as they might be). So my question is, if anybody has any personal experience to share, will this new ipod nano work with my belkin car adapter (not a tape adapter, one that plugs into the charger part of the pod) and/or my jensen ipod alarm clock?
    Thanks in advance for your help!

    My dad bought me a Belkin charger today and when I plugged my 4th gen iPod in, it wouldn't charge. It said on the screen "Charging is not supported by this accessory" and it won't work with my Belkin TuneSync either. It just won't charge it for some reason.

  • None of Blue tooth devices are being detected by my iPad

    My iPad won't detect any bluetooth device. It keeps on looking and looking but will not detecte while the same device will be detected by my iPhone 4 and iPhone3.
    I have tried 3 Hands free blue tooth devices but none is being detected. iPad won't even detect the iPhone 4 sitting next to it.

    Many headsets use the Hands Free Profile (HFP) which is not supported by the iPad but is supported by the iPhone. On the iPad you can connect to devices that uses the A@DP profile which support stereo headphones and some headsets and speakers, keyboards via the HID profiles and some other devises for gaming. See the following for supported profiles:
    http://support.apple.com/kb/HT3647

Maybe you are looking for