ACL with schedule

Dear,
I have a customer who want deny a service with schedule, he can´t do it on firewall, for this reason he want block a traffic from the main office to a small office across MPLS link.
The Idea is deny this traffic on catalyst 4507 that is connected on MPLS link for a specific time.
I saw in Cisco's web site about Kron, but to be honest I didn´t understand.
Anyone know anything that I can make on 4507 to solve this problem?
Thanks

If I remember right, the Cat 4500 also supports time-based ACL. If thats the case something like the following should work:
time-range workhours
periodic weekdays 8:00 to 18:00
ip access-list extended TEST
deny tcp any any eq www time-range workhours
permit ip any any
interface gigabitethernet3/0/1
ip access-group TEST out

Similar Messages

  • Error while import PAR with schedule task

    Hi everybody
    I've the following error while import a new PAR with schedule task in Portal NW04s
    Inner Stack is:
    Unable to lock the local configuration to run import "import_it.tsf.pld.cercapersone.updateadgruppofs.st.prjconfig_config_fwk_service_4692550,4692550_(ready)".
    System error is "LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"".
    Inner Stack is:
    LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"
    at com.sapportals.config.fwk.data.ConfigLockManager.lockWithDependent(ConfigLockManager.java:507)
    thanks in advance

    Hi Ram,
    I've encountered the problem only on productive instance with offline deployment (Scheduler Tasks reinitialize CRT). Before a restart I have to make sure it works.
    thanks for your help!
    Gennaro

  • MRP Run with Scheduling Agreement

    Hi All,
                Can anyone explain the the Scheduling Agreements, we are running the MRP with schedule lines generated.I want to know the complete cycle with the T-codes in sequence they are executed.My requirement is business people need a demo of the Scheduling Agreement,type LP,LPA how they work and difference between LP and LPA.They run the MRP everyday.
    Thanks,
    Kris
    Edited by: Csaba Szommer on Sep 19, 2011 12:52 PM

    Hi,
    The basic difference between LP and LPA  is the way that the schedules are communicated to the vendor.
    for more clarity please refer the blow links.
    LP and LPA in scheduling agreement?????
    Difference between LP and LPA scheduling agreements
    http://it.toolbox.com/wiki/index.php/Scheduling_Agreement
    Thanks.

  • Err with scheduling an abap program using open dataset

    issue: have an abap program which uses "open dataset ... for input ..." to read the file. 
    - with manual ly running it, receive the following message "dataset_not_open".  
    - with scheduling it, receive same message
    attempting to run an abap program as part of a process chain (ie scheduling a background job) in BI.
    the abap performs the following fxns:
    1) read a file on the server
    2) removes delimiter, renames it
    3) rewrites the file onto the server
    initially used ws_upload for reading and ws_download for writing the file. 
    - both fxns worked fine if it is run manually --> but failed as a  background (part of process chain)
    - note 7925 states can't use ws_upload, download for background jobs
    -so switched to "open dataset"
    Any suggestions as to why the "open dataset" does not work is greatly appreciated it.
    B.A.

    Thank you for all responses. here is more info about the err message:
    sy-subrc = 8
    'invalid argument'
    I looked up the invalid argument in note 99155 --> due to "The destination file is no longer available during repeated file access. "   So, the following steps were taken:
    - file was regenerated and
    - file was placed on the server to be read
    have the following code:
    OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE encoding default
                          MESSAGE D_MSG_TEXT.
    also have tried the following:
       OPEN DATASET d1 for input in text mode encoding default.
       open dataset d1 for output in text mode encoding NON-UNICODE..
       open dataset d1 for output in text mode  encoding utf-8.
    none had worked.  system --> status shows no unicode.
    THanks again for any suggestions.

  • Stock tranport order with scheduling agreement

    Hi All
    i am trying to do Stock transport order with Scheduling agreement within company between two plants like 1) 2008 2) 2009
    2008 :--- supplying plant
    2009:---- recieving plant
    maintain same material in both plants & created Scheduling agreement with document as LPU. i would like to get 1000 qty material every month so trying to run MRP for same material so where i can release my STO from receiving plant (2009) & send STO order to plant 2008.  while running MD03 getting error as :
    for  material ( 1008 ) not maintained automatic MRP
    please tell me what do next step to solve error
    thanks n advance

    Did you maintain the MRP data in the material master for this mateiral and special procurement key needs to be maintained for this mateiral in MRP 2 view (from plant)

  • Problem with scheduling planned orders in MRP

    There is a problem with scheduling planned orders in MRP. SFG is assigned to the BOM of FG. No inhouse production time maintained in the material master of SFG & FG. routing maintained for both . In OPU5 scheduling & capacity reuiremnts tickmarked for detailed scheduling. Scheduling level - via detaied scheduling. Scheduling type - backward. Adjust basic dates , adjust dep. req. to order start set. In MD02 , scheduling is via ' lead time scheduling'.
    My problem is the start date & time & finish date & time is same for planned orders of FG & SFG in the detailed scheduling tab of the planned orders. (Duration is same because of same capacity requirements on the same work centre. But how is the finish date same for both SFG & FG?)
    (Capacity requirements are being generated.)
    What could be the problem ?

    Dear,
    By scheduling the routing and maintain lot size dependent time in material is best practice and result of scheduling will be consistent.
    If you want SFG before FG you need to define lead time offset in BOM or need to maintain the floats before production.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • What is setps to crete the Sub contracting with Scheduling agreement .

    Hi All,
    what is setps to crete the Sub contracting with Scheduling agreement and up to migo
    Thanks
    HAPPY

    hi
    firstly set the SPRO> MM>Purchasing>set up Subcontractor order>assigning plants to the delivery documet LB
    check following in system
    1. Shipping point created properly
    2. Shipping point has been assigned to the appropriate plant.
    3. Maintain shipping conditions in customer master
    4. Maintain loading group in material master
    5. Assignment of customer to vendor master
    then try following process
    1. Create a subcontracting Purchase Order (ME21N)
    u2022Click on u201CMaterial Datau201D tab under u201CItem detailsu201D and then click on u201CComponentsu201D to view the components / make changes.
    u2022Account Assignment and Item Category are usually blank in a subcontracting PO.
    2. Delivery of components to subcontracting vendor (ME2O)
    u2022Enter selection parameters like vendor and plant and click on Execute.
    u2022Select the desired line, click on Create Delivery and a delivery will be created.
    3. Post Goods Issue (VL02N)
    u2022The movement type is usually 541.
    4. Post Goods Receipt (MIGO)
    5. Logistics Invoice Verification (MIRO)
    *check out the doc i given in previous reply it is for SUBCONTRACT with SA *
    regards
    kunal

  • Third party order processing with Scheduling agreements

    Gurus,
    I have a situation here, i am working with a automobile industry and customer sends us EDI 830's (FSD and JIT schedules). we are using scheduling agreements (Doc type - LZ) to process those schedules. I have couple of parts that we dont manufacture and we ask our vendors to ship it direct to customer. i am trying to set up a third party order processing for this sceanario but system is giving me message that i cant use scheduling agreements. i tested with sales order and it worked fine with that. Is there any way to figure out solution with scheduling agreements. Any help will be appriciated.
    Aman

    Hi Aman,
    Scheduling agreements with delivery schedules are not supporte in third-party order processing.
    Baskar

  • Data Tracking with Scheduled Webis

    Using XI R3
    Is this a true statement:  "Data tracking will not work with scheduled webi documents or webi documents in scheduled publications because the scheduling process does not 'save' a document that it can then use as a reference for the next  iteration"?
    If I  refresh the documents manually daily with tracking on and save them, then schedule the publication after that with the  'refresh on open' property turned off in the publication, that seems to be the only way to accomplish it.
    My publication, by the way, produces pdf versions of the webis distributed vai email.
    This requirement to manually run the webi documents every day really defeats the whole advantage of scheduling.

    Hi Stephen.
    Lets understand why data tracking requires a "save report".
    When data tracking is enabled. current version of report output is compared with immediate previous version of report output. Also data tracking requires report to run and saved as HTML format. It does not work in PDF format.
    In case of scheduled report, it will not work as report instance is not saved.  However if you enable "Automatic Data Tracking" it seems to be possible.
    I would suggest reading "Data tracking modes" Part from webi user guide. You shall get all your ans.
    --Kuldeep

  • STO with scheduling agreement, between different plants, different co.codes

    Hi All,
    For STO with scheduling agreement, between different plants under different company codes, please let me know the configuration and order flow process
    Regards,
    kumar

    Hi,
    When you create a stock transport scheduling agreement, you can schedule the exact delivery dates for a stock transfer. Proceed as follows:
    From the Purchasing menu, choose Outline agreement -> Scheduling agreement -> Create trnspt sch.agm. ME37
    Fill out the initial screen. In the field Supplying plant enter the plant issuing the material. The agreement type LU is defined in the standard system. The item category must be U.
    When you press ENTER, the details screen for the header data is displayed.
    Enter the validity period and check the other entries on this screen, if necessary.
    Enter the individual items in the item overview screen. Enter a receiving plant for each item in the Plant field.
    Save the scheduling agreement.
    Enter delivery schedules for the scheduling agreement with the function Outline agreement ->Scheduling agreement -> Follow-on functions -> Delivery schedule.
    For configurations
    Go into SPRO
    Menu path is
    IMG -> MM -> Purchasing -> Scheduling agreement -> Set up stock transfer scheduling agreement
    A) Define shipping data for plants
    B) Create and define checking rule
    C) Assign delivery type and checking rule
    D) Assign Document type
    Hope it helps.

  • Trouble running jobs with scheduler

    Hello,
    We have trouble running jobs with scheduler since we upgrade DS4 from 14.0.1.142 to 14.0.2.322. It works fine for several hours and then randomly jobs are not started. There is no error in the log.  In AL_RWJobLauncherLog.txt file,  there are no "RWJL_EXIT called" in that case :
    02_28_2012 09:30:00     CRWJobLauncherApp::InitInstance called.
    +02_28_2012 09:30:03     +
    02_28_2012 09:30:33     *** RWJL_EXIT called.
    02_28_2012 10:00:00     CRWJobLauncherApp::InitInstance called.
    02_28_2012 10:30:00     CRWJobLauncherApp::InitInstance called.
    02_28_2012 11:00:00     CRWJobLauncherApp::InitInstance called.
    02_28_2012 11:30:00     CRWJobLauncherApp::InitInstance called.
    +02_28_2012 11:30:03     +
    02_28_2012 11:30:33     *** RWJL_EXIT called.
    Sever_eventlog file shows that job is not started. Whole server has to be restarted to get it to work again (restarting DI_JOBSERVICE is not enough). Could you help please ?
    Regards
    Annie

    Hi Annie,
    Mmmhhh that doesn't make much sense to me, except if you have problems with the repository:
    1) Your JobServer or JobLauncher has problems executing jobs
    => reads the repository to get job information
    2) Your Management Console (independant from the JobServer - but on same machine) has problems
    => Is connected to the repository to show job status, adapters etc.
    3) The Tomcat which is hosting the Management Console is OK
    => No connection to the repository of DS.
    Do you have any network or database problems? Can you put the database on the same server?
    I could be wrong of course...just the only thing that comes to mind..
    Regards
    Norbert
    P.S:
    What about compressing your repository and/or
    1395641 - Will truncating the AL_HISTORY and AL_STATISTICS Table compromise the referential integrity of the repository?
    There are half a dozen KBAs about these tables..
    Edited by: Norbert Klein on Mar 3, 2012 10:37 AM

  • Problem Fixed! Print Apps with Scheduled Delivery continuing to print

    Some Scheduled Delivery Print Apps may have continued to print once selected as a Print Now function on an Officejet 6500, 7500, and 8500, Photosmart D110 and B210.  This has been solved as of June 23, 2011. 
    See the Managing Scheduled Delivery Apps page for setting up a new Print App with Scheduled Delivery.  Anytime you wish to unsubscribe follow these steps.
    Although I am an HP employee my posts and replies are my own.

    Hi N2KZJ,
    Try the solutions located at this website: How to Manage, Pause, or Unsubscribe from Prints and Faxes
    Please post here if you this solved your problem (and select Solved) or if you need further help.
    JamieAtHp
    I work on behalf of HP.

  • Site Blocking with Schedule

    I would like to know of ways to block websites, and with schedules. As in, from 1PM to 3PM, they are unblocked but otherwise always block.
    Thank you for your attention.

    Hi Winfred Edern,
    Please try to use the Threat Management Gateway (TMG)  in
    Windows Forefront, you can set up a "Block Websites" rule and schedule this rule.
    For more detailed information of the setting, please refer to these articles:
    How to Block Websites in Threat Management Gateway (TMG) 2010
    Microsoft Forefront TMG - Best Practices Firewall policy rules
    I hope this helps.

  • Call Forwarding with Schedule

    I'm wondering if it's possible to set up call forwarding with schedule? For example, calls received at the Skype Number will be forwarded to phone number A from 12am to 12pm, phone number B from 12pm to 4pm, and a Skype contact from 4pm to 12am.
    Thanks!

    Hi, Jimliu, and welcome to the Community,
    Fabulous idea!  Unfortunately, the Skype Number feature does not provide such facility as you describe.
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Deploying the Scenario with scheduling

    I am trying to depoy the scenario with scheduling using command:
    OdiImportObject -FILE_NAME=<FileName> -WORK_REP_NAME=<workRepositoryName>
    -IMPORT_MODE=SYNONYM_INSERT
    Giving the proper work repository of the environment which i am deploying into.But the scenario gets deployed without the Scheduling component? Can anyone help on this?

    Murphy's Law: If anything can go wrong it will
    A corollary to Murphy's law: When everything fails, read the manual.
    Web application funda: Every web application must have its own context root. So, if wkfsocos is one
    web application then, wkfsocos1 is another web application -
    and hence must have its own context root.
    Hello Aman,
    If you are in E-Commerce version 4.0, then read this
    [ISA_Buildtool document |https://service.sap.com/~sapdownload/011000358700001920472003E/ISA_BuildTool_10.pdf]
    to create a copy of the application in its own context root.
    From your URL pattern I guess you are in E-Commerce version 4.0.
    If you are in E-Commerce 5.0 or above, then the
    [Extension Guide |http://service.sap.com/~sapdownload/011000358700006120622006E/]gives steps to create a copy with its own context root for use in modification.
    (See the chapter on - Creating a project specific Web Application with own context root )
    Both these links require access to SAP Service Marketplace. You can also find the
    documents through /instguides shortcut in Service Marketplace.
    Easwar Ram
    http://www.parxlns.com

Maybe you are looking for