ACPI Flash BIOS version 2.00 for Qosmio X770/X775 (PSBY5*)

I download the new version of the bios which toshiba send me to my mail in order to upgrade my system but on sunday I installed this bios and rhen my laptop turn off because I isntalled the new bios but since that day I cant turn on my qosmio!!! I press the button in order to turn on and when the logo of windows appear the computer stop

I have exactly the same issue. I followed all the instructions, as I did when I updated my bios five times before, and when i turn on the laptop i get two option either the windows repair which does nothing and start normally which freezes when the windows logo appears. This is extremely frustrating please someone address this issue. I have the fast boot option enabled for all its worth cause someone mentioned that in another topic on the 2.00 bios.

Similar Messages

Don´t start after install bios ACPI Flash BIOS version 2.00 for Satellite A215 (PSAFGU/PSAFHU)

After install this update doesn´t start anymore
it´s possible to install the previous bios?
Thank you

Phoenix BIOS Recovery by PETAR
Update: Boot-Block Jumper
http://rapidshare.com/files/14946637...ock_Jumper.pdf
This is the latest PHLASH16 I could find:
http://rapidshare.com/files/15674471...6.5.4.rar.html
Tool provided by @offon7544
Here is the Archive with all the files needed and How to for Phoenix BIOS Recovery.
Method 1.
http://www.box.net/shared/j2u98ci67f
How To:
1. Use HP USB Disk Storage Format Tool with MiniDOS files to make your Bootable: Flopy, USB Flopy, USB Flash Drive (Flash Drive works in rear cases).
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Stick, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Stick, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F)and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 2.
http://rapidshare.com/files/105952250/Metod_2.rar
How To:
1. Click on the Phoenix_Crisis_Recovery.exe to make: Flopy, USB Flopy.
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 3.
http://rapidshare.com/files/105952818/Metod_3.rar
How To:
1. Use HP USB Disk Storage Format Tool with MiniDOS files to make your Bootable: Flopy, USB Flopy, USB Flash Drive (Flash Drive works in rear cases).
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Stick, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Stick, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 4.
http://rapidshare.com/files/105953337/Metod_4.rar
How To:
1. Click on the Phoenix_Crisis_Recovery.exe to make: Flopy, USB Flopy.
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
The HP Tool is located in the archive of the first metod.
Use the metods in order form 1 to 4, unless you think otherwise...
Hope you never use this and if you ever have to GOOD LUCK.
Insyde Recovery
INSYDE BIOS RECOVERY METHOD added 28/11/2009
http://forums.mydigitallife.info/showthread.php?t=13095

ACPI Flash BIOS version 2.60 Update Problem cause Blank Screen on Qosmio X505-Q870 HELP Needed!

I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

Satellite E105-S1402 Running Hotter After ACPI Flash BIOS version 1.40

Hello,
First time poster. I bought a E105-S1402 yesterday from Best Buy. The computer was running at a comfortable tempture up until I updated the bios per the download and drivers page, http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=214052.... Now, the laptop runs much hotter. Does anyone else have the same issue? Is this something the bios update was supposed to do? Any advice/suggestions. Thanks!
Solved!
Go to Solution.

You might try to update your bios to v 1.5. It is the very latest bios update (late April 2009) for the E105-S1402.
My E105 does run a little hotter than my previous HP laptop, however, I have gotten used to it. I'm guessing the fact that the body is made of aluminum, rather than plastic, is the reason why it feels hotter. However, what we get with warmth as a negative, we gain in build quality and ruggedness as a positive.
As long as your laptop has not shutdown on its own, which would be an indication that the computer tried to save itself from damage due to excessive heat, then you are probably fine, albeit uncomfortable.

Any news about BIOS for Qosmio X770

Hi there,
have they said anything on a new bios. Complete and utter silence on the matter of a replacement for what poor excuse for a bios that currently is installed on this computer. Man please tell me someone can shed some light.
Thanks

Hi
The newest available BIOS for Qosmio X770 seems to be 2.10-win
It was uploaded at 07/12/12 so its not very old

Does the last flash player version works correctly for Adobe portofolio file?

I have a problem with some Adobe Acrobat portofolio files, they were created some months ago with Acrobat X pro version but right now can not be opened.
The first message that appears is:
"To view the Flash technology content in this PDF file, please install this version of Flash Player that supports Adobe Reader and Acrobat"
When I select the option for more info appears:
Online content cannot be displayed.
I installed the most recently Flash player version but the problem is the same
Actual Flash player installed version: 11.7.700.202
OS: Windows XP 32 bits
Browser : Internet Explorer version 8.0.6001
Somebody have any idea?
Please let me know, these files are really important for my work.

There is a separate installer for using Flash with Acrobat.
http://helpx.adobe.com/acrobat/kb/reader-acrobat-flash-player-download.html

Drivers for Qosmio X770-123 needed

Hi,
i have recently installed a new version of Windows 7 on my Toshiba Qosmio X770-123.
When the system first started up, i noticed that, obviously, no Toshiba programs were installed and also no drivers for anything.
Right now neither my fn-key, nor my W-LAN chip are working.
I need the drivers for my Notebook, because the W-LAN driver for this product in particular is not available for download right now.
Thanks in advance!
Tih

http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
Notebook
Qosmio
Qosmio X
Qosmio X770
PSBY5E
Win 7 64bit
to download the Atheros WLan driver visit this Toshiba WLan portal:
http://aps.toshiba-tro.de/wlan/
voil

What is new in BIOS Update v2.20 for Qosmio G40

Hello,
Does anyone update the BIOS of his G40 to v2.20? Do you know what is new in this version?
Thank you.

I found something which can be answered for new features for BIOS 2.20
1.Increases the Stability and performance of Penryn CPU.
2.Increases the Stability and performanceof ICH-8M southbridge.
3.Increases the stability and performanceMobile Intel 965 Express Chipset.
From point 1,we can see that the BIOS 2.20 support penryn CPU which is T8xxx series CPU,i'm trying to find one top of the range T7xxx series CPU which is X7900 to fit on my qosmio G40.
I will post some pictures and steps once i've done ti.

What is VRAM in new BIOS 1.4 for Qosmio X770?

for 770 series
about to download now!!!
what is VRAM ?
Version 1.40 - 2011-10-29
Added: Hynix b-die VRAM support.
Release Notes
For CD-ROM BIOS updates: Type BIOS then press enter at the C:\ prompt.
For all updates: After the update completes, the computer will automatically shut down or restart.
Power on the computer if it is off.
While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

im not going to install this bios, until someone confirms the throttling problem has been resolved :P

Flash plugin version, which level for variable text?

I've built a cd-rate banner for a bank client and designed it
so that the client can make changes to rate, dislaimer and the like
via referenced text file. it works fine for some, but on some
machines (both at the bank and at home-machines of bank staff) only
the non-variable elements show up. I've added a flash detector that
looks for version 6 or better and if not spits to a non-flash
version of the page.
My worry is that I don't really know at what point I'll be
safe. Any comments? Thanks.

chidwack wrote:
> I've built a cd-rate banner for a bank client and
designed it so that the
> client can make changes to rate, dislaimer and the like
via referenced text
> file. it works fine for some, but on some machines (both
at the bank and at
> home-machines of bank staff) only the non-variable
elements show up. I've
> added a flash detector that looks for version 6 or
better and if not spits to a
> non-flash version of the page.
>
> My worry is that I don't really know at what point I'll
be safe. Any
> comments? Thanks.
could it be that the dynamic text has no font outlines ?
Perhaps including outlines will assure it appears on every
computer
or using device font _name and let computer choose for
itself.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Looking for bios version 1.7 for K8N Neo4 FI - plz help, it's urgent

i bought myself a new K8N Neo4 FI yesterday together with a msi nx6600gt and an A64 3200+ Venice e6 and when i booted up the bios said i had 1gb of ram @ ddr266 in single channel mode. i tried to set it to 200mhz ddr but it wouldn't go so i installed win xp anyway and when i tried to run 3dmark i got artifacts all over. someone suggested that i downgrade to 1.8 so i did and my artifact probs went away so now i still have to deal with my memory and for that someone else suggested to me that i downgrade to 1.7 until the next bios comes out so i tried looking for version 1.7 and after about 4 hours of searching i still have nothing to show for it. can someone plz plz plz tell me where i can find it???

Not to mention if you're gonna buy a 2nd power supply, why not buy one good enough to feed all of that hardware. Good reliable brand name PSUs aren't as costly as some might think, it's actually a rather cheap price to pay for peace of mind.
As for knowing if it will solve your problem or not, we can't garantee, you might have more than one problem in your system. The PSU is definitely a problem, but there is no garantee everything will suddenly fall into place after you change it.

Where can I find BIOS version 1.9 for my Satellite A 60?

Hi,
I have a Satellite A6-692, Model : PSA60E.
I find on your site the link for many BIOS for this notebook.
I try each url but every url are dead!
Could you repair these links? (http://support.toshiba-tro.de/tools/bios/satellite/a60/win/bios-190win.zip)
Any body have saved this BIOS?
Thanks,
Mikael

Hello
Probably is known to you that companies as Toshiba do from time to time planned maintenance with servers and all saved data. I am pretty sure it will work again very soon.
As alternative you can visit follow page http://aps2.toshiba-tro.de/?page=bios
Bye and good luck!

Qosmio X770 107 PSBY5E Bios2.10 2nd SATA3 is where? +sudden shut-downs

The history of fails:
After 2 years the second HDD (non hybrid) made noises and died a week later. System on C: (Master HDD) was running good (still was the original pre installed one from factory).
I decided to upgrade to an Samsung Evo 840 500gig SSD by cloning the Hybrid HDD on the Prime/Master channel. It cloned the original perfectly and I swapped the discs like this : The SSD stayed in the Notebook on the master channel and the still good working HDD in the box with spare parts to have a emergency disc for future....
like this it worked nearly 8 months perfectly. Then frequently an alert window opened with the message that the RAM will be full soon giving the advise to close some application. With the MS tool "Resscoursenmonitor" I had to kill the processes of svchost.exe and sometimes spoolsv.exe to get the load down by 50% and I could work on till next day the alert window was returning. I did run MS updates more frequent now because skype started crashing now every time somebody called me. At this stage sudden shutdowns (without blue screen) occurred with a followed reboot. There was no intervals for these deaths obvious - sometimes 5 times a day, sometimes not at all.
The system protocols showed at the timestamp of the crashes a mistake named " Kernel-Power ID41" which is not helpful. Hardware or Software problem ? To find this out, I took the original HDD and replaced it for the SSD. The first day nothing happened, maybe because it was mostly idle, so on the next day, I started to make the pc work with all the updates from the last 10 months including Skype, Java etc..... On the 3rd day it started crashing with Blackscreen as well and rebooted nicely.
A last final test should bring up confidence that it is a software caused failure: HDD out - and SSD back in, BUT on the 2nd SATA channel. A miracle - nothing happened for a week - it was just fine. Happy End ?????
With Samsung Magician quickly testing the behaviour of the SSD on this channel, I saw that the channel can do only SATA2 and bottlenecked the SSD.
According to the Intel specification page, the chipset provides up to 6 SATA ports at 3 Gb/s with up to 2 ports supporting 6 Gb/s transfer rates. Also the CPU should support the SATA III but where is the second SATA3 channel ?
Could it be the blue-ray-optical drive ?
Who knows where the second SATA3 channel is hiding??????
Does someone have the same Problems with this sudden shut-downs ?
Does anyone have the same Problem with Memory getting to full?
The manual doesn't give information about it - >> on the Master Channel the SSD gives, according to the Magician Tool, 6 Gb/s BUT after a few hours running Sandra2015 burn-in-test it hard crashed again.
Please apologise for this many lines - but sometimes a full picture is needed.
OS: Win 7 64bit / 8 gig Ram / I7 2630QM Prozessor

The history of fails:
After 2 years the second HDD (non hybrid) made noises and died a week later. System on C was running good (still was the original pre installed one from factory).
I decided to upgrade to an Evo 840 500gig SSD by cloning the Hybrid HDD on the Prime/Master channel. It cloned the original perfectly and I swapped the discs like this : The SSD stayed in the Notebook on the master channel and the still good working HDD in the box with spare parts to have a emergency disc for future....
like this it worked nearly 8 months perfectly. From now on frequently an alert window opened with the message that the RAM will be full soon giving the advise to close some application.
With the MS tool "Resscoursenmonitor" I had to kill the processes of svchost.exe and sometimes spoolsv.exe to get the load down by 50% and I could work on till next day the window was returning.
I did run MS updates more frequent now because skype started crashing now every time somebody called me. At this stage sudden shutdowns (without blue screen) occurred with a followed reboot. There was no intervals for these deaths obvious - sometimes 5 times a day, sometimes not at all.
The system protocols showed at the timestamp of the crashes a mistake named " Kernel-Power ID41" which is not very helpful. Hardware or Software problem ? To find this out, I took the original HDD and replaced it for the SSD. The first day nothing happened, maybe because it was mostly idle, so on the next day, I started to make the pc work with all the updates from the last 10 months including Skype, Java etc..... On the 3rd day it started crashing with Blackscreen as well and rebooted nicely.
A last final test should bring up confidence that it is a software caused failure: HDD out - and SSD back in BUT on the 2nd SATA channel. A miracle - nothing happened for a week - it was just fine. Happy End?
With Magician quickly testing the behaviour of the SSD on this channel, I saw that the channel can do only SATA2 and bottlenecked the SSD.
According to the Intel specification page, the chipset provides up to 6 SATA ports at 3 Gb/s with up to 2 ports supporting 6 Gb/s transfer rates.
Also the CPU should support the SATA III but where is the second SATA3 channel ?
Could it be the blue-ray-optical drive ?
Who knows where the second SATA3 channel is hiding?????? The manual doesn't give information about it -> on the Master Channel the SSD give, according to the Magician Tool, 6 Gb/s BUT after a few hours running Sandra2015 burn-in-test it hard crashed again.
Please apologise for this many lines - but sometimes a full picture is needed

Satellite L875D Missing BIOS version?

Foreword:
The current OS I'm running is Gentoo but I have the original Hard drive and OS that came with the laptop (mostly) untouched.
System Information
    Manufacturer: TOSHIBA
    Product Name: Satellite L875D-S7332B
    Version: PSKFQU-008003B
    Original OS: Windows 8
    Original BIOS version: 6.30
    Current OS: 3.16.3-Gentoo
    Current BIOS version: 6.10 (modded)
I got this laptop refurbished from the manufacturer around August of last year. The BIOS version as I when I got it was 6.30, a version not listed on the official download page, here). Around August of this year, I decided to make full use of my laptop and install Gentoo, a linux distribution. Granted, I had a couple of problems especially video and the keyboard controller but I got those issues eventually resolved. One issue that alluded me was a firmware bug caused by putting the computer in S3. To resolve this, I decide to flash the bios to a previous version: 6.10. What I did not anticipate was virtualization support being removed by this downgrade. I know for a fact this computer can support VT as I was doing Windows based schoolwork in a VM using KVM (a linux based usage of virtualization extensions made available by the processors) for about 3 months prior to this downgrade. The CPU also shows the svm and svm-lock flags (flags belonging to AMD which indicate the CPU does indeed support virtualization.) The original and modded versions of the 6.10 bios for models C870D/C875D/L870D/L875D both acted the same.
In my research in trying to fix this problem, I've made note of a few things:
During the downgrade, the my flashing program warned me that the bios version I was going to flash to (6.10) was bigger than the original contained on the BIOS chip (I can't remember what it exactly said but I remember that it gave a hex value of both versions saying that the new one was something like twice as big.)
Model L875D machines with BIOS version 6.30 truly exist as evidenced by the following links (As far as I can tell, most if not all these tools take their information from the DMI table aka SMBIOS.):
[SEMI-SOLVED]RTL8188CE Wireless card is not working right       Related information is the third post. (taken from the output of inxi, a system information viewer in linux.)
[Toshiba Satellite L875D-S7111] Monitor does not come back after suspend. Related information is in the first post.
(Alternately here as in the bugreport listed as file "BootDmesg".)
Sims 3 Won't Start, Graphics Issues, Windows 8 related? Related information is at the top of the page(DXDIAG)
WoW Freezing Related information is in third post (DXDIAG)
Toshiba forums: "cant update my BIOS 6.70" Interesting dialog between people on this forum and user..
A different model (C870D/C875D, models which are also on the BIOS download page of the L875D and presumably from the same "family") has the VT extensions enabled by default:
ACPI Flash BIOS version 6.30 for Satellite C870D/C875D (PSCA2*/PSCBE*)
(I've modded the 6.10 version's tabs to show and allow changing of the VT setting: changing the value does absolutely nothing and my system still reports the bios as having it disabled.)
As a summary, here is what I've collected about this "missing" bios:
Has a version of 6.30
Built on or released 12/06/2012 (Presumably MM/DD/YY as I believe this laptop is a US version)
Does not exist seem to exist on any public Toshiba support page
Working Support of virtualization is possible.
Possibly a half the size of the 6.10 bios version.
Still has firmware bug present in 6.10 (an example of this firmware bug can be given upon request.
Access to any of my logs is available on request (Windows or Linux).
Final thoughts:
I'm assuming the missing bios is either something installed by a refurbishing department or it is official and was just never posted to the main support page. In any case, I'd like to get my VM back up and running as I'm somewhat dependent on it to do my course work as most of my notes and books are on the gentoo drive.

I have been finding the fan annoying too on this model.(a500-1gl psar9e)
When i am gaming it will kick in after a little to a speed of 90% according to the health monitor. It will shh again after a period of time but will start up again. This behavior seems to happen more frequently now. When i first got the notebook (feb 2010) the fan hardly ever kicked in fast even with prolonged playing.
Oddly enough if the fan kicks in and i bring my browser window over the gaming window the fan seems to slow down again. Could be a strange coincidence?
Anyway i contacted toshiba and they have told me to upgrade my bios and my display drivers. Been also suffering the driver failure problems that is know for this notebook. I plan to do this on monday and hope it fixes the issues. so will try and update you to that outcome.
Its frustrating to have this one annoying issue ruin a good notebook.

Downloaded and installed Flash Bios and for some reason an error occured, not computer wont boot!

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=136412...
THeres what i downloaded, shortly after i tried to restart my comp but it was all frozen. I used the button to turn it off and when i turn it back on its all black. Nothing happens, it just sits there. What the ****? This is the biggest bull that has ever happened.
How can u download an update and now ur computer is useless? Any ideas? Thx.

I have a P105-S6024
I downloaded the Flash Bios
03-04-2009 BIOS
ACPI FLASH BIOS 4.70 for Satellite blah blah blah.
While it was working the install got frozen and my comp froze. So i turned it off with the button and it never came back on. Well the screen is black, the fan works, the icon that looks like a cake blinks and then turns off.
I dont understand. Toshiba said i might have to replace motherboard? WTF! Are you serious my computer was fine before this. I was just playing Killing Floor everything was going great and i decided to update some stuff. I really wish i didnt do this man, this is bull. I dont have the money to fix this right now if it is a motherboard problem.

ACPI Flash BIOS version 2.00 for Qosmio X770/X775 (PSBY5*)

Similar Messages

Maybe you are looking for