ACR 6.1 for PSE 8 for Mac

I use PSE 8 for the Mac to edit RAW photos from my Canon 40D. I just bought a Canon T2i and PSE/ACR does not recognize the RAW file type from the new camera. When I tried to install ACR 6.1 to see whether that would solve my problem, I got a message that I need to install a new copy of Adobe Application Manager. Unfortunately the link that is provided in the pop-up message box is broken (I informed Adobe about that).
Two questions: Will installing ACR 6.1 solve my problem in reading the T2i RAW files? If so, is there a workaround on the Adobe Application Manager problem?
TIA

Barbara,
Thanks for the quick response and helpful link. I downloaded ACR
5.7 and followed the installation instructions. When I opened
Bridge, only generic thumbnails were shown with the EXIF data blank
(the photos open in PSE). I followed the instructions to purge the
central cache, but that didn't help. Any suggestions?
Dick
>You can't install ACR in PSE that way. Go here:
>
>http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
>
>and download and manually install the update in PSE. You won't be
>able to update bridge past ACR 5.7.
>

Similar Messages

Help for using camera raw in PSE 8/Bridge for Mac for the Canon 7D

Recently purchasing the Canon 7D, taking a few test photos in Raw, then trying to use Camera Raw in PSE8/Bridge for Mac is a problem. I cannot figure it out. Can anyone help this frustrated, novice computer user?

You need to update the camera raw plug-in for bridge and PSE 8 separately (they use two different copies). In Bridge, just go to Help>Updates which will install, I think, ACR 5.7, which works with your camera. (You can't update bridge beyond that version).
For PSE 8, go here, download the latest version and follow the instructions in the readme file.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Note that the directions may tell you that you can overwrite the old plug-in. That isn't true--you must remove it before putting the new one in there.

OpenGL in PSE 8.0 for Mac?

I can't seem to figure out how to enable OpenGL acceleration in Elements for Mac. When I look under "System Info" it says disabled and I would like to enable it. Any ideas?

You need to update the camera raw plug-in for bridge and PSE 8 separately (they use two different copies). In Bridge, just go to Help>Updates which will install, I think, ACR 5.7, which works with your camera. (You can't update bridge beyond that version).
For PSE 8, go here, download the latest version and follow the instructions in the readme file.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Note that the directions may tell you that you can overwrite the old plug-in. That isn't true--you must remove it before putting the new one in there.

Raw images do not show up in Bridge CS4 for PSE 8 for Mac

I just downloaded PSE 8 for Mac and my raw files no longer show as thumbnails. I can open them in Elements, but the image is blank in Bridge. These same images were fine in CS3 (PSE 6 for Mac). I have downloaded and installed the new Camera Raw 5.6 plug-in but that didn't work. Any suggestions? Thank you!

You have to update bridge separately from PSE, and bridge ships with a pretty old version of ACR. Just go to Help>Updates in bridge and it will update itself for you.

Opening animated gif in PSE 8 for Mac

I am switching from PSE for PC to PSE 8 for Mac.
I have always been able to open animated gif as layers and work with them, then resave as an updated animated gif.
WIth PSE 8 for Mac, I get a pop up that the file is animated and can only see the top frame. Any ideas on how to open up all of the frames in layers?

Do I need to enable this process for my Mac? Maybe I'm missing a plug-in or update?
I have been opening these files from others, tweeking and resaving for almost 2 years in PSE. It definitely will not shuffle the individual panels on an animated gif into the layers box.
My tweeking usually involves adjusting frame speed. Is that what you mean by 'frame rate'?
Thank you for your help.

Photoshop elements 8 for Mac - how to move photos (events) from iphoto to pse

I have figured out how to move one photo over through opening a file. But I can't move a full event or album from iphoto. Ive tried going to bridge but when i click on the iphoto folder, it takes me into my iphoto and I'm not sure what do then, no buttons or anything that seems to connect to PSE. Any help would be appreciated! I wish Adobe supported this product better for Mac users. Maybe they read these discussions?

Hi,
Are you opening iPhoto files from within Photoshop Elements? You can open all the files in an iPhoto event into PSE8 through a single click.
In Photoshop Elements, go to File menu > Open. In the browser window that appears, click Photos under Media in the sidebar. Now, you should be able to see iPhoto with all its events. When you click on an event and "Open" it, you should get all the photos of that event in the project bin.
Is this the problem being asked?
Thanks.

PSE 12 for Mac doesn't see my scanner

PSE12 for Mac refused to work with my scanner. In preferences I checked "Additional Plug-Ins Folder" and selected the Optional Plug-Ins Folder which contains the TWAIN.plugin. I restarted the PSE and the File> Import... command remains dimmed out. Tried resstarting the iMac and PSE still doesn't see the scanner. PSE 11 used to recognize the scanner right away. I hope this isn't a permanent change in PSE 12!
Thanks for any help!
OS X 10.8.5
Canon 8800F Scanner
TWAIN.plugin v12.0.4x001

Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
Thanks again for your assistance! William

Bridge in pse 8 / pse 9 for Mac

Hi. I use pse 8 for Mac and is fund of Bridge. Can anyone tell me if pse 9 includes Bridge in (pretty much) the same version.
Or to put it another way: Would I benefit of an upgrade?

Yes, there's no bridge in PSE 9, but you can keep on using Bridge CS4 if you don't want to use organizer. The only problem is that you can't update the raw converter in Bridge anymore, so you won't see thumbnails for newer camera models:
http://barbarabrundage.com/2011/01/13/using-bridge-with-photoshop-elements-9/

Printing with PSE 8 for Mac

Hi,
hope some of you may give me some help.
Have tried to print with PSE 8 for Mac, but in the printing options there is none where i can choose the type of paper (ie: glossy, premium glossy....).
My printer is an Epson Stylus Photo 1400.
It works fine with iPhoto, here i can choose paper type. And prints come out fine.
Thanks for any advice,
dangerly

My printer is a Canon so not entirely sure if this helps but when I print from PSE 8 I do not get to choose the media type until I have clicked on the print button in the PSE dialog box. I am then presented with the dialog box for my printer where I can set the media type amongs other attributes.
It is normal for the media type to be the job of the printer driver so perhaps it is the same for your printer.
Jim Graham

PSE 8 for Mac - Error Message

I just installed PSE8 for Mac running OSX 10.5.8. When I click on PSE I get an error message "There was an error opening this document. The file is damaged and could not be repaired". I'm not trying to open any documents, just the program. When I create a new file I continue to get the message. I can open pictures and edit them, but this message keeps on appearing every time I want to create a new document. Any suggestions?

Did you install from an administrative account? Did you disable any antivirus software (if you use it) before installing?

Pse 8 for mac and iphoto 09

I read on the elements 8 for mac page that it works easily with iphoto. My question is how?
I can find nothing in the elements documentation about working with iphoto and when I try to access the iphoto library via file>open and select iphoto library and click open I get a message telling me my request could not be completed because of a program error. I am using iphoto 09. I am new to both elements and mac. Can anybody help? Just how does elements work with iphoto?
Thanks.

Thank you so much Barbara for those two helpful sentences !
You cannot believe the amount of time I have spent today trawling forums and knowedge bases trying to solve various problems with PSE8 (Mac). It took me over an hour just to get past a couple of install gremlins !
On the front of the PSE8 (Mac) box it clearly says "Works with iPhoto" which is why I simply cannot believe why Adobe have not put a similar couple of clear bolded sentences in the minimalist "Getting Started" pamphlet. Or better still bring up a dialogue box when you start the application to offer to auto config the link to iPhoto.
Another thing that has added to my frustrations is that the intro video tutorial, starts of talking about using Organise in PSE7 for Windows?
After spending so much time developing this Mac version of PSE, it feels like the basic top 10 things to get new users started have been overlooked in the rush to get the product to market. Such a shame.
Anyway I am sure that the PSE8 (Mac) will prove to be an indispensible product, but must confess it has been unbelievably frustrating today.
However I suppose the silver lining is that I have now found this forum, so will no doubt be coming here often over the coming months !
Thanks again,
Andy

PSE 8 for Mac says "License expired"

Hello.
I am having a problem with PSE 8 for mac. The situation for my software is complicated but it my be germane. I download the trial version of the software and liked it. I put the software on my wishlist. My in-laws got a copy of the software for Christmas, but they bought the windows version from Costco. Because Costco does not sell Mac software, I called up Adobe support and asked if they would cross grade me. I did not want to return the software at Costco and not be able to get it. So, I thought I would call Adobe and see what they could do -- cross grade could be a win/win. They said that they would if I sent the serial number. I did that, then they said that I need to pay $25 to cross grade, which I did not want to do. I asked them to just give me a permanent serial number. Adobe eventually did give me a permanent serial number for the PSE 8 trial and that is what I have been using.
At about the time of the 10.6.3 update, PSE stopped working giving an error message "Licensing for this product has expired". I tried a number solutions listed on the support site here at Adobe, but no have worked EXCEPT turning back the clock to 2008. Is there a way to get this to work without having the clock wrong?
Thanks.

This shouldnt have been the case. I am sorry that you are experiencing this issue.
Can you please try to do the following:
1. When your system date is in year 2008 and you are able to work successfully with PSE Editor, go to Help Menu inside Editor and click on the link saying Help->Deactivate...
2. Select the option to erase serial number and deactivate the product.
3. This will quit PSE Editor as well.
4. Launch PSE Editor again and now supply the serial number which Adobe gave to you again...
Hopefully, this error message wouldnt come now...Please keep me informed...
Regards,
Ankush

PSE 8 (for Mac) refuses to launch - with message

Just tried to launch PSE 8 (for Mac), it didn't launch, but produced the message: "Could not open scratch file because disk is not available."
(tried this four times with the same result each time)
Conclusion: because the most recent backup to RAID filled that disk, PSE 8 cannot access the scratch disk on the RAID backup disk.
(This, even though I removed over 80 GB of old video files from the archive.)
I purchased PSE 8 11/28/2009 - can I use an app removal utility to remove this installed version and re-download another installer? It seems the most direct approach but first I have to ensure I can download a "replacement" and find out the original serial number to activate that replacement.
The original directions from Adobe indicate that all I have to do is access my order history and the serial number will be on the order form. I'm not seeing any clearly identified serial number on that order.
So my question are;
1. Should I first remove the original PSE 8 - or just the plists?
2. how to find the original serial number?
I do know already: once I have PSE 8 replacement installation running, I must set a scratch disk location on another (roomier) drive. this is not a problem: I have two 1 TB drives installed in my Mac Pro in addition to the two 500 GB drives which make up the (old) RAID.
Mac Pro 1,1 (2.66 Ghz Quad Core Xeon), OS 10.5.8

Good call but it didn't work: tried deleting those plists twice. Still get "disk not available" message w/ immediate PSE quit.
Further: I ran Diskwarrior on my "home" drive, the cloned "home" drive AND the RAID backup.
This included Directory repair, File Check and Hardware Check on all three volumes.
Also repaired permissions on "home" drive and cloned drive.
I then repeated the attempt to launch PSE 8 on my "home" drive and the cloned "home" drive: same result. (failure)
Sidebar: While running Disk Utility to repair permissions, I happened to click on the "RAID" button and found that
one drive is listed as "Failed" and the other is listed as "Degraded."
Just in case that has anything to do with the PSE 8 failure to launch: I am now using Disk Utility to rebuild that RAID set. This takes 4 hours and will wipe it clean. I'll try in the morning once again to launch PSE 8 and get back with result.

I used to use PS "actions" are they in PSE 8 for Mac?

I have been using an old version of Photoshop for Mac. Under the Windows heading there was an Actions option where I could "record" some actions to edit photos and the"play" it to perfrom the same actions on different photos.
In PSE 8 for Mac I see that under Guided Edit there is an Action player with 4 presets, none of which suit my purposes. It says that I can add (from where I don't know) or create my own actions sets by referring to the Help menu. When I search the help menu for " Create Action set" I get 15 topics and none of them seem to be about creating actions sets.
I'd like to be able to record a set of acttions such as OPEN FILE- SIZE IMAGE-UNSHARP MASK-SAVE-CLOSE- and then play it back.
Help appreciated.
thanks,
Rob

When you save an action from photoshop 7, you should be able to
choose the place for saving (i.e. desktop).
The default place for saving actions is very often in the ps7 application folders.
Something like: Applications>Photoshop 7>Presets>Photoshop Actions.
As far as what actions from ps7 work in pse8, try to record steps in your
action that are available in pse8. Something like unsharp mask will work,
but not a command such as convert to cmyk. There are alot of commands
that are not on the pse8 menus that do work such as a layer mask or trim.
It would be good idea to test your actions in pse8, before installing a whole bunch and
finding that half of them don't work.
You could make test action for this purpose. In ps7, record an action
such as Image>Trim.
Name this action set Test (you can name the actual actions anything you want)
and put it in your pse8 photo creations>photo effects folder.
Then delete (move to your desktop) the MediaDatabase.db3 and start pse7
(this will take a while to rebuild the effects panel).
The Test action should be visable in the effects panel after selecting
photo effects and show all. It wiil just be a black thumbnail named Test.
From now on when you want to test an action, just replace the Test action
with another action named Test, but with the action steps your testing
and no need to delete any files (database).
By testing your actions in this way, you avoid the hassle of making a
xml file and a png thumbnail for an action that may not work.
When installing actions that have been tested, you also need a xml file
and a png thumbnail file in addition to the action. (look at xml and png
files already in the photo effects folder for examples).
You don't have worry about the jpeg files, as elements generates these itself.
It's a good idea to delete (move to desktop) the the MediaDatabase.db3
and the ThumbDatabase.db3 anytime you install actions other than the Test action.
After you start pse8 and everything works, you can delete those files from your desktop.
There is also an action player in pse8 under guided edit>automated actions.
As tempting as it may be to test actions with the actions player, i would avoid that.
One very good reason is that some of commands that are in pse8 don't work with
the actions player, for example, any of the transform commands.
In addition to texaschicksblog mentioned above, you may also want to read this pdf:
http://www.camner.net/files/actions_in_PSE_8_for_mac.pdf
Hope some of this helps.
MTSTUNER

How to print a picture package in PSE 13 for mac?

I can not print a contact sheet or a picture package in PSE 13 for mac. How do I enable this function?

I believe you need to be in the Expert mode in the pse 13 editor and then they are listed under the File menu.

Is ACR 7.1 available for Mac OS 10

I have ACR 6.4.1

"ACR" being what, exactly? If you mean Adobe Camera Raw, 6.7 seems to be the most recent version available for Mac unless a later version is bundled with CS6, though this is a question best directed to Adobe for confirmation.
Regards.

ACR 6.1 for PSE 8 for Mac

Similar Messages

Maybe you are looking for