ACR Update 6.5 fails to install

I have been trying to install ACR Update 6.5 on my MacBook Pro running 10.6.8 and CS5. I have tried running the updater from Photoshop and downloading the update and installing it and I get the same error every time.
Photoshop Camer Raw 6.5 Update
There was an error installing this update. Please quit and try again later.
The 3.5 upate for Lightroom installed without an issue.
Any ideas?
Thanks,
Doug

Go to the Camera Raw product page and download and install the update manually...Adobe Updater doesn't always do the right thing with regards to Camera Raw.

Similar Messages

Acrobat Updater plug-in fails to install

I'm running Mac OS 10.4.11 on Mac G5 Quad, 6.5GB RAM, and whenever I run the Adobe Updater for my CS3 programs, I get a dialog box that says, "A new version of the Adobe Updater is available for installation. Click OK to install it now.", so I do, and it downloads and starts to mount a dmg or something, then I get an error message, "Adobe Acrobat Updater plug-in failed to install.", so I never know if it updated the rest of the Suite or not, can't find any info about this. Has anyone found the answer to this? Thanks! :)

Hi Meisha,
I have had the same problem for months now and cannot figure out how to solve this. I have seen another discussion with the same topic "Adobe Acrobat updater plug-in failed to install" but am unable to reply to the discussion for some reason. I'm new to using the forum.
Someone in that discussion (Donald Raymond) posted a command, but I don't understand how to effect the command nor how to reach him to ask him to clarify. The discussion link is here:
"http://www.adobeforums.com/webx?128@@.3bc4ba94"
I wish that Adobe would address this issue and give a valid solution. Otherwise, I'm unable to update my CS3 products on Mac OS. I also tried to install a download of a new Adobe update manager, but that didn't solve the issue.
I hope someone can help us!

Symbian Anna update 1/2 failed to install

The story so far. I did the first round Anna update (around 27 mb i think) OTA cos my Ovi Suite never able to update firmware on my n8 since trying to update it to PR 1.2, and I did try reinstalling, redownload, reboot PC, reg clean, ccleaner to fix the Suite but it still do not update my firmware at all. But that's another story.
So I installed the 1st round, n8 rebooted to white screen, rebooted into homesceen with Midnight theme. SW update then shows 4 more items: Anna update 1/2, 2/2, Store and Social. The 1/2 was showing around 20++ mb. So I selected all 4 and update. Halfway through the installing process of 1/2 update (note the download part of 1/2 was very fast), I did plug in the power pin, cos the installation process was damn slow for 1/2. I did not notice wheher it finised installing cos later i checked it was already on 2/2 (downloaded and installing). It then went to the last two items and installed ok.
Rebooted device, but SW update still showed Anna update 1/2 available (the only one left) and the download size is now 7166 kb. I proceed to update it, it failes with error but no error codes or any message what was the error about. I tried again and again, with fresh reboots, still failes. What gives?
Even more, split screen not here. I did the uninstalling Swype, activating qwerty mode in portrait, still no split screen. I do not have any Betalabs apps.
My Quickoffice & Reader is not here anymore (the app manager not showing them too). Heck I bought the full ver of Quickoffice 6 last time. Wat a waste of my money now that ver 7 is out!!
Anyone knows how to delete the "dowloaded cache" of SW updates? I want to force SW update to redownload this 1/2 item to try fix this issue.
Thanks for listening and please help. Cheers!!
Solved!
Go to Solution.

I got the same problem since this morning on both my N8 & just found out solution on a previous update error similar to this & completed the update on one of the N8. Re-trying on another one.
Working Solution for failed update was found on Flashism's website quoted & "touched up" per below:
Big thanks to user “Unick” on Nokia Support Forums, who posted a working solution to the problem, and there are couple of successful installs reported from the solution.
I just deleted folder E:\Private\20019119\. After that I ran SW update on the phone & it restarted download of Symbian Anna Update 1/2 & 2/2 as well as Social, they finished updates successfully.
To delete the mentioned folder, follow these simple steps:
• Connect your Nokia N8/C7 in Mass Storage mode to PC via USB cable
• Locate and delete folder named “20019119″ under \Private folder of Mass Storage
• Unplug the device from PC, and retry again. It should work.
However, I still got no popup split keyboard after completing the updates & restarted the phone.

Security Update 2009-01 Fails to Install

Hey guys,
I've done some searching but haven't found anyone with any issues installing the Security Update 2009-01. Has anyone else had the install fail on them? My install.log shows:
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Starting installation:
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Preparing volume "Macintosh HD" for installation
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Configuring volume "Macintosh HD"
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Preparing disk for local booted install.
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Free space on "Macintosh HD": 165 GB (178036584448 bytes).
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Create temporary directory "/private/tmp/SecUpd2009-001.pkg.278LCZ2ao"
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Running install actions
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Processing SecUpd2009-001:
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Determining files to install
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Utilities/X11.app installed to /Applications/Utilities/X11.app
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Utilities/Podcast Capture.app installed to /Applications/Utilities/Podcast Capture.app
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Preview.app installed to /Applications/Preview.app
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: It took 0.91 seconds to create the install plan for SecUpd2009-001.
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Removing obsolete languages
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: An exception was thrown from the install queue while running IFInstallElement. NSRangeException. * -[NSCFString substringFromIndex:]: Range or index out of bounds.
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Install failed: The Installer encountered an unknown error that failed the install. Contact the software manufacturer for assistance.
Should I be asking here? I'm not sure if I'm eligible to talk to a Apple representative directly.
Thanks all!

I figured it out. I had sym-linked my /System/Library/Frameworks/Python.framework/Versions/2.5 to the macports version of Python. Restoring this back to the original 2.5.1 version fixed the problem.
If anyone else is having issues installing this update, make sure you restore anything you've modified (listed here http://support.apple.com/kb/HT3438) to the stock versions.
Cheers.

ERROR: Update driver data failed (Cannot install any apps)

Error Code Summary
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: Updating driver data failed. Driver entry was notadded. ARP estimated size 0KB
Every time I try to install any form of apps this error pops up.
I’ve un-installed my entire suite due to the fact the desktop application wouldn’t let me update anything, as it claimed nothing was installed. Even when everything was installed.
So, at this point. I’m just sitting here, paying for something I can’t use, with a client waiting for the final product.
I’d appreciate any help I could get.
Thanks.
P.S. Yes, I restarted my system multiple times, used the Creative Cloud cleaner application to clean things up, and every one of the basic troubleshoot methods.

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

SharePoint 2013 March Update Installation Error: Failed to install application content files

Hi,
I've been trying to install SharePoint 2013 March Update. After installing when I ran the configuration wizard, I get the following error:
Task applicationcontent has failed with an unknown exception
Exception: System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
   at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
   at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
   at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Has anyone found the issue?
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

This is very painful situation .I was stuck on this till 2days and did goggling a lot.But didn't get the solution .I tried so many ways but no success .So finally I removed all the config and XML files from the C:\Program Files\Common Files\microsoft shared\Web
Server Extensions\15\CONFIG and run the PSConfig wizard again.This time got success finally .really unexpected.

Boot Camp Update 3.1 fails to install

I'm using a MacBook Pro 2010 and I have installed Windows 7 Ultimate x64 using Boot Camp. I installed with Boot Camp 3.0, and in Windows the Apple Software Update tool wants me to update to 3.1. Three times now I have downloaded, installed, and restarted my computer, and after every time that same tool tells me that I should update to 3.1.
Notes: I am running a with a single user account, which is a password-protected Administrator account. I give the software permission to run, of course.
Possibly related(?): At every startup into Windows, after the OS select and before the Windows load screen, I get a black screen with a single flashing underscore. I am wondering if it is trying, and failing, to apply the remainder of the 3.1 patch? Any other ideas? The black screen lasts for approximately 15 to 20 seconds before Windows continues to load.

I have the same problem. Could you help me?
Thanks.

Asset Intelligence Update Service Point fails to install

Hi,
I have one SCCM 2012 sp1 cu2 primary site running on Windows 2008 R2, and a separate SQL 2008 R2 database runnining in a cluster.
I installed the Asset Intelligence Service point using the default settings, but the component is critical.
When I look in AIUSMSI.log it tells me I do not have permissions to configure services - I am a local administrator on the primary server though and I can manuall stop and start services - error is:
Product: Asset Intelligence Update Service Point -- Error 1920. Service 'AI_Upate_Service_Point failed to start. Verify that you have sufficient privileges to start system services.
I ran the AIUS.msi and recieved the same error.
I went into services and stopped and restarted BITS, so my permissions seem fine. Has anyone else seen this problem?
Thanks
Jaz

I have created a Reddit in SCCM, describing my peoblem.
Please, can anyone take a look at it?
http://www.reddit.com/r/SCCM/comments/2jbkfr/asset_inteligence_update_service_installation_ai/
it goes like this:
I have came across an error entry in Monitoring node in SCCM console. Monitoring - System Status - Component Status, there was an entry about AI Update Service giving errors like this:
1) On 10/15/14 08:38:03, component SMS_SITE_COMPONENT_MANAGER on computer "SERVER FQDN" reported: Site Component Manager failed to reinstall this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the reinstallation in minutes. To force Site Component
Manager to immediately retry the reinstallation, stop and restart Site Component Manager using the Configuration Manager Service Manager.
2) Product: Asset Intelligence Update Service Point -- Error 1920. Service 'AI_UPDATE_SERVICE_POINT' (AI_UPDATE_SERVICE_POINT) failed to start. Verify that you have sufficient privileges to start
system services.
What I have tried to do: - Reinstall the role from ConfigMgr console
- Install the AI role manualy from .\ConfigMgr\bin\x64\AIUS.msi with elevated rights (domain admin rights) and from elevated CMD (domain admin rights) - Install the AIUS.msi with local administrator
account
Manual installation was both:
- During the time SCCM tries to reinstall the role by it self
- During the time the role isn't installed at all
- During the time the role was installed before it was uninstalled for the first time when I started troubleshooting this
Basically nothing can start the service during the installation, not even account with domain admin rights.
Do you have any idea what can I do next?
The IT guys from LukOIL

New update for iCloud fails to install

Is anyone having trouble getting the iCloud update for windows to install?

I haven't been able to get the last 3-4 updates to install. They get almost to the end and then I get an error message "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support or package vendor." I've tried turning off my antivirus and my firewall before running the update but the updates still won't complete the installation. I've also tried to install each manually but that doesn't work either.
iPhone 5, iPad3 iOS 8.02, PC, Win7 Home Premium, 64-bit, Norton IS

Security Update (KB954430) repeatedly fails to install (Code 64C)

Things I have tried:
- hotfix tool
- disabling virus protection
- downloading and manually installing the update (Error: the feature you are trying to use is on a network resource that is unavailable.)
- downloading and running this update: Windows6.1-KB947821-v34-x64.msu
- update from Windows Install DVD (I think this is called an in-place install)
I fear I will have to format and reinstall Windows and all my programs. Is there anything else I can try? Is it terribly risky to simply continue working without this update?

Method 1:
Follow the instructions in the link below to rename Software distribution and catroot folders and try to install the service pack.
You cannot install some updates or programs
http://support.microsoft.com/kb/822798
Method 2:
Follow the instructions in the link below to reset Windows update components.
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058
Method 3:
Perform System File Checker (SFC) scan which will help you in resolving the issue.
To determine whether the issue that you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool scans system files and replaces
incorrect versions of the system files by using the correct versions.
Follow the instructions in the link below to run SFC scan.
http://support.microsoft.com/kb/936212/
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Security Update 2008 007 failed to install

I just attempted to install Security Update 2008 007 but it reported installation failure. Do I try again or wait for another version?

How did you try to install it? Via Software Update or from a direct download?
About Security Update 2008-007
http://support.apple.com/kb/HT3216
It can be downloaded from here:
http://www.apple.com/downloads/macosx/apple/security_updates/
Make sure you choose the correct version for your system!
Try re-installing it again, but repair permissions first, and don't forget that it requires a re-start.

New CC Update, all programs fail to install?

No Idea what is causing this. The Method to install the new programs is so unintuitive, how am I suppose to know what the issue is.

I was finally able to find an error message on the Creative Cloud application.
It looks like the programs installed, but with some error. I will follow the instructions that it lays out
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\baluk\AppData\Local\Temp\{16D1F87A-87A4-4852-A521-7956EDD5C507}\PremierePro_8_L S20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com

HT1923 I have tried to remove and reinstall Itunes after they sent out the latest update. Fails to install. There is no way to go back to a previous version that works on windows 8.1

Apple's latest update to iTunes failed to install on my computer with Windows 8.1 64 bit. I have reinstalled in many times, removed Itunes via Control Pannel, etc. etc. No luck. Tried to go back to an older version, but all of the installs try to install the latest version. I suspect there is a problem with this update and vesion.

Solving MSVCR80 issue and Windows iTunes install issues.

HP Updated USB and wireless Lan Failed to install

my USB Hard drive cant be found and i've noticed the Intel USB 3.0 extensible host controller FAILED to install the update , and also the Ralink Wireless network driver update / LAN also failed to install , i have tryed other USB hard drives and they also cant be seen , whats the fix for this Please , Thanks
This question was solved.
View Solution.

Hi,
Happy Computing!
Jaco
Errare humanum est.

Firefox won't open in Windows 8.1 after latest update failed to install

Latest update for firefox failed to install.
Now, when I try to open firefox, I get the hourglass circle and then....Nothing. Check the processes and it is showing as a background process, but not doing anything. No error message, no crash alert.
So, I uninstalled firefox. Download the installer. Open the installer and...nothing. Again the process is there but nothing is happening.
Tried killing all processes and rebooting and trying the re-install. Still nothing.
The only thing I haven't checked is Nortons Firewall but I thought I might as well ask while I am at work if there is anything else I should check.
Was working fine until this update failed. On Win8.1

I would try restoring preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5
If that doesn't work, a Clean and Reinstall might do it...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

ACR Update 6.5 fails to install

Similar Messages

Maybe you are looking for