ACR 8.4 CC RC install fails with AAM message 'patch not applicable'

ACR 8.4 CC RC install fails with AAM message 'patch not applicable' - Running Photoshop CC on OSX 10.7.5
Anyone seen this or have any ideas for a fix?
I also have my legacy CS6 installed on the same Mac - tried installing ACR 8.4 CS6 RC and that fails with the same dialogue box from AAM
The DNG converter installs no issue.
Thx
Chris.

Do you have some other software, like Photoshop Elements 12 on your system that would generally also be compatible with ACR 8.4 final but isn’t compatible with the RC because the RC’s only for PS users?
I installed the RC the same day it was released on my computer that has PS-CS6 & PS-CC with Windows 7 and it worked ok, so the update generally works, but something isn’t on your systems.
Are you up-to-date with your PS-CC version, which seems to be 14.2.1:
http://blogs.adobe.com/crawlspace/2014/02/photoshop-cc-14-1-1-update-now-available.html
And is CS6 updated to 13.0.6?
http://www.adobe.com/support/downloads/product.jsp?product=39 <http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh> &platform=Macintosh

Similar Messages

New router: cp1525nw wifi install fails with vague error message

Product: HP Laserjet Pro cp1525nw
OS: WIndows 8.1
Hardware: Asus laptop
Recently received new router from Verizon (FIOS), model FQG1100 BHR4 Router
Purchased printer in 2012.
Printer was working with old router; it won't communicate with new router.
Over four days I have repeatedly removed the printer from the laptop and tried reinstalling using the wifi method. The install instructions say to run the CD, choose wifi, connect the USB cable when prompted, configure, remove cable when prompted.
When I attach the USB cable the configuration starts, but it either times out ("taking too long") or fails with vague message about not finding the product. I am never prompted for an SSID.
I tried a USB install and that worked; so the USB cable is good.
Windows File & Print Sharing is enabled.
I've tried re-setting the printer to defaults, and ensured the wifi menu says "ON" for wifi.
I ran a wireless network test report:
PASS for wireless on, wireless working, and Security.
FAIL for Network Name (SSID) Found.
NOT RUN for: printer settings consistant with wireless router settings, No filtering, connected, signal strength, other networks detected.
Wireless netwrorks detected: 9
I note the router label does not statE "SSID", but says "ESSID".
I would appreciate any ideas for what to try.
Please post here or send message to [Personal Information Removed]
This question was solved.
View Solution.

Last night I finally got it to work. I removed the printer fully from the PC and rebooted. I turned off the printer. I ran a cable to the router (cable modem). I reset the router, which then assigned an IP address to the printer. I changed the security settings on the router to use WEP instead of WPA. I ran the HP printer setup program---and it finally presented me with the "provide SSID" screen. The program ran successully. I printed a test page. I changed the router secuirty back to WPA2. I printed another test page. I tried rebooting everything and printed again. I also tried removing the cable and then printing again---the printing failed.
In short, I needed to do two things: connect a cable and change the router temporarily to WEP for the install.
In my case, my printer is close enough to the router to run the cable. A little disappointing that the true wireless won't work, but I can print wirelessly from my laptop.
I've seen how a lot of people have had the same issue I had, and how HP is of no help in solving this issue. I'm convinced the printer has a flaw. I hope my posts will be of benefit to a few people having the same issue.

Install failed with exit code 11?

Hi,
I am trying to deploy a language pack and set the override language to English-US which I have created 2 programs for in my package. When the first program runs I am getting an error in the execmgr.log that "Install failed with exit code 11" Any
ideas what this means? When I run this command manually on the machine it works fine:
"C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
I checked the dism.log as well but I don't see any errors. Both logs are below, any help or suggestions would be greatly appreciated TIA
<![LOG[Command line = "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab", Working Directory = C:\WINDOWS\ccmcache\4j\]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr"
context="" type="1" thread="4976" file="scriptexecution.cpp:352">
<![LOG[Running "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab" with 32bitLauncher]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr" context=""
type="1" thread="4976" file="scriptexecution.cpp:370">
<![LOG[Created Process for the passed command line]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="scriptexecution.cpp:513">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
CommandLine = "\"C:\\WINDOWS\\System32\\Dism.exe\" /online /add-package /packagepath:\"en-us\\lp.cab\"";
DateTime = "20150127130028.509000+000";
MachineName = "";
PackageName = "";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 4976;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\WINDOWS\\ccmcache\\4j\\";
]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:715">
<![LOG[Raised Program Started Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976"
file="executioncontext.cpp:459">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[MTC task with id {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}, changed state from 4 to 5]LOG]!><time="08:00:28.525+300" date="01-27-2015" component="execmgr" context="" type="1" thread="5904"
file="execreqmgr.cpp:6288">
<![LOG[Program exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="scriptexecution.cpp:676">
<![LOG[Looking for MIF file to get program status]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="executionstatus.cpp:282">
<![LOG[Script for Package:LIA002A0, Program: Install failed with exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="3" thread="2488" file="executionstatus.cpp:252">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127130028.650000+000";
ExitCode = "11";
MachineName = "";
PackageName = "LIA002A0";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 2488;
UserContext = "NT AUTHORITY\\SYSTEM";
]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="event.cpp:715">
<![LOG[Raised Program Error Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488"
file="executioncontext.cpp:572">
<![LOG[Execution is complete for program Install. The exit code is 11, the execution status is FailureNonRetry]LOG]!><time="08:00:28.665+300" date="01-27-2015" component="execmgr" context="" type="1"
thread="1956" file="execreqmgr.cpp:4165">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[MTC task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D} deleted successfully.]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9070">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
<![LOG[Deleting request for program Install. Failing parent program InstallEN]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="execreqmgr.cpp:8147">
<![LOG[Requesting MTC to delete task with id: ]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
015-01-27 08:00:28, Info                  DISM   DISM.EXE:
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2015-01-27 08:00:28, Info                  DISM   DISM.EXE:
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.3.9600, Running architecture=x86, Number of processors=4
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Dism.exe version: 6.3.9600.16384
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Executing command line: "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Loading Provider from location C:\WINDOWS\System32\Dism\FolderProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Connecting to the provider located at C:\WINDOWS\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2015-01-27 08:00:28, Info                  DISM   DISM.EXE:
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2015-01-27 08:00:28, Info                  DISM   DISM.EXE:

Thanks, it seems as though it is not doing anything now. I just see that the policy has arrived in the log below but it is not installing it? The dism.log hasn't changed at all so it seems that it isn't even executing the command now? Am I missing something
else? I even tried re-advertising it though client center.
Command is now:
C:\WINDOWS\sysnative\Dism.exe /online /add-package /packagepath:"en-us\lp.cab"
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:52:28.943+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="5036" file="event.cpp:405">
<![LOG[Policy arrived for child program Install]LOG]!><time="09:12:48.440+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6867">
<![LOG[Policy arrived for parent package LIA002A0 program InstallEN]LOG]!><time="09:12:48.487+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6893">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="09:12:48.487+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:405">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "LIA20116";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127141248.502000+000";
MachineName = "";
ProcessID = 2012;
SiteCode = "";
ThreadID = 3528;
]LOG]!><time="09:12:48.502+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:715">
<![LOG[The user has logged off.]LOG]!><time="09:36:59.174+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4320" file="execreqmgr.cpp:5138">

SQL 2012 install fails with 'Object reference not set to an instance of an object.'

Hi, I'm trying to install SQL 2012 RTM Enterprise on a Windows 2008 R2 single node cluster.
The installer starts goes through some checks and then fails with the message 'Object reference not set to an instance of an object.' It happens while the small 'wait while...' dialog box is
showing, another window pops up briefly (I think the feature selection window - can't really tell as it doesn't draw before disappearing). Then the ‘Object reference not set’ message comes up.
From the summary log file..
Overall summary:
Final result:
Failed: see details below
Exit code (Decimal):
-2147467261
Exit facility code:
0
Exit error code:
16387
Exit message:
Object reference not set to an instance of an object.
Start time:
2012-09-26 08:52:53
End time:
2012-09-26 08:54:08
Requested action:
InstallFailoverCluster
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x9AF1AE5E%400x44A889F9&EvtType=0x9AF1AE5E%400x44A889F9
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()
I have rebooted, tried different media, tried uninstalling the setup files and rerunning but always get the same result.
Any help would be gratefully accepted.
Thanks,
Bruce.

Hi Alberto,
Whenever I am trying to install SQL 2012 with SP1 clustering, I am getting below error. Can you please advise on this.
Additional information are
Windows Servers Version and Edition - Windows 2012 Strandedition
SQL Server Version and Edition - SQL 2012 with SP1
All the machines are running on Hyper-V and Passed the cluster validation test successfully. there is no issue. The servers' (Nodes) names are;
DomainServerName - ACONDomainGroup (1gb ram allocated)
Node1 - AconNODE1W2K12STD (2.5gb ram allocated )
Node2 - AconNODE2W2K12STD (1.5 ram allocated allocated)
WindowsClusterName - AconWinCLTR
Below is Summary.txt Error
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()

Having installed Aperture iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

OK, fixed it. Found that iPhoto is now BACK in the App store.
Found iPhoto app in Finder and dragged it to Trash.
Downloaded iPhoto from App store and all now back working again.
Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
Nige

An attempt to install Adobe reader X on my Mac OS 10.5.8 failed, with this message: "Run preinstall script for application." What is that, and how do I do it?

An attempt to install Adobe reader X on my Mac OS 10.5.8 failed, with this message: "Run preinstall script for application." What is that, and how do I do it?

Hi renmusn79002737,
Could you please try installing Reader again from the below mentioned link:
http://get.adobe.com/reader
Ensure that you are logged in as administrator and anti-virus is disabled as that might interrupt downloading.
Try again and then let me know.
Regards,
Anubha

Flash Player Install failed with error code: 30

Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks. I'm posting this so the engineers will know what to fix in the next update version.
I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark. The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
The FlashPlayerInstallManager.log says:
2014-04-13 16:12:01 -0500 [I] IM: ---------- log start ----------
2014-04-13 16:12:01 -0500 [I] IM: All install checks pass
2014-04-13 16:12:01 -0500 [W] IM: Unexpected umask value for process: 0
2014-04-13 16:12:06 -0500 [I] IM: User does not have any processes that need to be closed.
2014-04-13 16:12:06 -0500 [I] IM: [install started]
2014-04-13 16:12:06 -0500 [E] RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
    NSFileCreationDate = "2014-03-27 04:20:43 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileHFSCreatorCode = 0;
    NSFileHFSTypeCode = 0;
    NSFileModificationDate = "2014-03-27 04:20:43 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 2541;
    NSFileReferenceCount = 1;
    NSFileSize = 13348;
    NSFileSystemFileNumber = 4892044;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeRegular;
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
    NSFileCreationDate = "2014-04-07 13:43:21 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileModificationDate = "2014-04-13 21:12:06 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 449;
    NSFileReferenceCount = 12;
    NSFileSize = 408;
    NSFileSystemFileNumber = 4552991;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeDirectory;
2014-04-13 16:12:06 -0500 [E] IM: [install failed: 30]
2014-04-13 16:12:06 -0500 [E] IM: Install failed with error code: 30.
2014-04-13 16:12:06 -0500 [I] IM: ---------- log end ----------

I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
Using the offline installer completely eliminates the errors seen with the stub installer.

DTM install fails with error 1935 on Windows 7

Trying to install DTM 600_b047 on a Windows 7 64-bit system. Install fails with
Error 1935 and HRESULT= 80073712. Have tried to run via Run As Administrator. It seems to get most of the way through before failing. (Without Run As Admin, it fails much earlier complaining about a cab file not found.)
Any ideas?

Hey adairlw,
Welcome to the BlackBerry Support Community Forums.
What security software is currently installed on the computer?
Also can I get you to re-name the install shield folder which is located under C:\Program files\common files. Once you re-name the folder, then try to install the software.
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I downloaded mavericks but the install failed. The message stated there was an error with the disk which required repairing.

Help please! I downloaded mavericks but the install failed. The message stated there was an error with the disk which required repairing. Using disk utility repair disk is not available ( greyed out) and verify disk stops and says disc requires repairing. So the online support page suggests I erase the disc and reinstall then back up from time machine ( I have a recent backup). But when I try to erase the Macintosh HD I get the message volume erase failed with the error couldn't unmount disk.
I'd be very grateful for any help anyone can give me.
I have a macbook pro 17" mid 2009- running on snow leopard 10.6.8 ... I lost the snow leopard disk so I don't know what to do from there ... I tried restarting by clicking SHIFT (safe mode) after the chime comes up, but It doesnt seem to make any difference ... please help !!
thank you sooo much
many many thanks for your hep guys !!

Whenever you install a new version of OS X being installed, the disk is checked just as if you were using Disk Utility checks the disk to see if the disk is damaged. And,, from what you report, your disk is damaged and needs to be replaced. This isn't a fault with Mavericks - your disk may have been failing for years.
It's a very good thing that you've a recent backup as you're going to need it. I would suggest that you evaluate what functionality that you need in a new disk and go shopping at OWC for a new drive - HGST (or any Hitachi), Seagate SSHDs or Toshiba drives are all good. Be sure that you buy an enclosure for the 'new' drive so that you can format it using Disk Utility before installing it into your machine - you can get one of those from OWC as well.
Good luck - call back with any questions...
Clinton

Installing OS4 - restore fails with error message 1014 - 3GS unusable

I tried to install OS4 on my 3GS iPhone. Process reported that a restore and update were required. The restore failed with error message 1014. This has rendered the phone unusable. Any help for me since Apple technicians from India weren't able to help.

Anyone got this fixed, I also have the same problem. I got an error during update, then the iPhone went into Recovery Mode and iTunes says it has to be restored and updated, but the restore has taken over 15 hours know and Applecare told me to wait or come to an applestore... I'm on holiday in Europe and I have a 12 hour fligth in a few days back to the US...

Cumulative Update 3 client update install failed with code 1642

We have SCCM 2012 R2 and recently updated to CU3
Existing client is version 5.00.7958.1000
Pushing update package created during CU3 update failing on some computers
I am trying to update some of laptops using CU3 x86 update and getting following errors
Script for Package:ABC00126, Program: Cumulative update 3 - x86 client update install failed with exit code 1642
I have reviewed many forms but couldn't find relevant.
Update works on about 70% on machines with same image but failed on rest with same 1642 error
Same issues occurs applying client on during TSequence on some of machines.
It is very inconsistent,
Any help would be greatly apprciated
Thanks
RJ
RJ09

I verified package does copied over in ccmcache folder.
Also try to run update package using pstools, got error same as Torsten mentioned.
Here are logs from client.
Checking content location C:\Windows\ccmcache\gt for use
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully selected content location C:\Windows\ccmcache\gt
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Executing program as a script execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Found executable file msiexec.exe with complete path C:\Windows\system32\msiexec.exe
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully prepared command line "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Command line = "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous, Working Directory = C:\Windows\ccmcache\gt\
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Created Process for the passed command line
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "ABC212D1";
ClientID = "GUID:f298da2e-dfd1-428e-8b3c-b03602f95719";
CommandLine = "\"C:\\Windows\\system32\\msiexec.exe\" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\\Windows\\TEMP\\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous";
DateTime = "20150114005604.541000+000";
MachineName = "DH-07";
PackageName = "ABC00126";
ProcessID = 3496;
ProgramName = "Cumulative update 3 - x86 client update install";
SiteCode = "abc";
ThreadID = 2588;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\gt\\";
execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Raised Program Started Event for Ad:ABC212D1, Package:ABC00126, Program: Cumulative update 3 - x86 client update install
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
MTC task with id {8EB498C5-71D5-4933-BA80-6EEB8E189F98}, changed state from 4 to 5
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Program exit code 1642 execmgr
13/01/2015 6:56:04 PM 2784 (0x0AE0)
Could some please review and advise..
Thanks
RJ09

Flash Player Install Manager[681:16322] Install failed with error code: 30

OS 10.10, MBP 2011 i7, latest updates. I ran the installer by opening up the app package and invoking the install via terminal. at the 75% mark ( download finishes ) the installer fails. in the terminal I got this maybe helpful error message. any idea on getting flash to install ? its worse because I've run the uninstaller so parts of various websites don't work now
S

ok, its a permissions error because the installer isn't at the right run level, even asking for my admin password. if I do
sudo Install Adobe Flash Player.app
[enter password]
Installer now runs. it generates a bunch of error messages in the terminal
Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
Reason: image not found
——— does this about 10 times ending like this -------
2014-10-28 22:03:10.831 Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
Reason: image not found
2014-10-28 22:03:47.190 Adobe Flash Player Install Manager[764:19989] Install failed with error code: 17.
the install actually finishes though and flash is working… YAH ! but only a semi uber geek would ever figure this out or think to try it. please fix the installer as its got a problem under 10.10

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

All crawl jobs are failing with errors, Query server not responding.

Hi All,
I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
Errors:
"The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
"The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
Please suggest some resolutions.
Pavan

Hi Pavan,
1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
4. If all above does not work then remove
the anonymous access (if enabled) and restore the site collection to a new new site.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

ACR 8.4 CC RC install fails with AAM message 'patch not applicable'

Similar Messages

Maybe you are looking for