ACR 4.4 Profiles, how to set them as standard

Hello All,
With Lr 1.4.1, and the new ACR camera profiles, how do I make LR use them on all the new images that I am importing. Since updating .4.1 every image that I import uses the older profile (4.2?) Any how, I had read that after you update to .4.1 that every image imported after that would automatically use the new profile....
How do I make this happen?
I understand that it will not be automatic on images pre-existing in LR prior to .4.1...
Thanks

By default if an image has _NOT_ had settings applied, the new 4.4 profile WILL be used for new settings. But I'm pretty sure any image already in Lightroom will need to have the 4.4 profile newly set. An easy way to do this for existing images is to do a new Develop Preset changing _ONLY_ the Calibrate section (after selecting the 4.4 profile in an image in Develop).
Then you can select all in the Library and apply the 4.4 preset to all raw images (it's not applicable for non-raw files).
Then, to make sure the 4.4 profile is used for all new imports from your camera, you should take an image from each of your cameras, select Develop and without altering the rest of the parameters (you want to start FROM the current default) change the Calibrate drop down to the 4.4 profile and then save that as the new default for your camera/cameras...

Similar Messages

How to set tabs and how to set them outside the margins of my main body of text

I type lots of docs where I have a body of text, indented, and then there is an action letter, A,B,C etc, out to the right. Can't see how to set the body of text plus separate tab outside the margin in Pages. Could do it in MS Word. Pages looks great, but I'm stuck on a few things I used to do. Can anyone help?
Thanks

Hi Peter
Thanks for the reply.
Here is a sample of the text:
you'll see that the D, C, B etc are squashed up to the text, I can't move their tab outside the margin. On Word (dare I say it?) I could set my right hand margin and still have a tab further out. Don't know that your anchoring idea is the thing. Is there another way to limit my text? I wonder about columns, although then all the ABCs will be in the second won't they?
Any ideas?
Thanks again
Nonie

X6 contact rss feeds, how to set them up?

Hi hope someone can help.
Iv just got my nokia x6 16gig, and cant figure out how to set up the facebook rss feed for the contacts on the home screen contact bar.
Hope some one can point me in the right direction.
Tom

i managed to get it working, ended up connecting to the internet all the time, and not disconnecting afterwards but... here's how i did it
i firstly subscribed to my own & friends rss feed on facebook through firefox, it automatically puts the feed links in the bookmarks toolbar.
secondly, in ovi suite, i enabled the bookmarks and webfeeds, and then, updated by going into sync and then choose bookmarks and webfeeds.
it created a new folder in my firefox bookmarks > copied the rss feeds into that folder, and re-synced again..
then added the new feeds to my own and my friends contact card thing on the home screen... by going into the contact card, rss feeds>accept> select the relivant feed...
IT WORKS!
hope this helps, took me ages to do it, but, it works like a charm....

Smartforms Triggered as Email (PDF) Via Action Profile, How To Set sender Details??

Hi all,
Me sending service Quotation to customer as email by using action profile. problem facing here is, while sending email, sender name is going sy-uname so i was trying to set some default name in From address of mail body. Actually standard class and method which i used for this process is "CL_DOC_PROCESSING_CRM_ORDER=>CRM_SRVORDER_EXEC_SMART_FORM" . In this method signature is_mail_sender is empty while processing and this parameter is used as importing parameter while calling FM "Function_Name" . Can any one give me some idea how to do this customization.
call function function_name
          exporting
               archive_index        = is_archive_index
               archive_index_tab    = ct_archive_index_tab
               archive_parameters   = is_archive_parameters
               control_parameters   = control_parameters
               mail_appl_obj        = is_mail_appl_obj
               mail_recipient       = is_mail_recipient
               mail_sender          = is_mail_sender
Thanks all,
Anbu

Hi Anbu,
I believe note 573736 content will help you
Kind regards,
Garcia

HTML DB Color Error message in a field - how to set them

Hi everyone,
I want to know where I can set the color of an error message in a field ?
In our page model, on an required field: the message is black
and on an optional field: the message is red.
I want both of them red.
Thank you. Bye.

Hi Carl,
I have a similar issue. I am using Theme 20 and error messages per item as well as page level error messages are coming up in Blak. Is there a way to show them in Red?
Thanks,
Bhavesh

How to set acknowledgement flag in asynchronous message

Hello,
I just read in the documenation that it is possible to request acknowlegment messages by setting an "acknowledgement tag" in the request message.
My question now is how to set this acknowledgement tag and which rules I have to follow? Do you have any more information on this topic? I see the flags in "ReliableMessaging" but not sure how to set them.
Thank you.
Edited by: Florian Guppenberger on Dec 2, 2009 5:16 PM

Hi,
For idoc check this links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
I don't think it is possible for Proxy.
Regards
Ramesh

Environment Variables: How to set

I deploy my application to Tomcat. My application uses environment variables that are set in the server.xml file as follows:
<?xml version="1.0" encoding="UTF-8"?>
<Server>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/>
<Environment
name="simpleValue"
type="java.lang.Integer"
value="30"/>
Note: in JBoss it would a little different:
<env-entry>
<description>The maximum number of tax exemptions allowed </description>
<env-entry-name>simpleValue</env-entry-name>
<env-entry-type>java.lang.Integer</env-entry-type>
<env-entry-value>30</env-entry-value>
</env-entry>
The application works fine when deployed to Tomcat. However, I can not find where in JSC or the embedded Sun server to set these environment variables? Anyone know? Thanks in advance.
Kelly

Sorry, that document talks about deploying to JBoss. That was not my question. My question was:
I can not find where in JSC or the embedded Sun server to set environment variables? Anyone know? Thanks in advance.
Well, I found a partial answer. You can add environment variables to the Web.xml as follows:
<env-entry>
<env-entry-name>UploadDirectory</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>\logs\tqs6</env-entry-value>
</env-entry>
That puts them at the application level. I am looking for how to set them at the server level for Suns Java Application Server that is bundled in JSC.

I have purchased 100 iPads for my school. We need to set them up for classrooms. I am not sure of the protocol. flrobinson

I have purchaed 100 iPads for my students. I need to know how to set them all up for muitiple users with apps.

Hi fkr2.0,
Welcome to the world of iPad deployments! There are a few things I recommend you do before you get started:
First I would watch the iOS Deployment Model Videos on the left side of this page:
http://www.apple.com/education/resources/information-technology.html
Then I recommend you read through these two guides:
iOS 6 Education Deployment Guide
http://images.apple.com/education/docs/ios_6_education_deployment_guide.pdf
Apple Configurator Help Guide
http://help.apple.com/configurator/mac/1.0/
This will give you a solid foundation for managing iPads with Apple Configurator. Once you read through these guides you will likely have more specific questions that you can post to these forums.
Hope this answers your question!! Good luck with your iPad deployment.
~Joe

How do I create an ACR custom lens profile if camera exposure can't be set to manual?

How do I create an ACR custom lens profile if camera exposure can't be set to manual?
I ask this question for the Nokia 808 PureView 41MP camera. It produces stunning image quality but exposure can only be controlled via EV +/- compensation. I need a lens profile to correct for vignetting to get even skies in panorama (which turn out stunningly otherwise). There is no profile for the Nokia 808 PureView I am aware of and I'd like to produce one.
Is the Adobe profile creator able to correct for varying exposure using EXIF or overlapping parts of the chart or background?
Or would the Adobe profile creator ignore EXIF if I use studio flash to enforce a constant lightning situation, even if shutter speed would vary (aperture is constant and ISO can be set constant, just not the shutter speed)?
Or did Adobe produce a profile internally they can share?
Thanks.

If you read the first post, this is the camera-app of a 41MP Nokia Pureview 808 camera-phone, so maybe someone could write a new camera app but the phone is Symbian OS which is dead, making that unlikely.
http://www.digitaltrends.com/mobile/the-skeptics-guide-to-nokias-808-pureview-five-reasons -41-megapixels-are-not-a-gimmick/
http://www.digitaltrends.com/mobile/the-nokia-lumia-820-and-lumia-920-too-little-too-late/
It would probably be easier for Adobe to rewrite the LPC to allow vignetting to be computed from a single shot of a blank wall without a target in the shot, than to have someone rewrite a camera app that allows manual exposure.
Another idea about how to get the phone to keep a constant exposure would be to experiment with putting darker and lighter objects in the field-of-view away from the target area to make the camera metering adjust things so it’s exposure is the same from one shot to the next. This would take some doing but should work, unless the LPC uses the part of the frame that doesn’t contain the checkboard target in its computations.
You’re basically varying the scene around the target so the camera takes the same exposure of the target each time.

How to set "embed icc Profile" option to export document as JPEG

Hi All,
While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.
How to set it if I am exporting the document through my program in which I rasterize the document and used
the sAIImage->AsJPEG(raster, jpegDataFilter, params);
I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.
plz anyone suggest me how to do so.
Thanks,
Rud.

thanks for you through out help.
I use the folowing code which executing properly,but there is no effect on JPEG whether the value of jpegparam.s.jpeg.embedICCProfile is 0 or 1.
/////Start
ASOptimizationSettings jpegparam;
jpegparam.fileFormat = asffJPEG;
jpegparam.s.jpeg.embedICCProfile = isICCProfileEmbeded;
ASInt32 optID;
optID = sAIOptSet->GetUniqueOptimizationSettingsID();
error = sAIOptSet->SetOptimizationSettings(optID, &jpegparam); // after executing this line error = 0
/////End
I guess it would work when we export document as jpeg through AIActionManagerSuite
not with rasterizing the layer's art and then exporting them as JPEG using AsJPEG().
thanks

How to set the ICC profile in LR to be the same as PS?

Hi Adobe,
Why do my images look much darker and contrasty in LR(4.3) then they do on PS(CS6) where they have far more tonal range? I'm looking at them side by side on the same screen. I know it has to do with ICC profiles but I can't find how you set that in LR. Any help would be appreciated. An example can be viewed here: http://mikedodd.co.uk/other/temp/Screen%20shot%202013-01-22%20at%2023.06.52.jpg You can see how much better the top (PS) image is.
Thanks
Mike

I'm not familiar with that model, but don't all Coloredges come with Color navigator software and sensor? No need to use third-party calibrators, the results are guaranteed to be much better using the Eizo calibrator. I use Eizo easypix on a pair of Flexscans, and the results are vastly better than using Spyder 3 and ColorEyes Display Pro (which I also have).
In any case the Spyder 2 is not a good sensor. It quickly got a bad reputation and rightly so (I have one sitting in the back of a drawer). Things improved tremendously with the Spyder 3, and now the 4 is out.
The general consensus, however, is that the best "mainstream" third-party calibrator currently on the market is the x-rite i1 Display Pro. If this is what you need to use, maybe it's time to retire the Spyder 2?
Most real-world images contain parts that are out of gamut for sRGB, you'll quickly get used to that. But it can still look good. With a little work, it's possible to make almost anything look good inside sRGB. Consider that almost all monitors have a native color space very close to sRGB. Only the so-called wide gamut monitors (I'm not sure if yours is one) exceed that. But with a standard monitor, what you see is already sRGB.
Relative intent "hard-clips" everything outside the target space gamut, but OTOH preserves everything in-gamut unchanged. Perceptual compresses near the gamut border, sometimes resulting in slight color and tonal changes. The difference isn't dramatic, I never bother with intent, but leave it on relative and deal with clipping when necessary (that is, if you lose desired texture and detail).

How to set default camera profile?

Hi,
I'm using LR 2.2, and have the camera profiles (love 'em :)
I'd like to arrange that one of these become the default for new imports. How should I do that?
TIA
Simon

There are two ways. One is to take an image taken with the camera you are using. Then you hit reset and the only thing you do is to change the profile to the setting you'd like. Then you hold alt/option and the reset button will change into "set default.." just hit that and now all new imports from that camera will use the profile as default. Secondly, what you can do is generate presets that apply only the profile and simply apply them during import.

How to set up roaming profile on Macs using AD like in windows

I can bind the workstations to the domain fine.. But can someone direct me to instructions of how to set up the roaming profiles ?
What steps do I need on the server ? This is what I've done so far.
I already have OU's for the departments and the users have a shared folder inside their department folder.... \\server\shared_folder\user
I have done the usual things with AD as far as the profile settings on the windows server.
Am currently running Mac OS 10.5 and above
My windows AD runs on windows server 2008
All my windows workstation are able to use roaming profile without a problem.
So far i have tried the so many avenues including..
Make sure the Mac systems are joined to the domain controller and an ADS user can log on successfully. Use "Directory Utility" under "Utilities" menu to join the system to the domain.
Backup all the contents from /Users to the storage or somewhere locally.
Configure automount - Go to "Utilities" -> "Directory Utility" - Select the domain and click "Show advanced options" - Click "Mounts" tab and add automount as mentioned below. Remote NFS URL: nfs://server_name/share_name/path/to/profile/directory Mount location: /Users Additional mount parameters: -P,-T Apply the settings and this will mount the remote shared folder or we can name it as Roaming Profile Space - under /Users directory
Enable roaming profile - Go to "Utilities" -> "Directory Utility" - Select the domain and click "Show advanced options" - Click "Services" -> Select "Active Directory" and click "Show advanced option" - Click "User experience" tab and select the option "Create mobile account at login".
Reboot the system and log in as any ADS user. The Roaming shared folder will be mounted and the user profile will be created on the shared folder
Can anyone kindly assist me

Hi Guys, anyone with the Soln...or Tips..Am waiting

I have an iPad with IMAP email accounts set up but I can find no "inbox, drafts, trash" folders anywhere, either on my ipad or desktop Mac. How can I set them up? They do not show on my MacMail preferences either and I can find no way to add them.

I have an iPad with IMAP email accounts set up but can find no "inbox, drafts, trash" folders for each email account anywhere on my iPad or in Mac Mail. How can I set them up? I can't find anyway to set them up anywhere. Thanks

Hello blu monkey,
I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
iOS: If IMAP Mail folders are not visible
http://support.apple.com/kb/HT1393
On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below. When this is showing, you should see your email account listed near the bottom with a triangle next to it. When the triangle is pointing down, it should show your folders:
Mail (Mountain Lion): Show or hide the sidebar
http://support.apple.com/kb/PH11763
Thank you for using Apple Support Communities.
Best,
Sheila M.

I need help. My three boys have brand new iPad mini's and I would like to set them up. I would like to create one new apple ID and have it shared by all three. This way they can share content (apps, music). How do I do that?

Looking for an information management solution. I have three boys that have brand new ipad mini's. I would like to set them up to manage information the easiest way.
My first thought was to use my apple ID for their apps and purchases. This would give me the advantage of seeing everything downloaded and be able to monitor this closely. The disadvantage to me, was that they would see all of my contracts, my apps, and my music.
My other thought was to create one new apple ID and to share that among the three boys. This way I would not have to worry about my information being on their ipads.
This is a very confusing situation for me. My goal is seperate my stuff from my kids stuff. Appreicate input from anyone who has in-depth experience with this as it applies to apple ID, icloud ID, and any detailed explaination of how to do this would be appreiciated. Thanks.

I think I will do this. I will use my apple ID and set face time and message to work independently. That solves one problrem. My other problem and maybe my bigger problem is that if I am using my apple ID, how do I iflter all of this so that my kids don't see my contacts, get my apps, etc. ?

ACR 4.4 Profiles, how to set them as standard

Similar Messages

Maybe you are looking for