Acomdata external drive MAC using SecureHD LogIn.

Has anyone figured out how to update Acomdata external drive to use on MAC using SecureHD LogIn?
The only way now is to launch the PC side of MAC, sign in then suspend the PC side, then the drive appears on the MAC desktop and can be used. This is a pain!

Hi pealo86
If your going to be using the External HD strictly for backing up the iMac, ie Time Machine or Cloning with SuperDuper or CarbonCloner, then you will want to reset the Partition Map Scheme to *GUID Partition Table* and the Format to *Mac OS Extended* (Journaled).
adding these DU instructions > http://www.kenstone.net/fcphomepage/partitioningtiger.html
If however you wish to use the External Drive for sharing files between OS X and Windows then you will either need the Mac software that JGG has suggested or need to reset the Drive Format to MS-DOS FAT-32, which unfortunately has a file size limit of 4GB.
See Sharing Drives > http://www.macworld.com/article/51972/2006/07/ww_drives.html
Dennis

Similar Messages

I have CS6 on my iMac. I want to load it onto an external drive to use off my Mac Air. I have the serial number. How do I do this without having to subscribe to CC?

I have CS6 on my iMac. I want to load it onto an external drive to use off my Mac Air. I have the serial number. How do I do this without having to subscribe to CC?

Note the min-requirements for PS CS6 on a Mac.
Mac OS
Multicore Intel® processor with 64-bit support
Mac OS X v10.6.8 or v10.7
1GB of RAM
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
1024×768 (1280×800 recommended) resolution display with 16-bit color and 256MB (512MB for Extended) of VRAM
OpenGL 2.0-capable system
DVD-ROM drive
Nancy O.

Is Time Machine something that I can back up to in a separate particle of my new MacBook Pro or do I need an external drive to use with it?

.....ie we have Seagate external drives but both have Windows files on them, although plenty of room. Am I able to keep the Windows files on them and back up to them with Time Machine on new MacBook Pro? Don't understand....and not very clear. Thanks
Belinda

Belinda,
In order to use Time Machine the external volume must be formatted in Disk Utility as "Mac OS Extended (Journaled)". You can't use a drive that is formatted to be used for both a Mac and a Windows unit (exFAT, etc.). You should purchase a new external drive to use with Time Machine and never let your work go for over a week with hooking up to the TM drive and allow Time Machine to do it's thing.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Is it possible to have your music and videos saved on different external drives and use the same iTunes library?

Is it possible to have your music and videos saved on different external drives and use the same iTunes library?
I am running out of space on my external hard drive and would like to split the movies and music between two external drives while using the same iTunes library is this possible.
My library is stored on the external drive all of my music etc is stored.

Yes.

Is their another way like to use my time capsule as an external drive not using time machine?thanks

is their another way like to use my time capsule as an external drive not using time machine?thanks

You do not have to use Time Machine.. but the TC is hardly suitable for a NAS.. it has no means to back itself up and is relatively slow. Still that is up to you..
CCC or Superduper are good backup softwares .. and there are a number of others.

TS1338 I have 4 Trojan Horse viruses on my external drive I use for Time Machine. My MacBook Pro hard drive is clean. I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. Wayne

I have 4 Trojan Horse viruses on my external drive I use for Time Machine. My MacBook Pro hard drive is clean. I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. I am using 10.8.3 Wayne

ksu62 wrote:
The infection names are: classload.jar-719ef6a5.zip
                                          classload.jar-5db452le31.zip
                                          ar3.jar-6ce3b2f-45l483f.zip
                                          classload.jar-lef99412-63bsd3fl.zip
Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

How to format external drive for use against windows and mac

Hi.
Please bear with me, a possible MAC newbie here
I'm about to buy the 13" Mac Book Pro (after ditching the Lenovo X301 because of a super slow processor, slow FSB, slow intel graphics).
But I have a couple of questions before I buy this Mac Book Pro.
NOTE:
My main OS (stationary pc) is Windows, and will probably be so for a long time.
But I need a lightweight laptop while on the run, and could not actually find any other one than the Mac Book Pro that met my requirements.
I'm using Adobe Lightroom for indexing and managing images on my windows stationary computer and will also use Lightroom on my Mac Book Pro.
I'm to use an external HDD for this purpose and will need to be able to both write and read to/from that HDD from both MAC and Windows.
Export lightroom library to External HDD from Windows (thumbnails + keywords).
Import new images and edit keywords etc from mac book pro in lightroom.
Import changes into my windows library version after been edited from library in mac book pro.
What options do I have when it comes to formatting that HDD?
What will the PROS and CONS be for the different options?
Note (I'm not to switch to Aperture (my main computer is still Windows))
Regards

Hi.. and thanks for that answer... another related here:
I'm to buy this external drive:
http://www.lacie.com/no/products/product.htm?pid=11038
This page:
http://pc.wikia.com/wiki/FAT32
tells me that windows XP will only format FAT32 to max 32GB,
will my upcoming MAC book PRO be able to format that whole disk using FAT32?
Or do I have to use something else to format it with?
Regards

Question about Formatting Buffalo USB 1TB external drive for use with Mac Book Pro Mountain Lion HD

Hi there, Have Mountain Lion HD operating system (not sure if it is 10.8 or 10.8.1. or 10.8.2) and have a Buffalo USB 3.0 1TB hard drive. When go to utilities to try and format with Mac OS extended, following 3 files show. DriveNavi. exe, Slm.exe and Mac. The option to left click and erase menu is not there. Or at least not as shown in all the help videos.
It is USB connection so will take ages but want to use drive to store video footage and also partition to back up Time Machine. ( travelling in South America and no other Ext Drive option available too buy) how much space should i assign to Time Machine when partitioning? Is there anything else i need to think about? as new to formatting. Any thing else i can do to make process of transfering footage to Buffalo quicker?
Final question is if it is finally reformatted am i going to have to spend so long accessing footage from hard drive when back home and editing that it really is not worth if, and i should just write this off as an inappropriate purchase, and try and buy more memory cards and not bother with transfering/storing? Thanks in advance for time spent trying to assist.

Use Apple's Disk Utility in the Applications/Utilities folder to format the drive.
The programs on the drive given to you by the manufacturer is likely backup software (or malware) and essentially worthless, it will be wiped when you format the drive.
I do NOT advise you partition that drive for TimeMachine, rather I advise you not to use TimeMachine at all for your purposes because TM is just a backup, not a bootable drive.
Rather do this.
Get another hard drive that is equal to or slightly larger than your boot drive.
Format the drive in Disk Utiltiy > 1 Partition, option: GUID, Format: OS X Extended journaled, click Erase and move the slider one spot to the right and click Erase. This will take some time as it's going to map off any failing sectors it can BEFORE you lay data on the drive corrupting it.
Next, pay for and download Carbon Copy Cloner, use the default settings and simply clone internal drive to the external drive. this will also take some time the first time.
Next use Disk Utility to Repair Permisisons on both drive. Now reboot the machine and hold the option key down, you can select the external drive clone to boot from!!
You can update the clone the same way by using CCC, but it doesn't take as long, only copying changes.
This is better than TimeMachine as a bootable clone is bootable in case your internal drive fails to boot the machine.
Use the first drive for storage and be very gentle with it while it running, like you should do for all hard drives as they are subjective to shock damage.
The objective with the clone drive is you keep it safe, and not carting it around where it can be more subjective to damage like the other drive will be.
Remmeber you need 2 forms of hardware backup at all times.
Most commonly used backup methods

Music on external drive. Use I Tunes to organize. Stream to TV and home stereo through Mac Book and Apple TV. Updated to Mavericks operating system. Now Many times art does not match song or music stops playing altogether. Any ideas ?

I have music on external G drive. Use I Tunes to organize and play music. Stream it to my TV and home stereo using MacBook and Apple TV. Just updated operating system to Mavericks. Now have two issues when playing music. 1) Many times album art displayed on TV will not match song playing, and 2) Music will just stop altogether sometimes. Any ideas ?

Agreed! This bug with the ringtone delay (№4.1) is really annoying

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

External Drive, MAC & PC

hey everyone!
so i purchased an external drive (Western Digital Passport 320gb to be exact) for use of backup and data storage. My problem is this. I was a dumb idiot and didn't do enough research before formatting the drive. i than proceeded to wipe out the (wd320) drive and partition it into 2 partitions using disk utility in OSX. ( i made one partition for general use and one as a backup clone (bootable). this is where the problem lies. when i plug my (wd320) into a mac it's fine; however, windows pc's cannot read this drive. I read some online posts and it is to my new understanding that it needs to be a fat32 partition? is this correct? If so, is there a way for me to add an extra partition to my already partitioned (wd320) without deleting everything?
hope i laid out enough information to be helped..
THANKS IN ADVANCE!

Hi Jeremy,
It takes a bit of work in Terminal but you can have one partition FAT32 and one HFS+. Another option is to format the entire drive FAT32 but you couldn't backup System files to it, only data.
John

ITunes Media Folder Renameable on External Drive (mac)

I have a 1TB collection of music in a folder on an external drive within a folder that is NOT called iTunes Media, but which until now had behaved as if it were.
I just switched to a clone of my old 1TB drive on a 1.5TB drive. After 11 hours of locating my 157000 tracks, I was able to find and use every track. However, when I added a new track, apparently I lost the ability to add new music tracks within the Music folder. Instead, a new iTunes Media folder was created within the folder which SHOULD have been called iTunes Media.
In the (new) iTunes Media folder there are a few folders containing the music I added after the switch. In the Music folder (below, but higher hierarchy) there is 1TB of music, which means it cannot be copied into the (new) iTunes Media file on the 1.5TB drive (not enough space).
Even though it would entail 100+ hours of new clone-backup time, the most logical solution would be to discard the embedded iTunes Media folder, rename the top-level folder iTunes Media, then let iTunes relocate the tracks again (over another 11 hours) and reload the few tracks loaded since the switch.
However I do not know if iTunes will allow this to work, and if so, what needs to be done in order to make it work.
Can the top-level folder be renamed? Do I need to untick and tick the Keep iTunes Media Folder Organized button?
Thanks
Mac OSX 10.6.8, iTunes 11.4

I am getting a bit lost on what was done and exactly why you did it that way. It looks to me like you use iTunes with standard preferences settings and you didn't so much move your media folder to the external drive as your whole iTunes library (everything in the top level folder including all the media files). This should have been done simply by copying the iTunes folder from the old drive to the new one, renaming the AllMyiTunesMusic folder if you so desire, then starting iTunes while holding down the option/alt key and selecting that folder as the iTunes library to now start using. Apart from the copy time when you could go away and drink a pot of coffee the actual labor time would be about 2 minutes. I think you must have done something different which has kind of messed up your library and resulted in duplication of files. Some of those folders such as Movies and the neighboring Music folder should be in the media folder, but don't move things about in Finder or iTunes may lose track of them and things will get worse. If you can go back and do things properly then I recommend you do so, otherwise we can see what we can work with here.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 and making an iTunes library portable.

Backup to external drive already used by Windows

Total Mac newbie who wants to back up a MacBook Pro.
I'd like to use one of the external drives I already own. The trouble is, they've been used for Windows storage already and so have that file system on them. They also have files and/or system backups I'd like to preserve.
Other posts here seem to say I can't even back up files from the Mac (let alone system images) unless I format the drives for OS X and use some kind of middleware on my PCs. I'd like to avoid that -- I still have 6 PCs running Windows and just the one MBP, so far.
Can someone help me understand what's really possible and/or recommended?
Thanks, in advance.

Drives used for Time Machine require GUID partition scheme.
These must have either the GUID or Apple Partition Map Partition Map Scheme, and either theMac OS Extended (Journaled) or Mac OS Extended (Case-sensitive, journaled) Format. On Lion, you can encrypt them. See question #5 for details and formatting instructions.
--from: Time Machine - FAQ: 2. What can Time Machine back up, and where can it put it’s backups?
Windows requires that GUID partition scheme not be obviously present.
You can store other files on a Time Machine drive, but Windows will not write to GUID drives.
New drives are cheap. Or combine some of your Windows stuff to free up a drive.

How to partition a 2TB external drive to use with TM for a 250GB backup?

My MBP only has a 250GB hard drive, but the new external drive is 2TB. I don't want to use the whole ext drive for TM back-up so what size should I create the TM backup partition so that I can use the rest for regular file storage? I saw a guideline in the FAQ that said you need 2-3x the size of the data back-up for TM. So is 500GB for TM and 1.5TB for storage a good size?
Separately, will TM recognize to use the correct partition once they are re-sized and there is a new partition on the ext drive?
Thanks

vpr80 wrote:
is 500GB for TM and 1.5TB for storage a good size?
i'm backing up three Macs to my 500 GB TC.
who needs two year old files ... let TM start clearing out the old junk earlier.
JGG

How choose which partition of my external drive I use for my network

Hi,
I just bought a Linksys E3200 router for my network house. The setup was easy and everything work fine... well.. almost everything. I have a Iomega 1To external drive whit 2 partition ; the first one is a mac os extend for my Time Machine backup and the second one is NTSF for sharing my picture and music. I use the cisco connect software for setup my storage whit my external drive but I can't see the NTSF part. I can write/read in my mac partition but I don't want to use that part on my network.
My question is : Can I have 2 partition on my network? If not, how can I choose the partition I wanna use.
Thanks.
PS: I'm sur you notice it but english isnt my first language, sorry if isn't clear.

ksu62 wrote:
The infection names are: classload.jar-719ef6a5.zip
                                          classload.jar-5db452le31.zip
                                          ar3.jar-6ce3b2f-45l483f.zip
                                          classload.jar-lef99412-63bsd3fl.zip
Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

Acomdata external drive MAC using SecureHD LogIn.

Similar Messages

Maybe you are looking for