ACR + Canon 5d2 with firmware upgrade?

Canon released a frimware upgrade for the 5D Mark II which claims to fix the "black dot" problem and a SRAW1 banding problem. Very little feedback has been reported by users, but some reports imply that the new firmware creats a new RAW file that can not be properly processed by current raw converters. Claims are that old converters will convert the new RAW files, but with some wierd color shifts.
That claim is fueled by Canon's own statement that you must get an updated version of their DPP program to properly process the new RAW and SRAW files. But what about Adobe Camera Raw? Can anyone confirm or deny that old/current versions of ACR will not properly process 5D Mark II raw files?
If true, is an update to ACR coming? More important, will Adobe be able to apply whatever correction is necessary within the DNG Converter? So those of us with CS3 who are stuck forever with ACR 4.5 can process firmware-updated 5d MarkII raw files correctly?
Not a critical problem, because you can apparently function quite well without the firmware upgrade. But the upgrade is a path of no return. Once upgraded, you can't go back to the original firmware version if problems with ACR exist.

Looks like they might have done pretty well with the dots (although this
is just one small example):
http://www.imaging-resource.com/NEWS/1231455914.html
Firmware Version 1.0.7 is for EOS 5D Mark II cameras with firmware up to
version 1.0.6. If the camera's firmware is already version 1.0.7, it is not
necessary to update the firmware.
Greetings,
Debra from "Link removed"
Link removed by:
IanLyons
Forum Host

Similar Messages

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I select the images I want uploaded, NEF files, click the "IMPORT" button, process bar comes up and shows work in progress, but no progress. after about 2 minutes, dialogue box appears with message: "unable to import because the following files are unreadable: NEFxxxx, etc."

5300: Problem with firmware upgrade

Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?

16-Mar-2008 09:50 AM
omensa wrote:
Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?
Get it updated at Nokia care. If the phone is in warrenty they do it free for you.
If my post has helped you please click the white star on the right

Did scan to Diskstation stop connecting with firmware upgrade CLP1CN1516AR

I use my HP 8600 N911g almost daily to scan to LAN network attached storage, in this case a Diskstation. As of today I cannot scan to the Diskatation any more, it just will not connect. I have tried powering off in turn the printer, the router, the diskstation, letting each sit for 1 or more minutes before restarting, to no avail. I can print from my laptop to the printer, i can ping it via IP address and computername, I can open up its web interface and test the network locations - four are defined on the Diskstation, none of them connect. I created a new definition of an existing folder on the Diskstation and tested that, it also could not connect. From my laptop (Windows 7 SP1 64) I can access the Diskstation folders fine through both Windows Explorer and a command line interface. HP diagnostic tools on my laptop all run fine except for the scan test, which pulls in both sheets of paper from the ADF tray but the second sheet does not quite get ejected and the test locked up my printer; cancel and power button did nothing so I had to unplug it. I noticed yesterday that my printer said it was downloading an upgrade but eventually it aborted. Today I ran HP 8600 tools and it said I was up to date. It reported firmware version CLP1CN1516AR, which I understand was released 7/20/15. Could this upgrade be the problem? My printer is connected via ethernet to a LinkSys router that is bridged wirelessly to a Verizon FiOS ActionTec router to which the Diskstation is ethernet attached. This system has been in place for a year or so. My laptop, bridged router and printer are all within 3 feet of each other, the ActionTec is 30' away through two walls, my latop rates the ActionTec 4/5 bars in Windows icon or -59 dBm from Xirrus WiFi Inspector, from near to the printer. Vey frustrating. Any ideas, please?

I was called by HP Support, they reached me Friday just as I was about to leave to go on vacation for two weeks. They had read this thread and knew it was more than just me. They acknowledged a problem and assigned me a case number but closed my ticket, I need to call them when I am back on the 24th August so we can work to find a solution. They will open a new ticket then.
I hope HP will contact you and open a ticket for you and resolve the problem and issue a new firmware upgrade including the fix so that I can try it when I return, but that might be a stretch as presumably it goes through some QA testing before they release it. At least they should start working on it with your help.
Please keep us posted on any developments.
For a workaround I enabled scan to computer and email scan. I tried webscan interface and it scans but when finished it says click the save button to save but there is no save button, the two scan and cancel buttons remain unchanged from before initiating the scan. I tried both of those and they do what they say they do and don't save. I can see a preview mini image of the page and if I hover over it it presents a series of icons including a diskette but when I click that I can go through the motions of saving but the file is empty. The email scan is easiest to use, I send to myself and it takes a few minutes after scanning to appear in my inbox and sent folder. From there I can download to NAS or forward as an email. But compared to scan to network it is much slower and more labor intensive.
Good luck, both of you (pcni & greylisted).

Vision M - no connection with firmware upgrade with WMP

Now I know there's been a lot of fuss about WMP and firmware upgrades but I've got a problem with WMP0! If I connect my Vision M to the computer within seconds the Media Explorer page comes up and I'm away - success. If I run the firmware upgrade (ZENVision_PCFW_L6__42_0.exe) it comes up and says player is not connected. If I re-connect, Media Explorer pops up again and says player is connected but the firmware upgrade exe is still saying the player is not connected. It doesn't matter how many times I disconnect and reconnect, the upgrade program does not recognise the player! I checked WMP and that is version 0. So is this an earlier problem that someone's got an answer to I don't think I'll go to WMP! My Zen is version .40.02 and I'm trying to upgrade to .42.0. Please help?Glazza

Perhaps the player is faulty? Try to contact CS and see what they have to say:
http://us.creative.com/support/

Having problem with firmware upgrade on WRT54G V8

i have searched the forums but havent found an answer. i just got a WRT54G V8 router and was about to update the firmware. i downloaded the .bin file and went to my router ip addy and then to the firmware upgrade tab but when i went to click the browse button nothing happened. does anyone know whats wrong?

If you are using the wireless computer then,do not use it to make any changes or upgrading the firmware on the router.Use the wired computer.If you are using the wired computer then,try to use the different browser (preferably IE)or different computer.
If that does not make any difference then,hard-reset the router and try to upgrade the firmware.

Problem with firmware upgrade with new battery.

Replaced battery on 30gb Vision M, with the original firmware of .40 - kept just a half charge. Went to install firmawre .62, and got stuck in reboot for about 30 minutes. Unplugged the cable, and now player's blue light flashing, and computer does not recognize player. The battery was already half empty, I hope I did not fry the new battery. Tried to reset while holding the on switch, and no go. I saw somewhere that I might need a dedicated power source other than USB to recharge the new battery. Was I supposed to update the firmware in increments? Just got this thing after years of SANSA use, and really like this one. Any advice or help is much appreciated. -Nash

If you don't already have one invest in a wall charger for the player. The PSP (playstation portable) wall charger will work with it. Keep trying to boot to Recovery mode after you have charged? the battery then start over with doing the firmware.

Firmware upgrade SRW2024

Hi everybody (and sorry for my bad english) ...
This is probably a easy task for all of you, but i have to upgrade the firmware of 3 SRW2024 for the first time and i'm a little scary (especially for the fact that the switches are of the company where i work)
I have read the manual that i found on the linksys website but the described menu are quite different from the web interface of my router.
So the 3 question are...
1- it's possible to upgrade the firmware via web interface?
2- is this (link) the correct menu for upgrade firmware through web interface?
3- How long will take the switch upgrade?
Thanks to everybody for the help

Hope that the link below can help you with firmware upgrade
How do I upgrade the firmware of the Switch via TFTP? (link)
How do I upgrade the firmware of the SRW switch? (link)

Zen Sleek Firmware Upgrade, now my Zen is kap

First off, if the answer to this has been posted I apologise, Ive been trying to sort this out for about 4 hours now and I've tried every fix Ive found listed on this site.
ok, here goes
I wanted to get stuff from online music store, looked it up, found that firmware updgrade 2.0.03 was needed for Play-For_sure functionality.
Downloaded it, did all the bits n pieces, shut down everything, unchecked the detector etc etc etc, double clicked the the firmware to install, and it started.
About 2 mins in, the player reboots, and one of those annoying WinXP windows pops up asking what I would like windows to do each time I connect this device (A) use WMP0, (B) use mediamonkey or (C) Take no action. I selected C.
Player shut down, and the message onscreen was player was rebooting........90 mins later still the same thing.
I was loath to disconnect the player or fiddle with it in any way as I know from past expierence, messing with firmware upgrades can be tear jerkers, so I looked around this site before I did anything. On seeing nothing about firmware stalls I did the only thing I could, tried the firmware installation again, but my PC could no longer loacte the player.
I started trying everything listed, recovery mode, format, reload firmware, checking the USB cables on other PC's etc etc etc
My Zen Sleek is now, it seems, completely buggered. There is now no firmware on it, and my PC cannot locate it at all.
OS: Win Xp
Player: Zen Sleek 20gb
Firmware: (It was .00.05 then upgrade to 2.0.03)
Can anything be done?

I had the exact same problem as Drake. I tried to update the firmware, it didn't take, now my Zen Sleek has no firmware on it and the firmware update that I downloaded from Creative tells me that my player is not connected and will not let me install the updated firmware.
While the firmware download (ZenSleekP4S_PCFW_LB_2_0_03.exe) does not recognize my Zen Sleek, but Windows recognizes it, and it shows up as "Zen Sleek" in the device manager.
I installed the first hotfix from the KB article listed above. That worked fine. I tried to install the second hotfix, but Windows said that the 2nd hotfix was already installed on my system.
I then did the registry edit. There are two "CurrentControlSet" entries under HKEY_LOCAL_MACHINE\SYSTEM. I navigated to the USB folder in each and changed the permisions for each.
I then uninstalled the player from the Device Manager and rebooted.
After reboot, Windows recognized the player again and it shows up correctly in the Device Manager.
However, the firmware update still tells me that the player is not connected and will not let me install the firmware.
Help, please.Message Edited by bsteggeman on 07-09-2006 07:39 PM

Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade

Is anyone having issues with Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade?

Yes, just experienced it yesterday at a shoot after upgrading to 1.0.2 two days ago. Have you found a solutions yet?

Sky Router firmware upgraded - can no longer login with credentials

I usually have no problems accessing my sky router (white Sky Hub with ADSL) via the page 192.168.0.1 however I tried to login the other day and was greeted with an updated looking summary screen - all very nice I thought, let's go and explore! However when I put in the usual details - username: admin, password: sky I get prompted to input my details again which is very odd. Now I know that I am the only one who accesses the router in this way as my flatmate has never logged in and probably never will so I can only assume the firmware upgrade has caused the password/username to change. I logged in the other week and the password is saved in my browser so I am sure I am not making any mistake here. I have tried in chrome and IE just in case but I have the same issue in both. Has the new firmware brought a new default password? I cannot find any reference to this anywhere on this site so it seems unlikely. I would rather not reset my router to default settings as I have devices with static IP addresses and port forwarding setup that will take me some time to reconfigure. I don't think there is any feature to backup the config unless you are actually logged in to the router but would love to be worng about this. I am guessing I will have to bite the bullet and reset to factory defaults but would welcome any help or suggestions if possible?

After review the events of the morning.....
I normally keep my routers in the basement where my eth jacks all hub. High on a shelf, I got reasonable coverage on 2.4Ghz even on the second floor. I went to this router for the Dual mode, but found the 5Ghz didn't make it sufficiently well to the second floor. So it was moved to the first floor, on a counter. That morning the router started acting up a bit, not bringing an iphone online. It was looked at - and a couple of post cards that had been placed on top, removed. Air flow was not blocked around the sides in any way - just a few pieces of card stock on top to interfere with convection off the top.
1. There is no way to look at temperature - maybe the device doesn't even know its own temp.
2. There is no fan that I can discern. Clearly, creating a device that is designed to sit on a flat surface in a home environment ought to take into consideration "normal impediments to air flow". Temp controlled fans is simple, well proven tech.
3. This design is small, has TWO radios, sits horizonal (thus is going to have lousy convection) - seems to me an engineer ought to have given more thought to not only providing the user with easy to obtain data (temp), alternative methods (fan/vertical mounting) and/or self-protection (to hot, I'm shutting down rather than corrupt my database).
Having spent millions on Cisco gear in my career, I would have hoped that Cisco+Linksys would have a little more Cisco and a little less Linksys.
me

Would you buy an n200 when firmware upgrade a problem or go with nan

My dealer has both the n200 and nano with n200 a bit lower in price.Would you go with n200 if no firmware upgrade seems to exist or go for the nano?Does the n200 have decent firmware in it so upgrade not needed?Is there firmware out there to stop the backlight buzz? thanks matt

First of all, compare the n200 to the Nano Plus. The Nano lacks FM radio and doesn't come with the case and armband(In the US both the n200 and Nano Plus have FM and the case and armband. In other places the case and armband might not be included). I would tend to want the Nano Plus if it is close in price to the n200 since going forward firmware upgrades for it will probably be available for longer than for the n200. Some of the earlier n200 firmware does have issues, especially that before .2 . If you do decide to buy an n200 you should plan to do a firmware upgrade as soon as you get it. It is not easy to tell what firmware an n200 will have just by looking at the package. If the price of the Nano Plus is $20 or more above that of the same capacity n200, then I would prefer an n200. If the Nano Plus is only $0 more then I would prefer the Nano Plus. Between those I guess it is a toss up.

**SPA2102 FIRMWARE UPGRADE PROBLEM WITH 5.2.12

I'm having problems loading firmware 5.2.12 onto my SP2102-R ATA. I have my laptop PC running Windows 7 directly with an ethernet cable from my laptop to the ethernet connection on the back of the SPA2102. I run the .bin file and In order to get the software to the upgrade stage I have to enter ****, 73738 1# to move to the next stage. I have now been waiting for 1/2 hour waiting for firmware download request from SPA. IT DOESN'T GET PASS THIS STAGE.......CAN SOMEONE PLEASE TELL WHAT I'M DOING WRONG OR WHAT I NEED TO DO DIFFERENT?
Thanks......

Based on my experience with the SPA2102-NA, it is not necessary to do a factory reset (*73738) in order to perform a firmware upgrade/downgrade.
However, now that you have done so, any and all previous user settings will have been reset to the original factory settings (including user set passwords - assuming your ATA is an un-locked SPA2102-NA).
If you think the firmware 5.2.12 is faulty, then repeat the upgrade/downgrade process by downgrading back to an earlier version:
http://www.cisco.com/cisco/software/release.html?mdfid=282414111&softwareid=282463187&release=5.2.12&relind=AVAILABLE&rellifecycle=&reltype=latest
If you are still having problems, see if this tutorial will reveal any procedural issues:
http://blog.cqvoip.net/2009/12/linksys-cisco-spa2102-updating-firmware.html
Regards,
Jeff - cqvoip.net

Hr2000 firmware upgrade troubles with external triggering mode

Hello,
Has anyone had any problems with the latest Ocean Optics HR2000+ firmware upgrade while using external triggering mode?
I'm using the NI-provided drivers for HR2000+ which used to work without a problem before the driver update. My program synchronizes 3 spectrometers so that they continuously acquire spectra at 1 second integration time while being triggered by a pulse generator running at 20 Hz. It used to be that the specs would trigger again only once the previous integration completed, but now the spectrometers try to trigger with each trigger and don't complete the 1 second integration. My code has not changed at all between firmware upgrades, and I expected it to work exactly the same after the upgrade. I've reinstalled all programs, inf, and sys files related to the driver as well.
Do I have to wait for a new NI-Driver update that adjust to the new firmware update? Attached is the driver package I'm using.
Any clues as to what I can do about this?
Thanks,
Mike
Attachments:
Ocean Optics 2000 4000.zip ‏582 KB

Attached is a sample VI for what we're attempting to do. This used to work before the Ocean Optics firmware update.
Attachments:
specs_with_trig_post_firmware_upgrade.vi ‏57 KB

7920 cannot register with AP after firmware upgrade

We have a customer using 7920 with Firmware 1.08.
He tries to test the Beta firmware (cmterm_7920_3.3.02_05_005.bin) on some 7920.
The upgrade finished correctly and after reconfiguration, 7920 register to the APS.
On two devices, he got a problem:
- The configuration menu is hidden. We try to enter the sequence *## send but without success.
- The reset with sequence *7#9#2#0#* is not working (it was working on other 7920 when locked by password)
- USB parameter is hidden, so we cannot activate it.
- We try to download an old firmware (cmterm_7920_3.3.01.03.bin) trough USB port, using the boot function after power on, but we got the message: ERR304-Memory insufficient to upload the firmware image.
- We try to use an AP with basic configuration, broadcasting SSID cisco or tsunami, but 7920 stay with the message No AP found.
So, these two 7920 are unusable now.
Have you any suggestion? Daniel Bill

First off 02-05-005 is not a 7920 image. He may be using 02-01-XXX, which is an engineering image and shouldn't be used in production. Can try Menu->*##->Send then config menus will be unhidden.
Also *7#9#2#0#*, will just factory default the phone if phone lock is enabled, where you are prompted for a password at power on.
Are you saying the phone will not boot now? If so, then call TAC. If they can boot, you can enter admin secret to expose hidden menus and enable usb to upload the firmware via USB or either configure the 802.11b paramaters to upload via TFTP wirelessly.

ACR + Canon 5d2 with firmware upgrade?

Similar Messages

Maybe you are looking for