Ack! AU plugins won't work on Intel Macs!

I know this is already known, but does anyone know what to do about the fact that all our old AUs won't work on Intel Macs? I just got a new mini and wanted to use the good old C3 compressor and it wasn't there, even though I had installed it in the usual place.
I'm not even gonna bother trying to add Guitar Rig 2 until I hear that it works.
Any news on new ports of C3? Or any new Intel-compatible AUs?

Hi chris,
You need to check all the sites where you got your plugins to see if they are Intel ready (most should be in the next couple of months).
Check out this thread for a bunch of free plugs too (some of wich are Intel Compatible). Thanks go to Warrior Ant for the VAST majority of these posts.
http://discussions.apple.com/thread.jspa?threadID=378467&tstart=0

Similar Messages

RealPlayer Safari plugin won't work on Intel core duo iMac 20"

Real Player Safari plug in won't work on Intel coreduo iMac 20" to either listen to audi or to play video and I don't know whether it is a Safari issue, Rosetta issue, RealPlayer issue or all of the above. I am also concerned about asking Safari to run under Rosetta becasue this seems to defeat the point of getting the latest machine. Does anyone know what the problem is and the likely timescales for a fix? Thanks. John
PS. I am able to access the resources I want using stand alone RealPlayer and Firefox.
2GHz iMacCD 20" 2Gb RAM Mac OS X (10.4)
1.25GHz iMac flat panel round bottom Mac OS X (10.4.6)

Hello, this happens because Power-PC-plugins usually can't cooperate with Intel-coded programs. I've experienced the same mess with the famous GraphicConverter and TWAIN plugins from Epson. Until Real will not offer Universal-coded plugins, you have to use the Rosetta-bridge with PPC program versions. In such case I generally prefer the FireFox browser.

Which software won't work on Intel Macs?

Hi,
I wonder if you would know of a list of program versions and compatibillity with the new Intel based Macs.
Thanks in advance!

Anything that needs to run under classic won't run.
I had to upgrade or drop the main apps a long time ago due to the peripheric support issues in Classic. However, even if I have not read it through, there is an interesting article on how to run Classic apps on Intel Macs with emulation. Could be interesting for some.
http://www.atpm.com/12.09/classic.shtml

CS5 won't work on Intel Mac.

Hello,
I am a first time poster on the forum. I just purchased the CS5 update after carefully reading the system requirments and updating my OS to 10.5.8 as required. I am using a Mac G5 with an Intel dual core processor. The CS5 update gives me an error code 6 everytime I try to install it and it locks up when I try to use the type tool and other features. I have spent many hours with Adobe tech support with no solution. Now they tell me that I cannot install it on a G5 . Has anyone else had this issue? Am I stuck with a $200.00 loss ($400 with the os update) ? They should state this issue in the system requirements!
Thanks,
Charles

regnilham wrote:
The only other software on this machine is Canon Digital Photo Professional for my cameras.
You just installed CS5 and DPP on top of a clean OS install. (not a clone from another machine) Did you run software update for OsX and for Photoshop?
No third party fonts, no plug-ins, nothing else?
regnilham wrote:
The Adobe help people have run the cleaninig scripts and we have reinstalled and deinstalled many times.
Did they remotely connect to your machine?

Java Plugin won't work in Netscape 7.1

I'm using Windows XP Home with Netscape 7.1, and the Java plugin won't work.
Java Plug-in 1.4.2_05 for Netscape Navigator (DLL Helper) is listed 7 times in Help>About:Plugins;
The Java Plugin works in Internet Explorer (I use the Test Java Virtual Machine to determine this). With Netscape, I just get the "Click here to get the plugin" window, and believe me, I've clicked here many times, and gone through the installation process, and it still doesn't work. I've uninstalled Java, rebooted, and installed it with the browsers closed, and it still doesn't work. Everything else in Netscape seems to be working properly.
Under Edit>Preferences>Advanced in Netscape I have "Enable Java" checked.
I posted this problem in the Windows-BBS Netscape and Mozilla forum, http://www.windowsbbs.com/showthread.php?t=33994, and tried everything suggested there, but it still didn't work.
Anybody have any suggestions?

I was facing a similar problem. I think the problem is with different versions of JRE. For example, I was trying to associate with Netscape the JRE version of 1.4.2_01 without any success. But on associating jdk version 1.4.2_05, it started working fine.
Regards,
Harish

Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro

Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro
I'm outputting a Mac projector file that will work on my mac computer. However, when I upload it to FTP and download it my mac or another mac, it won't work! What's going on? I've tried adding ".app" to my file and it still won't work. Help!
Here's my set up: Flash 8 Pro on Mac Intel with Mac OS 10.4.11

Hi,
Does it work if you .zip up the projector and FTP the .zip and then unzip the projector on the other Mac's? A projector is basically an application. Applications in Mac's have package contents and resource bundles. When copying files over the network on Mac's, symbolic links inside the package contents and bundles can get messed up.
Thanks,
Nivesh

I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

You run Windows in Parallels or Fusion. Then in Windows you install the program.

.avi animations made with Flash won't work on my mac laptop (version 10.6.8) ...

.avi animations made with Flash won't work on my mac laptop (version 10.6.8) but they used to. What is the problem?

let me be more specific, the .avi animations will not play in Quicktime on this laptop, but they used to. When I import them into final cut express they won't show up there either. What should I do to fix this?

My Magic Trackpad won't work on my Mac Mini?

My Magic Trackpad won't work on my Mac Mini? The cursor moves a little and then will not respond at all. Gestures do not work

Yes, it's one of the things that can interfere. Here are some others including airport. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
http://support.apple.com/kb/HT1365
Captfred

Since upgrading to yosemite my sky email account won't work on my mac although it works on my iPad

since upgrading to yosemite my sky email account won't work on my mac although it works on my iPad

Mail troubleshooting - Yosemite
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

My Canon LIDE 600f won't work on my Mac Lion

I've downloaded a driver from Canon, and at someone else's suggetsion, a Canon toolbox, but: My Canon Scanner LIDE 600f won't work on my Mac Lion. Any ideas?

With the scanner driver installed and the scanner connected to the Mac, if you open System Preferences > Print & Scan, is the scanner shown in the list of devices? If not, are you able to add the scanner?
And if you open Image Capture located in Applications, does this show the 600F in its list and peform a scan if selected?

Flash is up-to-date, but Plugin won't work

Hi!
I'm using Firefox 29.0.1 on Windows 8, (also up-to-date), and Flash plug-in won't work. I re-downloaded & installed Adobe Flash 13.0.0.214...I verified it on their website, but I can't get the plugin to work. I had no problem with it earlier today, but for some reason it won't work anymore.
PLEASE HELP!
Thank you,
Nuts4Mutts :(

Hi!
Yes, I checked on Adobe's site THREE TIMES & I have the latest version, & the animations they have on their site worked fine...I saw them perfectly, (both the red cube bouncing around & the cartoon tree with the animated yellow & orange colored leaves). I'm at a loss why on most sites I have no problem watching streaming video, but on 2 of the other sites that I watch EVERY day, I suddenly get the "Error loading plugin" message on a black screen. It's driving me nuts, as I was watching these sites earlier this morning & everything was fine. The confusing part, to me at least, is why is this plug-in problem is ONLY affecting 2 of the sites I watch AND why did it happen out of the blue...I was watching them without any problem early this morning, just like I do ALL DAY...EVERY DAY!!! (I watch several wildlife live-cams, so it's important that I keep up with changes in the birds I normally watch). None of the other sites I watch are affected...what would cause this to happen?
I even did a complete shut-down of my laptop, waited, then re-started. Usually, this would fix just about anything...for some reason, I can't get the video stream on 2 cams...I can still view the other cams I watch, though.
I DID install MS's weekly updates, but it didn't affect my ability to see streaming video on most of the sites I watch; so far only on 2 of them.
I only have the pop-up blocker that comes with Firefox, but other than that there's nothing else in my add-ons that could interfere. I checked my plugins several times, just to make sure Flash was up-to-date & they're fine, too. The mystery is why I can see my wildlife cams on 4 of the sites I watch but not on the other 2, especially when I was watching them early this morning!!! I feel like I've been dropped-off in some sort of cyber-space time warp, or in the twilight zone & I'm ready to scream!
If there are any other suggestions, please post them...I'm very behind in my cam-watching!
On another Firefox-related problem...where do I post a question about some add-ons not working or being visible AND not being able to customize since the last update? I know...I'm just having a very confusing, frustrating day!
Thanks again for your ideas...I need all the help I can get!
Nuts4Mutts :(

Java plugin won't work in Chrome

Java won't work in Chrome. I have OSX 10.7 on my Macbook Pro, and when I try to update Java, a popup alert is served that the update is only going to work for OSX 10.6. It would be really, really helpful to be able to use Java in my browsers. Any insight as to how I can get it to do that?

Do you have Java enabled in Safari:
Clinton

WMP Plugin Won't Work Behind University Firewall

Hey people, I'm working behind a university firewall that blocks everything except http and https at the moment. I can't get any of my streaming audio to work when it loads in the Windows Media Player plugin, but streams work fine when I'm using Quicktime or Flash plugins.
My question is, is there a way to choose Quicktime as the default plugin? I mean, I know most of my streams will work on either WMP or QT, but most go straight to WMP. WMP streams work fine on other people's windows machines, which just annoys me more. Any suggestions?

Hello Stephen:
Many (including me) use a free download called "Flip4Mac." That plug in permits WMP files to be played in Quicktime. In fact, Microsoft has dropped support for WMP on Macs and, as I recall, actually provided a link to Flip4Mac.
Barry

TUTORIAL: How to make PPC Plug-Ins work on Intel Macs!

Hi guys, I wanted to share this brillant method with you all, collect ideas and create a list of Plug-Ins, you have succeeded to make work (I guess nearly all PPc Plugs will work this way but lets better stick to facts). Maybe there is a way to work with more than 1 Plug - Feel free to report and contribute! Kudos goes to a dear friend of mine... Let' share some power...
"I noticed some people complaining about not being able to use Trilogy and Atmosphere on Intel Macs. There's a tricky way to do it that takes about ten minutes to set up the first time and after that is easy. It probably works for other PPC-only instruments as well.
Here's the outline: OSX for Intel contains a layer called Rosetta, which runs PPC software that hasn't been updated. (You might run Microsoft Word via Rosetta and not even know it.) In general, Rosetta is no good for audio software: you can't use it for a sequencer or a recording application. But it's good enough for a lightweight plugin host like Rax, which does nothing but serve as a host for Atmosphere. So you can load Atmosphere into Rax via Rosetta, then run it alongside a UB sequencer like Live or Logic.
The only tricky part is connecting the two together. You need to get MIDI out of your sequencer and into Rax, and you need to get audio out of Rax and back into the sequencer. The MIDI can go via an internal IAC bus. The audio can go via the handy freeware audio-routing utility Soundflower.
Here's how to set up:
-- download Rax version 1.2.3. (Version 2 and up won't work.) You can find it at http://macmusic.org/software/view.php?id=395 . Use the serial in SerialBox to install.
-- download and install Soundflower from http://www.cycling74.com/downloads/soundflower
-- in Audio MIDI Setup, create a new IAC bus. Instructions on how to do this are at http://www.spectrasonics.net/news/Creating-an-IAC-Bus.html . Name it Rhino. (You can name it whatever you want, but in these instructions I'm going to call it Rhino.)
Now you're ready to go.
-- Open your sequencer and create a MIDI track and an audio track. Set the MIDI track's output to Rhino. Set the audio track's input to Soundflower 2ch.
-- Open Rax and load Atmosphere. In the Preferences, go to the Audio tab and set Audio Device to Soundflower 2ch. Now go to the MIDI tab and, under MIDI Inputs, make sure Rhino is the only thing checked.
You should now be able to send MIDI from your sequencer to Atmosphere, and then hear the audio through the sequencer. One last stage is to sync Atmosphere to your sequencer's MIDI clock, so that tempo-synched effects will work properly.
-- Still in Rax Preferences, on the MIDI tab, set the MIDI Clock dropdown menu to Rhino. Close the Preferences window. At the top of the main Rax window, make sure the Ext. Sync box is checked. The Tempo window should say 0, which means Rax is following the sequencer's master tempo.
And you're done. Save the Rax document and you can open Atmosphere with a single click. Trilogy works the exact same way, obviously.
If you want to use multiple instruments from Rax, you'll need to use SoundFlower 16ch and send MIDI on a different MIDI channel for each instrument (using the same IAC bus).
Anyone who's tried this, please post your results in this thread. Especially, try out other PPC instruments, and try using multiple instruments at the same time, and let us know how it works for you."
Maybe one of the Admins wants to sticky this
With my very best,
Vic.

There's another shortcut I've used successfully in order to access 'old' PlugIns on an Intel MBP :
Just use Logic 6 - and take full advantage o' that ole rotatin' rosetta
Meaning : Other than with native Logic versions 7 and 8, Logic 6 has to be fully emulated by the rosetta engine, and if your intel mac is fast enough, it does so very well - thus including all PPC PlugIns you still may have installed. Also works fine for PlugIns that were converted via FXpansion's VST-AU manager.

Ack! AU plugins won't work on Intel Macs!

Similar Messages

Maybe you are looking for