ACF Sneakpreview NW04 SP15 and Adobe Credential files SP15

Hi there all,
As most of you already read, the Adobe Interactive Forms are not working correctly in SNeakPreview(SNP) NW04 SP16. I also have the SNP NW04 SP15 and want to install this version. But i do not have the Adobe Credenitial and ACF for this version. I searched SDN for the files, but i didn't found them. Maybe one of you has the files. If so pls send them to me by mail (smeagol_gollum[at]zonnet.nl).
Thx in advance.
Regards Maarten

Hi,
I am still getting following errors...tried restarting all the services related to ADS including iiop.
An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while locating the document services trust manager:
java.lang.reflect.UndeclaredThrowableException#
An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while locating the document services trust manager base directory::
org.omg.CORBA.NO_IMPLEMENT: vmcid: 0x0 minor code: 0 completed: No#
Deepti

Similar Messages

Need Adobe Credential file for NW 2004s

Hi,
I have installed NW2004s Portal SneakPreview.
I want to work on Adobe Interactive forms, for this need to configure ADS.
But I got Adobe credential file, which is expired at 2007 itself.
Can anyone provide valid crendetial file for Adobe? or from where I can download latest file.
Thanks in Advance,
Venkat
Edited by: venkat on Mar 11, 2008 10:17 AM

Hello,
you can find this under:
https://www.sdn.sap.com/irj/sdn/nw-downloads
Best regards,
Dezso

Trying to register Adobe credential file...

Hello All -
I am receiving the following error in the Visual Admin:
error occured while indexing credential fles:
com.adobe.service.sap.configuration.ConfigurationException:An error occurred while indexing credential files.
In the default.trc file, I see:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while indexing the credential files:
 at com.adobe.service.sap.configuration.ConfigurationService.listCredentials(Unknown Source)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.adobe.service.sap.configuration.ConfigurationException: An error occurred while locating the document services trust manager base directory:
 at com.adobe.service.sap.configuration.ConfigurationService.getTrustDir(Unknown Source)
Is there a way to set/correct the setting for the "document services trust manager base directory"?
Also, I have looked at SAP Note 900945. This error states that the error only occurs in a clustered environment. But I have only one server.
Also, I did copy the pfx file to usr\sap\J2E\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials.
Any ideas?
Update:
I saw on a another forum post to make sure that the IIOP service is started on the dispatcher and server.
My dispatcher's IIOP service is not running, and when I start it I get an error.
The log file for VA shows:
Error while starting service IIOP Provider on cluster node with ID 2564300: Could not start service iiop on cluster ID 2564300; nested exception is:
 com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Service iiop error. Nested exception is: com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='ID019084: <Corba Service>: Can't open server socket.', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key ID019084: <Corba Service>: Can't open server socket.
 at com.sap.engine.services.iiop.dispatcher.CorbaServiceFrame.start(CorbaServiceFrame.java:116)
 at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
 at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
Any ideas on this?

Subrato -
Ha, you are pretty funny!
I would be happy to award you full points - if you can help me.
Maybe you could provide more detail about "have you selected adobe .jar file in configuration tab"? Is that in Vis Admin or ConfigTool? Where in whatever tool?
And what is that supposed to do to fix my problem (or diagnose it further)?
The line you told me to add in the "General" tab - what was that supposed to do or fix?
I still cannot start the IIOP service in the dispatcher.
Thank you for responding.

Zip files and Adobe Acrobat files

Hello all,
I have a couple of kinda distinct questions that I wanted to ask. I hope I've chosen the right sub-forum to post them in. My questions are
1) when I try to unzip a .zip file in my Documents folder I get the following error message
"Archive Utility - unable to unarchive "CdnEnergy.zip" into "Documents". (Error 1 - Operation not permitted.)"
ditto if I move it to the Desktop and try there. This doesn't seem to be a 'space' problem as my computer is very new and I haven't loaded it up with lots of stuff. I have unzipped this file before (admittedly not on a Mac).
2) How can I set Adobe Acrobat to be the default application for .pdf files so that when I click on a pdf file it's opened by Adobe Reader rather than the Mac Viewer? I know I can select Adobe with a Ctrl+click, but can I set it so that it's always the default?
Thanks very much for your help,
Eoghan

Welcome to the Discussions!
The first problem is not obvious, but I would suggest using Disk Utility to repair permissions. Also, you could download the free Stuffit Expander to have an alternate unzip program.
The second problem is easy. In the Finder, select a pdf file and then select File->Get Info. In the window that appears, select the Acrobat as the Open With application and select the option to always use this application.
bd

Opening and Adobe Illustrator file in Adobe Ideas

Iam a creative cloud member and I have an ipad. My friends told me to download Adobe ideas and that I could edit my drawings in this app Iam able to open the idea file in illustrator but not an illustrator file in Adobe ideas. How do I do this ???

Andres,
Maybe you can get help somewhere (else) over here:
http://forums.adobe.com/community/creative_cloud_touch_apps/adobe_ideas

Duplicated Flash and Adobe Reader Files cannot be removed -- Help!

I've just had the pleasure of reloading my XP home OS. A backup file was created. Now that all has been restored I cannot remove the CMAP folder and contents as well as the Flash folder and contents from the back-up folder...I've downloaded the Adobe removal tool, but it only works on installed versions...this is a copy or backup. I've contacted the Adobe Chat folks and been told to caugh up a fee...not happening
Following a thread earlier posted, I attempted to follow the long list of steps published by Adobe to claim ownership of the files, and change security settings, and then remove the duplicated files. The problem is, the "tabs" refered to do not exist as options when starting the process by right clicking on 'Properties'.
Can anyone lend a hand?? Many thanks in advance!

Adobe marks key files as their own, preventing moving, erasing, etc. XP Home does not offer the security tab feature to take ownership of the files, and then deal with them
After some serious efforts, I have now removed the duplicated files, and made sure my installation of XP Home has the necessary security tab features to see all files, and take ownership of those that have been placed by a provider wanting to insure as much security as possible.
Hopefully, this brief overview of the solution will be of help to someone.
Cheers

Indesign and Adobe Illustrator files?

I have double sided leaflet Ai file which I have created. I will be sending it for professional printing (3500 copies). There needs to be some tweaking that only Indesign can do. The question is what is the best way to get my Ai two artboard file into Indesign?

It's really not clear whether you understand your situation.
Ok I need to save AI docoumet as PDF and use InDesign Place command.
Or, you could just place the AI file, but in either case, when you do that, you'll essentially have a picture of your Illustrator layout on your InDesign page.
AI doesn't support wrap text for Photos but InDesign does. That was what I wanted to tweak!
If you've already set all the type in Illustrator, you won't be able to re-flow it in InDesign. You can't Place a completed layout from Illustrator, then edit it in InDesign. To use any of inDesign's features, you'd have to rebuild the layout on the InDesign page; placing the images and/or vector graphics as discreet elements, and then setting the type in a separate operation.

PSE 10 and Adobe pdf files not printing

I feel sure some of my settings must be incorrect. I have never had trouble until now. PSE 10 keeps pausing, screen dims and error message " not responding " appears. Also, trouble printing anything that is an Adobe document. All of this started happening at once, so I assume they are connected. Any ideas or could someone help me make sure my drivers, settings, etc... are correct?

Please try printing the same outside of PSE. Which OS are you on?
Does the issue happen for PSDs as well?
Thanks
Andaleeb

Spool files and Adobe Files in SAP

Hi,
Is there away to be able to see spool files and adobe pdf files , using the same screen, Ie go through and view some normal sap spools and then view adobe files from a url?
Many thanks

You can see this sample driver program which use ADOBE form.
You need to specify your function module name instead of (CALL FUNCTION '/1BCDWB/SM00000043') mentioned in this program. The function module is generated when you activate your Adobe form.
sample code :
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000043'
EXPORTING
/1bcdwb/docparams = docparams
is_customer = is_customer
it_bookings = it_bookings
IV_IMAGE_URL =
iv_sending_country = 'US'
IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Best Regards,
Devesh

Latest NW Sneakpreview SP16 and Adobe Interactive Forms

Hi there,
The installation of finished correctly.
But i got some problems:
1. The location to store the credential file("usr/SAP/J2E/SYS/global/AdobeDocumentServices/TrustManagerService/trust/credentials")is not created on the harddisk. I created it myself.
2. When i want to test if the ADS is correctly running (http://localhost:50000/AdobeDocumentServices/Config) i got an error. I found out that the service IIOP needs to run. After starting it manually and starting all the other "Document Services" manually it worked.
What the biggest problem right now is, that if i configure the service "Document Services Configuration" and i push the browse button to locate the credential file i get the following error:
com.adobe.service.sap.ConfigurationException:An error occured while indexing the credential files
com.adobe.service.sap.ConfigurationException:An error occured while locating the document trust manager
com.adobe.service.sap.ConfigurationException:An error occured unable to locate the document services trust manager
I hope somebody can help me to solve this problem.
Thx in advance.
Regards, Maarten

Hi,
I am still getting following errors...tried restarting all the services related to ADS including iiop.
An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while locating the document services trust manager:
java.lang.reflect.UndeclaredThrowableException#
An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while indexing the credential files:
com.adobe.service.sap.configuration.ConfigurationException: An error occurred while locating the document services trust manager base directory::
org.omg.CORBA.NO_IMPLEMENT: vmcid: 0x0 minor code: 0 completed: No#
Deepti

Image enduser workstation: question about ACF and Adobe Reader component

Our IT department is investigating what components should be included in the image for enduser workstations to ensure they will be able to work with interactive forms without any problem. I know ACF and Adobe Reader are the only requirements for endusers but I have some questions about this:
1. As of what version of Netweaver 2004s is it no longer a requirement to have the ACF component installed on the frontend to enable online interactive scenario's for endusers?
2. Can I recommend to allways install the very latest Adobe Reader version available in the market or is the Adobe Reader version depending on the SAP NetWeaver version we use?
kind regards
Angelique Heutinck
([email protected])

Hi Angelique,
The non ACF version is called Zero Client Installation (ZCI)
ERP2005 SP 5 - Zero Client Installation (ZCI)
NW04S Stack 08
Reader 8.0 for ZCI, Reader 7.08 for ACF based forms. Don't use Reader 8 for ACF yet, since there is no installer working yet...
Cheers,
Noë

How to Edit and Replace Psd Files in Adobe Flash - Help!

Hi Everyone,
I am new to flash and I am trying to build my first flash site using a flash template. I can use flash to edit certain components like header text, etc. But The content is impossible for me to change. I think that these are psd files, which I can open with gimp or another program and edit. I save and replace that file, but when I view movie again, the content is the same. I guess what I need to know is how to get these files back into my flash movie after I have edited them. Please help, I am no computer expert, but I am learning. A how to for dummies answer would be awesome.

Maybe You should try the Flash-forum:
http://forums.adobe.com/community/flash

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
== When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

Brilliant! Problem solved! Thanks so much.

With OSX10.7.5 and Adobe Reader 11.0.02 when I try to open a PDF downloaded from the web I get 'There was an error opening this document. This file is damaged and could not be repaired. Preview will not open either. Older PDFs OK.

I am running OS X 10.7.5 and Adobe Reader 11.0.02. In the last few days I have been unable to open PDF's downloaded from the web. Reader gives the error message 'There was an error opening this document. The file is damaged and could not be repaired'. Removing Reader and trying to use Preview to open these files give the error 'Preview cannot open this file. It may be damaged or use a file format that Preview doesn't recognise' (or something like that). Downloading the same files with Reader removed from my Mac Preview opens the files OK.
I was recently prompted to update Adobe software but did not note exactly what the update was nor when it was done.
Reader and Preview will both open PDFs I downloaded a week ago. Reader will also open files downloaded on another Mac running OS X 10.0.0 and copied to my Mac. Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

ACF Sneakpreview NW04 SP15 and Adobe Credential files SP15

Similar Messages

Maybe you are looking for