ACR 4.4.1 does not open TIF file from bridge (CS3)

Hi,
I have the preferences in CS3-Bridge and ACR set to open JPG & TIF files in ACR and not CS3 but when I click on a TIF file in bridge it opens in PS CS3 instead. These TIF files were generated by a GUI interface for ENFUSE which is an algorythm that combines bracketed RAW or JPG exposures for expanded dynamic range... it works very well ad outputs to TIF... but I can't seem to open these TIFs in ACR. Isn't a TIF a TIF?
Is there a way to force ACR to open these?

There are many varieties of TIF files (including b/w fax images).
I have no idea if this will work, but you could try opening one of the files in Photoshop, saving as a TIF from Photoshop, and then see if that new TIF file will open in ACR. At least it should let you know of opening of TIF/JPG files in Camera Raw is working correctly.

Similar Messages

Can't Open jpeg files from Bridge CS3 to PhotoShop CS3

This is really weird. I had a trial version of CS3 and bridge worked fine. That ran out, so I tried CS2 to see if I could get by with the older version. CS2's bridge worked just fine.
Then I installed a full version copy of CS3 and removed CS2 (to free up space) and for some bizarre reason, I cannot open any files from bridge into Photoshop. It's the CS3 bridge because I clicked on the Help, About Bridge and it showed CS3.
When I just click "open" under file, it tries to open with Illustrator. When I click, "open with" I get this list: Adobe Illustrator CS3 (default), Firefox 2.0, Internet Explorer 6.00, and Paint 5.1.
I can't figure out a way to change the default to CS3, and it worked fine with the trials.
Please advise.

It was a nice thought. I just did it, and associated all .jpg type files with photoshop, but no such luck in solving issue. I did figure out a way around it that kinda works, but not nearly as convenient. I drag select a group, then hold-click on the group and toggle into Photoshop, then let go. It pastes the group there. However, if I control click to select a group (or deselect within a group), I can't hold-click. So I have to do smaller groups at a time if I want to bypass certain pictures that get grabbed in a bigger group--does that make any sense at all?

Aperture does not recognise TIF files from Nikon CoolScan

The TIF files from my Coolscan are good in every other application, but Aperture does not recognise them. I've tried re-saving the TIFs as JPG and PDS but Aperture doesn't recognise any file generated from the TIF. Maybe it's something to do with the scanner driver? Any ideas how to load these files into Aperture?

You might check the color space that is assigned to the files. If you are using Nikon Scan software to manage your CoolScan, there is a preference for setting the color space of the saved file. FWIW, Nikon CoolScan .nef files are a 'raw' file, not camera raw, that was/is a Nikon proprietary format for their scans. If you use the Nikon Scan for image editing, the edits are non-destructive in saved files and can be adjusted by re-opening the file in NS. Adobe first made editing camera raw available in early 2003 and the Nikon format preceded that. Nikon's camera raw format also has the .nef extension, but is not the same as the CoolScan .nef-- really confusing. I suggested checking the color space, because Nikon has different internal names for Adobe RGB(1988) as well as their own Wide Gamut space.
All said, I've not had a problem opening .tif scan files in Aperture.

IPRINT 3.0 does not open PDF files from mail apps

I have just installed iPRINT. It finds the printer with no problem (C6180) and I can also load files from the computer to the iPAD on which it is installed. The problem comes when trying to open PDFs from the mail program. There is an option to select open with iPRINT, I do so, and the program opens but the document does not appear. Only the home page of iPRINT. It worked once or twice when I first installed it, but only after screwing around with it.
Can anyone help? It is on an iPAD 1 with iOS 4.3
Thanks.

Uninstall NWBC , go to REGEDIT --> Navigate to HKEY_LOCAL_MACHINE --> Expand SOFTWARE node --> Locate SAP -- Delete the Folder NWBC.
And
2). Expand HKEY_LOCAL_USER --> SOFTWARE -> SAP --> NWBC - Delete.
Restart the system and try to install NWBC again and check.
Thanks,
Arjun

Aperture 3.4.5 does not open raw files from Nikon P7800

Apple's list of supported cameras includes the P7800, but I get unsupported image format when I try and import nrw (raw) files. What gives?

Check your installed DCR version in the "About Aperture" panel and use Software update to see if a later version is available.
But I think you may be out of luck.
You indicate you are using OS X Lion, for which the last RAW update looks like 4.0.9 - http://support.apple.com/kb/ht4757
Support for the P7800 was introduced in RAW update 5.0.1 - http://support.apple.com/kb/ht5371 - which looks to be for Mountain Lion up.
Andy

Premiere Pro CC does not open MOD files correctly

Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
Cheers

Premiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads.

QT does not open AVI file

hello,
I have installed Perian but with Mountain Lion QT does not open AVI file (no audio and no video)
do you have any suggestion?

I am using QT pre-installed in Mountain (should be X)
QT X can only play files using codecs it is programmed to expect to be used in the loaded file container/with the loaded file's stated extension. For example, QT X will not play a "muxed" MPEG-2/AC3 file with an MOV or VOB file extension but will usually play the file if the extension is changed to TS, MPG, or MPEG. On the other hand, the QT 7 Player tends to look at the internal header information and select a codec based on what the file says it needs for the actual playback. Thus, the QT 7 Player may frequently play files that the QT X Player does not play.
Besides supporting the the AVI file container, your QT system must also be configured to support the actual audio and video codecs contained in the AVI file and not have a "conflict" problem. For instance, Motion JPEG support for QT was dropped with the release of Lion. AVI files containing MJPEG video thay plays correctly under Snow Leopard will no longer play under Lion or Mountain Lion with additional support. In this case, Perian still provides such support. It also still provides support for DIVX, XVID, 3IVX, and similar third-party codecs commonly found in AVI containers. However, Perian support for such files can become conflicted if you have also installed the actual third-party codecs along with Perian and the different codecs fight over which is to be used for playback. This is why it is important to know the actual codecs used to create files using generic file containers like AVI and MOV and the codec components actually installed on your system, as well as, their potential for creating conflicts.
As to the actual playback of files, there are basically only three options (as indicated by the URL provided above:
1) You can conform the file and/or your system codec component configuration to play your files using a QT player app if possible,
2) You can use an alternative media player app the contains "native" support for the file containera and/or codecs used to create the files, or
3) You can convert the file to a compression format and file container that that is already natively supported by QT-based applications.
Since do not seem to know or are unwilling to identify the specific codecs causing a problem here, the only workflows left to you would be to try playing the file in an alternative media player which contains its own built-in codec support (e.g., VLC) or convert the files to something your current QT system configuration can handle (e.g., use a converter with built-in codec support like HandBrake).

PS CC does not open psdx-files

Hallo, PS CC does not open psdx-files, although I installed the Touchapp-Plugin. In PS CS6 there were no problems.

Did you install the optional plugin in Photoshop CC?
It won't be automatically copied from CS6.

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC

Apercu does not open pdf files

apercu does not open pdf files and crashes

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Illustrator 6 does not open ai-files

Hello,
coming back to work monday morning Illustrator suddenly does not open ai-files (I worked with friday), which is a problem for me to say the least.
All software is updated, I think I made an update friday actually.
I get a dialogue box simply saying "An unknown error ocurred"
Help?
I use an iMac with OSX 10.8.3 and files are stored on a server, don't know the type. (Would not open files from desktop either.)
Eivind

Ookaaay, after a couple of restarts it works again.
Weird.
E.

Can not open RAW-Files from Nikon D4 in Photoshop cc

hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?

ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list. Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not.

My program does not read raw files from mark III

My program does not read raw files from mark III

emac77,
Support for Canon 5D MIII RAW files was announced in ACR 7.1 (Adobe Camera Raw 7.1).
The current stable release is ACR 7.2 while ACR 7.3 is still a Release Candidate (Beta).
Starting ACR 7.2, Adobe stopped supplying a manual download link which was available till 7.1. Adobe Application Manager (AAM) is the only way for you to update to ACR 7.2.
However, here is a direct download link that AAM connects to for the download that you can use to grab the .zip or .dmg (Mac) file. Download and install. See if you're able to open your files then.
ACR 7.2 for Windows: http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
ACR 7.2 for Mac: http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.2.82/Setup.dmg
-ST

In CS 5 I am able to open all files from Bridge but is PS CC I can only open .tif files

In CS 5 I am able to open all files from Bridge but in PS CC I can only open .tif files, all other files I get file not found. What is wrong?

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge
http://forums.adobe.com/community/photoshop

I can not open NEF files from Nikon Df

I can not open NEF files from Nikon Df
Buongiorno a tutti,
qualcuno mi può essere di aiuto per utilizzare Camera RAW con i file NEF della nuova Nikon Df ?
Grazie infinite .
Hello everyone,
someone can help me to use Camera RAW NEF files with the new Nikon Df?
Thank you very much.

This thread has instructions for importing Nikon Df raw files in Lr5.3RC (by making them look like Nikon D4 raw files):
http://forums.adobe.com/message/5920044#5920044

ACR 4.4.1 does not open TIF file from bridge (CS3)

Similar Messages

Maybe you are looking for