ACFS config error on ODA

Hi,
I have encountered an ACFS related issue. Since there is no ODA forum I believe this is the most appropriate forum.
Before raising any SR I am posting here as per My Oracle Support guidelines. I believe I have also exhaustively reviewed the the documentation, MOS KB and these forums looking for solutions.
I have been following MOS Note instructions to "Setup ACFS Post Deploy" [ID 1435019.1]
At step 5 I ran "/opt/oracle/oak/onecmd/GridInst.pl -s 22" as per the instructions, with the following result;
ERROR : Error in running /opt/oracle/oak/onecmd/tmp/asmcacreatevol.sh
Volume acfsvol created successfully.
Connected to an idle instance.
ASMCMD-8102: no connection to ASM; command requires ASM to run
I suspect some environment variables were not set since both "srvctl status asm" and "crsctl stat resource -t" indicate that ASM is running
There is nothing in the MOS note about setting environment variables.
Step 6 indicates that the filesystem is still not mounted ie. no result for "mount | grep cloudfs"
Running the command from the other node has the following result;
ERROR : Error in running /opt/oracle/oak/onecmd/tmp/asmcacreatevol.sh
Volume acfsvol creation failed with the following message:
Volume acfsvol already exists. Cannot be created again
The error above suggests to me that some manual intervention may be required.
I am both asking for troubleshooting input and doing the due diligence before creating an SR.
-cvdv
Edited by: cvdv on Feb 6, 2013 11:46 PM

Sebastian,
Thanks for confirming my ODA/support concerns.
Additionally I'll include your workaround/troubleshooting suggestions in the SR as they may prove helpful.
It's interesting that the volume was "created successfully" (via some shell based os command/utility?) whereas the next "idle instance" message indicates the script was possibly trying to perform a query or update when it failed/aborted.
I might make some time to check the /opt/oracle/oak/onecmd/tmp/asmcacreatevol.sh script to confirm my guesses.
Regardless you've answered my question, even if it does not solve the problem.
Cheers,
Craig

Similar Messages

  • Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

    Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1.  I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem.  Strangely enough  PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

    Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
    That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

  • Acrobat X Pro Config Error 130:11

    Hello,
    I've now un-installed & re-installed Acrobat X Pro a couple of times in order to get over the issue of Config Error 130:11 - which causes the application to quit (see link to original thread below).
    However, I cannot afford to do this continuously - where do I go from here?
    Thanks,
    Kieran
    http://forums.adobe.com/thread/1013013?tstart=30

    Hi there,
    The workaround we have right now is to:
    Launch any other CS6 product (such as Photoshop or InDesign)
    It will pop-up trial screen at launch.
    Click on License this software and restart subscription.
    Launch Acrobat X after this. It should launch fine
    Our engineering team is working on getting a permanent fix available for this issue.
    I'm sorry for the inconvenience!
    -David

  • Apple Outlook DAV Config error with Windows7; Any help?

    I have updated Windows7 and I have downloaded the icloud control panel.  I keep getting the Apple Outlook DAV Config error.  Any help?

    I encountered the same problem yesterday.  I have not found a solution but take a look at this thread. https://discussions.apple.com/thread/3377753?start=0&tstart=0  The conclusion (at that time) was a conflict between iClound and reoccurring appointments in Outlook.  The only solution:  delete all of your reoccurring appointments in outlook  (and stop using them going forward too?)........not very feasible for me.
    Let me know if you find anything.

  • Config error, account determ, group missing for paid by company exp.type

    Hi All,
    When I am adding an Expense type to an Expense report,I am getting the following error message:
    "Config error, account determ, group missing for paid by company exp.type"
    I have maintained the configuration in Business configuration>Fine tune activity>Expense reporting-US.
    I have maintained Expense Reimbursement Group as Z1(Customized) as well asExpense Account:-  but not maintained offsetting Account For  Paid Expenses.
    Please find the screenshot.
    Sincerely,
    Rajitha

    Dear All,
    SAP development has created a software correction related to the issue.
    Software correction is  deployed in customer systems on 25th August,2014.
    Sincerely,
    Manasa Anantapur

  • Url-template-config Error Deploying app in WLS9.1

    I am trying to deploy my application in WLS9.1 and using jdk1.5.0_08. I am getting url-template-config error. There is this file "url-template-config.xml"at
    \weblogic91\server\lib\consoleapp\webapp\WEB-INF which is where this error arises and inside that file the schema definition is:
    <url-template-config
    xmlns="http://www.bea.com/servers/weblogic/url-template-config/8.0"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.bea.com/servers/weblogic/url-template-config/8.0 url-template-config.xsd">
    Why is weblogic 9.1 using a 8.0 defined template and is this the main problem? Please do help me out.
    -Thanks

    Hi
    Did you get solution for url-template-config issue with weblogic 9.1 . Iam also getting the same error
    15:23:22,531 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR URLTemplateDescriptor:152
    - Exception while loading URL templates, /WEB-INF/url-template-config.xml
    Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismat
    ch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
    Stack Trace:
    javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected
    "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
    at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
    at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
    at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
    at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
    at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
    at javax.servlet.GenericServlet.init(GenericServlet.java:256)
    at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
    at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
    at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    Please let me knwo
    Thanks
    Binu

  • Startup config error after upgrading to ASA from PIX

    Hey guys.  I get the following startup-config errors when reloading our ASA.  A pix->asa conversion was just done on it.  The ASA is currently running 8.2(5), and I am trying to get ready to update it to the most stable release, and wanted to make sure all my ducks are in a row.  What is going on with the "will be identity translated for outbound"? This is part of the VPN configuration, and I understand nat0 is saying to not nat it.  Is this something that I should be worried about?  The ASA is not in production currently.
    Let me know if you need further information
    Thanks,
    .........nat 0 10.37.0.116 will be identity translated for outbound
    *** Output from config line 406, "nat (inside) 0 10.37.0.1..."
    nat 0 xx.xx.xx.xx (PUBLIC IP) will be identity translated for outbound
    *** Output from config line 431, "nat (inside) 0 xx.xx.xx..."
    Line 406
    nat (inside) 0 10.37.0.116 255.255.255.255
    Line 431
    nat (inside) 0 xx.xx.xx.xx (PUBLIC IP) 255.255.255.255
    Corresponding global
    nat (outside) 0 access-list outside_inbound_nat0_acl outside
    nat (inside) 0 access-list inside_outbound_nat0_acl
    ACL
    access-list outside_inbound_nat0_acl extended permit ip 172.16.16.0 255.255.255.0 any
    access-list inside_outbound_nat0_acl extended permit ip any 172.16.16.0 255.255.255.0
    access-list inside_outbound_nat0_acl extended permit ip 10.37.0.0 255.255.0.0 172.16.16.0 255.255.255.0
    access-list inside_outbound_nat0_acl extended permit ip 172.31.0.0 255.255.0.0 172.16.16.0 255.255.255.0

    Hi,
    I would imagine that there is no problem as the firewall has not given any kind of error message.
    I do personally wonder sometimes why is it so (atleast in the 8.2 softares etc) that the firewall shows a message on the CLI when you are for example configuring a "global" / "nat" command pair.
    I wonder if this falls into the same category.
    The configuration format for NAT has stayed pretty same leading to the 8.2 softwares. I'm not totally sure what software you are going to go for but you seem to have the latest 8.2 series software so next steps are already 8.3 / 8.4 / 9.0 / 9.1
    ALL of the above mentioned softwares introduce a completely new NAT configuration format to the ASA. While the ASA automatically converts the configurations its not always 100% process not to mention that the NAT configuration probably is far from optimal.
    - Jouni

  • Help with Acrobat X Pro Config Error

    Hello, I'm looking for some assistance with Config Error 130:11 on Acrobat X Pro running on Windows 7.
    The message reads:
    A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
    Error: 130:11
    I'm using the subscription service for CS6.
    Help appreciated!
    Kieran

    Hi Sandeep,
    Thanks for your response.
    Acrobat Reader had been installed on the machine, but not an earlier version of Acrobat - it's a new machine, but I installed CS5 Design Standard before subscribing to CS6.
    Since my CS5 software was an upgrade (as was CS4 - I had been asked to re-enter the CS4 serial number), I think the Acrobat software was never fully installed prior to the CS6 download.
    The permissions for SLStore were:
    System & Administrator - Full Control
    Creator Owner - Special
    Users - Read & Execute
    Users - Speical
    The permissions for Adobe PCD & caps were:
    Administrator - Full Control
    Everyone - Read
    When the Adobe PCD & caps folders were moved to the Desktop & the Acrobat X Pro re-launched, I received an Error: 6 response:
    Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support... etc
    I assume this is my next step?
    Many thanks,
    Kieran

  • AI Group Config Error 10001 using Virtual Channels

    In my LabVIEW block diagram, I usually enter in numbers, e.g. 0,1,2 for the channel string input of AI Config. When I try to use a virtual channel, I simply type in the virtual channel, e.g. 0,K Thermocouple,2. However, this causes AI Group Config Error 10001, which applies to an invalid channel string. What is the correct way to enter a virtual channel into the channel string?

    Do you have channels with virtual names of "0", and "2"?
    If not you may be confusing MAX by using both naming conventions.
    Try using only Virtual names.
    I generally will use an array of strings where each element is the vitual channel name with no problems.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Indesign CC 2014 config error 5

    Hi there, need help fixing an issue i'm having with indesign CC 2014 coming up with config error 5 when i try to open up the program (not a file). I have tried uninstalling and reinstalling several times, deleting preferences and even reverting back to Indesign CC. Same thing happens everytime. Any ideas?

    Nevermind. I just saw the screenshot.
    I don’t have my Mac open right now but on Windows here’s the folder you need to look at: C:\Program Files\Adobe\Adobe InDesign CC 2014\Scripts
    Make sure that none of the CC extension scripts got moved there. If they did, move them back to the CC folder.

  • Parameter.config error

    Hai,
    iam getting the error parameter.config could not be located or read in apache webserver,forms and reports webserver when i start the applications.i was asked to do the following
    update the value for the guest user end date to null
    but i checked the value for end date column for guest user.it was already set to null.
    what is the reason iam getting the same error paramter.config could not be located or read .wat else can i do to solve the error.
    Iam a fresher.so help me to solve the error.iam analysing this issue for a long time but i couldnot get a proper solution.
    Regards
    orauser123

    Hi;
    >
    update the value for the guest user end date to null
    but i checked the value for end date column for guest user.it was already set to null.
    what is the reason iam getting the same error paramter.config could not be located or read .wat else can i do to solve the error.Plz follow those notes and see its helpful:
    Cannot Read Value From Field Parameter.Config Error When Starting/Stopping Apache  Doc ID:  298143.1
    adstrtall.sh is failing with error 'Cannot read value from field PARAMETER.CONFIG'   Doc ID:  356434.1
    Regards;
    Helios

  • Port config error

    Hello,
    Our laptop is communicating with a Eurotherm 818 temperature control unit through the serial port. The program (Labview 7.1) uses VI's downloaded from the web, i.e. EI BYSINCH Read.vi and EI BYSINCH Write.vi, and obtains temperature and power measurements from the Eurotherm in real time. MAX says serial port is working properly. OS = Windows XP
    PROBLEM: After around 2.5 hours (fairly consistently), the "Port 0 Config Error" occurs, and the program cannot be continued. I have determined that the error originates in the "Open Serial Driver.vi" which is a subvi in "Serial Port Init.vi", which in turn is a subvi in "Lab Serial Port Init.vi". (The first two vi's are Labview library files).
    ATTEMPTS TO FIX: I have viewed a thread with a similar problem http://forums.ni.com/ni/board/message?board.id=170&message.id=76152&query.id=21947 for advice. I found the error handler and have tried creating loops to retry opening the driver, as well as closing it and then trying to open it again - with no success, i.e. Internal Error occurs. I have also been experimenting with the "force re-open" control in the "Open Serial Driver.vi", with no success as of yet.
    Any ideas on solving this issue would be greatly appreciated.
    Thanks very much,
    Ian

    Ian,
    Sounds like your program is not structured the way I like to interface the serial port.  There should be one call to serial init.  After the serial port is open save the reference and use it to read and write the serial port.  When the program is complete call serial close once.  This will take care of the issue.  I have serial devices that I talk to for months at a time.  Yes, months using Windows XP.
    Matt
    Matthew Fitzsimons
    Certified LabVIEW Architect
    LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

  • AO Group COnfig Error

    I have created a sine and a square waveform according to the user requirements but when i write the two waves to the AO generate waveforms i get an error saying AO config error. I have also configured the input channels using AI config and other input SUb vi's. I dont knwo what to do.

    Vaidehi,
    Are you using LabView 7.0 or newer (with DAQmx) or are you using an older version of LabView that only has the Traditional DAQ? Either way, there are several examples of analog waveform output included in LV. You can find them in the help menu under "Find Examples."
    You coud get the AO config error for several different reasons. Its very hard to tell what it is without having the code. Are you doing simultaneous AI and AO? There is a shipping example for that also.
    If you can't get this solved using the shipping examples please feel free to respond to this with your code attatched. It may give me some insight into whats going on.
    -Sal

  • Mail / Cyrus Config Error -- Please help!

    Dang, I have yet to get an answer on anything through this site!!!
    Setting up Leopard Server 10.5. Have core services all running successfully, but stumbling on e-mail.
    Machine is broadway.local. Main domain is dsop.com, but I don't think that is major issue here. (It is config'd as a virtual domain and users can login.)
    Through POP or IMAP, users can authenticate. But they cannot access mail. As example, IMAP log shows...
    Nov 11 10:34:16 broadway imap[318]: login: localhost [::1] jbritton plaintext user logged in
    Nov 11 10:34:16 broadway imap[318]: IOERROR: opening /var/spool/imap/user/jbritton/cyrus.header: No such file or directory
    If I use terminal to go to /var/spool/imap/user/jbritton, I see...
    sh-3.2# ls -la
    total 0
    drwx------ 5 _cyrus mail 170 Nov 10 18:55 .
    drwx------ 3 _cyrus mail 102 Nov 10 18:55 ..
    drwx------ 5 _cyrus mail 170 Nov 10 18:55 Deleted Messages
    drwx------ 5 _cyrus mail 170 Nov 10 18:55 Drafts
    drwx------ 7 _cyrus mail 238 Nov 10 21:23 Sent Messages
    I have web mail configured and working. On login, InBox shows...
    ERROR: Could not complete request.
    Query: SELECT "INBOX"
    Reason Given: System I/O error
    If I switch to draft, I can compose a message and logs show that it is sending. (I am waiting on someone (anyone) to call to tell me they got it!)
    Start/stop of mail, as well as reboot of server, have not helped.
    I have limited UNIX knowledge, though I am in IT by trade. So take the middle road on tech explanations, please. I can temporarily be reached at [email protected]
    Any ideas?

    Though I can't say that this is your issue, but I would check the permissions on the folders. The _cyrus user should be the owner of all the folders inside the "user" folder.
    I would also try to do a complete reconstruct on the mailboxes. You can either use.
    mailbfr: found at the link below.
    http://osx.topicdesk.com/content/view/41/41/
    Or you can attempt to use this:
    http://docs.info.apple.com/article.html?artnum=107996
    But modify the user name cyrusimap with _cyrus.
    reconstructing mailboxes should create the cyrus.header and other cyrus.* files in the mailbox folders.
    I find that mailbfr works pretty good and they say it has support for 10.5
    Chad

  • AirPort Utility 5.4.1 reading AEBSn config error -6728

    While in the process of updating the firmware (7.3.2 to 7.4.1) of one of my Airport Extreme N base stations (gig edition), I keep running into the following pop-up error message when I try to access the base station via Manual Setup. After about 37 seconds "Reading the AirPort Extreme configuration...":
    "An error occurred while reading the configuration. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6728)"
    Alternatively, when I try to update the firmware via the Update Firmware button, after it asks for the base station password, it says "Searching for latest firmware version..." and the progress bar spirals forever ( > 10 minutes). I must quit AirPort Utility to stop this endless "searching."
    I have updated several other AirPort Extreme and Express N base stations in my network without running into the problems above (no problems accessing base station configs, and firmware downloaded and installed immediately), so it appears this particular base station is not fully cooperating with AirPort Utility. However this base station is still functioning within my wireless network, providing access in Finder to an attached USB drive and serving as the main base among several other Extremes in an Extended network.
    I have tried through AirPort Utiliy:
    Base Station -> Identify... THIS WORKS
    Base Station -> Restart... THIS WORKS
    Base Station -> Upload Firmware... -6728 error
    I have also unplugged the unit to force it to cold boot. No success getting into configuration.
    The MacBook Pro from which I am running AirPort Utility 541.9 is connected directly via ethernet to a LAN port of this AirPort Extreme (the laptop's internal wifi disabled to prevent multi IP conflicts). The AirPort Extreme WAN port is connected via ethernet directly to my router. There is confirmed Internet connectivity, and per my router each device has its own unique IP address.
    So:
    1. What does "error (-6728)" mean specifically?
    2. How do I regain access to this base station, so that I can get into its configuration and do a firmware update?

    Thanks Sascha H-K. Your suggestion worked!
    I removed AU 5.4.1.
    I downloaded and installed AU 5.3.2.
    THEN, running AU 5.3.2, I was able to enter the manual setup configuration of my stalwart AirPort Extreme base that would not respond to AU 5.4.1.
    From there I was able to update the base station firmware to 7.4.1.
    I noticed that when running AU 5.3.2, all the updated 7.4.1 base stations do not appear in Wireless Clients in Base Station -> Logs and Statistics. (Running AU 5.4.1 solves that problem.)
    Now, I am back to running AirPort Utility 5.4.1, and I am able to access manual setup configurations for all my base stations.
    It's weird this method worked. But I'm glad I didn't have to force a hard reset on the base station and lose all my network settings, bringing down the whole network since it was the main base station that didn't respond.

Maybe you are looking for

  • Table : Production Order in the sales order

    Hi, When can we found in the tables of the sales order the link to the PO numer. And, In which field screen in the sales order document we can find the order number. Thanks for yur quick answer.

  • CALL METHOD cl_gui_frontend_services= file_save_dialog

    Hi, I want to use 'CALL METHOD cl_gui_frontend_services=>file_save_dialog', to choose a path for saving my txt files.  I only want the user to be able to choose the path and not have to supply a filename aswell.  My filenames are standard in the prog

  • Quicktime 7.5 wont play in safari

    I have just updated to version 7.5 in Quicktime using my Macbook Pro and now unable to watch, for example the keynote address by Steve Jobs at the WWDC. Fortunately the update came thru while I was watching the address on my iMac G5 still running Q/T

  • BAPI or FM for settlement rule

    Has anybody an idea how to cretate/update/delete the settlement rules of a production order via BAPI or FM? Thanks Raadha

  • Apache 1.3.12 And Apach-weblogic plug-in

    Hi, I am trying to use the Apache-weblogic server plug-in with Apache1.3.12. I don't seem to be getting anywhere. Has someone tried it? I followed the apache-bridge.html instruction but still couldn't get it to work. If someone has already tried it a