ACR won't automatically identify Lens Profile Correction even though lens can be manually selected from drop-down

One of my most-used lenses is the new Canon EF 16-35L f/4.0
It does need lens profile correction; but Adobe Camera Raw isn't automatically loading it, as it does with all my other L lenses.
I can manually pick the lens from the list, so the profile has definitely been loaded, but manual selection takes time, and time is bad for workflow.

If that lens profile is indeed the proper one for your lens, rather than something being slightly different and why ACR isn’t selecting it, then the situation is easy to fix:
When you have a raw photo open that was taken with that lens, then in the Lens Corrections / Profile tab, first choose the proper lens profile, then under Setup, choose Save New Lens Profile Defaults. That should tell ACR you want it to choose that profile whenever it sees the lens the current raw file was taken with.
For this to work your CR defaults for photos opened with that camera need the Lens Corrections / Setup default set to Default and not Auto. Auto will skip the manually-defined defaults and Default won’t.
To set the Camera Raw defaults open a new raw photo that doesn’t have any adjustments, set the Lens / Setup to Default (rather than Custom or Auto) and choose Save New Camera Raw Defaults from the menu that appears after clicking on the small icon at the right of the Lens Corrections title bar.

Similar Messages

I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on. It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password

I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on. It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password

Try this for your home Wi-Fi:
On your iPhone, Settings > Wi-Fi > select your home network > "forget this network"
Power down (unplug) your wireless router
Restart your iPhone
Plug in your router
Re-join that network
I don't know if this simple technique will fix it for good but try it. There is a long thread about this problem here: iOS 6 WiFi Disabled

Lens correction won't automatically detect lens and correct

I'm having a fun time with the lens correction feature in LR 3.2, but it will not auto detect the lens. I have all profiles loaded, I checked. I convert all photos to .dng from the .nef format. (Nikon shooter) When I enable the profile corrections button the setup changes to custom and the lens profile "maker" drop down says none??? and on the bottom it reads "Unable to locate a matching profile automatically." If I change the Make to Tamron by manually selecting it, for example, it finds the profile and all is well. How in the heck do I set it up so the profile connection is enabled automatically and the right lens pops up without intervention?? Hope someone can help with this...I'm working through 500 down selects and this would be nice to fix this issue.
I can see all the lens info in the metadata on the normal library screen????.
Thanks so much for your help in advance!

So you have Tamron lenses...
Here's a quote from a post by Eric Chan (one of LR/ACR developers):
Re: the Sigma 10-20 question. Regrettably, we cannot always automatically determine with 100% certainty the identity of the lens used to shoot the image. We try to be conservative. So if in doubt, we don't choose one automatically. For some third party lenses, this can happen. Choosing Sigma from the Make popup is the right thing to do in this case.
Still, you can try the following trick:
Choose an image shot with a Tamron lens.
Go to lens correction. (The Lens profile auto-detection is supposed to be failed at the moment.)
Choose Tamron and the desired profile from the lists.
Drop down the Setup list and choose "Save New Lens Profile Defaults".
This should rememeber the lens setup (i.e. slider values and lens profile) for the given camera/lens combination.
You can also use a develop preset to apply a lens correction quickly.

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish to edit in these everything works fine.

Same here. I've never had trouble with this function before.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

My iMac won't stay connected to the internet, even though all other computers in my house stay connected

My iMac won't stay connected to the internet, even though all other computers in my house stay connected, and its connection is set up the same way my fiance's macbook is (his macbook is about three years older than my iMac). Every time my computer goes into sleep mode and I come back (even if it's mere seconds after giving the black screen) I have no internet connection. I discovered a workaround for it some time ago, but now that is working less and less, and now my computer randomly disconnects WHILE I'm actively using the internet. Just a few minutes ago, the connection refused to come back until I restarted my computer, even though once again all other computers in the house were connected. The workaround I discovered before and which doesn't work as reliably now, is to click opne Airport at the top right of the screen, click "Open Network Preferences," then click "Assist me," then click "Diagnostics," and wait for everything to turn green again, signalling a connection.

Let's check the quality of your connection since signal strength alone does not insure a good connection. The "bars" that you see at the top of the iMac screen are there pretty much for show.
Hold down the option key on the iMac while you click on the Apple icon at the upper left corner of your screen and select System Profiler
Look down the list of items at the left of the window until you find the setting for Network, then click on AirPort.
In the window to the right, look for any listings of your wireless network name. You may possibly see two listings for the wireless network name.
We need for you to list the information that you see for Signal / Noise. These will be negative numbers. Post back with your findings and we will continue.
In the meantime, please move any cordless phones that you have or any other electronic devices that are near the iMac as far away as possible from the iMac.
If the iMac is located in a corner or an enclosed area, give it as much room as possible since the wireless antenna is on the back of the iMac and it needs to be able to "see" the room.
Anything that you can do to minimize the number of obstructions like walls or furniture etc between the iMac and the wireless router will help the cause as well.

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

Ipod touch won't sync all of the music even though there is enough free space

my ipod touch won't sync all of the music even though there is enough free space. what can i do to make sure all of the music syncs?

Seen this tech note?
Syncing music to iPod or iPhone - Apple Support

Games I bought years ago, Texas Holdem and iQuiz will no longer transfer to my iPod Classic. They show in my computer "Apps" but they won't transfer. They no longer show that they can be "Re-Downloaded" from "Previously Purchased" they don't exist there.

Games I bought years ago, Texas Holdem and iQuiz will no longer transfer to my iPod Classic. They show in my computer "Apps" but they won't transfer. They no longer show that they can be "Re-Downloaded" from "Previously Purchased" they don't exist there.

Have you seen this article?
Syncing and troubleshooting iPod games
B-rock

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

TS3159 Some songs that I've bought on iTunes won't play on my iPhone 3GS even though they used to and they will still play on iTunes. Anyone know what I can do to get these songs to play on my iPhone again?

Some songs that I've bought on iTunes won't play on my iPhone 3GS even though they used to and they will still play on iTunes. Anyone know what I can do to get these songs to play on my iPhone again? Please help!

No, I haven't figured it out. And no one from Apple has contacted me to help. Very frustrating. Sure makes me want to not buy music on iTunes and just buy CD's.
Do you have a 3GS too? Maybe it's something with that phone??

CanoScan 9000F scanner won't work on my MacBook Pro even though it should be compatible with the Mac 10.7.2 OS.

My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?

I have a similar problem with a new CanoScan 9000F which I tried to use without any success on my desktop computer (Mac Pro 5,1) and laptop (Macbook Pro 1,2) both running OS 10.6. Problem is identical on both, viz:
• Scanning process appears to start, a message comes on the screen: Scanning do not open document cover followed by Scanning...
• This is then replaced by the message: Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 2.155.33
I've spent several hours on the phone with Canon support but having uninstalled/installed/reinstalled/updated/turned on/turned off/unplugged/plugged/restarted innumerable times, the problem is exactly the same. The scanner icon shows up in the Printer & Fax System Prefs (though without the little status lights) and shows as being connected in the USB tree. I think it's a problem with the scanner, Canon bods are suggesting the Macs are at fault and suggest I try connecting to a wintel (hawk, spit) and it's 100km to the nearest Canon service centre.
Any suggestions as to what might be the problem/s and what I might be able to do to fix it/them?
Thanks.
By the way, bought the Canon to replace a HP Scanjet 8300 which I've used for 6 years almost without problems. Any that I have had have been fixed merely by turning the scanner off then on after a 10 second rest.

Iphone 4 just turned itself off, won't turn on again - sleep/wake button hasn't worked for a while - tried charging (even though it was 50% charged when it shut down) and that makes no difference....tried usb to computer and directo to wall socket. help?

phone 4 just turned itself off, won't turn on again - sleep/wake button hasn't worked for a while - tried charging (even though it was 50% charged when it shut down) and that makes no difference....either via usb to computer and direct to wall socket. Any suggestions...other than heading off to the genius bar tomorrow?

Well, the sleep/wake button is also the power button. If you cannot use it to turn on, then you cannot use it to perform a reset by holding it and the home button together until you see the Apple logo.Those are the only two ways to turn the device on. You can try letting the battery go completely dead and then trying to plug it in. After it has charged for 20-30 minutes, the device may come back on. But, without the sleep/wake button, there is no other way to turn the device on or off.

Has anyone recently installed the newest i-tunes but it won't recognise their phone is connected even though it makes the ping noise?

Has anyone recently installed the newest i-tunes but it won't recognise their phone is connected even though it makes the ping noise?

Give this a shot http://support.apple.com/kb/ts1538

Why won't contacts sync to iPod classic even though music and calendars do?

Why won't contacts sync to ipod classic even though music and calendars do?

I have found a way. Not elegant, but it does work.
Itunes looks for a contact list on your mac. But, if you are signed up for iCloud, it appears your contacts are actually on iCloud, not your Mac. So, you see your address book (left column) shows headings for "on my mac" and for "iCloud". If you select "on my mac", no contacts appear.
However, you can drag contacts or groups of contacts from the iCloud list to the on my mac list. They will then sync to your iPod classic.
Of course, you'll have to periodically some housecleaning as you modify the contacts that are in the cloud, but it does work.

My Firefox won't let me browse the Internet, even though I'm connected to the Internet.

Excuse me, but my Firefox 3.6 just randomly stopped working. It won't let me browse the Internet anymore-- the error message it always gives me is "Unable to connect", even though I'm fully connected to the Internet. Earlier I opened up Safari and Internet Explorer 9-- both, in which, let me browse the Internet, and I had a full connection. But, whenever I use Firefox now, it says "Unable to connect". And every time I type in a URL on it, Firefox gives me the ''SAME'' error message. I don't know what to do now. I uninstalled and reinstalled Firefox and it does the same thing. So now I am stuck with using Safari, when I really wanna use my Firefox. Why is it doing this?

Make sure you are not set to Work Offline in File menu.
There is a possibility that your connection dropped even briefly, more so if using wireless. Make sure Firefox is not set to "[v] Work Offline" in File menu just above Exit.
By default, Firefox 3.5 and 3.6 will automatically use offline mode if there is no network connection. Under certain conditions, after the connection is reestablished it may remain in offline mode without the user's knowledge. Firefox 4 and newer prevents this behavior by default. To prevent this behavior in versions 3.5 and 3.6, add an entry to the '''about:config''' options, as follows.
* Type '''about:config''' in Location (address) bar
* Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean preference. Name: '''network.manage-offline-status'''. Value: '''false'''
http://kb.mozillazine.org/Error_loading_any_website#Work_Offline_Setting

ACR won't automatically identify Lens Profile Correction even though lens can be manually selected from drop-down

Similar Messages

Maybe you are looking for