Acro Pro 8, Pitstop & Vista

I have a new Vista machine with the above all installed. They played nicely together on my XP machine, but now when I run a batch sequence, Acrobat crashes and I get the following error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Acrobat.exe
Application Version: 8.1.0.137
Application Timestamp: 46444c82
Fault Module Name: PitStop.api
Fault Module Version: 7.5.2.0
Fault Module Timestamp: 47bae800
Exception Code: c0000005
Exception Offset: 00156cb7
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 121d
Additional Information 2: 974122b9ff7ea778baf9c2866ee0e97c
Additional Information 3: 7288
Additional Information 4: d97c8e53ae6198bece027e21658ec6d5
I've looked everywhere for information and couldn't find anything. I'm hoping one of you wizards can help.
Thanks,
Vicki

Andi,
I'm going to call them on Monday, they said Vista was no problem when I
first installed it. I'll report back what I find. Thanks for your quick
reply.

Similar Messages

  • Acrobat 9 Pro Broken In Vista

    I have Acrobat 9 Pro installed on Vista 32-bit, but it can't even do simple PDF printing from something like Word or IE without getting "Access Denied." I have UAC-enabled and do NOT plan to disable it anytime soon. The Adobe PDF printer is installed in the Printers section and Acrotray is running...

    I was reading that I might have to give Windows/TEMP folder full-rights for the PDF conversion to work. I did that, but it is still a no go. I also tried to run Distiller 9.0 standalone (right-click Run As Administrator) once to see if it can create the temp folders itself, but no-go... How are other people running Acrobat 9 on Vista without problems?

  • [7Pro] [Acro Pro XI] After Started Acro Pro XI, AcrobatPro XI quit without message after 20 secondes

    [7Pro] [Acro Pro XI] After Started Acro Pro XI, AcrobatPro XI quit without message after 20 secondes
    Hi All,
    See the resume in the title..
    [7Pro - 32Bits] [Acro Pro XI] After first Started Acro Pro XI with last Update v11.0.9 (no PDF files opened.. just Acro Pro XI application), AcrobatPro XI quit unexpectedly without message after 20 secondes
    I've in first :
    Uninstall Adobe Reader XI then Un-install Acrobat Pro XI then restart the computer then Install again only Acrobat Pro XI then restart the computer..
    Try to start the Acrobat Pro Application after downlaod the last update (v11.0.9)
    Same behavior : Adobe Acrobat Pro XI quits unexpectedly
    I've tested also to start in Administrator mode but it's the same result..
    Have you any idea or direction for find a solution please ?
    Thanks a lot by advancing
    Best Regards
    Pierre Jarrige

    Hi All .................................................
    So, Today I've decide to Un-Install Adobe Acrobat and Reader Products.
    Use The Acrobat Cleaner Tool for Acrobat Pro and Reader for deleted prefs, registry etc....
    restart he computer then update all firmware of the computer DELL OPTIPLEX 380
    Restart again the computer then Install in ADMINISTRATOR mode Acrobat Pro XI
    Then download manually the updater 11.0.9 and install it just after
    Restart a new time ..
    Start Acrobat Pro and bad result .... Acrobat Pro quit unexpectedly after 20s for his first start without document open
    Why nobody give an idea or answer ????
    Thanks by advance
    Pierre

  • Acrobat 6.0 Pro on Windows Vista

    Is there an update or soluttion to be able to use Acrobat 6.0 Pro on Windows Vista?
    I've been through the Adobe online help forums.

    it's your lucky day!  you can upgrade to acrobat 7 pro at no charge:  http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Where is the custom stamp location in Acrobat 9 Pro for Win Vista

    Where is the custom stamp location in Acrobat 9 Pro for Win Vista?

    See this thread to find out how to determine the location:
    http://acrobatusers.com/forums/aucbb/viewtopic.php?id=17521

  • FF4 print to PDF (Acro Pro) renders text as image (FF3 did not)

    When I create a PDF with Acro Pro using FF4 the text is rendered as an image. FF3 did not do this (other browsers render text as text as well). Win 7 Pro 64-bit, FF 4.0

    Oh man, you really made my day!!
    This nasty error has been torturing me for several weeks now.
    I installed and reinstalled and again all Adobe software, with no effect, I checked and rechecked all settings with other pc's since they all made perfect PDF's.
    But not this one!!
    Unchecking the "hardware acceleration box" did the trick.
    Who would have thought of that one!!
    Just look at my happy face now.
    Mozilla should really fix this weird bug.

  • Audigy 4 Pro Problems in Vista Ultimate 64

    Hello,?I have Problems with the Recording Source Line in / Mic and What you Hear on my Soundblaster Audigy 4 Pro in Windows Vista Ultimate 64bit. I use the Beta Drivers 2.2.0002When i record over Line in / mic or What you hear sometimes the recording iss?distorted.When i restart my System sometimes it works sometimes not.

    I have not had that issue with an Audigy 4 with 32bit Vista. Don't expect to get many answers from Creative here though. I would use your onboard sound untill they get decent drivers out for Vista 64. Are u from Ohio Good luck, Diseaseboy

  • Skydrive pro in windows Vista

    Hello,
    Is there a way to install skydrive pro in Windows Vista?
    We have still a number of vista pc's running and hope there is a solution for this.
    Thanks!

    Hi,
    The Supported Operating System for SkyDrive Pro client are:
    Windows 7, Windows 8, Windows Server 2008 R2, Windows Server 2012.
    Vista is not supported.
    For more information:
    http://www.microsoft.com/en-us/download/details.aspx?id=39050
    Regards,
    Melon Chen
    TechNet Community Support

  • Acro Pro XI  - boo.  two license charges for dual-boot

    Who do I contact to petition for change in Adobe Acro Pro license restrictions which demand double payment for me alone running one instance of Acro Pro at different times on a dual-boot Mac Book Pro, sometimes under Snow  Leopard, and sometimes under Mountain Lion??  These two environments do not run at the same time. This is not a Parallels or VMWare question.
      I rely on Acro Pro, it's critical. I need it, and don't want to pay twice for it or be committed to using Acro Pro in only one of these environments or the other, but not both. I switch back and forth between them frequently.
    I may be one of the few people on the planet with both SL and ML on the same HDD on the same machine, cross-mounting my *one* home directory and /Applications from the newer ML installation back to SL.  Even complex applications like XCode3 and XCode4, work just fine where the newer version doesn't run under the older operating system. Amazingly, most all other apps, excepting this issue with Acro Pro are Apple-copeceti, and just work.
    When Acro Pro XI pops up under ML from it's SL installation, it finds the 'fingerprint' of the machine changed, complains, and exits.

    Hi Cyberi.US,
    A retail license for Acrobat XI Pro is good for 2 machines so there should not be any problem using it on you MAC unless you have tried activating on a 3rd computer else where.

  • I am trying to remove Acro Pro 9, and install Acro Pro X. Cannot Uninstall Update 9.5.1--?

    I am trying to remove Acro Pro Nine from a machine, and to install Acro Pro X.
    I manually "deactivated" the Nine, as instructed.
    Now I go to Win XP "Add/Remove Programs" -- there is the Acro Pro, and there is a separate entry for Update 9.5.1.  Win XP says "This update cannot be removed."
    I would rather not crash this machine.  If I remove the core Acrobat 9 Pro, will "Adobe Acrobat 9.5.1 -CPSID_83708" be a problem? 
    Thanks!

    Hi Xenophon,
    You can remove the Acrobat 9 Pro from your machine and that will itself take care of the entry named "Adobe Acrobat 9.5.1 -CPSID_83708".
    This entry denotes the latest update to Acrobat installed on this machine.
    You don't specifically need to worry about this.

  • Acro Pro XI Asking Me to Buy

    I already own Acro Pro XI; bought back in 2012. Now I'm getting a message telling me my trial license is expiring in 27 days. What's going on? I have CC license with all other apps and am using their CC versions EXCEPT for Acro XI. I kept this active because I may not be continuing my CC license for other apps when it expires this July.
    I thought I'd better post this to the forum because I've been waiting for 34 minutes now with Adobe's supposedly live chat line.
    Just connected after waiting 40 minutes; spent 10 minutes going back & forth and rep then said he couldn't answer my question and was referring me to the technical support team. Waiting now for 6 minutes.

    open acrobat pro > click help > activate.

  • Satellite Pro A200: XP + Vista installed/dual boot possible?

    Hi,
    I am not sure if I am right here at XP OS but I post it as it is OS related.
    My Satellite Pro A200 (PSAE7) runs smoothly with XP but I want to create a sandbox (partition) for/with Vista.
    Basically I know that it is possible to run XP and Vista on one system. *But*, Satellite Pro A200 notebooks are shipped with a BIOS for XP and one for Vista and with information that you have to install the correct one. For me this means that you have to install BIOS for XP when running XP and BIOS for Vista when running Vista.
    Question:
    Is it possible to install Vista on a Satellite Pro A200 with XP as main OS and having so XP BIOS installed?
    Boot loader would be Acronis OSS as this loader already manage my two XP partitions.
    Many thanks for any information!
    Best regards,
    Andreas

    Hi
    In my opinion there are no serious reasons why you shouldnt be able to use Xp and Vista on your Satellite Pro A200.
    Ok there are different BIOS for Vista 64bit, 32bit and Win XP but your Vista should run also using the BIOS for Win XP.
    Ive got other Satellite notebook series and Im able to use XP and Vista at the same time. I mean Ive got a choice to boot either the XP or Vista ;) and Im still using the old BIOS version.
    Ok some functions are not available like FN keys but this is not very important for me.
    Well, to cut this story I think you can use Vista and XP without changing the BIOS ;)

  • Webcam NX Pro with windows vista

    I just bought a new comp with vista on it and can't seem to find drivers anywhere to get my nx pro to work with vista. I get an error message that says "CTPCam.exe has stopped working" and it can't find a solution. Does anyone know ANY way to make this thing work?

    I too am running Windows Vista. According to Creative's website, they do not have a fix for Vista and DO NOT INTEND TO develope one. So, for all of the thousands of purchasers of NX cameras and many other Creative products, we are abondedc, left out in the cold, in other words, screwed. It apears that Creative does not care about their customers and just wants up to spend more and more money to buy their products. I for one will NOT.Montanamam

  • Satellite Pro A200 with Vista doesn't see other XP notebook in the network

    I have Satellite Pro A200 Toshiba and I have some problems with the network.
    The Inernet is upp and going but I cant find the other computers in my network.
    Im having 3 other computer in a network. The A200 is having Vista and the other one is having just XP-pro and XP-home.
    The network by the tree standalone is working fine but the laptop is not present in the network.
    I've have checked the workgroup so it the same.
    Is there anyhone thats having any idea how or whats the problem?

    Hi again. Ive discovered how to solve the problem! Its the Norton Internet security thats causes the problem.
    Just open the program, right click at the icon down at right, click at "Norton Protection Center"
    Click on the "Norton Internet Cecurity", Wirewall settings, Commin Settings, Common Rules, Configurate,
    Scroll down to "Standard-Block filesharing in Windows" Mark and "Modify", Mark the option "Allow" Save and go!
    If You have understand what Ive written it should be working, the thing is that I have Swedish versions of all the software
    so it might be a littel hard to understand the translation that Ive done. Try to use it and look for the most likness of my poor English.
    regards
    /bejjo
    Message was edited by: ADMIN

  • Target Disk Mode on Macbook Pro to Windows Vista?

    I am scheduled to take my Macbook Pro in for the NVidia Warranty repair and need to back up the hard drive (I know, I know...). I can't get the Macbook to boot at all b/c of the NVidia issue, except in Target Disk Mode.
    And the only other computer I have is Windows (I know, I know...this feels very cathartic, btw). Is it possible to have the Windows Vista computer connect to the Macbook via FireWire while the Macbook is in Target Disk Mode to temporarily back up my files on the Windows computer?
    I know I could pay for backup, but I'm cheap. So I'm trying to find a workaround.
    Any help would be appreciated!

    Is it possible to have the Windows Vista computer connect to the Macbook via FireWire while the Macbook is in Target Disk Mode to temporarily back up my files on the Windows computer?
    It may or may not work depending on the PC's configuration, but a program such as MacDrive needs to be installed on the PC to enable it to read the Mac's hard drive in any case.
    (48277)

Maybe you are looking for