Acknowledgement

Hi,
I am trying to post PO Acknowledgement using ORDERSOR IDOC type and Message type ORDRSP.
When I try to post with different quantity than in Purchase order, its getting error with message ' acknowledgement contains quantity variance, can anybody provide solution for this?
thanks
Raj

Hi Raj,
You got me wrong.
There is no need to call EXIT_SAPLEINM_009 from EXIT_SAPLEINM_007 and in fact you cannot do this.
If you read my previous post all you have to do is -
In Exit EXIT_SAPLEINM_007 , read the quantity from IDOC DATA and pass to abap memory using
EXPORT <FEILDNAME> to MEMORY ID <NNNN>.
In Exit EXIT_SAPLEINM_007 .
IMPORT <FEILDNAME> from MEMORY ID <NNNN>.
and then you have to pass it to YEKPO-MENGE.
I hope you know the concept of ABAP memory . So the two exits will communicate using ABAP memory.
Cheers.

Similar Messages

I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any sugge

I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
iMac, Mac OS X (10.7.2)
Basically i tried to enter too much information into my calendar and it has crashed now i can not get rid of the error message or use the calendar can anyone help please

did you find ou how to get rid of it i can't

Logical system name for acknowledgement in BPM

Hi,
I have a szenario:
IDOC --> BPM --> MAIL
Inside BPM I check the message and depending on an xml-element I stop the process or I send the message by mail.
When I stop the process the BPM sends back an acknowledgement and in SXMB_MONI I can see an error of the acknowledgement:
"Sender Test_BPM_IDOC_TO_MAIL kann nicht in ein ALE Logisches System umgeschlüsselt werden" (Sender can not convert in a ALE logical system)
What can I do?
Possible Solution 1:
I can define my BPM "Test_BPM_IDOC_TO_MAIL" as a logical system (including WE20 for ALEAUD).
Possible Solution 2:
I can enter an existing logical system name in the "adapter specific attributes".
BUT it is not use the same logical system name twice (BAD ... or is there a workaround?
Is Solution 1) a common way?
Thanx
Regards
Wolfgang Hummel

Hi,
there are many ways:
some for aleaud are described in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
>>>>Is Solution 1) a common way?
no this is not good a good idea
BTW
you can also supress aleaud raport IDX_NOALE
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Sender Mail Adapter, technical Acknowledgement

Hi all,
I have a SMTP --> XI --> Proxy Scenario. For the inbound message I get via SMTP, I'd like to send a technical acknowledgement back to the Sender (via SMTP, too). The acknowledgement has a specific message structure, for example it contains the DocumentID of the inbound message I get via SMTP.
My idea now is: Within ReceiverDetermination, I configure two receivers:
1. Backend system for the Inbound Proxy
2. original Sender System
Within Interface Determination, I'll do 2 mappings:
1. Mapping from source message to ABAP proxy interface
2. Mapping from source message to technical acknowledgement structure
Then, receiver agreements / receiver communication channels for both interfaces.
My question now is: is there a more elegant solution then doing the scenario like described above? Maybe something I can do in the Sender Mail Adapter to create the specific technical acknowledgement and sent it back to the sending application?
Best regards
Holger

Hi Holger !
XI supported acks are not available for your scenariom because the smtp/mail sender cannot request it.
http://help.sap.com/saphelp_nw04s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
You should create some kind of artificial ack, that should be part of your own protocol. What I meant with the SYNC proxy, is to use its response message as your own defined ack, because it is not supported as is.
If you call your proxy async, then you will not receive any feedback to use it as ack info.
Another idea could be to forget the ack per se, and just use define an alert in case of problems with the scenario to send a mail to the specified users.
Regards,
Matias

How to get Acknowledgement from legacy system in an Asynchronous scenario?

Hello Experts,
My current scenario is to send an invoice from ECC --> ABAP proxy --> PI --> webservice --> Legacy system & I need acknowledgement back to ECC system from legacy system. How SAP XI acknowledgements work in asynchronous scenarios?
Please guide.
Thanks & Regards,
Nidhi Kukreja

Hi nidhi,
please check following link
http://help.sap.com/saphelp_nw04/helpdata/EN/44/932e8896b610bbe10000000a422035/frameset.htm
Also check this one.
http://help.sap.com/saphelp_nw04/helpdata/EN/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
hope this helps..
- Deepak.

Logical system for IDoc acknowledgment?

Hi,
HTTP --> XI --> IDOC (with acknowledgment) is my scenario
whether the inbound and outbound parameters should be configured in the same logical system or in a different one (in transaction we20)
Thanks,
RPN

For IDOC acknowledgement ,go thru this and do the settings :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This will help u :
Configuration Tips for a Business Service/Integration Process to send back ALE audit IDOC

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig?

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig? IPConfig /flushdns doesn't help at all. Until they fix it I will be previewing and buying my songs thru Amazon.

Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/

I'm trying to connect my mac book pro to my hp office jet 4500 with a usb and my mac and printer don't seem to be acknowledging the other

I cant seem to connect my mac book pro to my hp officejet using a usb cord the two don't seem to be acknowledging eachother and the printer never shows up in the quque

well i plug it into the computer and go to system preferences then to printers and scanners nothing shows up so i press the + in the lower left corner and their is never a printer available to add. i already updated everything like hp says to do bt i can't get it to work

I can't get itunes to acknowledge that I need to redownload a DRM-FREE version of the music I already paid for.

What it says in the subject line. I have a huge number of songs that I'm just now realizing are "Protected AAC audio files," which is a load of complete crock, but whatever. I've tried following the incredibly convoluted and asinine directions about deleting the DRM version first, then going to the itunes store and clicking on purchased songs and re-downloading each one, individually, by hand. This is an unbelievably stupid and time-wasting method, but if it worked, I'd only be moderately peeved.
However, it doesn't work. Itunes refuses to acknowledge that the DRM version is no longer on my computer; as far as they're concerned, it's downloaded, so there's no way to redownload the non-protected version. Never mind that I've now been scammed into signing up for that stupid Match program, which I fully intend to discontinue as soon as I resolve this idiocy - apparently ITunes just flat-out doesn't have the ability to tell which songs they should just automatically replace because DRM is no longer a thing.
If the solution is obvious and I'm missing it, I'd be really happy to hear it - reply to this and mock me for not getting the issue. That's totally cool! But please don't tell me that I'm going to have to literally re-purchase almost 2K songs just because Apple can't do its job.

Have you tried using the Applications DVD that came with your MBP. It will work just fine. It CAME with your computer it is yours to use on that computer.
Give it a try.

Purchase Order Acknowledgement Message

Dear Experts:
Is there a standard message type for acknowledgement for purchase order?
I am sending a PO from SRM via XI to vendor in XML format. I have used the standard message type PurchaseOrderRequest from the XI content. I could not find one for the acknowledgement (NOT purchase order response or confirmation). But I need to give the format to vendor so that they can send the ACK.
I am looking for a standard ack message format.
Can soembody help?
Thanks in advance.

Hi,
Standard acknowledgment is IDOC : ALEAUD.
You can find something more in help:
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
Regards,
Wojciech
Message was edited by: Wojciech Gasiorowski

PI 2.0 Manager Report for Alarm Assignments and Acknowledgements

Is there a Prime Infrastructure 2.0 manager report that shows daily alarms, who the alarms were assigned to and when they were acknowledged? I can't find anything on the tool or in the documentation and this is required to prove compliance in the financial industry.
Thanks

There is no PI 2.0 release yet.
LMS 4.2 can do this. Reference.
I am curious - can you cite the compliance regulation that requires this feature?

Regarding iMessage: text message acknowledgement

Regarding iMessage: is there a way to acknowledge text messages From lock screen without opening up message? In other words can I somehow let the iPhone know the message is no longer new without opening in messages?

I leave wi-fi enabled 100% of the time, and turning 3G access off does not turn cellular data or internet access off completely. EDGE or GPRS access via your carrier's cellular network is still available. Turning Cellular Data off turns internet access off completely via your carrier's cellular network.
The answer to your question is no.

Error when running customize sales acknowledgement report

Hello-
I've tried to customize the Sales Acknowledgement Report. The customize program is working in one instance but when i move it to a different instance, the program would completed with error:
EMR Order Management: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXONT_OEXOEACK module: EMR Sales Order Acknowledgement
Current system time is 31-OCT-2012 13:25:48
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SOB_ID='228'
P_ORG_ID='2486'
P_ITEM_FLEX_CODE='MSTK'
P_PRINT_DESCRIPTION='D'
P_BOOKED_STATUS='Y'
P_ORDER_NUM_LOW='100001776'
P_ORDER_NUM_HIGH='100001776'
P_ORDER_CATEGORY='SALES'
P_LINE_CATEGORY='ALL'
p_open_orders='Y'
P_SHOW_HDR_ATTACH='N'
P_SHOW_BODY_ATTACH='N'
P_SHOW_FTR_ATTACH='N'
-- Start of Reports Command --
ar60runb
P_CONC_REQUEST_ID=11078969
P_SOB_ID='228'
P_ORG_ID='2486'
P_ITEM_FLEX_CODE='MSTK'
P_PRINT_DESCRIPTION='D'
P_BOOKED_STATUS='Y'
P_ORDER_NUM_LOW='100001776'
P_ORDER_NUM_HIGH='100001776'
P_ORDER_CATEGORY='SALES'
P_LINE_CATEGORY='ALL'
p_open_orders='Y'
P_SHOW_HDR_ATTACH='N'
P_SHOW_BODY_ATTACH='N'
P_SHOW_FTR_ATTACH='N'
report=/mariap1ap/mariap1appl/XXONT/11.5.0/reports/US/XXONT_OEXOEACK.rdf
batch=yes
destype=file
desname=/mariap1ap/mariap1comn/admin/out/mariap1_usmtniaderpdb12/o11078969.out
desformat=XML
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is set to:
/mariap1ap/mariap1ora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Enabling XML_REPORTS_ENVIRONMENT based environment switching
The Character-Set of the System is:
UTF8
XML_REPORTS_XENVIRONMENT is :
/mariap1ap/mariap1ora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /mariap1ap/mariap1ora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Previous NLS_LANG Environment Variable was :
American_America.UTF8
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Start of log messages from FND_FILE
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
org_id has changed so delete the cache and reset the globals
PARAMETER VALUE from the DB when org_id has changed : 2488
End of log messages from FND_FILE
Reset original NLS_LANG in environment as :
American_America.UTF8
Program was terminated by signal 11
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 11078969.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 31-OCT-2012 13:26:31
I found similar issues but i think the solution differs per module. Can someone please help me with this?
Thank you in advance

Hello-
I've tried to customize the Sales Acknowledgement Report. The customize program is working in one instance but when i move it to a different instance, the program would completed with error:
EMR Order Management: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXONT_OEXOEACK module: EMR Sales Order Acknowledgement
Current system time is 31-OCT-2012 13:25:48
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SOB_ID='228'
P_ORG_ID='2486'
P_ITEM_FLEX_CODE='MSTK'
P_PRINT_DESCRIPTION='D'
P_BOOKED_STATUS='Y'
P_ORDER_NUM_LOW='100001776'
P_ORDER_NUM_HIGH='100001776'
P_ORDER_CATEGORY='SALES'
P_LINE_CATEGORY='ALL'
p_open_orders='Y'
P_SHOW_HDR_ATTACH='N'
P_SHOW_BODY_ATTACH='N'
P_SHOW_FTR_ATTACH='N'
-- Start of Reports Command --
ar60runb
P_CONC_REQUEST_ID=11078969
P_SOB_ID='228'
P_ORG_ID='2486'
P_ITEM_FLEX_CODE='MSTK'
P_PRINT_DESCRIPTION='D'
P_BOOKED_STATUS='Y'
P_ORDER_NUM_LOW='100001776'
P_ORDER_NUM_HIGH='100001776'
P_ORDER_CATEGORY='SALES'
P_LINE_CATEGORY='ALL'
p_open_orders='Y'
P_SHOW_HDR_ATTACH='N'
P_SHOW_BODY_ATTACH='N'
P_SHOW_FTR_ATTACH='N'
report=/mariap1ap/mariap1appl/XXONT/11.5.0/reports/US/XXONT_OEXOEACK.rdf
batch=yes
destype=file
desname=/mariap1ap/mariap1comn/admin/out/mariap1_usmtniaderpdb12/o11078969.out
desformat=XML
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is set to:
/mariap1ap/mariap1ora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Enabling XML_REPORTS_ENVIRONMENT based environment switching
The Character-Set of the System is:
UTF8
XML_REPORTS_XENVIRONMENT is :
/mariap1ap/mariap1ora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /mariap1ap/mariap1ora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Previous NLS_LANG Environment Variable was :
American_America.UTF8
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Start of log messages from FND_FILE
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
org_id has changed so delete the cache and reset the globals
PARAMETER VALUE from the DB when org_id has changed : 2488
End of log messages from FND_FILE
Reset original NLS_LANG in environment as :
American_America.UTF8
Program was terminated by signal 11
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 11078969.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 31-OCT-2012 13:26:31
I found similar issues but i think the solution differs per module. Can someone please help me with this?
Thank you in advance

How to prevent PO changes in ME22N after Order acknowledgement?

Hi everyone,
        Can anyone tell me how to prevent PO changes (ANY) in ME22N after Order acknowledgement?
        I would like to make it possible without release strategy process or authorizations.
        Do you know some User Exit or Customazing way?
Regards.
Jaime S.

Dear Jaime S,
You can do this by restricting in authorization SHDO and also by marking "changes not possible after release" in Release strategy procedure.
And also you can navigate the menu to, SPRO------>IMG------>Material Management--->Purchasing(OLME)------->Purchase Order---->Define screen Layouts at Document Level---->And go to ME22n And Select the right parameter and in this you can make it display, optional or required entry for the fields.
Regards,
Manjunath B L

Adding New View Objects/Link on "Preview and Print" - Order Acknowledgement

Hi,
Can we add New View Objects/View Links for the existing "Preview and Print" Order Acknowledgement.
I want to add for the 2 new functionalities i.e., for Charges (from OE_PRICE_ADJUSTMENTS_V ) and the Line Level Notes, which is currently not supported by Oracle.
Can anyone help me on acheving this functionality?
Looking forward for your response.
Thanks in advance,
Regards,
Muru

You can do that. You should first create the new business objects(AM, VO, VL) in jdeveloper, create your new regions in jdeveloper, associate the AM to the top level region(stackLayout) you create. Use personalization and add a stack layout in the Preview and Print page, set the extends property to point to the new region which you had created. Donot forget to deploy all the files in middle tier before doing the personalization.
The AM which you had added to the stackLayout will automatically be nested with the root AM of the page during runtime.

Acknowledgement

Similar Messages

Maybe you are looking for