ACR does not see D70 in Camera calibrate profiles

I shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
We are using PhotoShop CS4 on 64 bit and 32 bit systems with ACR 5.2. Bothe the 32 bit and 64 bit Photoshop have the same result.
Thanks, Dennis Edson

You installation is working correctly. ALL the profiles (including the "standard" ones) you see are for just your current camera model.
The "D2X" in some of the profile names are part of the name of the Nikon picture style they emulate.

Similar Messages

PowerBook G4 does not see optical drive in System Profiler

I have a very strange situation in a powerbook G4 (1.67ghz, hi-res 15" screen).
I bought the laptop non-working, installed a new power board (plug on old one was fried!) Installed a 250gb HD which I had installed OSX on in another G4 laptop, and it booted up fine, or so I thought.
When I put in my Leopard install DVD to install over the existing 10.4 Tiger, the disc spun up, but would not mount - would not eject - and when I checked the System Profiler the superdrive was not recognized by the powerbook as being present on the ATA bus. The hard drive, of course, was seen on the ATA bus.
I thought the superdrive was bum, so I installed a known-working combo drive I had around from a previously parted laptop (Apple branded) and experienced EXACTLY the same situation.
Other things I have tried included using jumpers to manually set the hard drive to slave and cable select (from the factory, with no jumpers, it is set to master), thinking that perhaps the optical drive was somehow seen as master or cable select. All possible jumper settings I tried made no difference.
Booting from external firewire hard drive shows exactly the same situation on the ATA bus, EXCEPT (and this is where it gets just weird enough to pique my curiosity and keep me trying to fix it) - When I boot from the external drive WITHOUT AN INTERNAL DRIVE installed, the SUPERDRIVE SHOWS UP ON THE ATA BUS of the System Profiler! I have not yet seen both at the same time, but I can get one or the other to show, depending on, apparently, the presence of the internal hard drive.
Am I missing something here, or am I to assume a fault in the IDE controller of the logic board?
I have never seen this laptop working properly, but the seller I acquired it from stated that the optical drive worked fine until he fried the DC in-board, presumably with a faulty power supply. He had removed his hard drive to save the data on it.
Thanks for any help or clues that anyone might provide.
See another post with similar situation (archived, or I would have jumped on that thread):
http://discussions.apple.com/thread.jspa?threadID=1862129&tstart=0
Ray

Well, I am happy to report that the situation is resolved with my powerbook not seeing the superdrive, but I still do not really understand exactly why it was unavailable in the system profiler as I originally posted.
My particular solution was to wipe out (erase) the hard drive, zapped PMU, zapped PRAM, did the reset-nvram in open firmware, rechecked to make CERTAIN the proper cables were installed properly, and Now I just completed a fresh install of Leopard from the previously recalcitrant superdrive, to the now-clean hard drive.
My BEST GUESS as to what was wrong with the situation from the outset may have had something to do with where the hard drive came from and how that operating system was installed. (the OS was on the HD when I installed it) In hindsight, perhaps doing all the resets, as well as repairing permissions MIGHT have done it, but I got caught up in thinking it might be cables or something.
So, I would advise others with a similar problem to:
repair the hard drive
repair permissions on the hard drive
reset PMU
reset PRAM
boot to open firmware (hold command-option-o-f at boot) and type "reset-nvram" (without quotes) enter, the type "set-default" enter, then type "reset-all" enter
cross your fingers, knock on wood, and boot! See what happens....
if no glory, THEN look at cables (make certain they are the CORRECT cables and that they are seated properly) I bought a hard drive cable and an optical cable from ebay sellers with assurance that they were the proper cables, and NEITHER had the same part number as the original cable which I suspected faulty, and that in the end are actually GOOD! GO BY PART NUMBERS! do not accept someone elses assurance that their cable is the proper one!
then suspect faulty optical drive - if possible swap another drive in and check.
if a second optical fails, then SUSPECT logicboard, but before you invest in a new logic board ($$$$$) try putting a freshly erased HD in and just see if that helps.
good luck to you all with your mac troubleshooting!
and thanks to all who read and pondered....
I will mark this case "answered" though it is more closed than truly answered.
I am very relieved that the fault did not lie in any of the major components (or even the minor ones for that matter)
It turned out to be only software/installation/settings, even though the symptoms certainly seemed to point to a hardware issue. It pays to try the resets and repairs!
Ray

Camera Raw camera profiles does not see D70

I shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
Thaks, Dennis Edson

Hi Dennis,
This is better asked in the CR forum:
http://www.adobeforums.com/webx?13@@.3bb6a85c
I believe the reason for seeing the D2X label is because that is the same label Nikon uses for all it's models. But it would be best to confirm over there.
cheers!

IMac does not see Nikon D300 camera as drive in finder

Please help. I bought this iMac for processing and printing my photography. In Windows 7 I can just plug my camera into the usb port and it sees the camera and the folder containing the photos I want to download onto the hard drive. I do the same thing on the iMac and I don't see the camera or folder anywhere. The LED on the camera flashes as if something is being read, but nothing pops up on the desktop or the finder window. What am I missing? Thanks for any help.

Have you checked your Finder Preferences (General tab) that external disks, etc are all checked to show on desktop? Also, have you checked your iPhoto Preferences to see what the setting is for "connecting camera opens..."? And, lastly, have you simply tried to use a card reader with your camera card? That is what I do; I simply want the card icon to show on my desktop; this method also saves the camera's batteries. Some camera brands do present a few problems (my Canon does) - the easy workaround is using a card reader.

Capture / FCP does not see camera

I just upgraded to Final Cut Pro 4.0 from Final Cut Express 2.0. and Upgraded to Tiger. The program does not see my camera attached via firewire, though it is seen in system settings. The program crashes when I chose file/capture. I deleted preferences and capture still won't work. Any ideas?
Dual 1.42 GHz PowerPC G4 Mac OS X (10.4) 2 GB DDR SDRAM

You can't just upgrade to QT7 for some reason..you have to do some other trickery to get it to recognize your camera.
Again, found by simple search:
1. Navigate to Library -> Receipts on your main drive (not from your personal folder).
2. Remove all files of the form QuickTime*.pkg, where "*" is a version number. E.g. QuickTime600.pkg, QuickTime650.pkg, Quicktime700.pkg and QuickTime701.pkg. This simply tells your system that those packages are not installed.
3. Go to http://www.apple.com/quicktime/downloads and click on the "download Quicktime" link. DO NOT USE THE AUTOMATIC UPDATE UTILITY. Download QuickTimeInstallerX.dmg. Double click this file (probably on your desktop) and then invoke the installer by double clicking QuickTime701.pkg.
4. After your computer reboots, you should be able to restart FCE and see your camera.

HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

Skype does not see camera

Skype does not see the camera any more. I think it was working before - camera works fine with facetime, etc.
I installed recently ESET - could that be it?
Any help greatly appreciated. Fedele

Fedele1965 wrote: ...I may as well use facetime ...
Understood. That is what i do whenever I can. In fact, I always use Apple apps if they can do the job.
BTW, after I posted, it seems that the workaround link I cited may have been edited or modified.
If you decide to try to get Skype working again now, corrected workaround info is available here: http://discussions.apple.com/message/22984254#22984254
Message was edited by: EZ Jim
Mac OSX 10.8.4

Why does Lightroom not see my teathered camera in Windows 8?

When I teather my Nikon D300 in Lightroom 4, It seem as the Windows 8 operating systems takes over the function and Lightroom does not automatically open captured image. Instead, Windows' picture window appears. I have not been able to figure out how to override the windows function so that Lightroom opens the captured image. Need Help!!!

Where is that in the menu...couldn't locate it?
Sent via the Samsung Galaxy S™III, an AT&T 4G LTE smartphonessprengel <[email protected]> wrote:Re: Why does Lightroom not see my teathered camera in Windows 8?
created by ssprengel in Photoshop Lightroom - View the full discussion
Also make sure you have your camera set to Point-to-Point not Mass-Storage mode:
Menu/Wrench/USB/'M/P'
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5226836#5226836
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5226836#5226836
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5226836#5226836. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

IPhoto does not see my camera

iPhoto '09 did see my new Panasonic camera at first, and I could import the images and videos without any issues.
Now - a day later - there is some images and movies on my camera's SDHC card, and it does not see the camera at all. I do see the camera card in the finder. So the card is readable. It is just that all of sudden iPhoto does not see it anymore. I tried hence and forth restarting iPhoto and camera but no luck.
The only thing I did in between was loading of a bunch of images from my camera card (via Camera Connector Kit) to my iPad 3. And removing the images (the iPad 3 does not seem to recognize the videos - which is another issue...) via the Photo app on iPad. I then wanted to load the videos (and some new images I tookl direcfly to iPhoto on my iMac. But htat now does not seem to work.
Any tips are much appreciated!

Try these:
1) Go to Disk Utilities and repair permission -- see if it works. If not go to #2
2) If that doesn't work d/l a program call OnyX. Make sure you get the the specific version for the version of OS X you are running. Run the program and go to Maintenance and run all three options Permissions (reset home directory checked), Scripts (run all, but don't delete logs), and rebuild (check LaunchServices and dyld's shared cache). Then go to Cleaning. In System check Kernal and Extentions and Other components. In User make sure at least Applications and Temporary items are checked. You can check the others if you want - no harm will come, just more time. You will be asked to restart your computer each time, but ignore until you have reached this point. When you have done all of the above reboot
Test again. Your camera shoud show up.

I am trying to import i frame from an SD90 video camera to iMovie, but it does not see the camera. Footage goes to i photo Why?

I am trying to import video ( i frame) from an sd90 ( listed for mac) but i movie does not see the camera. It imports into i photo. Is this normal ?

If you quit iPhoto and iMovie (with the camera still attached) then put the camera into VCR playback mode. Then launch iMovie and see if it can see the camera. If not, get out the power adapter for the camera and plug it into the wall, plug the camera into the power adapter. Reboot your Mac and wait for iPhoto to launch again automatically. Don't let it import the clips, just say No, quit the program. Then put the camrea int VCR/Playback mode, launch iMovie and check again to see if it can see the camera. Once iMovie sees it the first time it should be quicker to recognize it in future. But iPhoto does try to race in there and grab everything first.
To turn this off go to iPhoto Menu in iPhoto > Preferences > Look for Connecting camera opens: (click on the pulldown menu and choose No Application) This effectively turns off iPhoto when you first attach the camera. And it opens the way to iMovie recognizing it quicker.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!

If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.

I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341

IPhoto does not see the camera

iPhoto does not see the camera, although it worked really well for two years. Computer has been regularly updated. Please help, thank You.

Image Capture doesn't see the camera. I have tried with two different Sony cameras, that I have been using for a long time on this computer. It is iMac 27''. Both of these cameras work normaly in MacBook Air, that means that the problem is not in the camera, or the cards. Those are the things I have tried so far. Only difference I created on the computer is that I have, two or three days ago, installed external hard drive WD My Book Studio which is connected to the computer by FireWire 800.

Capture mode does not see external camera

When I use the capture in iMovie, it only allows you to choose the built in iSight camera, and the external web cam is long listed as a choice. The external works fine in other programs (like skype).
Is iMovie intentionally crippled to only work with iSight in capture mode? Or am I doing something wrong?
THanks
bob

Thanks for your help...
It is a Logitech Quickcam Pro 9000 using drivers from mac.
It does show up in USB section under apple system profiler.
It is connected through a powered hub (I have tried it directly connected with no difference).
It is recognized fine in other programs, such as Skype (you can change from isight to external web cam).
I downloaded and installed iGlasses 2, but that did not solve the problem. Curiously, if memory serves me correctly, photobooth only works with isight internal, but after iGlasses 2 install, it works (only) with external (when external is available).
Any other ideas on why iMovie does not see the external web cam?
bob

After upgrading to Mavericks my iMac does not see Sony camcorder in iMovie anymore. It still works on MacBook, so nothing wrong with camera or connections.

After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
Anybody with the same problem or a solution?
Thanks mbkom

Try this

ACR does not see D70 in Camera calibrate profiles

Similar Messages

Maybe you are looking for