ACR Dialog Box not fully visible issue CS6

I've got an issue with the ACR Dialog Box in PhotoshopCS6 when opening RAW files.
The names various parameters (Temperature, Tint, Exposure, Blacks, Contrast etc.) are not visible, however you can see the sliders.
It looks like a graphics issue as the background is black, but you cannot aee any text save for that in the WB dropdown.
I've Googled this but not found any similar issues. It's very odd. Deleting the preferences hasn't made a difference, neither has a fresh install.
See screen grab below
Any suggestions welcome!
Thanks

Thanks people for your swift solution. I did look in the forums as well as in search engines, but didn't find these posts.
I'll reinstall (or overwrite) the OS.
FYI I'm on 10.8.4 on a Mac and do have MacKeeper, so there must be something in it.... grrrr
Like people say it doesn't effects the 'normal' PS menus/screens, but does the ACR and I just checked the SAVE FOR WEB, and that too has the same issue.... (ACR 8.1 - PS 13)
Hopefully someone clever will actually work out what it is that's being lost or corrupted.
Thanks again!

Similar Messages

Field's content is not fully visible in Sap Transaction iview

Hello Friends,
                I have deployed a Sap Transaction iview on my portal. I am facing a issue. When i do F4 help on a field, the content of columns is not fully visible in the opened up popup window.
    Is there any way to adjust the colum width, so that it accomodates the whole content and doesn't truncate it ?
    please help !
Regards,
Vidit

Hi Vidit,
Try to check your Transaction iview directly from the browser / through services not through the EP. If the iview is not working fine then thre is a problem in the code otherwise it has to work
Check your code and try to redeploy
Regards,
sreedhar G

Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

In combobox 'g' is getting cut off, 'g' is not fully visible

Hi Flex people,
I am facing problem in combobox, I have the items : 'moon' , 'manager' , 'marketing' in the combobox.
The text 'moon' is fully visible, but the in text 'manager' , 'g' is cut off, means character 'g' is not fully visible.
Please give solution to how to make the 'g' to visible in the selected item of combobox.
Please find the attached snapshot, that will give clear idea.
Thanks,
Sushant

Try this component:
<?xml version="1.0" encoding="utf-8"?>
<mx:ComboBox xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="init();" updateComplete="adjustComboDropDownWidth();"
    buttonMode="true">
    <mx:Script>
    <![CDATA[
        import mx.controls.List;
         private var _selectedValue:String;
         private var _selectedLable:String;
         private var bSelectedValueSet:Boolean = false;
         private var bDataProviderSet:Boolean = false;
         [Bindable]
            private var myDropdownFactory:ClassFactory;
         // Override committ, this may be called repeatedly
         override protected function commitProperties():void
            // invoke ComboBox version
            super.commitProperties();
            // If value set and have dataProvider
            if (bSelectedValueSet && bDataProviderSet)
               // Set flag to false so code won't be called until selectedValue is set again
               bSelectedValueSet=false;
               // Loop through dataProvider
               for (var i:int=0;i<this.dataProvider.length;i++)
                  // Get this item's data
                  var item:String = this.dataProvider[i].data;
                  // Check if is selectedValue
                  if(item == _selectedValue)
                     // Yes, set selectedIndex
                     this.selectedIndex = i;
                     break;
         // Trap dataProvider being set
         override public function set dataProvider(o:Object):void
            // invoke ComboBox version
            super.dataProvider = o;
            // This may get called before dataProvider is set, so make sure not null and has entries
            if (o!=null && o.length)
               // Got it, set flag
               bDataProviderSet = true;
         // set for selectedValue
         public function set selectedValue(s:String):void
            // Set flag
            bSelectedValueSet = true;
            // Save value
            _selectedValue = s;
            // Invalidate to force commit
            invalidateProperties();
          * @author       : Prashant Shelke.
          * @date         : 17/10/07
          * @method name : init()
          * @i/p params : -
          * @return            : void
          * @description : To show tool-tip on line items objects of combobox.
          public function init():void
                myDropdownFactory         = new ClassFactory(List);
                myDropdownFactory.properties = {showDataTips:true, dataTipFunction:myDataTipFunction}
                this.dropdownFactory    = myDropdownFactory;
             private function myDataTipFunction(value:Object):String
                return (value.label);
           * @author       : Prashant Shelke.
          * @date         : 17/10/07
          * @method name : adjustComboDropDownWidth()
          * @i/p params : ComboBox
          * @return         : Number
          * @description : computes dropdown width according to what dataprovider provided to it.
          private function adjustComboDropDownWidth():void
                  this.dropdownWidth    = calculateCustomPreferredSizeFromData();
          * @author       : Prashant Shelke.
          * @date         : 16/10/07
          * @method name : calculateCustomPreferredSizeFromData()
          * @i/p params : -
          * @return            : Number
          * @description : computes dropdown width according to what dataprovider provided to it.
          public function calculateCustomPreferredSizeFromData():Number
                var dropDownWidth:Number    = this.calculatePreferredSizeFromData(this.dataProvider.length).width+14;
                if(dropDownWidth > this.width)
                    return dropDownWidth;
                else
                    return this.width;
      ]]>
   </mx:Script>
</mx:ComboBox>

Dialog box "not enough stoage" appeared on

dialog box "not enough stoage" appeared on iPad; this iPad cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings...my choices are "close" and "settings"...neither works...help?!

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. Then use this guide to manage and free up storage space in your account: http://support.apple.com/kb/ht4847.

CS6 Save/Save As dialog boxes not appearing

I recently installed CS6 Master Collection (educational version, if that's relevent) and in many of the programs, I can't save. In Illustrator, Dreamweaver and After Effects, I will get the spinning wheel for a moment and then nothing happens. In Photoshop, I will get the wheel for awhile before a message pops up saying "Could not complete your request because of a program error." This happens whether I use the key command or go through the File drop down menu.
If I try to exit out of the file, I will be prompted to save or don't save, but if I click save, it will just close the window and not actually save the file.
However, I have no issues saving in Indesign or Flash. The print dialog box will also appear in the trouble programs. I also have CS5 on my computer (only ai, indd, and ps) and I can save in these programs without issue.
I am operating on a MacBook Pro version 10.7.5, 2.4 GHz Intel Core i7, 8 GB 1333 MHz DDR3.
Thanks for your help.

I recently installed CS6 Master Collection (educational version, if that's relevent) and in many of the programs, I can't save. In Illustrator, Dreamweaver and After Effects, I will get the spinning wheel for a moment and then nothing happens. In Photoshop, I will get the wheel for awhile before a message pops up saying "Could not complete your request because of a program error." This happens whether I use the key command or go through the File drop down menu.
If I try to exit out of the file, I will be prompted to save or don't save, but if I click save, it will just close the window and not actually save the file.
However, I have no issues saving in Indesign or Flash. The print dialog box will also appear in the trouble programs. I also have CS5 on my computer (only ai, indd, and ps) and I can save in these programs without issue.
I am operating on a MacBook Pro version 10.7.5, 2.4 GHz Intel Core i7, 8 GB 1333 MHz DDR3.
Thanks for your help.

ITunes 12: Buttons missing in dialog boxes (not visible)

Hello.
Since using iTunes 12 (in my case: German version) buttons like YES/NO or OK/CANCEL are not shown in smaller dialog boxes when iTunes wants to interact with the user and asks question whether to do this or to do that.
The buttons are just not visible, the boxes are too small and they cannot be resized (= fixed size). I think this could be due to longer German texts in the dialog boxes compared to the English language version.
The buttons are there but cannot be seen or clicked.
Screen resolution is 1920x1200 and text zoom factor is 100% in Windows 7. Window size for these dialog boxes seems to be hard-corded and due to line breaks and longer texts in German the YES/NO buttons seem to get an unexpected carriage return moving the buttons out of the visible area.
Please fix this!
Kind regards,
Argentinos

Example: here a part of the buttons is visible but in many dialog boxes they are completely cut off.

Return results from custom dialog box not visibly updating field value

I have a form with custom dialog boxes (execDialog) for data entry. The dialog box is being called from the Entry event successfully. I also have it called from the Click event. So, here's what I get:
1. On entering the field, I get the dialog box pop up, I select a value, it visibly changes the field raw value and leaves focus in the field.
2. If I exit the field and re-enter, it also works as in point 1 (as expected)
3. If, while focus is already in the field, I click in the field, I get the dialog box, as expected, but after selecting a value from the dialog, the field raw value DOES NOT VISIBLY change until I exit the field! It's kind of like the click event is working in conjunction with the Exit event. This is totally counter-intuitive for a production form that is being designed for the general populace.
Anyone had any experience with this?
Cheers,
Marty.

Thom Parker answered this here: http://forums.adobe.com/message/2614570#2614570
Answer copied below:
"The problem is that when the focus is on the text box
it's in edit mode. It's only displaying the value interactively entered by
the user, or as a consequence of the change event. What you need to do is
force the focus off of the text box in code. You can do a little trick
where you bounce it to a tiny transparent field, which then bounds the focus
back so it doesn't look like the focus changed."
What I ended up doing was calling up the dialog box, then using setfocus with no parameters to remove focus from the field, as follows:
this.rawValue = this.dialogBoxFunction(this.rawValue); // passing current value so dialog box defaults to that value
xfa.host.setFocus();
Cheers,
Marty.

Dialog Box not visible

Hello All,
I've a problem in Java Swing Application
My main Window opens up a child window (dialog box).
However, when I switch from my Java Application to another application and back again - the dialog box does not appear. Instead the main window is shown on the screen.
It's only after pressing ALT+TAB on my Java Swing Application, the dialog box appears.
This is problematic b'cause the dialog box is "modal" and if it does not appear first, I cannot do anything with the main window.
Is there a way to correct this?
Thanks in advance
-- Sunil
Ps: I'm creating the Swing GUI in Windows Xp

Hello Franck,
Thanks for your suggestion!
I did find the problem by tracing it to the bug database:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=5063142
It seems that if you pass the "this" instance (of JFrame) directly to JDialog, the problem occurs.
However, if you pass the object that holds the JFrame instance, like you've mentioned above, the problem goes away.
I am still not satisfied as to how this occurs.
But for now, my immediate problem is resolved.
Thanks again!
Regards,
Sunil D

Flash CS3 - Missing Fonts Alert Dialog box not showing

We seem to have lost the Alert dialog box when Flash CS3 Pro
discovers there are missing fonts in a file. We still get the
warning in the Output box but we get no Alert box to tells us
actually which fonts we need to locate. This is happening
regardless of file so it appears to be Flash issue and not a file
issue.
Anyone come across this before and anyone know how to fix?

You need to make sure that the specific camera model is supported by the version of the ACR plug-in you have installed on your machine.
The current version of ACR (Adobe Camera Raw) is ACR 4.5 and there is also ACR 4.6beta.
What version are you running and what camera generated your raw files?

BPS_WB: Please Wait Dialog Box not Displaying correctly???

When we switched our Planning Interfaces to using the New Planning Interface Design the Please Wiat Dialog Box does not display correctly.
When a Request is fired and the client is waiting for the Response all that shows is a white block in the middle of the screen with no dialog screen or other information.
It maybe associated with the following:
function bpsOpenURLSelf(doIt, url)
      if (doIt) {
        try {
            document.body.style.cursor = "wait"; // works only in IE
        } catch (ex) {} // ignore
        open(url,'_self');
      // note: function with doIt==false is used to check
      //       existence of the opener window
Or it may be associated with a CSS issue?
I am currently using IE 6.0.2900.2180.
Any thoughts would be appreciated!
Thanks, ATC

Hi Alan,
please implement SAP note 845305.
Regards
Marc
SAP NetWeaver RIG

Open/save dialog boxes not working correctly.

Environment: CS6 (PS 13.0.1) Mac OS X 10.7.5. Plenty of hardware. (Generally starting with .CR2 RAW.)
Two open/save problems
Recently (maybe since the 13.0.1 update??), I have been having problems with the open and save as dialog boxes.
First. The open file dialog always defaults to Enable: blank (i.e. no file types enabled). Each time I have to go to the bottom of the dropdown list and select "All readable documents" before I can open ANY type of file. I've searched in everyway I can think of looking for some method to have OPEN default to "all readable" but can't find anyway to do this. Anyone have a suggestion? I admit this is a nuisance more than anything, but when whipping around at deadline having to stop each time and make this change is irritating. No other program has this difficulty (including Illustrator and InDesign). PS5.5 did not exhibit this behavior on the same machine.
Second. When I save as and try to select any file format, say going from psd to tiff, the format dropdown list ALWAYS selects the format ABOVE the one I choose. Example: If I select JPEG, PS tries to save as .iff. If I pull the selection down to JPEG2000 it will then save as standard JPEG. Again just an irritant but, tiff (which I need for several other programs) is last on the list thus there is no way I can go one below it to get tiff format selected. It always comes out as png. Also note that the Format selection indicates the correct format - in the case of tiff the dialog box shows TIFF selected, but the program is apending .png. (Continuing the save as (without altering my selection) always results in the incorrect format no matter what the Format dialog says in the save as operation.) Again, no other program I work with (including several Adobe products) exhibits this behavior.
I seriously need to be able to save as tiff. Anyone with any thoughts on this?
Thanks much,
Robert

I appreciate all responses particularly from an "Official Adobe" human being!
Unfortunately, a significant amount of effort has been expended with no joy here.
I have done the following;
(1) examined every plug-in folder for duplicates - None found
(2) deleted the symlinks (aliases) Topaz created referencing their plug-ins in /Library/Application Support
(3) reinstalled the Topaz bundle - no change
(4) Spoke at length with Topaz support and have been assured that all of their plug-ins are CS6 compatible.
(5) Have had the same conversation with Nik regarding their 2 plug-ins - assured that they are compatible.
Frankly I'm stumped here. I've combed my system in everyway I can without any change in PS behavior - on Open it defaults to blank and "Save as" selects the wrong format.
Question for the experts. Would deleting PS completely and then reinstalling make a difference or am I now in uncharted territory and on my own?
Thanks for all assistance,
Robert
Still need to save as TIFF but can't seem to get there.

Camera Raw Dialog box not opening automatically

When I try to open a raw image in photoshop CS3 for some reason the camera raw plugin dialog box is not automatically opening and I get a message that says "Could not complete your request because Photoshop does not recognize this type of file" I know I am missing something simple but how do i get the dialog box to open?

You need to make sure that the specific camera model is supported by the version of the ACR plug-in you have installed on your machine.
The current version of ACR (Adobe Camera Raw) is ACR 4.5 and there is also ACR 4.6beta.
What version are you running and what camera generated your raw files?

ICloud and Open Dialog boxes not working

I originally posted a question at Open Dialog boxes have disappeared without results. I have some more information now.
The problem: Open Dialog boxes do not work - they don't show up at all - for apps supported by iCloud. Apps that don't use iCloud work fine.
I've now figured out that the Open Dialog boxes will reappear if I uncheck Documents and Data in the iCloud preferences pane. If I recheck it, then the Open Dialogs for all synced apps stop working. I am unable to correlate when this behavior started to any particular event on my Mac (that is not to say there is not a correlation - I simply can't find one). I have done file permission repairs, deleted com plists and even reinstalled Mountain Lion 10.8.2, all with no change in the behavior. The results of checking/unchecking the Documents and Data box are instant. I can have an app like Preview open or closed, or restart the computer. It does not matter. Checked = no Open Dialog; Unchecked = get Open Dialog (without iCloud option of course).

I appreciate all responses particularly from an "Official Adobe" human being!
Unfortunately, a significant amount of effort has been expended with no joy here.
I have done the following;
(1) examined every plug-in folder for duplicates - None found
(2) deleted the symlinks (aliases) Topaz created referencing their plug-ins in /Library/Application Support
(3) reinstalled the Topaz bundle - no change
(4) Spoke at length with Topaz support and have been assured that all of their plug-ins are CS6 compatible.
(5) Have had the same conversation with Nik regarding their 2 plug-ins - assured that they are compatible.
Frankly I'm stumped here. I've combed my system in everyway I can without any change in PS behavior - on Open it defaults to blank and "Save as" selects the wrong format.
Question for the experts. Would deleting PS completely and then reinstalling make a difference or am I now in uncharted territory and on my own?
Thanks for all assistance,
Robert
Still need to save as TIFF but can't seem to get there.

Swatch Option Dialog Box Not Displaying Properly

Whenever I open a Swatch Options Dialog box the Pantone preset colors overlay on the slider bars so that I cannot access the slider bars.
I've posted a screenshot of what I'm talking about at www.cranstoninc.com/screenshot.jpg
I tried trashing the com.adobe.indesign.plist file to resolve the issue but that didn't help.
Any ideas on how to resolve this would be appreciated.

I found the answer in another post by nread so I am posting his solution here as well.
I went into my Configure plug-ins, disabled the swatches plugin and its dependancies (created a new plugins set config), then quit and restarted InDesign. After that, I re-enabled all the plugins I disabled (by reloading the default configuration) and restarted InDesign again. Now my swatches work perfectly!
This worked for me as well.

ACR Dialog Box not fully visible issue CS6

Similar Messages

Maybe you are looking for