ACR 8.7 has been released with support for the Nkon D750.  Why no Lightroom support yet?

ACR 8.7 has been released with support for the Nkon D750.  Why no Lightroom support yet? Am I wrong or was support for the D810 available far more quickly?

ACR 8.7 has not yet been released. The ACR 8.7RC has been released. It is a Release Candidate - and as such, is not a final version.  I wouldn't be concerned about a lack of Lightroom support until a final version is released.
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs

Similar Messages

  • PR has been released, but i found the plant input is error.

    PR has been released, but i found the plant input is error. i want to correct the plant, and i wish the release info is saved, i.e. the manager needn't release the pr again. is it posssible?

    Hi,
    You can modify the PR but will the changes trigger the Release strategy depends on the configuration which is done in your system.
      If the Release Indicator is assigned for triggering the RS if there are any changes in PR the RS will get triggered and if it is not assigned it will not trigger.
    Please check the Release indicator configuration on weather the Indcator are set for changes.
    Thanks,
    Vijay

  • HT4623 I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

    I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

    Try a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • HT4098 my credit card has been charged several times for the same purchase

    Hello,
    Do you know how I can connect with I Tunes support, my credit card has been charged several times for the same purchase.

    You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router

    Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router. However they all show to be connected with their corresponding bars and the ip's are all fine. Earlier today it started flucuating on and off about every 5 min making work impossible and now it seems to be completely broken (im currently on my iphone connected though its own internet) Does anyone know how or ehy this happened and how i can fix this? And to know if this originates from the router or something else entirely. Thank you!

    Hi - some clarifications would help narrow down some symptoms - just what has been turning off? - has the light been solid green but the modem isn't providing wi-fi? - or is the light flashing yellow with no internet? - which can mean several things - does the light go out completey? - so if you can report on exactly what is happenening and when, maybe someone can help you - we also need to know if there any error messages along the way -  we also need the types of devices involved and how they are attached - kind of like a nework map  - the more info that you provide, the more answers you will get.
    Regards,
    Charlie    -

  • Is there a row limit that has been set in CMC for the LOVs?

    Hi,
    Is there a row limit that has been set in CMC for the LOVs? I get a 'Partial results' message for big LOVs. I am talking about BW prompts LOV`s.
    we have 22,000 LOV`s but we will get 5000 LOV`s in prompts. so we need to do manual search to get list .
    we are in 4.0 sp2 p10

    Hi,
    I understood that value need to be changed in webi_client_default_parameters.xml file but under
    "Program Files > Business Objects > BusinessObjects Enterprise 4.0 > win32_x86 > config" location I do not see
    the file webi_client_default_parameters.
    we are under 4.0 SP2 P10....
    Could some one help me out.
    Edited by: sumanmanu on Feb 8, 2012 5:24 PM

  • Tether support for the Nikon D750 in lightroom 5

    Will there be tether support for the Nikon D750 in Lightroom 5

    You are absolutely correct Lightroom does not have tether support for the new Nikon D750. see the list of supported cameras.
    Tethered camera support in Lightroom
    Nikon need to provide the required sdk info for the camera to enable Adobe to work on adding tether support.

  • I downloaded ICloud yesterday and it has been backing up/syncing for the past 18 hours.  Is this normal? Should I stop the back up and try to re-sync or just let it keep going.   I use the 3G network (WiFi) with Verizon

    I downloaded ICloud and IOS5 yesterday afternoon and it has been backing up/syncing to IPAD since 7:30 PM (over 18 hours).  Is this usual or is there a problem with what it is doing.  Should I stop the backup and start over or just let it keep going?  I have WiFi, 3G through Verizon and it is rather slow.  I am afraid that it might be using up all my available data allowance and is going to create a huge phone bill.  Can anyone advise me as to what I should do?  Has anyone had this problem before?  Any help would be greatly appreciated.
    Thanks, Lucy

    You are downloading the update to iOS 5 and that would have to be done within iTunes on your computer using a WiFi network. The 3G service on the iPad is not being used for this or are you downloading some way that I've never heard of?
    There is no way that it should take 18 hours so something has gone wrong. What stage are you stuck at? What does the iTunes progress bar indicate?

  • HT1688 My iphone 4S has been crashing every app for the past two days! Ive done a factory reset and it still is doing it

    For the past two days my iphone 4S has been crashing every app and cutting out while I'm talking  I did a factory reset but it's still doing it HELP

    http://www.apple.com/support/macbookpro-videoissues/

  • I was wondering if someone can help me with my problem. My ipod touch has been in recovery mode for the past three days. I keep trying to restore it but it keeps saying "The ipod cannot be used because the Apple Mobile Device is not started." Help?

    I was updating my itouch that was jailbroken then it just went to recovery mode. I don't what to do anymore.

    When I went to services and clicked on Apple Mobile Device, I could not see stop the service.

  • HT1212 how can i restore a ipod that has been disabled with a different computer

    how can i restore a ipod touch that has been disabled with a different computer

    Restore it in Recovery Mode: http://support.apple.com/kb/HT1808

  • Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

    Hello
    I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
    deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
    industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
    message arose on my iPC:
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
    Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    NI-XNET:  (Hex 0xBFF63147) The database information on the real-time system has been created with an
    older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
    database to the real-time system. ========================= NI VeriStand:  NI VeriStand
    Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
    VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
    Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
    Definition file... • Connection with target Controller has been lost.
    The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
    almost the same. The only differences are:
    1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
    2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
    3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
    4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    1. LabVIEW Real-Time 11.0.1
    2. NI-488.2 RT 3.0.0
    3. NI_CAN 2.7.3
    Unfortunately the above stated problem still arose.
    What can I do to fix this problem?
    I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
    There it is written to deploy the dbc file againt.
    If this is a good hint, so how do I deploy a dbc file?
    I would feel very pleased if somebody could help me! :-)
    Best regards
    Lukas Nowak

    Hi Lukas,
    I think the problem is caused by differenet drivers for the CAN communication.
    NI provides two driver for CAN: NI-CAN and NI-XNET.
    NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
    You wrote:
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    3. NI_CAN 2.7.3
    NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
    Regards, stephan

  • Problem In F110  with status message " Payment run has been released "

    Dear Friends,
    We have an Strange issue in payment program...
    While executing the payment program they got below Status Messages
    Parameters have been entered
    Payment proposal has been created
    Payment proposal has been edited
    *Payment run has been released 13.05.08 15:42:58
    Program ends up without single payment....While trying to Delete the Proposal or Payment those selection are in grey color (Deactivated Mode) ...
    With same parametrs we have tried to run another payment run but there is no proposals selected...
    Question :
    1) How can I delete 1st Payment Run Proposal as well as Payment ID's
    Could you please Advise Neccessary actions which is required for solving the issue...
    Thanks in Advance
    Regards
    Suresh Polineni

    You can delete the payment run proposal in the following sequence
    1) first delete the output file
        Edit-Payments-Delete output
    2) delete the proposal file
         Edit-proposal -Delete
    3) if u want delete the parameters also in the similar way.
    for digging the problem why the payments are not happened, just check the exceptionals list then u can easily catch the error point.
    I hope it will provide some clue to clear your problems.
    Regards
    Madhav

  • Running F110 with message "Proposal has been released 07/22/10 06:42:33"

    Dear experts,
    When I made proposal through F110,  it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10 06:42:33" appears, I also check SM37, but I can not get the spool list.
    What could be the reason?
    Thank you!

    In the first tab of your F110 screen, you'll get the status of your processing.  It will update for each event.  Check if you are getting things like the following.
    Parameters have been entered
    Payment proposal has been created
    Payment proposal has been edited
    Payment run has been carried out
    Posting orders: 1 generated, 1 completed
    If you are not getting any of the above, you can check that step and analyse the log.
    Since you are getting as released, i think the proposal run has not carried out.
    Ravi.

  • ContactSheet X (CSX) v1.4 has been released

    ContactSheet X (CSX) v1.4 has been released.
    The biggest change with this rev is the addition of PSCS4
    support. Other changes include better support for metadata in captions
    and templates, improved color profile handling, and improved error
    handling. A complete list can be found in the Release Notes link
    below.
    Download Page
    https://sourceforge.net/project/showfiles.php?group_id=173281&package_id=207621
    Release Notes and Change Log
    https://sourceforge.net/project/shownotes.php?group_id=173281&release_id=641810
    Home Page (includes link to PDF docs)
    http://ps-scripts.sourceforge.net/ContactSheetX/csx.html
    This has been tested on PSCS3/4 on OS X and XP. It may still work with
    CS2, I just haven't tested it there this time around.
    As always, let me know if you find any problems.
    -X

    [email protected] wrote:
    > I ran this script but I am running into a problem. How come it only does the first five documents in the folder. It will not do that rest. Is there something I have to modify?
    Email me me the ContactSheetX.log file (see the README file for its location on
    your system) and I'll see if I can determine what's going wrong.
    -X (xbytor at gmail dot com)

Maybe you are looking for

  • Bit-Locker Repair BDE Image Problem

    So Executed Bit-Locker and output it in a image, now I'm doing this for weeks now because there are problems and research and I came in a dead end. Unfortunately the log is not save :( so I don't have anything to show but here is the deal around 25%

  • How do I purchase an additional licence for Adobe Acrobat X Pro?

    Hi, We purchased this software a few years ago for use by two members of our staff - we now need the software to be available to a further member of staff, and so I need to know how to purchase additional licences so that they can use the software at

  • Is anyone's IPhone 6 camera taking multiple pictures, or is my finger that jumpy?

    Whenever I take a picture with IPhone 6, there are two of them.  Not talking about one in Camera Roll & one in My Photo Stream......I mean there are two exact pics.  Is this happening to anyone, or is my finger that jumpy that I take two pics without

  • Backlighting Issue

    My iMac has a weird backlighting look to it. The two lower corners are where it really stands out. They are clearly much brighter then the rest of the screen. Here are two pictures but I really just wanted to know if this is normal or do I have a pro

  • Como puedo recuperar las respuestas a las preguntas secretas

    no puedo entrar a app store porque olvide las respuestas a las respuestas secretas.