ACR corrections not showing up in Bridge previews

I made a lot of color and tonal corrections to CR2 files (from a Canon 5D) in Camera Raw. When I go back to the folder in Bridge the "old" previews only show up (looks like generic previews); as I scroll thru the images, each time I select an image preview, it shows up with the old preview and then after about a second or two the "corrected" preview appears.
I tried selecting Cache > Build and Export Cache as I thought this would generate new previews but it doesn't seem to do it?
ACR 4.6.3.0.30
Bridge 2.1.1.9
CS 3 10.0.1
OS 10.4.11 Dual Core Intel
Thanks for any suggestions,
Alan.

What maybe happens is that Bridge shows you the JPEG that is inside the RAW file, then the developped image. Normally, this only happens on the first visit of a folder.
Try to copy the files and XMP to another folder; then purge the cache of Bridge for that folder; to see if it would re-build properly on a later visit.
What is the size of Camera Raw's cache? What are Bridge settings for the Cache? Is it the case for every folder? how many files in there? Is it s a local folder?

Similar Messages

  • ACR adjustments not showing up in Bridge

    I've done some searching but have not found an answer to my ?  So hope it isn't a repeat.  I'm on a iMac with 16 gig of RAM and updated graphics card running the latest version of Lion.
    After downloading the beta of CS6/ACR7 I have noticed that if I'm working on a photo in ACR and click "done" (not save image), the ACR adjustments don't always show up in Bridge.  Sometimes it might show the adjustments and other times it doesn't.  Doesn't seem to matter if the raw file is NEF or DNG.  It is very hit and miss.
    I did an update on CS5 before I downloaded the beta of CS6 and I've noticed that it does the same thing.  Went to my lap top with none of the latest updates and all adjustments in ACR show up in Bridge.  I compared ACR and Bridge Preferences and all was the same between the machines.  (Lap top is a MacBook Pro 15").
    Anyone have any idea what needs to be changed so all adjustments in ACR show up in Bridge?  If the adjustments in ACR are all I need to do, it is frustrating to have to do a "save image" and make a duplicate just to get the adjustments to show up.  I can use LR and have it work this way, but I prefer ACR.
    Thanks,
    Sue

    Thank you Ann!!!!!  That was the problem.  I sure appreciate your help.
    Sue

  • Raw files for nikon d810 not showing a picture in preview. Have  camera raw plug in 8.6.0.250 . File will open in raw but no picture ahead of time.

    Raw files for Nikon D810 not showing a picture in preview for photoshop cs6 . Have camera raw plugin 8.6.0.250  File will open in ACR and process but no picture before opening raw file.

    Are you referencing Apple's Preview application or the Preview panel in Bridge?  Huge difference.
    Try purging the cache for the offending folder(s) through the Tools menu in Bridge.

  • ARQ: Role Import does not show roles in the preview

    Dear All,
    Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
    I implemented SAP note#1897975 Role import does not show roles in the preview.
    Still facing the same problem. Has any one faced this problem? Please suggest.
    Regards,
    Faisal

    HI Faisal,
    This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
    Regards,
    Neeraj Agarwal

  • The approver does not show in the approval preview after saving sh. cart

    Hi ,
    I would appreciate if anyone can reply me for fixing the problem.
    Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.
    Details of the problem:
    The following steps specify the problem in detail , it is applicable for both the workflows “WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.”
    1.     Shopping created
    2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
    3.     Shopping cart is saved.
    4.     After saving , Check status transaction shows the shopping cart in status “awaiting approval”
    5.     The section approval shows “ No workflow started , application error occurred”
    6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
    7.     The work item container does not show any agents
    I would appreciate it anyone can reply as to how to fix it ASAP.
    Best Regards
    Pawan

    Hi Disha,
    I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
    In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
    SLG1 shows all green entries and there are no entries in RZ20.
    I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
    What should I do.. , anything am I missing .
    Thanks and Best Regards
    Pawan

  • LR adjustments not showing up in Bridge CS2

    When working with .DNG files in LR, it seems that Develop settings show up in Bridge CS3 (beta), but only some show up in Bridge CS2; the same is true for metadata, but only sometimes -- keywords tend to show up, Location, City, etc. don't. Using the "Export XMP Metadata to File" doesn't seem to make a difference.
    For example: if I adjust the contrast, then export xmp, I can see the difference in Bridge CS3, but not CS2. But if I change the white balance, the change shows up in both versions of Bridge.
    Any thoughts?
    Thanks,
    Martin

    Brilliant, Geoff! I had downloaded ACR 3.7 for the DNG converter, but apparently hadn't installed it for Bridge/Photoshop CS2, which were still using 3.6. I used "updates" in the Help menu, and 3.7 was installed automatically. All of the LR adjustments now show up in Bridge CS2.
    Thanks!
    Martin

  • Some NEF files and also JPG's Not showing up in Bridge CS4

    I have purged the Cache, restarted my computer..ect... yet the previews DO NOT SHOW UP for some of my images. It is random so I am unsure of what to do to recify this problem
    Message was edited by: SueBarrPhotography

    Bridge Macintosh

  • After Effects Rendered Color Correct Not Showing In Premiere

    Hello all,
    I have recently made a short film with a few effects in Premiere and After effects CS4.  I have used the Dynamic Link to accomplish this.  I have added color correction with Color Finesse in After effects.  The problem is I some of the color correction is not showing up in Premiere once it has finished.  Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well.  I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
    Is anyone else haveing this problem?
    Do you think it's something wrong that an update will fix?
    Maybe a new codec?

    Mylenium is correct, the LE version of Color Finesse included with CS4 is for use in After Effects only. To use Color Finesse inside of Premiere or AME you'll need to upgrade to the full PI version. You can find information on available upgrade paths at http://www.synthetic-ap.com/cfupgrade
    And if anyone has the PI version and the color correction is disappearing when rendered by AME, be sure to update to the latest version of Color Finesse. Version 2.1.10 corrected an issue that would cause that symptom.

  • BRIDGE does not show every PNG with preview

    Hello there,
    my CS4-BRIGDE doesn't show my PNGs with a preview thumbnail.
    I use to export them from Illustrator files but even if I open them in Fireworks or Photoshop to save them again, there is no preview on my PNGs. The explorer preview shows all PNGs only Bridge does not!
    I have some PNG from an unknown source (too long ago to remember) which do have a preview!
    Can anyone please! help?
    greg

    For a quicker response, I reccommend that you post your query on the Bridge forum: http://forums.adobe.com/community/bridge

  • White Balance Metadata not showing in Adobe Bridge CS6

    Hi there, I am running Bridge CS6 on a Mac, and use Canon 5D and 5DMark 111 cameras. I have an issue with Bridge which I can not seem to figure out. Whether I shoot Raw or JPG and I am trying to do some testing for white balance, once I open the images in Bridge, in the little icon panel just below the folders/favourites panel etc I can see the f stop info, speed, metering , ISO etc, but the only icons I get for WB are if use auto - then I see AUTO.  But when I do a manual WB like 'cloudy', 'tungsten', or 'shade' etc all I get are the symbols for 'Custom" or "Manual".  How do I get the actual symbols for what type of WB i've chosen to show up? 
    I have purged the Cache - both in the individual folder and the overall Cache in preferences.  I have checked that all the boxes are ticked in the preferences panel for the Metadata.  So not sure what else to do.
    Cheers D

    Ok thanks for that, at least I wont be chasing my tail.
    I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

  • Raw images do not show up in Bridge CS4 for PSE 8 for Mac

    I just downloaded PSE 8 for Mac and my raw files no longer show as thumbnails.  I can open them in Elements, but the image is blank in Bridge.  These same images were fine in CS3 (PSE 6 for Mac).  I have downloaded and installed the new Camera Raw 5.6 plug-in but that didn't work.  Any suggestions?  Thank you!

    You have to update bridge separately from PSE, and bridge ships with a pretty old version of ACR. Just go to Help>Updates in bridge and it will update itself for you.

  • Nikon Df Nef File Thumbnails not showing in Adobe Bridge CS5

    HI,
    I am having trouble getting NEF thumbnail to show in Bridge CS5, but only from the Nikon Df. All other, older, NEF files are showing up without a problem
    I have installed the latest updates (Camera Raw etc)
    I would appreciate any advice on getting this to happen.
    Thanks
    BD

    Ok thanks for that, at least I wont be chasing my tail.
    I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

  • Why are my Indesign files not showing up in Bridge

    I downloaded CC 2014 at the same time as transferring my files to a new computer.  Now on Bridge, the only files showing up are jpgs and pdfs.  Any idea how to integrate the indesign and photoshop into Bridge?

    Firstly, you're using <audio> which is a HTML5 tag, but your doctype shows XHTML1. Change this:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    to this:
    <!DOCTYPE html>
    Browsers go to quirks mode when they see a major doctype conflict such as this one.
    Secondly, HTML5 Audio is not fully supported/ native in some browsers - especially older ones. You can consider using a 3rd party HTML5 player such as http://mediaelementjs.com/ because they usually have a fallback mechanism to ensure your file works on older browsers.
    Another observation: There is no space between 2 attributes in your code.
        <source src="music/Commercial Demo.wav"type="audio/wav"/>
    Should ideally be like this:
        <source src="music/Commercial Demo.wav" type="audio/wav"/>
    Note the space between src and type.

  • Adjustments made in LR 2.1 are not Showing up in Bridge CS4

    I thought that I had read somewhere that LR2 and Bridge CS4 were aware of each other and photo settings made using one application would be seen by the other. I can tell you that CS4 is not reading ratings, color labels, and ACR settings made using LR. I guess that I was wrong about any integration between Bridge CS4 and LR2?

    Paul and Greg, thank you for your insightful posts! This makes sense.
    Jeff, I think that you have already shown your true colors, But if you want to make me feel 2 inches tall, go ahead and try. I reserve embarrassment from those people who I hold some respect for. You are not deserving of any respect because you obviously knew what Paul and Greg shared without trying to be sarcastic and yet withheld it just to teach me a lesson about how superior that you think that you are. Then you try to hide behind just being humorous. I don't buy it. If you had told me what Paul did, then made the comment about "reading minds", I would agree that this was innocent humor. But you withheld the useful information and thus your apparent attempt at humor (after the fact) came access as sarcasm, given the lack of help it provided. I can only conclude that you are the one who is flailing about and I have no need for this kind of help.

  • Watermarks Not Showing On Large Web Previews Lightroom 3.0

    Is anyone having success in getting a watermark to show up on the larger preview image when creating a web page in the Web module? Even though my photos all have specific metadata attached and it is synched with LR it does not transfer over to the larger preview even though I have the Watermark setting checked in the Output options.

    You have an incorrectly calibrated monitor or a corrupt monitor calibration. Re calibrate your monitor.

Maybe you are looking for