ACPI failure after recent upgrade
Today I've upgraded mkinitcpio to 0.6 and removed klibc. But on next start ACPI failed with following messages, according to dmesg:
... [registered some buttons etc] ...
ACPI: AC Adapter [AC] (on-line)
ACPI: Thermal Zone [SKNZ] (24 C)
ACPI: Thermal Zone [BATZ] (23 C)
ACPI: Thermal Zone [FDTZ] (25 C)
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI Error: Needed type [Reference], found [Integer] ffff88007b22ab88 (20090903/exresop-104)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20090903/dswexec-445)
ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.FAST] (Node ffff88007b011400), AE_AML_OPERAND_TYPE
ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.PFN2._STA] (Node ffff88007b0116a0), AE_AML_OPERAND_TYPE
ACPI: Device [FAN2] failed to transition to D3
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88007b142510 (20090903/exresop-590)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20090903/dswexec-445)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BTIF] (Node ffff88007b01f380), AE_AML_OPERAND_TYPE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BTIF] (Node ffff88007b042e20), AE_AML_OPERAND_TYPE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BIF] (Node ffff88007b042f00), AE_AML_OPERAND_TYPE
ACPI Exception: AE_AML_OPERAND_TYPE, Evaluating _BIF (20090903/battery-363)
[i]ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)[/i]
ACPI Error: Needed type [Reference], found [Integer] ffff88007b22ab88 (20090903/exresop-104)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20090903/dswexec-445)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RPPC] (Node ffff88007b01f640), AE_AML_OPERAND_TYPE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q04] (Node ffff88007b01f4e0), AE_AML_OPERAND_TYPE
... [some more messages like these] ...
When system up, battery monitor (and files in /proc/acpi) says that no battery is present (see italic messages, theoretically battery is present), but DPMS and suspend work.
Is there any solution apart from downgrading? It's a big problem for me, cause I'm often using my laptop on batteries.
Looks like some magic (i.e., simple full system restart) helped. After that ACPI looks normal. Some errors still are in dmesg, but seemingly not critical.
Similar Messages
-
IBus failure after recent upgrade
Hi folks,
I recently moved to pure systemd as suggested, and I made other upgrades as well.
ibus is one of them, and unsurprisingly, it stopped working.
In the first place, nothing happened when I pressed the enable key combination (ctrl + space), which worked fine before.
I read ArchWiki and added some env variables to .bashrc, but nothing worked.
If I manually launch ibus-daemon, it says:
IBUS-Message: 11:23:28.878481: Engine xkb:us:altgr-intl:eng is already registered by other component
Then, I followed someone's advice and reverted to the previous version:
sudo pacman -U /var/cache/pacman/pkg/ibus-1.4.2-2-x86_64.pkg.tar.xz
My old configuration came back, when I checked ibus-setup.
But I still couldn't enable ibus.
Is this something related to things like GTK3 or so? I tried adding env variables like $GTK_IM_MODULE=ibus, in vain.
I don't mind reverting to old versions, as long as I can type in ibus again.
Thank you in advance.yungtrizzle wrote:Currently the ibus package does not ship with any input sources, those are packaged separately. Actually it seems the last update broke something unrelated to systemd.
Yes. For me it's seriously broken.
I'm using KDE.
yaourt -Qs ibus
extra/ibus 1.4.99.20121109-1
Next Generation Input Bus for Linux
community/ibus-chewing 1.4.2-2
Chinese Chewing Engine for IBus Framework
community/ibus-m17n 1.3.4-2
M17N engine for IBus
community/ibus-pinyin 1.4.99.20120808-1
Pinyin (Chinese) input method for the IBus framework
community/ibus-qt 1.3.1-5
IBus qt library and IBus qt input method plugin
It completely forgotten ALL of my setting including input methods I've chosen and shortcut keys.
ibus-qt obviously is not work with ibus-1.4-99
All ibus related windows are ugly as hell
None of my input methods work.
Now I'm going to try rolling back various different versions of ibus and the input methods to find something that works.
This is really a pain.
EDIT:
I should say I think the settings issue is something to do with gconf as I get this message trying to remove and reinstall ibus-pinyin and ibus-chewing
(gconftool-2:2059): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
/usr/bin/dbus-launch terminated abnormally with the following error: No protocol specified
Autolaunch error: X11 initialization failed.
Last edited by bhrgunatha (2012-11-11 03:48:56) -
After recently upgrading to Maverick my desktop computer and all other devices will not recieve emails from my IMAP account, it keeps asking me for a password which has never been changed in 8yrs, please help as it was my business account from so long ago and I use it for general 'stuff' and my 'me' account for personal
CheersSince it is affecting all your devices also, try going to the e-mail web site and seeing if you can log in there. Who is the e-mail provider?
Try deleting the pass word from Applications/Utilities/Keychain Access.
If that doesn't work, try deleting and adding back the e-mail account. -
After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.
May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them. -
Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?
What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/ -
After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.
After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same
Hello there, Kishoresaraogi.
The following Knowledge Base article provides some great steps to troubleshoot your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
After recent upgrade i lost the contacts icon on the screen
after recent upgrade i lost the contacts icon on the screen
Before doing a Reset (which will wipe out a whole lot of things that you have to reenter) check to make sure the Contacts app didn't simply get pushed to another page by the addition of the Newstand app to the first homescreen.
-
Lost all sounds except ringtone after recent upgrade
No sound except ringtone after recent upgrade followed by the upgrade fix. Since the ringtone was only affected I didn't notice immediately! If I plug in my headphones everything works. Unable to use volume buttons on side unless headphones are plugged in, the volume symbol with white dots doesn't even appear anymore. The volume control in itunes music only works when plugged into headphones otherwise it can't be adjusted. Worked with apple support tried everything include a restore to new still no go! It appears that a few people are having the same problem and seems weird that it happened after last upgrade!
If you are unable to adjust the volume without headphones even after restoring, then the iPhone thinks it's plugged into a dock or cable. This is the behavor that will happen if you plug your iPhone in to the car or iHome dock to play you music and sounds, but a docked connection will never play ringtones through the dock connection and headphones override that dock connection which is why your headphones work.
How does the phone think its connected to a dock? Well, this can happen if the charging port gets wet at some point or if some trauma happens in there like pushing the cable in when it doesnt fit, etc.
So it happens even after restoring what do I do? Service your iPhone. https://selfsolve.apple.com -
Time Machine Backups after recent upgrade to Mountain Lion
Basically to keep a long story short - i need to take my computer in for repair tomorrow. I recently did an upgrade to Mountain Lion a day or two ago. I haven't done a Time Machine backup until today (a couple days after i upgraded to Mountain Lion) because i wanted to make sure that my previous TM backup (Snow Leopard 10.6.8) was the most up to date and best update that i could revert back to if i had any issues with Mountain Lion, or any application compatibility, etc etc.
I don't have any broken applications and it seems like Mountain Lion is running better than Snow Leopard. However, as i said - i'm taking my computer in for repair tomorrow, i would like to know that i have the most up to date Time Machine backup with the new Mountain Lion so that when i restore it back from my Time Machine backup after i get it back from repair, i won't have any issues with the migration, which could potentially lead me into more technicalities.
I have a 500GB Harddrive, with about 70GB left of free space....I did the initial backup prior to upgrading to Mountain Lion, and it upgraded 400+GB of info, now, since Mountain Lion - the first backup with Mountain Lion initially said 46GB - then it went down to 14GB by the time it was all said and done....so what exactly did it back up?
Did it back up all the necessary files to keep Mountain Lion running smoothly when i restore it back to the way it was after i get it back? Did it not back everything up that it needs to? Is it safe to erase my internal drive and do a clean installation so i can take it in, and not worry about not being able to migrate things back over or applications not working correctly?
When i get it back, i presume it will come with Mountain Lion back on it and i can just boot up into the Recovery Disk and restore it from a Time Machine backup that way, correct?
Thanks for the help.
- JasonI received the same error and experienced the same issue that you have described but after performing a Time Capsule soft reset and then toggling the TM Off and then back On I was able issue a backup now and see my previous backups.
Here is the link to where I posted my fix; https://discussions.apple.com/message/19069543#19069543. Someone else had success using a different method. The only comment / complaint that I have since the ML OS X upgrade is that TM now takes at least 20 to 30 seconds before I can click/select a backup.
I hope this helps. -
Wifi state not remembered across reboot after recent upgrade
After a recent upgrade, I noticed that the wireless network is always on after the computer boots (I use NetworkManager in gnome, which I always use to turn the wireless off). Before that, the wireless is on only if I left it on before I shutdown the computer last time.
Are there people who are having similar symptoms or know the cause?
(I have a Broadcom BCM43142 card and use the broadcom-wl driver)May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them. -
Format lost when printing to Generic Text Printer after recent upgrade
We recently upgraded Crystal and now the texty file output from a generic text printer has losst its formatting.
The text appears like this:
S
u
m
m
a
r
y
There si an OD character after each letter.
Does anyone know what could be causing this?Hi Mike,
That is odd.... What happens if you check on the No Default Printer, save the report and then check it off, or the other way depending on what your original setting is?
If you create a new report do you see the same results?
Also, XI is no longer patchable but you can upgrade to XI R2 for free. Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
To enable the full XI R2 features locate the Keycode link and get a new one for XI R2.
Thank you
Don -
Beachball after recent upgrade
After I upgraded to the most recent release I am now experiencing an increased frequency of that beach ball. Anyone else experiencing similar. Please help.
ThanksBefore doing a Reset (which will wipe out a whole lot of things that you have to reenter) check to make sure the Contacts app didn't simply get pushed to another page by the addition of the Newstand app to the first homescreen.
-
after the most recent upgrade, my phone is telling me that my phone storage space is getting low, but there is plenty of open space.
now its not letting me send of receive texts. everytime i try i get a message saying "the process com.android.phone has stopped unexpectedly. please try again" then i have to force close.
also when i try deleting old texts it says the same thing and it takes me back to home screen@bennettj90,
I'm always sending and receiving text messages so I know how frustrated you must be and I'm here to help.
We have had other users getting the "Low memory or storage" message after the recent SW update and some are unable to send or receive text messages. We've found that performing a hard reset has resolved this issue. I know this can be a hassle, but this is the only way to fix the text messaging issue, as well as the "Low memory or storage" message.
Please post back if you need further assistance and I will be more than happy to help. -
Importing CDs after Recent Upgrade
After a recent upgrade I am unable to import CDs onto my Ipod. This seems to be a problem with I-Tunes. If I want to a warning message comes up saying I will lose all existing music which I don't want to do. Has anyone got any suggestions?
Hello again
Sorry. There actually is another option, but given the fact you are using an upgraded Word I figured it wasn't worth mentioning. The other option is to reinstall Word 2003 and use it alongside Word 2010. I'm not sure, but Peter Grainge may have info on his site on how to do this.
Click here to visit Peter's site
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks
Maybe you are looking for
-
Here's the problem: I am often in a building which has free wifi but the wifi requires that you accept the terms of use during every browsing session. If I receive a text message from someone who is also using iOS5, the phone seems to default to wi
-
how to clean my mac mini
-
N82 Seperating pictures and photo's
Hi all, I was wondering wether it was possible to seperate pictures and photo's in folders. When I go to gallery to view pictures and videos everything I placed in subfolders on my memorycard end up mixed up in there. Apparantly the software scans my
-
Left side of screen disappeared
What happened please? All of a sudden my Safari screen is smaller and there are no arrows in the top left corner togo back a page?
-
Error: Already marked for rollback
Hi, I am receiving the following error intermittently: javax.transaction.RollbackException: Already marked for rollback TransactionImpl:XidImplI am never explicitly marking any transaction for rollback. The Transaction manager code I have written is