ACR not saving after "done" and no changes reflected in Bridge.

Am using CS5 and ACR 6.x (newest) on iMac (10.6.8)
Within the past couple of days I've encountered an issue when in ACR. I edit my raw file then press "done" to save my changes (in xmp).
Then going back to Bridge the symbols no longer pop up indicating any changes and going back in to bridge it is as if nothing has changed.
In Finder I can see I have an xmp sidecar.
This just began occurring with the last two cards I uploaded.
I use Nikon Transfer to upload from CF card.
To the best of my knowledge I made no changes immediately proir to this occuring.
After this first happened downloaded te latest updates to ACR.
It does not seem to mater if I have Generate High Quality Thumbnail set or not.
Any idea if I have a setting askew.
Thanks
Bob

Well, I think I found the problem. It was a setting in Bridge that I must have unset. In switching from Filmstrip to Metadata views and back I must have accidentally switched from "High Quality on Demand" to "Prefer Embeddd (Faster)"
When I discovered this and switched back it resolved the problem.
Scary as I do a lot of work in ACR and Bridge

Similar Messages

Photos not saved after sharpening and denoising-shows on screen correctly but when am trying to email it, does not reflect the changes?

I have tried to change pic's like sharpen and de-noise features, on screen ot shows all perfect, but when I try to email them, all the changes are lost, anyone can help with the same?
Thanks in advance.

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

HT4489 Ever since the last update IOS5.1.1, calendar entries are not saved on Icloud, and would not sync on all I clould devices

After the last update of IOS5.1.1, all caledar entries are not saved on Icloud and thus not synced on all my Icloud devices, even though, spreadsheets are synced, photostream is working and contacts is syncing, only calendar items. Anybody has the same problem? Or a solution to this kind or problem?

Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Iphone 3gs will not activate after restore and update

my sons iphone 3gs will not activate after restore and ios update.
phone keeps saying no service but worked fine before restore and update any ideas ? thanks

Sorry. The jailbreak is undoubtedly the root cause of your problem.
It is not always possible to repair the damage done by jailbreaking.
Try searching google for an answer, but be prepared to just buy a new phone.

[svn] 3752: Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.

Revision: 3752
Author: [email protected]
Date: 2008-10-20 12:41:06 -0700 (Mon, 20 Oct 2008)
Log Message:
Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.
QA: Yes
Doc: No
Checkintests: Pass
Details: Merged change 3676 from trunk.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-195
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
width: 220px;
left: 180px;

CS6 photoshop not found after downloading and putting in serial number

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
Thanks!

Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
Please please help me!

Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
Thanks!

check your duplicate post. there are two responses.

HT201263 iphone 3gs will not activate after restore and update?

Please help my iphone 3 gs will not activate after restore and update.

If it is locked to any carrier, insert SIM from the carrier. If it is unlocked insert any SIM to activate.

Hierarchy Data not saved after Hierarchy Load

Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
Abhishek

Abhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks

Cp4 - not saving after importing slides

I imported sldes from another Captivate 4 project only to discover that all changes I made after the import weren't saved. I selected Save but the asterisk in the project title window didn't appear. I tried quitting Captivate to force a save. The dialogue asking me to save appeared - I clicked Save and Captivate just sat there. I had to use Task Manager to quit the application and, when I reopened my file, the imported slides and the changes I made after importing were gone.
So importing slides is one more feature that doesn't appear to work.
I'm at the end of my first week working with Captivate 4 and I'm not impressed. The new features look promising but were they bought at the expense of older features that no longer work?
Grace

I imported sldes from another Captivate 4 project only to discover that all changes I made after the import weren't saved. I selected Save but the asterisk in the project title window didn't appear. I tried quitting Captivate to force a save. The dialogue asking me to save appeared - I clicked Save and Captivate just sat there. I had to use Task Manager to quit the application and, when I reopened my file, the imported slides and the changes I made after importing were gone.
So importing slides is one more feature that doesn't appear to work.
I'm at the end of my first week working with Captivate 4 and I'm not impressed. The new features look promising but were they bought at the expense of older features that no longer work?
Grace

Desktop setting not saving after system update

Hi All,
I did a system wide update including the changing the kernel from 2.6.25 to 2.6.28 and now I cannot change my desktop setting.
that is, my desktop background picture and font size is not saving. First I could not shutdown and i read the forum where
it was suggested to downgrade from hal-0.5.11-7 to hal-0.5.11-4. and that work for me. but my system
not saving my desktop setting. I have the "automatically save session on logout" check.
I am using xfce4 as my DM
any help please.

hi,
check your home folder permissions. open up your /home/ right click on your username folder click properties and in permissions dialog check that owner can view/edit files and then check something like apply to all subfolders and files

Finder not responding after Archive and install

I recently encountered my first problem ever with my mac(new in '05) This is the first mac I have owned; I have worked on G3's and G4's in the past. After reading through many message boards and support pages I don't believe my problem to be similar but different to previous posts.
My problem started off with an OS problem that I was able to diagnose in the "help" book I purchased when Leopard came out. It said I should Archive and Install to remedy the problem and keep my files. I ran the archive the install (it gave me no options to preserve user or network settings). After Archive and install my computer started up alright, but I got the permanent beachball and the finder does not work. it is constantly non responsive. I can relaunch finder, but after it restarts it goes non responsive immediately once again. So I can't actually access my "previous system" folder to move anything over. I checked my dock items and finder, they opened, but my itunes asked for an update. I list of update items came up; I did the non-restart items first. they updated fine, (my itunes old itunes playlists are viewable but not playable now) then I did the items that required a restart. That is when I found out that I could not shut down or restart my computer with std. procedures.
Currently I can only access my spotlight or apple pull down menu if I am in a functioning dock program (safari or itunes, quicktime. etc.) after reading some more support pages it looked like the common thing to do was check permissions and verify disk. I did, I repaired two permissions and the disk was OK. I did look at the HD files, they were as I remembered, but unaccessible (greyed out) and the "previous system" folder was present. +It didn't look like I would expect. The HD looked same as it used to just with a previous system folder.+ After checking the permissions and verified the disk I tried a hard restart. It came back the same as before, unresponsive finder and only the few dock items worked along with spotlight. I checked permissions and disk verify again and everything was OK.
Sorry to be long winded I am trying to be thorough...In short, My finder does not work after doing an Archive and Install to fix my original problem (which has been fixed)...the remedy for an unresponsive finder is to do an archive and install. Is another archive and install really going to fix my problem? Can I archive and install OSX 10.4 and work my way back up to 10.5.6?
Secondly is there a way to restart my computer without doing another hard restart?

It won't let me add a new account. I am locked out and when I try to unlock it gives me the beachball and becomes non responsive after it tries to authenticate.
I looked at the log file, I am not sure what exactly to look for. I am no programer. I see an awful lot of negative wording. I see some errors like "error (-4956) locating menu extra but they are mostly under system preferences...I see some stuff in the loginwindow that says is not a full path... Otherwise, the only reference I see to the finder is when I have force quit the finder.
2/8/09 8:59:55 PM com.apple.launchd[114] ([0x0-0x4d04d].com.apple.finder[304]) Exited: Terminated
2/8/09 11:10:17 PM com.apple.launchd[114] ([0x0-0x57057].com.apple.finder[321]) Exited: Terminated

AP workflow comments not saved after posting

dear
Ive posted it in controlling forum, but it had to be rather here.
I
when i check SAP AP workflow document overview id like to see comments entered by accountant as the reason for document parking. as soon as the document gets posted i see the approval and coding workflow path but comments are not saved any longer. do you know what might be a reason for that? why it happens? maybe it is related to specific settings for workflow?
workflow log for the posted docs is neither showing this information.
your advice much appreciated.
thank you very much!
regards
els

thank you for trying to help me.
Well, it looks this way: invoice is parked as PO document via workflow and send for approval - for different reasons (price difference, no GR, any PO found etc). Accountant while parking enters comment - to inform approver about the issue.
Sometimes the invoices bounces back already coded and ready for posting, sometimes is rejected - then we have 2nd comment as the reason for rejection. When finally invoice is ready for posting and is posted - these all comments (for parking, for posting) are disappearing. They are not saved in workflow overview history.
The posting might be done manually via workflow, automatically, or via tcode to post parked doc. But in anyway - comments are not saved. I am sure its possible to review invoice workflow history (if appicable) and see the issues identified for that invoice (audit purposes for instance). But I dont know how to check what should be set up for the workflow to have all these comments saved in workflow overview history (not long text, not WF log).
When i.e. you enter WF overview history you see name and action (park, reject etc) - when was clicking on that line it was seen below the screen the comment.
Thank you very much for your help!
regards
els

ACR not saving after "done" and no changes reflected in Bridge.

Similar Messages

Maybe you are looking for