"ACPI Tables not in Reclaim Memory"

What do it mean?

<< Warning: ACPI tables not in reclaim memory >>
1.This means that your Intel Motherboard supports ACPI Functionality.
2. ACPI (Advanced Configuration and Power Interface) is an open industry specification co-developed by Compaq, Intel, Microsoft, Phoenix, and Toshiba.
3. ACPI evolves the existing collection of power management BIOS code, Advanced Power Management (APM) application programming interfaces (APIs, PNPBIOS APIs, Multiprocessor Specification (MPS) TABLES and so on into a well-defined power management and configuration interface specification.
4. The specification enables new power management technology to evolve independently in operating systems and hardware while ensuring that they continue to work together.
I have experienced a similar problem on my Intel Pentium III (1GHz) system. This may be an issue of hardware compatibility. This is all i can say about ACPI.
I have tried the following procedure on my machine, but i haven't been successful in getting rid of this warning you have mentioned. My machine boots fine and Solaris works fine, inspite of this warning.
Please go throught the following:
How can I disable the ACPI in the Solaris 8 Operating Environment for x86?
If ACPI is disabled through the BIOS, the warning can be avoided. However, this disables all ACPI functionality.
Hence, Disable ACPI by either:
% eeprom acpi-user-options=0x2
OR
By editing the /boot/solaris/bootenv.rc file (or equivalent on the boot floppy) and adding the line:
% setprop acpi-user-options 0x2
The value 0x2 disables the ACPI functionality, whereas the value 0x0 enables the ACPI functionality.
Please let me know if this works.

Similar Messages

Warning ACPI tables not in reclaim memory

Hi,
When booting the system from a DCA i was getting an error
Warning: ACPI tables not in reclaim memory
prom_panic:Kmem_free block already free
Entering boot debugger
[12ff05]
To get around this problem I downloaded the patch 110930-03 and made a image copy diskette of it and rebooted the system but it still gave me the same error.
Then I appended the line
setprop acpi-user-options '0x2'
at the end of bootenv.rc and rebooted the system but still it did not work.
I have a dell dimension 4100 system with P3 and 1GHz of RAM.It as a 40GB Hard disk of which I am using 15GB for windows 2000 server which is installed on the primary partition and rest of the space is still not partitioned.
If anyone else has come across the same problem please let me know the workaround otherwise I will have to return the computer and buy another one.
Thanks
Anurag

Interesting - usually this is a harmless (I believe) error message
and doesn't affect operation - getting kicked into the debugger is
new to me.
Can you please let us know your HW config - system/mobo type and BIOS version please - I believe Sun engineers are working on this.
Tks

ACPI Tables not in Reclaim Memory, panic[cpu0]/thr

I try to do exactly the same. I do not think that the solution is to disable ACPI or to install Solaris 7.
The Steps I did:
I also get the WARNING messages when starting with the installation CD #1 (not the setup CD):
ACPI Tables not in Reclaim Memory
and in Bus Enumeration
Warning: Resource Conflict - both devices are added
The device is PNP0C01.
So far, so good, warnings are not errors.
then boot the solaris kernel from CD#1
type in the following:
b kadb -d<enter>
:c<enter>
the result is the following:
panic[cpu0]/thread=fec17540: BAD TRAP: type=d (General Protection Fault) rp=fec12a94 addr=0
General Protection Fault
pid=0, pc=0xfe80f2f6, sp=0xfe808eb6, eflags=0x10002
and so on.....
Do you have any solution?
kind regards
adrian

On usenet, you've at least mentioned that the system uses
a pentium 4 cpu. That is not supported under solaris 8
(yet).
Search this forum for "pentium 4" discussions. There's
a kadb patch posted that apparently allows installing
solaris 8 on a pentium 4 system.

ACPI Table not in Reclaim memory error, HELP!!!! please

Totally new to this, only used Solaris on a Sparc.
The CDROM is in the drive, it boots up at startup and says
"SunOS Secondary Boot Version 3.00
Warning: ACPI Tables not in Reclaim memory
prom_panic: kmem_free block already free
entering boot debugger:
[130ee5]:
please tell me how to fix this someone, i have a maxtor 20gb drive which i have just fdisk'd to get rid of the windows environment, so there are no partitions on the hard drive anymore.

There is a bootable diskette that does not use the ACPI information that can be downloaded from Sun. Check the patches for Solaris intel and find the bootable diskette patch. I cannot remember the patch number off-hand. Hope this helps

Solaris 8 on Dell Dimension 4100 (**ACPI Tables)

I downloaded Solaris 8 Binaries and created Device Configuration Assistant bootable diskette. When I try to boot up my system (Dell Dimension 4100) with the bootable diskette I created to install solaris on one partition, it pops up an error message before the device configuration assistant gets loaded. It says
WARNING:ACPI Tables not in reclaim memory
prom_panic:kmem_free block already free.
Could anyone guide me how do I get over it??

After thrashing for 2 weeks with the onboard 7880 SCSI and onboard 7890 RAID controllers, I was finally able to load up Solaris 8 on a Poweredge 2400. (4/01 build)
The only way I was able to do it was configure the server as below:
7880 SCSI: CD-ROM drive only device on this controller, set to ID 5.
7890 RAID controller: Disabled. Dont' believe Dell or Adaptec, this card will not work with Solaris 7 or 8. Even with the RAID chip removed and running as standard SCSI controller, it still would not work.
Adaptec 2940 U2W: 9G Quantum Atlas V drive with HP SureStore DAT 24i drive.
PERC II RAID controller yanked out of older 4100 system, 3 drives running RAID 5.
Important note: Do not attach anything to the 7880 controller besides the CD. The system will not boot if attempting to boot to the HD or if you attempt to boot from CD, it will hang at the adp.bef file.
Hope this helps..
Mike

ACPI Tables, prom_panic, kmem_free

Need help with Solaris 8 install. Had no trouble on an AMD K6-3, but now need to install on a different machine. Trying to install on a Dell Dimension 4100. I boot off the CD and get a message like:
Warning: ACPI Tables not found in Reclaim Memory
prom_panic: kmem_free already has blocks already free (this last part is almost word for word, I am going off memory here). The system then goes into debugger mode. I am forced to reboot. Can't get past this point (i.e. no files installed, since I'm stuck at booting of the CDROM).
I thought it was the graphics card, so I swapped out my ATI Rage 128 pro for a Matrox 32MB G400 (That's the graphics card I had on the system that I got Solaris to work on). But, same message. I'm wondering if it's the motherboard or the memory (motherboard is 815e Intel, memory is PC133). The computer is a PIII 733MHz, 128MB RAM, 20GB HD. Let me know of any advice!!! Thanks in advance!!!
- jamil

I am also having this problem with a Dell Dimension 4100. The exact error message is:
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
There is a current post on alt.solaris.x86 from someone who has the same problem who has said Sun's advice was that it may be related to BUGID 4366007 and to use Solaris 7.
I don't have access to the Sun database though, so can't shed any further light. Any information on this very gratefully received... Nick - [email protected]

ACPI tables, Resource conflict, Dell Dimension 8100 - need Solaris 7

I just bought a new Dell Dimension 8100 and I am getting the same error as SunilPP, "ACPI tables not in reclaim memory" and "Recourse conflict, both devices are added NON ACPI device ...".
One of the solutions suggested on this forum is to install Solaris 7 and upgrade to 8. Does anyone know where I can download Solaris 7 for Intel?
Thanks,
mraible

Solaris 7 is not available on line. This can be purchased on-line at www.store.sun.com or 1-800-sun-0404.
BTW, I don't believe you can upgrade to Solaris 8. The ACPI support code was introduced in Solaris 8 -- part of DCA (Device Configuration
Assitant) code where it provides additional PCI device info if the
motherboard supports it. This WARNING: ACPI Tables Not In Reclaim
Memory is a bug yet to be fixed.
You could load Solaris 7 and wait for the fix, then load a new OS which
has the fix.

DV7-4069wm ACPI table reset/recovery

I have been unable to reset my acpi tables to factory defaults (firmware, not software).
They were modified remotely via rootkit on win7 and BIOS was flashed backwards to F23 from F28.
I cannot determine if I am running on flashed bios or a shadow variant as BIOS admin is locked out from all advanced features.
I am no longer able to do a recovery BIOS flash with win+b keys either from a EFI util created USB key or HP_TOOLS drive partition, nor a prepared efi HP_TOOLS CD. "remove any disks and press any key to reboot" message, which does not reboot - requires power reset. No BIOS recovery screen at all, simply disk/usb seeks, then message. Using the four arrow key combination, did result in a seemingly successful forceflash update of BIOS stamp, however did not display any BIOS recovery screen, nor fan speedup as expected during a classic flash.
In old win64 premium install, user admin context was overridden, and due to acpi injection any reinstall on windows is also compromised. In windows with SVM disabled in BIOS, all ata/usb runs via usb subsystem drivers, in Linux it always does. With SVM enabled in BIOS, windows reports ATA drivers, however ATA disk to disk traffic in either OS maxes out at 20Mb/s - usb2 speeds.
In Ubuntu 12.04 I see cyclic processes running with no userid, no pid which may correlate with bootlog messages of cwd, cmd as the kernel comes up. I also see iterative ip scans from link-local to active wlan0 in the upper UDP ranges. IE. my hardware is scanning my (whichever) OS. When booting with a Hiren's boot CD in minixp - process explorer reports 12,000 lsass.exe listings (via buffer overflow access) by the time I can get it open. This happens with NO HDDs at all and continues until the system BSODs. This is not a hardware problem...
I have pulled the cmos battery and generated a cmos checksum error and subsequent reboot, but cannot rid my machine of this malware. While I suspect it is in fact a variant of this:
Deactivating BIOS rootkit
I cannot confirm this and until it is removed the machine remains unsecured despite locked down ubuntu denying access. Hardware doesn't need to ask permission after all, and even ubuntu doesn't report hardware processes not under it's control.
So, my questions are:
1) How can I access the advanced BIOS menu on my dv7-4069wm (f10 then 'A') is fail.
2) Are ACPI tables updated via BIOS flash?
3) Are ACPI tables erased with CMOS battery removal?
4) How can I ensure my BIOS is not shadowed while reflashed with no BIOS menu to disable it?
5) How can I disable (or reset to dormant) the absolute firmware embedded in my bios for theft recovery because it seems like someone has stolen my hardware from my control. While this was purchased legally, troubleshooting this problem may have produced a similar race condition to activate computrace, or it may be the vehicle for my problems.
I have tested memory thoroughly, tried four (two new) HDDs, zero'd MBR w/live ubu cd between installs.
I welcome any input on this (links please) but leave this as a warning in the event I do not see any.
There is BIOS malware out there, and even the stuff with best of intent (link above) holds little encrypted/authenticated security that it may be easily circumvented and taken over. I'm not looking to convince anyone, rather seeking help from those who understand the problem (or any portion herein). It seems many remain in denial that this can happen to them, and honestly it may have and you would never know until remote folks got sloppy (In my case rootkit w/popups - they got greedy)
TIA
-Hyar

Further History:
At one point I was (it seemed) able to flash using the win+b keys, and even successfully flahsed the version stamp using the arrow key "forceflash". The platform.ini it appears has no bearing on this type of flash however as it's not necessarily there and as such the "rom protected areas" reported by BIOS (and currently under remote owner control) do NOT get updated.
There is provision for updating portions of ROM including those reported protected using the platform.ini file called by the insyde win-flash tool, however it seems those now in charge have made provision to handle this.
In my user rights curcumvented windows, I am able to run the BIOS update extraction tool (runas admin), and subsequent insyde flash utility all at once (decompress, and run via selfex package). No success as defaults are either being burnt to inneffective ghost ROM, or the default platform.ini file does not flash protected areas including acpi. If however, I edit platform.ini changing ANYTHING (even one flag) - the OS reports incompatibility of flash tool.
I prepared an SD card (only way to write lock the HP_TOOLS folder) and a win+b recovery flash boot will seem to switch to flash mode (no screen bios load) but will not recognize the flashfile, or fails to flash it.
With an ubuntu live cd, any creation of a fat32 usb drive was thwarted when the filesystem was named "HP_TOOLS" as it was rewritten to "HP_TOOLS nA" on save. Nice catch, hacker.
Futher, There are mutliple ACPI entries for "BIOS read, BIOS write which I cannot seem to confirm should exist in ACPI at all.
Currently running laptop with no battery and cmos battery out.
This is a nasty tick and well burrowed.
I don't know who is reading this, but I hope it helps someone.
If you have a clue/hint/lead to offer I do welcome another perspective.

Overwrite FACP ACPI Table to Fix Missing ASPM

I have bought a HP EliteBook 2570p notebook. The energy consumption is a bit high because HP has disabled ASPM in the ACPI FACP table. As described here http://forum.techinferno.com/hp-busines … #post38399, this problem can be solved by overwriting the wrong values. I think the person there is using a FreeDOS environment before booting the other operating systems to write directly in the memory. I though it should also be possible to load a patched FACP table like a patched DSDT table. So I extracted the table:
acpidump > acpi.dat
acpixtract -a acpi.dat
iasl -d facp.dat
In facp.dst I changed the value 'PCIe ASPM Not Supported (V4)' from 1 to 0 and recompiled the table:
iasl -sa facp.dsl
This results in facp.aml, which I copied into /boot.
In Grub, I tried to load the new table with the entry
acpi /facp.aml
before the linux line.
After booting, unfortunately the new table is not loaded when I extract the ACPI tables again.
Does someone know if it is not possible to load a fixed FACP table in Grub? If it's not possible, is there an other way to fix this problem?
Edit: I have tested now the Grub acpi function with a modified DSDT table. This doesn't work, either. So I think it's a problem with Grub.
Last edited by Ununnilium (2014-11-24 09:03:27)

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059

I just updated Window 8.0 to 8.1 for the second time as the first Time there was an UEFI issue... the 8.1 installs and update seemed smooth... I shut down, and I leave for work. I come home fire up my PC it seems slow!! it boots...
I notice some live tiles are active I prefer mine off so I shut off a couple Live tiles. so then I decide to open the Mail tile and it locks up... and then one of my browsers freezes up!!! I could not open task manager at all to end the
proses, so I decided to restart and then an app was not allowing windows to restart!!! so windows ended the task on its own could not make out what program or app it was!!! and the machine booted up slower again. I went into the event viewer
and what do I find in there is this stuff and now looking at it this all started after the windows 8.1 update... I get it we all want the latest and greatest OS but as my mom said good things come to those whom wait don't rush into anything!!!
and I think Microsoft you are rushing to push stuff out onto the Market... so now I have to sit here and wonder why my PC now takes 2 + minutes to load!!! (BS) and on win 8.0 it took 60 seconds... fix this please I will watch and see if
this happens again if it keeps up I will have to once again revert back to 8.0 and at that point I will want some $$$ compensation for my loss... why should I have to go through hoops for something with the word Mircrosoft attached to it...
I wonder how many others have had this same issue and don't even know its happening....
1.
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
2.
taskhostex (2888) WebCacheLocal: The shadow header page of file C:\Users\Dale\AppData\Local\Microsoft\Windows\WebCache\V01.chk was damaged.The primary header page (4096 bytes) was used instead.
3.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{362b48de-4382-11e3-be6e-3085a9a945d8}#0000000000007E00.
4.
Driver detected an internal error in its data structures for
5.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: e14
Start Time: 01cf3eb70280ca6e
Termination Time: 4294967295
Application Path: C:\WINDOWS\syswow64\wwahost.exe
Report Id: f7b4be2f-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: Microsoft.SkypeApp_2.0.0.5011_x86__kzf8qxf38zg5c
Faulting package-relative application ID: App
6.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 15bc
Start Time: 01cf3eb66f89a193
Termination Time: 15
Application Path: C:\WINDOWS\system32\wwahost.exe
Report Id: 0fd54265-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: microsoft.windowscommunicationsapps_17.4.9600.16384_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.WindowsLive.Mail

I have the something similar happening as reported in event viewer in the warning section:
System
- Provider
   [ Name] Microsoft-Windows-Security-SPP
   [ Guid] {E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
   [ EventSourceName] Software Protection Platform Service
- EventID 1058
   [ Qualifiers] 32768
   Version 0
   Level 3
   Task 0
   Opcode 0
   Keywords 0x80000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T04:35:49.000000000Z
   EventRecordID 80761
   Correlation
- Execution
   [ ProcessID] 0
   [ ThreadID] 0
   Channel Application
   Computer Monzworks
   Security
- EventData
   0xC004F059
installation of the proof of purchase from the acpi table failed 0xc004f059
My System Properties page says "Windows is activated" and a product Id is displayed. I am on a window 8.1 core OS after applying the update successfulling from Window 8. My computer is an AsusTek Computer Inc. ,
Asus Desktop PC CM1745 Series - 64-bit Operating System x64-based processor.
I had trouble with AODDriver4.2.0 causing errors because the system could not find the path, It turned out to be uncleared program remnants in the registry were looking for an old version of the driver, in the wrong place , instead of the current one.
Oh, and I tried sfc/scannow and DISM /Online /Cleanup-Image /RestoreHealth from elevated cmd prompt and elevated powershell ise everthing was reported with no errors and with powershell, the report said windows store corruption was repaired.
Before this I had used apps.diagcab and it said my IE 11's temporary internet files folder was in the wrong place that it was going to put it back. Well, it messed up my IE 11 so the folder location was in the same place but it was not listed in the
location:                 . <----- Just like this. Plus the amount of disk space available was 8mb-which messed up any sort of operations for example putting in a new search
engine could not be completed. I had to use a system restore.   I currently have no errors showing up but warnings yes. thankfully most are minor.This is the other event viewer report which could be related:
- System
- Provider
   [ Name] Microsoft-Windows-Security-Auditing
   [ Guid] {54849625-5478-4994-A5BA-3E3B0328C30D}
   EventID 5061
   Version 0
   Level 0
   Task 12290
   Opcode 0
   Keywords 0x8010000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T03:48:26.671362500Z
   EventRecordID 290021
   Correlation
- Execution
   [ ProcessID] 676
   [ ThreadID] 728
   Channel Security
   Computer Monzworks
   Security
- EventData
SubjectUserSid S-1-5-21-4255092528-2166032690-2543152005-1002
SubjectUserName Monz Prez
SubjectDomainName MONZWORKS
SubjectLogonId 0x239d9
ProviderName Microsoft Software Key Storage Provider
AlgorithmName UNKNOWN
KeyName CD1CC265-0DA0-4230-8419-CB6F808FE688
KeyType %%2500
Operation %%2480
ReturnCode 0x80090016
I am tired so talk among yourselves.
Sincerely Tired

Azure Diagnostics - WADLogs Table not created

I am trying to log the information whenever user perform some operations in a WebRole in cloud environment. In emulator it will write the info in output window, but in azue portal I cant see the info anywhere. I have enabled the azure diagnostics and provided
the azure storage credentials, but the azure WADLogs table not getting created. This how I write the log "Trace.TraceInformation("Policy started");". Also used TraceSource to write the info to the log,but no luck.
my diagnostics.wadcfgx file contents below
<WadCfg>
<DiagnosticMonitorConfiguration overallQuotaInMB="4096">
<DiagnosticInfrastructureLogs scheduledTransferLogLevelFilter="Verbose" />
<Directories scheduledTransferPeriod="PT1M">
<IISLogs containerName="wad-iis-logfiles" />
<FailedRequestLogs containerName="wad-failedrequestlogs" />
</Directories>
<PerformanceCounters scheduledTransferPeriod="PT1M">
<PerformanceCounterConfiguration counterSpecifier="\Memory\Available MBytes" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\ISAPI Extension Requests/sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\Bytes Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Requests/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Errors Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Queued" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Rejected" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Processor(_Total)\% Processor Time" sampleRate="PT3M" />
</PerformanceCounters>
<WindowsEventLog scheduledTransferPeriod="PT1M">
<DataSource name="Application!*" />
</WindowsEventLog>
<CrashDumps dumpType="Full">
<CrashDumpConfiguration processName="WaAppAgent.exe" />
<CrashDumpConfiguration processName="WaIISHost.exe" />
<CrashDumpConfiguration processName="WindowsAzureGuestAgent.exe" />
<CrashDumpConfiguration processName="WaWorkerHost.exe" />
<CrashDumpConfiguration processName="DiagnosticsAgent.exe" />
<CrashDumpConfiguration processName="w3wp.exe" />
</CrashDumps>
<Logs scheduledTransferPeriod="PT3M" scheduledTransferLogLevelFilter="Verbose" />
</DiagnosticMonitorConfiguration>
</WadCfg>
<StorageAccount>********</StorageAccount>
</PublicConfig>
<PrivateConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<StorageAccount name="*******" key="******" endpoint="" />
</PrivateConfig>
<IsEnabled>true</IsEnabled>
Note: Iam using Azure SDk2.5
Please kindly guide me to proceed further.

Alert me | Edit | Delete | Change type
Question
You cannot vote on your own post
0
I am trying to log the information whenever user perform some operations in a WebRole in cloud environment. In emulator it will write the info in output window, but in azue portal I cant see the info anywhere. I have enabled the azure diagnostics and provided
the azure storage credentials, but the azure WADLogs table not getting created. This how I write the log "Trace.TraceInformation("Policy started");". Also used TraceSource to write the info to the log,but no luck.
my diagnostics.wadcfgx file contents below
<WadCfg>
      <DiagnosticMonitorConfiguration overallQuotaInMB="4096">
        <DiagnosticInfrastructureLogs scheduledTransferLogLevelFilter="Verbose" />
        <Directories scheduledTransferPeriod="PT1M">
          <IISLogs containerName="wad-iis-logfiles" />
          <FailedRequestLogs containerName="wad-failedrequestlogs" />
        </Directories>
        <PerformanceCounters scheduledTransferPeriod="PT1M">
          <PerformanceCounterConfiguration counterSpecifier="\Memory\Available MBytes" sampleRate="PT3M" />
          <PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\ISAPI Extension Requests/sec" sampleRate="PT3M" />
          <PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\Bytes Total/Sec" sampleRate="PT3M" />
          <PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Requests/Sec" sampleRate="PT3M" />
          <PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Errors Total/Sec" sampleRate="PT3M" />
          <PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Queued" sampleRate="PT3M" />
          <PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Rejected" sampleRate="PT3M" />
          <PerformanceCounterConfiguration counterSpecifier="\Processor(_Total)\% Processor Time" sampleRate="PT3M" />
        </PerformanceCounters>
        <WindowsEventLog scheduledTransferPeriod="PT1M">
          <DataSource name="Application!*" />
        </WindowsEventLog>
        <CrashDumps dumpType="Full">
          <CrashDumpConfiguration processName="WaAppAgent.exe" />
          <CrashDumpConfiguration processName="WaIISHost.exe" />
          <CrashDumpConfiguration processName="WindowsAzureGuestAgent.exe" />
          <CrashDumpConfiguration processName="WaWorkerHost.exe" />
          <CrashDumpConfiguration processName="DiagnosticsAgent.exe" />
          <CrashDumpConfiguration processName="w3wp.exe" />
        </CrashDumps>
        <Logs scheduledTransferPeriod="PT3M" scheduledTransferLogLevelFilter="Verbose" />
      </DiagnosticMonitorConfiguration>
    </WadCfg>
    <StorageAccount>********</StorageAccount>
</PublicConfig>
<PrivateConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
    <StorageAccount name="*******" key="******" endpoint="" />
</PrivateConfig>
<IsEnabled>true</IsEnabled>
Note: Iam using Azure SDk2.5
Please kindly guide me to proceed further.

Yosemite - says "not enough application memory - and closes all open applications

Since the day I installed Yosemite I have had problems. First, some other file was downloaded when I did the Yosemite install which crashed the computer. It had to go in for repair. Once that was remedied, I frequently get an error message "Not enough
application Memory and it starts automatically shutting down all of my programs. Normally, first to go is Mail, then Google (Safari would not work with Maverick - it would freeze) then Photoshop and whatever else is open. I did not have this problem with Maverick. This is a pain!
I am working on a 2009 Mac Pro with 24 MB Ram.
Any ideas about what is going on and how to remedy it. I would appreciate it. Thanks

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

S10-2: Wrong Clockspeed. ACPI Table Error [solved]

Hi everybody.
I am proud owner of an S10-2 with an Atom N280 CPU that runs at 1.66 GHz in WinXP. However under Linux (Kubuntu 9.04 and 9.10, as well as other distributions) the maximum CPU clock is 1.33 GHz. The following is the output of cpufreq-info:
cpufrequtils 005: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which need to switch frequency at the same time: 0
hardware limits: 800 MHz - 1.33 GHz
available frequency steps: 1.33 GHz, 1.07 GHz, 800 MHzm
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 800 MHz and 1.33 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 1.33 GHz:0.00%, 1.07 GHz:0.00%, 800 MHz:0.00% (16821)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which need to switch frequency at the same time: 1
hardware limits: 800 MHz - 1.33 GHz
available frequency steps: 1.33 GHz, 1.07 GHz, 800 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 800 MHz and 1.33 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.33 GHz.
cpufreq stats: 1.33 GHz:0.00%, 1.07 GHz:0.00%, 800 MHz:0.00%
When I boot the machine with the kernel parameter acpi=off the CPU runs at 1.66 GHz. But this is not a solution as a mobile computer without ACPI is completely useless.
Obviously the problem is an error in the BIOS' ACPI table that misleads the kernel to think the maximum speed was 1.33 GHz.
There is also an Ubuntu-bug describing the problem in more detail:
https://bugs.launchpad.net/ubuntu/+source/cpufreqd/+bug/422858
Has anyone else observed similar behavior?
I would be very interested in any kind of workaround or information about how to contact Lenovo and ask for a corrected BIOS.
Best
Solved!
Go to Solution.

Same here in Fedora 11:
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
1333000
S10-2, model 20027, bios 1ACN21WW(V1.12).
I'm also experiencing another problem which is probably related to errors in the BIOS
http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/s10-2-no-NX-bit/td-p/174434
The posters in the Ubuntu bug you refer to seem to have it as well.
Mind checking if you have it too?

Camcorder video error: "Unable to record. Resolution not supported by memory card."

We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem? I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

I am trying to install a program on my Mac Book Pro Retina from a Apple SuperDrive. Every time I run the installer, it says I do not have enough memory to install. However, I definitely have enough memory (186.74 GB). Any ideas why?

I am trying to install a program on my Mac Book Pro Retina from a Apple SuperDrive. Every time I run the installer, it says I do not have enough memory to install. However, I definitely have enough memory (186.74 GB). The program takes only 550 MB. Any ideas why?

Thanks for the clarification on the terms. I consider myself proficent at my computer, but not exactly in its inner-workings! I have 8 GB of memory installed.
I am still confused as to why I do not have any space for the program. This is the exact error message I get: "There is not enough free space on Macintosh HD disk. The Print Shop 2 application requires about 550 MB to be installed. Free some disk space and try again."
Thank you again for your help.

"ACPI Tables not in Reclaim Memory"

Similar Messages

Maybe you are looking for