Acknowledg​ement for thanks to WSN Team and Developer Platform users

Its my acknowledgement email for the precious support and guidance that WSN support team and Developer Platform users provided me through out my MS thesis and today i have succesfully defended my thesis on "Convergence of mobile phones and wireless sensor netwroks" i used labview for developing Host PC and Real-Time target applications that made use of ZigBee WSN VIs. If any one requires help on this topic he is most welcomed for my advises.
Once again thanks to all. I will stay in touch as i am regular user of LabVIEW for developing Test Applocations.
Best Regads
awais qureshi
+923005178180

Hi Awais Qureshi,
I'm glad National Instruments was able to help!
Have a great day,
Chris V
Applications Engineer
National Instruments

Similar Messages

  • Big thumbs up for the forum moderation team and of...

    Can I just say if I hadn't of found this forum I feel that I would just be going round in circles all the time wasting BT's money on callout charges etc.
    The team on this site are phenomenal and deserve recognition in every aspect. They are very polite , quick to act and listen to what you have to say and I welcome that as a customer.
    Also thanks to the mods and Kerry we have had the fup raised higher for unlimited users by three times the amount it was before and option 2 of the BB package raised by double this just shows that they listen and act and for that I am very grateful.
    Cheers guys your hard work doesn't go unnoticed big thumbs up from me.

    I too would like to say a big thanks to the mod team - and especially Patrick Boyle, for helping resolve an issue for me. Well done, it is nice to see those green "solved" baloons popping up too.

  • API for Purchasing iTunes gift card and Transferring to user

    Hi,
    Is there a way to Purchasing iTunes gift card and Transferring to user?
    Is there are any SDK or API is available for Purchasing iTunes gift card and it returns code which is useful for redeem product?
    Or credit an iTunes account?
    Thanks!
    Krtya Softwares

    This forum is for questions about iTunes U, you will be better off asking in the developer forums : https://devforums.apple.com/index.jspa

  • Recent Software Update - Recommended for FCP X, Motion 5 and Compressor 4 Users

    There is a recent Software Update ("ProApps Quicktime Codecs") that is recommended for the FCP X, Motion 5 and Compressor 4.  Should FCP 7/FCS 3 Users download this update as well, or avoid to prevent any conflicts?

    I have one boot drive with 10.6.8 and FCS 3, and a 2nd boot drive with 10.9 and the FCP X Trial - best to avoid any problems.  Everything is smooth as glass at the moment.

  • Photoshop Touch SDK and development platform

    The photoshop touch SDK announcement is very exciting, however I own a CS5 windows license and of course I do my ipad/ipod development on Mac: given that unfortunately photoshop licenses are not cross-platform I was wondering if there is/will be a way planned for SDK developers to run photoshop on both platforms for testing etc. (maybe via a limited/timed/no-saving/... version of Photoshop on the platform we are not licensed for?)

    Can we now assume that the touch SDK has been abandonned by Adobe? It's now a year after "should be updated soon", and currently if you try to download the touch SDK from this page you get the Photoshop 3 SDK instead!!!
    I ask as I'm about to remove Touch support from my app; the very few people that use touch are now having problems e.g., timeouts, with the latest version of Photoshop.
    Sandy

  • HT4530 I just purchased an iMac and developed a user name and password.  I'm trying to install a program but can't because I forgot that information and didn't write it down.  How do I reissue a new username and password

    I just purchased an iMac and upon setting it up I initiated an username and a password.  Unfortunately I didn't write it down and now I'm trying to add software and the system won't let me because I forget that info.  How do I reissue a new usernam and password?

    Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” and press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

  • Authorization objet for the support team and message processer

    Hi,
      Is it possible to ristict access to the message processers for the field support team and message processer in crm_dno_monitor. Iwant to restrickt message processer should only change message processer field .
    Regards
    S.Manu

    Hi manu,
    in BADI ORDER_SAVE, Method PREPARE you can check for changes of ticket values and cancel the save process.
    So you could check if the user is in partner function "message processor" and has changed the value in partner function "support team". If so, you could cancel the process, the change will not be saved and the user gets an error message!
    Hope this helps,
    Christoph
    Edited by: Christoph Kronauer on Apr 1, 2010 10:20 AM

  • JDeveloper in team application development

    We are looking for an evaluation of JDEveloper as a team
    application development tool.
    We would be starting from scratch, JAva-wise.
    THe intent is to deploy via JWeb in OAS 4.
    The question: Is JDeveloper 2.0 robust enough for a ground-
    up, team application development project?
    null

    Environment variables are the variables that you set at the OS
    level.
    You can set them in a DOS shell (single session) or in the
    Environment Tab of the System properties (on Windows NT). Double
    click the System icon in the Control Panel. You can add a
    variable and a value for it.
    Then there might be specific OAS variables as well. You can set
    these in the Management Interface of OAS.
    Help on using JWeb can be found in the OAS online help and
    samples.
    Hope this helps,
    -Roel.
    Nick Ayre (guest) wrote:
    : JDeveloper Team (guest) wrote:
    : : karen (guest) wrote:
    : : : We are looking for an evaluation of JDEveloper as a
    team
    : : : application development tool.
    : : : We would be starting from scratch, JAva-wise.
    : : : THe intent is to deploy via JWeb in OAS 4.
    : : : The question: Is JDeveloper 2.0 robust enough for a
    : ground-
    : : : up, team application development project?
    : : We indeed have features in JDeveloper for creating JWeb
    : : applications for OAS.
    : : We are currently focussing more on servlets though. OAS will
    : also
    : : have support for servlets in the very near future. So, since
    : : servlets is the industry standard for generating HTML from
    : Java,
    : : you may consider this for new application development. In the
    : : meantime you can use JDeveloper to create your servlets. In
    : the
    : : production release of version 2.0 (April/May) you will be
    able
    : to
    : : run and debug servlets in the JDeveloper IDE. This will use
    : our
    : : internal servlet runner. In the next couple of months you
    : could
    : : use OAS as a runtime environment for servlets. Please look at
    : the
    : : online demo for servlets:
    http://technet.oracle.com/product/tools/appjava/info/walkthru/ser
    : : vlet/s000.html
    : : (please note that the URL is broken up in two lines. You need
    : : both pieces;)
    : : You can also choose to stick with JWeb for a while.
    JDeveloper
    : : lets you build, run and debug JWeb apps. You might design
    your
    : : apps in a way that only the upper layer is JWeb specific,
    : which
    : : makes migration easier in the future.
    : : Your question about the robustness of JDeveloper. Our
    : development
    : : team is now spending 100% of their time making it more
    robust.
    : : The beta that is available is a little buggy, but we have
    : fixed
    : : loads of bugs un the meantime.
    : : Our own development organization works with the combination
    of
    : : JDeveloper and Clearcase with quite a large team. We are
    happy
    : : with this combination. You can use any other version control
    : : system since JDeveloper projects map perfectly to directories
    : of
    : : files on your operating system. We are also working with
    : : Intersolv on an addin for JDeveloper to their PVCS system.
    Our
    : : longer term direction is to integrate with the Oracle
    : Repository
    : : for team development & version/configuration control.
    : : Thanks,
    : : -Roel.
    : I have installed OAS 4.0.7 .
    : I have installed Jdeveloper 2.0 .
    : I have run some of the Jdeveloper tutorials .
    : Now I am trying to follow the Jweb tutorial.
    : How do I find where to set the ENVIRONMENT VARIABLES ?
    : Also is the any material on Jdeveloper and Jweb ?
    null

  • Team= Personnel Developent= Employee Search

    Dear Experts.
    I have the following question:
    What is the cause for that in the Manager Self Service =>Team=>Personnel Developent=>Employee Search
    the portal not update(display) the information of the employee Direct Reports.?
    I made the following test:
    1) Chief with personnel number 10 assign in the infotype 0105 subtype 001 the user chief_mss and display the employee.
    2) Deallocate(delete) the register  of the infotype 0105 subtype 001 the user chief_mss for the personnel number 10 and assign  this user to the personnel number 20 that  also is chief and have other employees in his responsability.
    However the system follow showing the same employees of the chief 10.
    I check the t.code PPEM - for know that employee have a chief in responsability.
    Anyone have an idea of What is the cause of this issue?
    Regards

    'Employee Search' iView uses a caching functionality to store the
    data that was retrieved from Organizational Management.
    The validity of the cached data can be define via iView property 'Cache
    Lifetime'. The default value is '1' that means that the data is valid
    for one day (to improve the iView performance).
    If you want to have a different behaviour, you could change this caching
    parameter (e.g. set it to -1 to disable the caching at all).
    http://help.sap.com/saphelp_erp2005/helpdata/en/ee/63ef41925b2135e10000000a1550b0/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/2e/5a5d45d9f24fbdb06be2ff53651c3e/frameset.htm

  • I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?

    I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?

    Hi,
    thank you, it’s done! The Chat helped me! Now I cannot go into this forum anymore with my old password, but that’s not a big problem.
    Best wishes,
    Christian
    Von: JimHess <[email protected]<mailto:[email protected]>>
    Antworten an: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Datum: Montag, 20. April 2015 18:38
    An: Christian Kogler <[email protected]<mailto:[email protected]>>
    Betreff:  I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?
    I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?
    created by JimHess<https://forums.adobe.com/people/JimHess> in Photoshop Lightroom - View the full discussion<https://forums.adobe.com/message/7454915#7454915>

  • OTPC Teams and SVN Repo -- cannot use the same SVN repo for different teams

    Can one Subversion repository be used as the versioning repository for two teams?
    I recently installed OTPC Server and client.
    As the administrator, I created a Rally connection, and a Task connection, and a Subversion connection.
    I created a team, and attached the three connections.
    All worked fine.
    Next I created a second team, attaching the three connections.
    In the JDeveloper OTPC client, the Rally and Task connectors work for BOTH teams that I am on.
    The subversion connection will not.
    In the Team Navigator Panel, under the "Versioning" accordion subpanel, for one team it has a SVN connection, for the other team it says "Create Connection."
    When I double-click on it, enter the repository information, and test read access, it says "Access granted."
    When I press Okay to close the dialog it says:
    "A repository connection with the supplied URL already exists."
    Is this an intentional feature that one subversion repository cannot be used on both teams? Or is it a bug? Or is it my error?
    Thanks,
    Arie

    the proxy env is ok in superuser env
    ➜  ~ git:(master) ✗ export | grep proxy
    ftp_proxy=http://proxy.zte.com.cn:80
    http_proxy=http://proxy.zte.com.cn:80
    https_proxy=http://proxy.zte.com.cn:80
    rvm_proxy=''
    ➜  ~ git:(master) ✗ su   
    Password:
    [root@myhost jinleileiking]# export | grep proxy
    declare -x ftp_proxy="http://proxy.zte.com.cn:80"
    declare -x http_proxy="http://proxy.zte.com.cn:80"
    declare -x https_proxy="http://proxy.zte.com.cn:80"

  • Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

    Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
    http://www.youtube.com/watch?v=8mOuoIWzmdE
    Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain  as best I can and apologies from the start.
    It’s a bit of both Hyper-v and Server 2012R2. 
    I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
    examples.
    New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
    Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
    Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
    When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
    HostSwitchTeam for selection.  When installed it shows the Microsoft Network Multiplexor Driver as the only option. 
    Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
    Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
    Any help would be much appreciated.
    Paul
    Paul Edwards

    Hi P.J.E,
    >>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
    Nic 1,2 
    HostVMSwitchTeam
    Nic 3,4,5
             HostMgmtSwitchTeam
    >>The adapter Binding settings are:
    HostMgmtSwitchTeam
    V-Curric
    Nic 3
    Nic 4
    Nic 5
    V-Livemigration
    HostVMSwitch
    Nic 1
    Nic 2
    V-iSCSI
    V-HeartBeat
    Based on my understanding of the description , "HostMgmtSwitchTeam and
    HostVMSwitch " are teamed NIC .
    You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
    HostVMSwitch").
    V-Curric,
    V-Livemigration , V-iSCSI ,
    V-HeartBeat are just VNICs of host  (you can change their name then check if the virtual switch name will be changed )
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I just bought a iTunes card and its not accepting it.  It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work.  How can I expedite this process?

    I just bought a iTunes card and its not accepting it.  It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work.  How can I expedite this process?

    Has it been 24 hours?
    I take it this was a gift card.  iTunes Store:  Invalid, Inactive, or Illegible codes http://support.apple.com/kb/TS1292 - gift cards
    I don't know if this provides an alternative means: https://expresslane.apple.com ; select 'iTunes' in the first column; 'iTunes Store' in the second column
    If you are really desperate you could buy the app yourself, then request reimbursement.

  • I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

    I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections.  I need to be able access files without going to acrobat.com.  Help!!!@

    Post the PDF files to a web site. The browse to them in Safari on the iPad.  When you Open the files specify the Open to occur in Adobe Reader.  Then you can have/Save them in your Documents folder on the iPad.   An iPad has limited access to files otherwise.

  • TS1702 when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

    when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311

Maybe you are looking for