ACL's load time and changes
I have a couple bugs here that never really were as big of an issue as they
are now. The first I did post and comment on all the way back at the beta.
1. When applying a new rule to the bm server it takes a long time for
aclcheck to reload. Finding this is actually being caused from surfcontrol.
For some reason surfcontrol is being reloaded everytime the rules are
either applied or when they refreshing every 24 hours.
2. When a new rule or changing a ruleis being added and click apply the new
rule does not go into effect. If click apply again than the change goes
into effect. This can be especially troublesome with the aclcheck reloading
surfcontrol and slowing things down since proxy does not allow internet
while cpfilter is not fully up.
Thanks
Craig Johnson wrote:
> In article <K0Cyi.4271$[email protected]>, Rick
> Bousquet wrote:
>> 2. When a new rule or changing a ruleis being added and click apply the
>> new rule does not go into effect. If click apply again than the change
>> goes into effect. This can be especially troublesome with the aclcheck
>> reloading surfcontrol and slowing things down since proxy does not allow
>> internet while cpfilter is not fully up.
>>
> I've been seeing posts about this one.
>
> Novell is working on patching ACLCHECK issues, at least in regards to
> 3rd-party products. Have you opened an incident on this? (Partly to see
> if you can get a patch to test, and partly to be sure Novell is made aware
> of the issues you are seeing...)
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
Thanks Craig
Working with Gonzo on it now.
Rick Bousquet
Similar Messages
-
iPhone calendar appointments set to local calendar, and need
to switch to exchange calendar. Have to edit each appointment one at a time and
change to exchange calendar. Is there any method to edit all appoints in my
calendar at once and change the calendar setting?Not sure this will work but if you go into the Keyboard preferences, then click the Keyboad Shortcuts tab, and then the '+', you can add your own shortcuts for any application. I am not sure what happens if you try to override an existing shortcut since I haven't tried using this.
Edit/Update:
Probably against my better judgement I'll also throw this out there - there's an Unsanity haxie called Menumaster which might also allow you to do what you want. Against my better judgement because personally I stay clear of haxies. It's (all haxies) probably almost certain to break in Lion. They always do with each major release. -
Long loading times and jerky playback
Hello,
I work often with Adobe Premiere CS6 but got an annoying problem.
When I have a project with many clips in the sequence, than I got really long loading times and often the playback is jerky
Is there a function, which reduces the loading times and/or the jerky playback?
I already used "Remove Unused" and "Delete Render Files".
Is it helpful to split the clips to serveral sequences and put all clips together at the end?
My computer specifications:
CPU: AMD Phenom II X6 1055T (2,8 GHz Hexa-Core)
RAM: 8 GB Corsair XMS3 DDR3 1333 MHz (2 GB reserved for other applications)
HDD with Adobe Premiere CS6: Crucial RealSSD C300 CTFDDAC064MAG
HDD with videoclips: first Samsung Spinpoint F3 1TB (HD103SJ)
HDD with projects: second Samsung Spinpoint F3 1TB (HD103SJ)
Graphic: NVIDIA GeForce GTX 460
OS: Microsoft Windows 7 Home Premium (64-Bit)
Is there a bottleneck at my hardware?
Thanks a lot!
TimIs there a bottleneck at my hardware?
Yes. The CPU, memory and motherboard. See the Warning here: http://ppbm7.com/index.php/tweakers-page/85-raid-or-not-to-raid
Also read the other articles http://ppbm7.com/index.php/tweakers-page -
Hello friends,
I am having the same problem as some people had here: when trying to install my apple tv it gets stuck on the first screen (loading time and date). Apparently it is something related to my router. The question is, how to set up my router so I can use it with my apple tv?
Supposing that is possible, of course.
Mine is a Cisco DPC3925 but I thought there might be a way of doing it with all the routers...
I could not find one single tutorial or someone who would explain how to do it.
Anyone has any ideas or links that could help me?
I would appreciate any help.
Thank you guys!Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
i'm pretty green and like some help.
I want to load a movie clip and change the dimensions of the
clip at the same time- because my main movie is 765X750 and the new
clip is smaller. I want the smaller movie to play at it's native x
and y size in the projector. I can't work out the script to do it.
This is what I have but doesn't change the dimensions when it
loads.
on (release) {
setProperty("_self", _height, "400");
setProperty("_self", _width, "600");
loadMovieNum("intro.swf", 0);
Thank you.The problem is when you load a SWF, the movieclip you're
loading into inherits the properties of the SWF being loaded into
it. As loadMovie happens after everything else has processed,
resizing the movieclip has no effect as it simply gets reverted to
the dimensions of the SWF loading in. What you need to do is run
the sizing code after the loadMovie has started and the movie has
begun to load.
I usually use a loader function that calls another function
when it's finished loading. The function can contain _x = ?? &
_y = ??. I also hide the loading movie or alpha it to zero and then
show it or fade it in when it's finished loading. -
Hi,
I am revamping a program that was originally done in Captivate 3. All of the sound files were recorded using another program and imported. They were originally in WAV format. The file size is huge on this thing and the load time is (to me) excessive. I eliminated a couple of the videos and coverted about 50% of the WAV files to MP3 and reloaded them. I also made sure I cleared the unused items from the library. Unfortunately the CP file size has remained the same and the load time is still long. Can any of you give me some thoughts on how to cut this thing down?
Many thanks in advance for your help!
GaryHello,
How did you check the CP-filesize? Can you please save the file, close Captivate, and then reopen it with the file? Have a look at the filesize then? The decrease of file size is not immediately visible, but do know that clearing up the library, and certainly deleting video/audio does decrease the filesize really. WAV-files will be converted to MP3 anyway when publishing to SWF, unused items in the library do not have any influence on the SWF-size either. Perhaps you are not talking about the CP-filesize but about the SWF-size (because you are referring to load times). To decrease the filesize for the SWF you'll have to look to other means: decrease the resolution (if acceptable, by downscaling), decrease the JPEG-quality, decrease the audio quality. To make the loading time smaller you can also change the percentage to load before starting to play the SWF (default=100%, see Preferences, Project, Start and End).
Lilybiri -
I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report: 2
Anonymous UUID: 2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController 320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch 3908
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/ -
Long load times and poor application performance
We have packaged and deployed Adobe CC using SCCM within my school division. It pushed out fine, but now when we attempt to open Photoshop (or any other CC app) it has unusually long load times. 2-4 minutes. It seems to be hanging at the "Reading preferences" stage. After the application appears to have started, it takes an unusually long time to actually start working in the application (it appears to just hang).
Hello There,
EXE's always bundle additional files because it is a stand-alone entity. And, if the size 9GB then it will surely take time to load all the files. I'll check with the team again on how we can optimize it. BTW, are the videos inserted as slide video or Event video?
Thanks,
Vish -
Using AS2 to get time and change based on result
I need to make an edit to a flash projector that was built some time ago that changes what is playing based on the time of day. It is used to advertise breakfast or lunch/dinner for a restaurant. Previously we had set it up so that the time change happened at 5 in the morning and 10 in the morning. The code is below. The restaurant wants to change the time switch to be on the half hour now. I know how to pull the hours and minutes to do this.
This is the code I have been using
var currentHours:Date = new Date();
var currentMin:Date = new Date();
timeInHours = currentHours.getHours();
timeInMin = currentMin.getMinutes();
var now:Date = new Date();
shownow = now.setMilliseconds;
if (timeInHours > 4 && timeInHours < 11 ){
breakfast_mc._visible = true;
breakfast_mc.play();
dinner_mc._visible = false;
dinner_mc.stop();
//trace(timeInHours);
} else {
breakfast_mc._visible = false;
breakfast_mc.stop();
dinner_mc._visible = true;
dinner_mc.play();
//trace(timeInHours);
trace(timeInHours);
trace(timeInMin);
stop();
The breakfast and dinner movie clips have this code in them as well, so than at the end of each cycle, it checks the time and will switch.
I found this code on Flash Kit and wanted to try and modify it, My hope was to get it to generate a 24hr time 1604 or 1029 that I could then do a < / > comparison with, but this function adds the numbers together so 4:15 PM = 31 and 12:19 = 31 also. Does anyone have any suggestions about how I can do this? I need the time to change at 5 AM and 10:30 AM. There is a possibility that they may want to extend it out to include day of the week as well. RIght now I just need fractional hours to work though.
function checkTime()
var dat = new Date();
var hr = dat.getHours(); // this is 24-hour format already...
var mn = dat.getMinutes();
// round to most recent 15 minute boundary
//mn = Math.floor(mn/15) * 15;
// OPTIONAL - add leading zeros to hr and minute
if (hr < 10)
hr = "0" + hr;
if (mn < 10)
mn = "0" + mn; // remove these last 4 lines if leading zeros not wanted
return hr + mn;
// example usage:
time = checkTime();
trace( time );
Any and all suggestions are welcome. Thanks in advance!Hi Kglad,
Thanks for your response, I am trying the code now and I am having some difficulty with it. This is probably so simple, but I can't see it.
var d:Date=new Date();
if ((d.getHours()>=5 && d.getHours()<10) || (d.getHours()==10 && d.getMinutes<=30)){
breakfast_mc._visible = true;
breakfast_mc.play();
dinner_mc._visible = false;
dinner_mc.stop();
trace("it is breakfast time");
} else {
breakfast_mc._visible = false;
breakfast_mc.stop();
dinner_mc._visible = true;
dinner_mc.play();
trace("it is lunch time");
stop();
Once it is past 10:30 I want the dinner movie clip to play and the breakfast clip to stop and disappear. After 5 in the morning, I want the dinner clip to stop and the breakfast one to start.
I've tried < and > with minutes and neither seems to work. The hours work, I set up a test clip with this script in it and when I change my computer clock, I can make this switch back and forth with hours but the minutes still do not factor in.
Thanks -
How can I "profile" folio articles load time and memory use?
Hi folks,
I am beating my head against the wall since last week:
How can I figure out a problematic article (one or more), that causes both Content Viewer and custom viewer (.IPA) to crash on load?
The crash report states that "application took too long to start", in some cases it is "jettisoned".
The whole layout has 150+ arcicles, each about 30 pages long in average, with the total size of 705 Mb. We have about 30...40 3D images there, lots of navto links, embedded video/ audio clips - I think we used every MSO type available for iOS viewer.
All articles are of PDF type.
No custom JavaScript code, no HTML tweaking - just a transition from relatively complex inDesign layout.
At some point, while filling the folio with content, the Content Viewer started crashing on load.
We rolled back and startred re-assembling the whole package, checking once 30...60 more articles were added.
Our DTP guy was backing up intermediate results while adding articles, so I have several .IPA of the same layout, one with less than 30 articles, and several subsequent versions (60, 90 articles, etc). The smallest one works great even on 1st iPad - a bit slow (about 5 seconds to render a page when jumping between articles), but no crashes, no jerky pages, zooming and flipping is perfect.
All bigger versions (30+ articles) crash on both iPad1 and iPad3.
Adobe states there is no limitation in the number of articles and pages per article, but it seems to be a limit which we don't know. Or there is something in our design that causes crashes.
WHAT TO DO???
The idea to start from stratch again, making a backup before adding each article, uploading and testing is not good. It will take weeks, we don't have that much time.
Can there be a "profiling tool" for DPS, similar to what programmers use when the code is unacceptably slow?
Some switches to run the installed custom viewer app from command line, with verbose logging, debugging, whatever???
Is there any way to know, what exactly on our side causes the problems?
Need help ASAP.
Regards
SergeMike, I basically have to do the same. The idea to use DPS for something else than glossy magazine or corporate catalog, is my brainchild, and losing hopes feels like euthanazing a pet, to say the least.
With the only exception: I don't see DPS as an inferior product. Rather, it is a raw product, brought to the light before it is really ready, in order (as it is often, if not always, happens in hi-tech industry) to corner the territory before competitors catch up.
As you could see in other threads, there are no books or training courses available yet, and I believe Adobe team is not quite sure what can and cannot be done with DPS. A part of the minefield is Apple iOS, that enforces certain limitations to ensure system stability. And I am sure, there is a lot of other factors in play that we are not aware of, and probably never will be.
The point of saying what's been said is: there is a price to be paid for being on the bleeding edge of technology. This price, other than spending money for expensive equpment, other than investing time into learning and experimenting, is taking the risk of failure. The risk that it will not work out due to reasons beyond your control. So I don't think Adobe is much to blame here, they are playing the same game. Accept the rules or leave...
Just my 5 cents... -
I have to wait for about 5 minutes between Loading time and Welcome screen
it takes me quite a long time to wait i don't why. it worked normally before i installed a new type of Internet Explorer(7.0), after that i restarted my computer i have to wait about 5 minutes to see the Welcome screen. Can any one help me, thank you
Hi,
Check the installation and the system permission of your machine and check if the version is Beta 2 or Beta 3. What's for a Service Pack is on your Machine.
By the installation from IE7 is a eventually possible a Installation from MS Defender. Check it.
Make it a reinstallation from IE7 and make a new Installation.
IE 7
http://www.microsoft.com/windows/ie/downloads/default.mspx#ie7Downloads -
Login filevault 2 (two times and change picture)
I encrypted the disk of my MacBook with Filevault 2.
That worked. But i will have to login twice now.
The first login is the password to get to the original login screen. (admin and guest)
1. Is it possible to make one login ?
2. How can i change the picture of the login screen which was created by FileVault 2 ? It's not in the system preferences.... There is my admin picture which turns up on the second login screen.
Thanks !By emailing the photo to yourself from within iPhoto, you can get a choice of four different sizes (small, medium, large and original). Whichever one is closest to the size you're looking for, you can use that option and, when you receive the email message, save the attached image. But that's certainly not an elegant solution, never mind an exact one. In short, neither that method nor the Export command allows you to specify both a resolution and a file size in KB or MB. There are many other photo editing applications that offer better control over those attributes than iPhoto does. I recommend that you simply export copies of your pictures from iPhoto at original size, then open them in a different program and fine-tune the resolution and JPEG compression settings to achieve whatever combination of resolution and file size you need.
Message was edited by: eww -
Hi experts,
I have two ?s today.
1. The ODS that i used to laod sometimes takes 50 min for x no of records (1st request) and sometimes takes 15 mins..(2nd request) for the same no of records after i delete the 1st request. what could be teh reason..??
2. Is there any way to automate the transfer of xchange rate from one s/m to another..say from r3 TO BW..if possible what are the reasons taht might stop this automatci job..
thanks
davehi Dave,
1. perhaps you system resource workload different when that 2 requests loaded,
for ods performance try check oss note
565725-Optimizing the performance of ODS objects in BW 3.0B
567747-Composite note BW 3.x performance: Extraction & loading
670208-Package size with delta extraction of ODS data
search also other oss note 'ods performance'
2. yes, rsa1->source system->r/3 source system, right click 'transfer exchange rate', in next screen, menu program->run in background. you can check the job with SM37, job name is RSIMPCURR. check the reason why that job stopped, see the job log, perhaps connection/user authorization problem?.
hope this helps. -
New 4s, slow load time and screen discoloration until it "warms" up?
Just bought new 4s for my girlfriend, the phone seems to lag when starting up and the screen colors are not right. Just a bunch of lines until it warms up. Even after warming up if you lock the phone the display immeadiately reverts to the lines.
Reset, hold both Home and Power buttons until the iPhone begins to restart itself. Usually less than 15 seconds of holding both buttons. See if this fixes it.
If not, Restore the Firmware. See if this fixes it.
If not, take iPhone back to where you purchased it or to Apple for Warranty Coverage. -
All Gurus:
I am trying to create a route for a specific shipping point (one plant) where the loading time is different for every route. I am looking at configuration for defining shipping point:
IMG > Enterprise Structure > Definition > Logistics Execution > Define, copy, delete, check shipping point. Under "Determine Times", there is "Determine load. times" and 4 options:
No loading time determination
A Route dependent
B Route independent (Route ' ')
C Default from shipping point
If select "C" and specify 11 days for "Loading Time with Days", the system will always have 11 days defaulting on the sales order schedule lines between the "Loading Date" and the "Goods Issue Date".
What I need is to have more flexibility as to the number of days on the Loading time. If I select A or B, can you please let me know what that would do and where I can configure it so that the system gives me more flexibility as to the number of Loading Days?
Thanks in advance,
TaTal -
When the loading date and GI date is same you can change the GI date by adding number of days in the field "TransLdTm". This time will get calulated as loading time. In each route definition this may vary according to requirement. this will give you different transit time determination for single ship point.
In configuration do setting as below e.g.
TransitTime 10
Trav.dur.
TransLdTm. 1
TrLeadTimeHrs
With this system will calculate in reverse way from delivery date to customer based on route transit time.
Material availability date + loading time (1) + transit time (10) ... this will be the calculation.
Hope this answers your question. Let me know anything else you require on this.
Regards
Amol
Maybe you are looking for
-
Error -1073807339 when using IVI (setup in MAX) to initialize instrument
I'm using LabVIEW 2014 and the most recent version of the Measurement & Automation Expert (MAX) to communicate with an Agilent 33500B series function generator with IVI drivers on a Windows 8.1 computer. (I also see this problem when trying to commun
-
On awakening iMac after sleep, I get a pop up saying "The disc was not ejected properly....." etc. Presumably this was a disc of photos or a slideshow I had put onto a disc at some time past. This has been going on for months. I have inserted and ej
-
Windows Live Messenger for Nokia 'There Was a Prob...
'There Was a Problem Processing your Request' This is all i get when i try to change my display picture ..... My mobile is N95 8G ....... please I need help .. !! Best regards, Message Edited by alroo7 on 10-Mar-2009 09:05 AM
-
Help saving .swf files in Flash 8
Okay here is the deal. I downloaded a template for oscommerce that has a flash header (this flash file is main.swf). I am able to make the adjustments that are needed in Flash 8 but once I try to save it as .swf it tells me that I am unable to save i
-
Embedding a JFileChooser in a Panel
is it possible to embed a file chooser in a JPanel?, i'm trying to get my program to look something like how CuteHTML does. Or should i just use a JTree to display the dirrectory, and contents?