ACL-list syntax error in PIX after upgrade, need urgent help!

Hello everyone
We have a setup including Cisco ACS + a VPN 3005 Concentrator and a PIX 515E (7.2.4)
We upgraded the PIX version from 7.0 to 7.2.4 and suddenly our downloadable access-list was getting refused when users authenticated against the ACS.
When debuging radius in the PIX we found that entering this line in the downloadable access-list give error and stop the users of getting the ACL.
"deny ip any 192.168.0.0 0.0.255.255"
PIX refused to process their auth request when encountering this line.
Fine we said, we changed the ACL syntax to this : deny ip any 192.168.0.0 255.255.0.0
This made the PIX process the ACL.
We were happy for awhile until VPN users started to complain.
It seems that the VPN 3005 cant deal with the syntax we entered in the PIX!
The VPN 3005 doesnt seem to be able to handle the acl line "deny ip any 192.168.0.0 255.255.0.0" !
It can only handle "deny ip any 192.168.0.0 0.0.255.255" !
Which the PIX cant handle..
I'm a loss at what to do here..
We got VPN users who cant surf now with these ACL problems.
What can I do? Anyone else encountered this?
We upgraded the VPN 3005 to the lastest SW version
Really need some help here guys!
Thanks

I don't think Cisco ever changed anything on the PIX. It uses subnet masks from day one AFAIK and VPN Conc uses wildcard masks like IOS. You can use the acl-netmask-convert command on the ASA to fix this issue. This way you define a willdcard ACL on the ACS/AAA server and then use this command on the ASA to use the same downloadable ACL for both devices (PIX,VPNC).
http://www.cisco.com/en/US/docs/security/asa/asa81/command/ref/a2.html#wp1622944
Please Rate if helpful.
Regards
Farrukh

Similar Messages

Syntax error in SAPLCRM_CONDITION_COM_OW after upgrade 7 - 7 with EhP1

Dears,
after upgrade I cannot go into edit mode for activities, sales orders. I get a short dump.
I think it may be connected to FM CRM_ORDER_GET_ACTIVE_OW which returns nothing , so variable for
lv_no_pricing is not set to X. Then when system tries to check pricing it throws error in LCRM_CONDITION_COM_OWF02, that 'CS_ACS_I_COM' does not have a component 'BASIC_TIER.
Can you help?
the same I get when opening document in sap gui and web ui.
It maybe some additional configuration loaded in upgrade.
Best Regards
Radek

Hi,
These structures are usually generated. Please go to transaction
/SAPCND/CTFC, for Application CRM regenerate all fields again.
Go regenerate the field catalog to the following IMG menu;
Customer Relationship Management
-> Basic Functions
   -> Pricing
     -> Define Settings for Pricing
       -> Maintain Field Catalog
Goto menu Field Catalog -> Generate.
Regards,
Aidan

IPod Nano 6th Generation can't be restored, error code 1439...need urgent help

I haven't recharge my iPod for about 5 days. Then I plugged it into my laptop yesterday. For the 1st time it just showed the Apple logo and slept. After a while it has showed a white screen saying, "Do not disconnect" and also a forbidden sign(ø) have been blinking. Itunes says, "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with itunes." with an 'Ok' button. I've tried for several times but it can't be restored. Finally, itunes shows an eror message saying, "The iPod 'iPod' could not be restored. An unknown eror occured (1439).".

I assume you have tried everything here?
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
It could be an indication of damaged or corrupted flash storage, in which case a low level reformat of the IPod and its file system might come in handy.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

FRM-41830 :List of values contain Lov After upgrade Form patch set to 19

We are facing the below issue when click on menu,
FRM-41830 :List of values contain Lov After upgrade Form patch set to 19
Please let us know if someone has got similar type of issues.
Regards,

Hi,
Please verify that you have completed all the steps in the Developer 6i upgrade doc. Also, please post the complete error message.
Have you tried to regenerate the forms via adadmin and see if it helps?
If none of the above helps, please obtain the FRD file as per (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i) and post the contents of the log file here.
Thanks,
Hussein

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

After upgrading to maverick; help & other functions not working

After upgrading to maverick; help and other functions not working?

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need Urgent Help: Solaris fails to come up after applying patch 120012-14

Hello All,
I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
WARNING: mod_load: cannot load module 'neti'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
strplumb: can't install module drv/ip, err -1
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
WARNING: mod_load: cannot load module 'consconfig_dacf'
/kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
WARNING: mod_load: cannot load module 'consconfig'
WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
%l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
%l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
%l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
%l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
%l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
%l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
Thanks,
Farhan
Edited by: rozzx on Jul 5, 2008 1:48 AM

Solve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.

BW error. Need urgent Help( I will give out full points).

We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.

Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time.

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

Error in Jboss after upgrading to AutoVue server 20.2.2 from 20.1.0

We've developed an integration to view the files using AutoVue server. At the first stage the integration we used AutoVue server 20.10 and the functionality works fine. After upgrading to AutoVue server 20.2.2 following error comes when accessing the URL http://<servername>:58080/ifs-autovue-connector/servlet/DMS. Please note that Jboss is the application server.
15:31:37,561 INFO [STDOUT] ERROR [http-0.0.0.0-58080-1] (?:?) - Failed to verify or update null
java.lang.NullPointerException
        at java.util.Hashtable.put(Hashtable.java:514)
        at com.cimmetry.vuelink.context.GenericContext.setInitParameter(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.registerDMSContext(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.init(Unknown Source)
        at com.ifs.autovueconnector.DMS.init(DMS.java:22)
        at javax.servlet.GenericServlet.init(GenericServlet.java:212)
        at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1048)
        at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:777)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:129)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:183)
        at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
        at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:566)
        at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.internalProcess(ActiveRequestResponseCacheValve.java:74)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.invoke(ActiveRequestResponseCacheValve.java:47)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
        at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:905)
        at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:613)
        at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:2036)
        at java.lang.Thread.run(Thread.java:745)
15:31:37,572 INFO [STDOUT] WARN [http-0.0.0.0-58080-1] (?:?) - Failed to load DMSAction class: com.ifs.autovueconnector.ActionGetProperties
java.lang.ClassNotFoundException: com.ifs.autovueconnector.ActionGetProperties from BaseClassLoader@763d9f12{vfszip:/C:/ifs_tqa/jboss-eap-5.1/jboss-as/server/App8TQA/deploy/docvue.ear/ifs-autovue-connector.war/}
        at org.jboss.classloader.spi.base.BaseClassLoader.loadClass(BaseClassLoader.java:477)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:358)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:191)
        at com.cimmetry.vuelink.Vuelink.loadDMSAction(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.registerDMSActions(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.init(Unknown Source)
        at com.ifs.autovueconnector.DMS.init(DMS.java:22)
        at javax.servlet.GenericServlet.init(GenericServlet.java:212)
        at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1048)
        at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:777)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:129)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:183)
        at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
        at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:566)
        at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.internalProcess(ActiveRequestResponseCacheValve.java:74)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.invoke(ActiveRequestResponseCacheValve.java:47)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
        at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:905)
        at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:613)
        at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:2036)
        at java.lang.Thread.run(Thread.java:745)
15:31:37,743 INFO [STDOUT] Initializing proxy connection pool
The errors is ClassNotFoundException. But we've not implemented the class ActionGetProperties. Instead propactions are used. Please help us to resolve this issue as our customers will be in trouble after the AutoVue upgrade.
/Amaranatha

I would assume you are using the new jars that come with the latest ISDK
and that you have read the documentation with the list of all the changes
so in order to known which configuration parameter is missing, you might need to trace it using a debugger
there is one parameter that is missing ie returning null and it is obviously a mandatory one
Also, you most defintively did not properly migrate you web app from 20.1 repo to the 20.2.3 repo as you have missing classes
com.ifs.autovueconnector.ActionGetProperties
so your class path is not properly up to date
that also is a deployment descriptor error
Please review you deployment descriptor and validate that your war is properly built

ORA-01722: invalid number (Error in Application after upgrade to 3.0)

Dear All,
After upgrading to 3.0 I am no longer able to login to my application. The error I am seeing is:
ORA-01722: invalid number
Error Could not process show_hide_memory.show_hide_collection_output procedure !
Please help me pin-point the issue and fixed it.
This happens in some applications but in others it doesn't...
Regards,
Pawel.

I believe I have found the source of the problem!
This is coming from the sample application which was used for the show/hide of regions example.
The code behind the above procedure is:
CREATE OR REPLACE
PACKAGE show_hide_memory AS
PROCEDURE show_hide_collection;
PROCEDURE show_hide_collection_output;
END;
CREATE OR REPLACE PACKAGE BODY show_hide_memory AS
PROCEDURE show_hide_collection AS
l_arr apex_application_global.vc_arr2;
l_found boolean := FALSE;
l_collection_name VARCHAR2(255) := 'SHOW_HIDE_COLLECTION';
BEGIN
IF(wwv_flow_collection.collection_exists(p_collection_name => l_collection_name) = FALSE) THEN
htmldb_collection.create_or_truncate_collection(p_collection_name => l_collection_name);
END IF;
l_arr := apex_util.string_to_table(p_string => v('TEMPORARY_ITEM'), p_separator => ']');
-- If the array member count of l_arr < 3, then the following code will raise an exception
FOR c1 IN
(SELECT seq_id
FROM apex_collections
WHERE collection_name = l_collection_name
AND c001 = l_arr(1)
AND c002 = l_arr(2)
AND c003 = l_arr(3))
LOOP
-- It exists, so delete it
apex_collection.delete_member(p_collection_name => l_collection_name, p_seq => c1.seq_id);
l_found := TRUE;
END LOOP;
IF l_found = FALSE THEN
apex_collection.add_member(p_collection_name => l_collection_name, p_c001 => l_arr(1), p_c002 => l_arr(2), p_c003 => l_arr(3));
END IF;
COMMIT;
END show_hide_collection;
PROCEDURE show_hide_collection_output AS
BEGIN
htp.prn('<script type="text/javascript">' || CHR(10));
htp.prn('' || CHR(10));
htp.prn('</script>' || CHR(10));
END show_hide_collection_output;
END;
I guess now I have to find the bug in the above code !

Error launching application after upgrading to 10.1.3 production

Our web structure looks like this:
+ web
    + bin             project jar files and client jar libraries
    + images
    + WEB-INF
       + conf        application property files
       + lib           project jar files and server jar libraries
       + logs
    + xml
+ META-INFWith previous versions of OC4J this web.xml would suffice:
<?xml version="1.0"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
         version="2.4">
<display-name>ch_web</display-name>
<description>web.xml file for Casthouse</description>
<servlet>
    <servlet-name>afc.system.server.StartupServlet</servlet-name>
    <servlet-class>afc.system.server.StartupServlet</servlet-class>
    <init-param>
      <param-name>CONFIGURATION_HOME</param-name>
      <param-value>C:\oracle\JDeveloper10g\j2ee\home\applications\ch_web\ch_web\WEB-INF\conf\</param-value>
    </init-param>
    <init-param>
      <param-name>SERVLET_HOME</param-name>
      <param-value>/ch_web/servlet/</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>casthouse.analysis.server.spectro.AnalysisReceiverService</servlet-name>
    <servlet-class>casthouse.analysis.server.spectro.AnalysisReceiverService</servlet-class>
    <load-on-startup>2</load-on-startup>
</servlet>
<session-config>
    <session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
    <extension>html</extension>
    <mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
    <extension>txt</extension>
    <mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
    <welcome-file>index.html</welcome-file>
</welcome-file-list>
<login-config>
    <auth-method>BASIC</auth-method>
</login-config>
</web-app> But after upgrading, the server side initializes allright, but the client cannot connect. I get a 404- page cannot be found when trying.
After adding the following to my web.xml...
   <servlet>
     <servlet-name>LoginServlet</servlet-name>
     <servlet-class>afc.login.server.LoginServlet</servlet-class>
   </servlet>
   <servlet-mapping>
     <servlet-name>LoginServlet</servlet-name>
     <url-pattern>/servlet/*</url-pattern>
   </servlet-mapping>The client did locate some code, but not all. From the java console, I discovered several exceptions due to servlets referred and not found. I tried to map some of the central servlets in our application, but stopped. I thought, this cannot be right. We have very many servlets in our application. It shouldn't be nescessary to map them all in our web.xml... Is it?
What am I missing?

Ok.. hmm, life was easier before...
I tried to add the http.webdir.enable="true" to the only orion-web.xml I could find (under j2ee\home\application-deployments\{web-root}\{context-root}\orion-web.xml
Don't know if this should be in another location, we do not deploy this. This is generated during deployment from our JDeveloper deployment profile). But after the container was restarted, the file was reverted to the old version without this attribute set. Frustrating...
45 servlets are now registered in our web.xml. That is 3 servlets which should be accessible to the user from the address bar in the browser, and 42 servlets accessible from either the client or the server programmatically.
But is it then nescessary to add both <servlet> tag and <servlet-mapping> tag for one servlet, or is the <servlet-mapping> tag only nescessary for those servlets, which should be available to the end user, and not directlly called from the application itself?
I still get an exception when trying to instanciate the application. Our application uses one or two properties files which it needs to read upon instanciation. They live in {context-root}\WEB-INF\conf\
OC4J doesn't seem to give access to this folder anymore. What do I have to include in our web.xml in order to give the appropriate read access to this folder? Should only be readable server side from a Servlet. Contents are communicated to the client through this servlet.

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

XL Reporter - Santax error in selection after upgrading from PL26 to PL29

Hello all there,
again a question concerning my old friend XLR!
We are running SAPB0 2005A SP01 PL29.
After an update of XLR PL26 (Version 6.80.01.26 / 6.80.367) to XLR PL29
(Version 6.80.01.26 / 6.80.388) in some reports the following syntax
error came up: "Definition parsing failed; syntax error near #NULL".
This is the selection in which the syntax error is reported:
BPA(CardType = "C" And scrIncl_0 = "N" Or
CardType = "C" And scrIncl_0 = #NULL )
ARDT( Code = "ARCreditMemo","Invoice" )
In XLR PL26 the report runs without any problems! The following as
additional information on the meaning of this selection:
We select all clients (CardType = "C") where the UDF scrIncl_0 is
either assigned the value "N" or a value is not yet assigned (#NULL).
Again I stress: It works as expectedin XLR PL26 !!
I had checked all SAP notes concerning XLR PL29 or #NULL before I
posted this question but had found nothing pointing into this direction!
Best Regards
Frank Romeni

Hi Daan,
you were right - it had to do with the XLR naming of my UDF.
Is there any reason for XLR to change UDF names from e.g. name to name_0 or to "name_0" (with apostrophes) ?
In my last reply I wrote "the UDF are all available with there old names. I can make this sure, since other selections in the same report definition use the UDF - without the #NULL construct - are not rejected."
But the other selections were not rejected with syntax errors, since XLR put apostrophes round the wrong names. In the mentioned selection the UDF name was not put in apostrophes and therefore the selection was rejected with a syntax error. Unfortunately I realised the wrong names in the not rejected selection only after I checked the results (all empty) when I executed the report.

Lost syntax highlight in Vim after upgrade

I don't know why, but Vim is not enabling syntax highlight anymore after the upgrade from 7.1.12-1 to 7.1.63-1. I've already searched in Vim's website and with ':help syntax.txt' but no luck. Any guesses?
EDITED:
I figured out part of the problem. I've always used the syntax 'vi filename' to open my files because I knew Vi had a link to Vim. But now it's not linking anymore. Opening files with 'vim filename' gives me the syntax highlight. So I guess the last upgrade had removed the link. Any chances to have it back?
Last edited by alexmatos (2007-08-12 14:07:06)

I had the same problem too, but the difference is, I always use vim, but after upgrading Arch I lost syntax highlight. After googling a lot and lurking @ vim sites I finally found the indirect answer here!
I tried the opposite and use vi to open files but bash said vi not found, I did pacman -S vi, and pac said vi is up to date, upgrade? I decided not to believe vi and upgraded, everything's back now.
So thank you for helping without knowing.

ACL-list syntax error in PIX after upgrade, need urgent help!

Similar Messages

Maybe you are looking for