Achitecture Not Supported and CPU Extension SSE2 issue. Are there any solutions??
I'm late to the game.
I purchased the CS3 Adobe Master Collection, I get and error that Adobe Premier and Soundbooth wont work with my "architecture".
I thought I had to upgrade to OS10.5 thinking that was the issue.
But now I find that it's not software at all...but Hardware.
The install screen states "Support for CPU extension SSE2" is not met.
And I searched the web for help, and ALL signs point "not being compatible with G5 PPC.
Is this still true? Is there really *nothing* I can do but BUY a new Mac with Intel to run them?
Is Adobe REALLY turning their backs on people without new Intel Macs?
PLEASE tell me there are patches and some work-arounds by now!
If your CPU does not support the command set needed to run the program... it will not run... no patches, since that hardware support is a key part of the software
You see it as Adobe turning away... Adobe (I don't work for them) sees it as a minimum hardware requirement
Similar Messages
-
Support for CPU extension SSE2 problem, please help
hey guys,
I recently got a PowerBook G4, and I'm trying to install the trial version of PPRO CS3 to give it a test run. And it gives me a message saying "Support for CPU extension SSE2" I read up on this and found out you need an INTEL MAC, which is ridiculous! for those of us with a G4, G5 system.
Does anyone know of any way to bypass this system requirement and still install/run PPROCS3 on a non-intel mac.
Thanks!Wait... water car idea
Connect to a really LONG extension cord, or use a really BIG battery, to power electrodes to separate water into hydrogen and oxygen
Burn the hydrogen with the oxygen in the engine... but I'm not sure about the net gain of hydrogen burning versus the electricity needed to power the electrodes -
I do not use this often, once every three months, and I do not want to pay extra monthly fees - are there any options?
Hi Anthony,
You can purchase month to month plan, which you can cancel any time.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Kindly check the cancellation terms as well.
Adobe - Subscription Terms
Thanks,
Atul Saini -
I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?
Ok ...
Try troubleshooting extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here. -
I have my tabs seperated into several groups (for example, bank tabs, music tabs, social life tabs and so on). I do this with the help of the button in the top left corner. While I was surfing the internet, I accidentaly opened a site not in a new tab (as I usually do), but in a new window. The new window was without all the grouped tabs, which I had in the previous Firefox window. And then I accidentaly closed the Firefox window with all my grouped tabs. Now I can't recover it. Are there any solutions?
Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal -
I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?
Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion -
For this issue Is there any solution in Standard solution or any Developmet
Hello Friends,
I have one issue that is
When ever the forecast is release from DP to PPDS (Monthly - days) of a material quantities should be bucketed into Monthly bucketed quantities and split into day level ( e.g: Product1 1st week 1000ton, 3rd week 2000ton , when it releases system aggregates the quantities and depending upon the product profile and setup time it shold give me result as product1 -3000ton in day 1 and product2 --2000ton on day 2 ...so on) .Standard SAP APO release of Monthly forecast quantity to daily bucket is divided into 30 or 31 days and split the quantities equally( e.g: Product1 1st week 1000ton, 3rd week 2000ton , when it releases system aggregates the quantities and divides in 30 days in a month and split the quantities equally).
For this issue Is there any solution in Standard SAP or any Developmet is required in APO-DP.
Pl Through me some lights on me .
Regards,
sivaram76.Hi
If you are using u201C/SAPAPO/MC90 for releasing the FCST , I think you can define different Planning Buckets Profiles according your requirement for example according your needs for disaggregation of your FCST. A planning buckets profile contains the periodicities or a subset of the periodicities that you defined in the storage buckets profile.
Once you maintain the planning bucket profile you can put it in tab Daily Buckets Profile while releasing the FCST.
It will be nice if you please cross check it its meet you requirement.
Thanks
Amol -
i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!
Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian -
The camera on my iPhone 4 isn't working and hasn't for quite sometime. I have updated the phone to IOS 6 and it hasn't made any difference.
When you use the icon that appears at the bottom of the screen or the camera icon on the main screen all you see is the camera shutter.I have tried to restore the camera and that hasn't made any difference. I have spoken to Apple support and they sent me a support site to check out, but there isn't any specific solution for my problem. Has anyone had a similar problem and is there a solution?Try:
- Reset the iPhone. Nothing will be lost
Reset iPhone: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPhone.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I would like to make an album at my Ipad. The first pictures I transfered, did get into "pictures", and I could make a photo album. Later I did get them into streamed areas, but they did not get any ways to make an album. They did not apply to "pictures", and when I make an album and tries to import the pictures, the streamed pictures do not show up. What can be done?
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom -
please help
Try moving the existing backup file to a save location and try again. It is located here:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ -
Is anyone else experiencing the same issue? I've reset the phone, removed the battery, etc. and can't get the 4G signal to display. Only showing 3G even when I know there is 4G available
Kinquana -
Definitely see a difference with data.
My wife has a Samsung Galaxy Note 4 that displays 4g service >99.5% all of
the time.
Her access to the internet is much quicker than mine.
Based on what I'm seeing, I'm wondering even if my phone is setup for 4G.
Checked my Mobile networks setting vs what see has on her phone and they are
exactly the same.
Only thing different is in the APN type:
Note 4 - default,dun,supl
Galaxy SIII- default,dun (appears that I can't change this)
Her signal strength is (-101dBm 39asu) vs mine (-85dBm 2 asu)
Ken -
When I check my yahoo mail, a lot of times emails will disappear, or I will click on one to read, and it will open one that is above it. Also there are times when I am on a page, and a yahoo search page will open saying page could not be found, and it wasnt even something I was doing.
You have Adware installed. Click the Firefox button, go to Add-ons | Plugins and disable '''My Web Search'''. See http://en.wikipedia.org/wiki/My_web_search
Also, update Firefox to the latest version which is 4.0.1 by clicking Help | About Firefox | Check For Updates button.
In addition, update Adobe Flash via http://get.adobe.com/flashplayer/
Here's the Adobe security advisory for Flash: http://www.adobe.com/support/security/bulletins/apsb11-12.html -
Has anyone found a successful method to connect? This is not a router issue as other devices, including another iPad not updated to ios 5 connects just fine. I am getting frustrated
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
I recently purchased Adobe Premiere Pro CS3 for my PowerBook, and it will not install because I need "support for CPU extension SSE2". Is there an upgrade I can install, or do I need a newer CPU to run this software? I am not very familiar with it, and nothing came up when I ran a search on the Apple web site.
-RobAdobe says Premiere Pro CS3 will run on Intel CPU:
http://www.adobe.com/products/premiere/systemreqs/
"..Multicore Intel® processor (Adobe® OnLocation™ CS3 is a Windows application that may be used on Macintosh using Boot Camp and Windows, sold separately).."
PowerBook 17" has Power PC CPU, not an Intel one.
Maybe you are looking for
-
Like the title, It turned black when I rotated the Music screen horizontally, and it turned back to normal when I rotated it vertically. Please help me...I tried restored it again, but the problem remains.
-
How to know Sales Organization and distribution channel for a material
How to know Sales Organization and distribution channel for a created material
-
Systems Engineer in Dallas, TX
VI Technology is an industry leader in developing automated test and enterprise data management solutions. We provide solutions to many companies in industries like semiconductor, consumer electronics and defense to name a few. We are a certified Mic
-
Uccx demo license disappears after reboot
hi. im trying to install uccx 8.5 in vmware for lab purposes. when i install the demo license included in the DVD, it works out fine. however when i reload the VM and try to log back to uccx, it says that there is no license installed. when i try to
-
Flexible content lengths in form fields - how?
Hi everyone, I am new at this Designer tool and need help regarding flexible contents inside form fields. 1. Inside my pattern-form there are fields for customer/product-contents which VARY their size. --> Example: If field #a gets a size of 20 lines