ACLDL, Vistex Vendor Keys - Invalid from 46C to ECC 6 (EHP4) upgrade

HI
We are upgrading our system from 4.6C to ECC6 (EHP4) directly using
CUUC approach.
In the IS_SELECT phase we have got three add-ons
ACLDL
IRMGLB
IRMIPM
The note 632429 is mentioned to be referred to get the vendor keys.
But there is no vendor key for the above three addons mentioned.
I have referred the note 1069063 - Vistex IP Module Upgrade Guidelines.
It has given three keys
Target version
" ECC60                  3406956 1295006
ECC60 w/ EhP            See below, depends on SAP_BASIS release
For ECC60 w/ EHP only, if your system is on SAP_BASIS release 700 when starting the update with SAPehpi, then use these keys:
        IRMGLB = 1408873 IRMIPM = 1131158
For ECC60 w/ EHP only, if your system is already on SAP_BASIS release 701 when starting the update with SAPehpi, then use these keys:
        IRMGLB = 1103857 IRMIPM = 1162672
I tried all the above three keys, but all are invalid.
Can anyone help us to provide the valid vendor keys for
ACLDL (source version - 400)
IRMGLB (source version - 30B)
IRMIPM (source version - 30B)
Thanks & Regards
Senthil

Hi , we are doing upgrade from R/3 4.6 c to ERP6.0 with EHP4 -SP08.
during sandbox , I have removed ACCL component and continue the upgrade. I have created OSS messgae and they said check with your ACC vendor team.
As of now I don't received any issues either development team during UT/IT. ( Integration Testing is going on)
We are planing to do mock upgrades and let me know if you have any data loss or any issues during testing without ACCDL component.
Finally , I check with customer and they said we are not using any more ....
Please advice if any thing is missing ! Appreciate your help.
Regards,
Hari

Similar Messages

Upgrade from 46C to ECC 6

Hello:
We are planning to begin technical upgrade in SAP, from 46C to ECC 6.0.
I have the next landscape:
-Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
-New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
We want to install SAP ECC 6.0 in NS and get the data from CS.
Which is the best and easy way to do this? SAP manuals are quite generic. I have two ideas but I would like your comments:
1st way
1. Homogeneous copy of CS
2. I install ECC 6.0 in NS with the option to import data generated in 1. (is this possible??)
3. Finish installation and aditional configurations. I begin to test.
2nd way
1. Homogeneous copy of CS
2. I install 4.6C in NS with the option to import data generated in step 1. (Not sure if 4.6C will accept Solaris 10 and Oracle 10.2).
3. I suppose I don't need to reconfigure after installation and import.
4. I do necessary tests. At this point I would have 46C on the new versions of Solaris and Oracle.
5. I begin the SAP upgrade to ECC 6.0 in NS
6. .... The remaining processes indicated by SAP
Thanks for your attention.

> -Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
> -New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
The database software is usually installed during the run of sapinst/R3setup, not before. You may run into problems if you pre-install Oracle (environment, necessary database options not set etc.)
The easiest way would be do to a system copy.
I would then
- install the latest Oracle instantclient
- install the latest kernel 46D_EX2 kernel
Markus

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

Error in upgrade from 46c to ecc 6.0

hi experts,
we are facing an error at the time of upgrade from 46c to ecc 6.0 in the phase JOB_RSUPGAIMEXE.
did anyone face this error anytime during upgrade on windows plotform?
Please let us know your comments..
regards
raghu

Hello,
Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
Thanks
N.P.C

Upgrade from 46c to ECC 6.0 new components support package

dear experts,
we have upgraded our test system from 46C to ECC 6.0
before upgrade in 46C we have support packages components
SAP_BASIS 46C
SAP_ABAP 46C
SAP_APPL 46C
SAP_HR
PI 2003_1_46C
SAP_NOTES 46C
ST-A/PI 01B_R3_46C
ST-PI 2005_1_46C
after upgrade to ECC 6.0 we found
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_BW 700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
EA-IPPE 400 0003
EA-HR 600 0003
EA-GLTRADE 600 0003
EA-PS 600 0003
EA-RETAIL 600 0003
EA-FINSERV 600 0003
EA-DFPS 600 0003
EA-APPL 600 0003
FINBASIS 600 0003
ECC-DIMP 600 0003
ERECRUIT 600 0003
FI-CA 600 0003
FI-CAX 600 0003
INSURANCE 600 0003
IS-CWM 600 0003
IS-H 600 0003
IS-M 600 0003
IS-OIL 600 0003
IS-PS-CA 600 0003
IS-UT 600 0003
LSOFE 600 0003
SEM-BW 600 0003
we are planning to apply SPS 06. Is it mandatory we have to apply
all the support packages in SPS 06.
we are confused as we dont use IS-OIL,EA-,ERECUIT,INSURANCE,FI-
please suggest which support packages we have apply relating to the
functionality we have in 46C
regards
Raghu

Hi,
you have to apply the same type of packages as before.
All other are included in ECC, but if you don't use the special services and applications (for example IS Oil or stuff like this), there is no need to apply all these packages.
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
should be enough
Regards
Timm

Upgrading from 46C to ECC 7.0

Guys,
My company is going to upgrade R/3 46C to ECC 7.0 later this year. From the development (ABAP programs, any ABAP objects) standpoint, any suggestions on preparation, or what can be done in our current 46C environment to ensure a smooth transition from 46C to ECC (unicode, obsolete ABAP syntax, etc)? Also any idea and recommendation on planning the upgrade, as well as things to watch out for are welcome.
Thanks,
Yan.

First ECC 7.0 does not exist, so you will be upgrading to ECC 6.0. And yes, you can start by doing a start for any calls to WS_UPLOAD and WS_DOWNLOAD. You will need to change these calls to call the GUI_UPLOAD or GUI_DOWLOAD function modules.
Other syntax issues will need to be handled after the upgrade, like using the ECODING extension on all OPEN DATASET statements.
Regards,
Rich Heilman

Short dump in MIGO and VL02N when upgrading from 46C to ECC 6.0

Hello,
We are doing an upgrade from R/3 46C to ECC 6.0 and we face a shortdump in trx MIGO (upon saving the document).
DBIF_RSQL_INVALID_REQUEST
a BKPF_INSERT in program SAPLF005
The same shortdump happens when doing a Goods Issue on the SD side.
Looking at the program, this is not modyfied so I guess it is a standard SAP error.
OSS however, up to know did not respond to my message and there does not seem to be a SAP Note on this issue!
Anyone had this problem before. How did they solve it.
Thanks for any reply,
Aart

Posted in another forum

Error in Zreport while upgrading from 46C to ECC 6

Hello Experts,
I am facing problems in 1 Zreport while i have upgraded that report from 4.6C to ECC 6. Dump is reported while running the program.
Error is : "Access non-existent storage area."
error is coming @ line : ADD <f1> THEN <f2> UNTIL <f3> GIVING v_totval.
FIELD-SYMBOLS: <f1> TYPE ANY,
               <f2> TYPE ANY,
               <f3> TYPE ANY.
DATA: v_totval LIKE lfc1-um01h.
IF <f1> IS ASSIGNED AND
     <f2> IS ASSIGNED AND
     <f3> IS ASSIGNED.
    ADD <f1> THEN <f2> UNTIL <f3> GIVING v_totval.
ENDIF.
can you ppl please tell me any solution as its urgent !
thanks in advance.

this is fine for me.
DATA: BEGIN OF numbers,
          one   TYPE p VALUE 10,
          two   TYPE p VALUE 20,
          three TYPE p VALUE 30,
          four TYPE p VALUE 40,
          five TYPE p VALUE 50,
        END OF numbers,
        sum     TYPE i.
SELECT-OPTIONS position FOR sum.
ADD numbers-one THEN numbers-two
                  UNTIL numbers-five
                  ACCORDING TO position
                  GIVING sum.
A

Recommandations for upgrading from 46C to ECC 6.0

Hello
Our SAP system landscape is actually in 46c and is only composed of 3 servers with almost 40 users declared (25 actives) on production system. Modules FI/CO HR MM are actually implemented.
We plan to upgrade the system to ECC 6.0 between March and August of 2009. The evaluation of the upgrade should begin as soon as possible. Do you think it can be possible to realise the upgrade alone, without the help and expertise of a SAP consultant? Do you think the delay for preparing the upgrade is suffisant?
Thank you.

As suggested earlier, refer to Master and technological guides for reference.
also for information, the upgrade can fall under any below scenarios.
1. Strategic Business Improvement
Focus on functionality extension and improvement
Enablement of new and optimized business processes and scenarios based on new ERP core functionality
2. Functional/Retrofit Upgrade
New functionality to be implemented as part of the upgrade, modification clearing
Focus on reduction of system complexity
3. Technical Upgrade
Focus on pure technology upgrade
Retain functionality used
Review Usage of custom developments
As per the requirement. knowledge and experience the decision can be made.

ECP Upgradtion from 46c to ECC 6.0

Hi,
Our client is upgrading PS from 4.6c to ECC 6.0 (Technical upgrade). In PS we are extensively using nested ECP and in this we are using HTML code in a costmodel template and the formula in derivation rule.
Is this formula and the HTML code will be moved to ECC6.0 from 4.6c while upgradation? or having any other option?
Thanks for your help in advance.
Krishna.
Edited by: krishna.gujju on May 12, 2010 8:34 PM

Hi,
you have to apply the same type of packages as before.
All other are included in ECC, but if you don't use the special services and applications (for example IS Oil or stuff like this), there is no need to apply all these packages.
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
should be enough
Regards
Timm

Upgrade from 46c to ECC

Hi,
Can you please explain me the complete procedure to be followed and precautions to be taken for upgrading SPAU(program,func groups,data elements,tables,structures, etc) objects, SPDD objects and custom objects(programs,func grps etc..) from 4.6c to ECC version.
Thanks,
Laks.

Hi ,
The Precautions are .
1 .SPDD transaction should be executed 14 days before the upgrade .
2 .SPAU transcation should be executed after the Upgrade.
3 .Maximum error in SPAU can be resolved using Basis and Function Consultant support .
4 Maximum errors are in BDC,Sapscript ,Userexits which deal with standrad transaction .
5 .Also take care about The Unicode errors.
6 .For Unicode Use Transaction UCCHECK and SCOV.
Please reward if useful .

Batch Jobs Running during upgrade from 46C to ECC 6!

Hi All
We are currently due to run our upgrade in the next two weeks and I have one final concern. The only testing we have not done relates to batch jobs.
Our upgrade stratergy is downtime minimised.
Does anyone know any best practices or issues that could effect our upgrade?
Cheers
Phil

Hi Phil,
If I remember correctly all background jobs in SAP R/3 are de-scheduled by the upgrade process. You have to manually reschedule them after the upgrade so make sure you have good scheduling documentation (or consider the central job scheduling provided by SAP NetWeaver for the future).
One tip is that you need to make sure that jobs started from other systems are postponed until after the upgrade too (e.g. data extractions to BI). The upgrade process cannot determine job schedules and dependencies in other systems/scheduling tools.
Cheers,
Mike.

Upgrade from 46C to ECC 6.0

Hi All,
We are upgrading from 4.6C to ECC 6.0.I have downloaded all the SOFTWARE from Service market place except ORACLE 10.2 which I am not able to locate it.
Do I need to order ORALCE UPGRADE CDS from SAP? or is there any way to find out on the service market place...
Would appreciate If any of you can throw some light in this regard...
Thanks in Advance,
Johnny.

Of course the DVDs are available for download.
I do not know your OS, but you can follow this path:
http://service.sap.com/installations
Entry by Application Group ( you should also have it available in "My Company's Application Components" )
From here there are several ways. For example:
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 2004S
Installation and Upgrade
Your OS
ORACLE
You get a list including oracle 10g

WebDynpro ABAP application issue from Portal after ECC 6 upgrade to SP14

Hi,
We have recently upgraded the Kernel, ABAP and Java stack of ECC 6.0 system to SP14. After the upgrade most of the WebDynpro ABAP applications doesn't load and just flickers when run from Portal as a WebDynpro iView, but they run perfectly fine when accessed directly using URL. These were running fine prior to the upgrade. Can someone suggest what can be going wrong.
Will reward points for helpful answer.
Regards
Mukesh

Hi Mukesh,
As Gajendra said, restarting the service in SICF sometimes works for us, but not always. We have also had to deactivate the entire Webdynpro node, and then reactivate it and all of the services below it.
Obviously something changed in the SP, given that we now have to do this every time we create a new WDA application.
Cheers,
John

Upgrade R/3 4.7 to EHP 5: HR-CEE 100_470 Vendor key required

In Source release R/3 4.7 2.00 we've HR-CEE 100_470 Add-on (this add-on not used now!)
During UPGRADE procedure at phase IS_SELECT we're select:
"KEEP the Add on with current version. Vendor key required from note"
We're next notes considered:1259650,524948,1589409,1318299,936978,864783,but can't vendor key found.
We're send message to SAP with BC-UPG-ADDON component -> it's right in this situation?
Or we can download HR-CEE 470 Addon Upgrade CD for menu: "With Upgrade Add on..." ?
But w''re can't found this HR-CEE 470 Addon Upgrade CD on marketplace....

Hi,
In my opinion, as you are upgrading to ERP EhP5, you would not be able to keep HR-CEE 100_470. You would need to upgrade to a higher version. Check the below wiki link for the procedure to request HR-CEE download.
http://wiki.sdn.sap.com/wiki/display/ERPHCM/GettingStartedinHCMPoland
Regards,
Srikishan

ACLDL, Vistex Vendor Keys - Invalid from 46C to ECC 6 (EHP4) upgrade

Similar Messages

Maybe you are looking for