Acrobat 11 Pro - problem with right-click "Convert to Adobe PDF" output folder

I'm migrating from one machine running Windows XP Pro with Acrobat 8 Pro to Windows 7 Pro with Acrobat 11 Pro.
On the XP machine, when I right-click on a document and select "convert to Adobe PDF" the process works just fine - it always outputs the file to the target destination I have set in the Adobe PDF printer definition.
On the Windows 7 Pro/Acrobat 11 Pro machine, the exact same settings are ignored: the PDF will always end up in the same folder as the source file.
Both the source folder and the destination folder are on one of my office's networked drives.
Under the Printing Preferences, I have the output folder address set the same on both machines, so it *should* go to the right location on the new machine.
Oddly enough, on the Acrobat 11 Pro machine, if I select Adobe PDF as the default printer and do a test print, it *does* print to the correct folder!
This has got me stumped!
Thoughts?
(update from later in the day)
If Adobe PDF is selected as the default printer, I *can* select a bunch of documents, right-click, select "print", and Word will open up, and they'll print to the correct target folder.
So, it's "just" the right-click "Convert to Adobe PDF" that doesn't work correctly.

The reinstall is typically the last ditch effort to do. The first step is Help>Repair and Help>Updates. As far as Office 2013, the PDF Maker of AA X is not compatible and you can only print. In your list of errors it showed a problem with AcroTray.exe. As a first step, go to the print and select print-to-file. The file will be a PS file (maybe with a PRN extension). Once the printer if finished, open the file in Distiller to complete the process. If that is successful, then the problem is with AcroTray. Check your running tasks to be sure AcroTray is indeed running. If not, that is likely the problem. If it is, then restart it (it is located in the Acrobat folder). AcroTray provides the interface between the PS creation and Distiller to automate the process of creating the PDF.

Similar Messages

Problems with Right Click

Hello,
I have a Breeze Presentation that has a Flash button on one
of the slides that contains actionscript to open an html file in a
new, fullscreen window. The html file is actually a compiled
captivate movie. The movie is a simulation where the user is
required to do a right click. I used the information to create the
right click off of Adobe's website, and it works fine when it is
not associated with Breeze. Of course, it is much more desired to
have it work in Breeze. If anyone has any suggestions on how to fix
this, it would be greatly appreciated
Thanks
Doug

Hi,
This is a bug(96289), the same as the Base bug 1477977 which has NOT been fixed in Release 9.0.2 (as Oracle anounced) or in any earlier releases.
Bug 1477977 was currently scheduled for the 1st patchset of Forms 9.0.4
I don't know if it was fixed. Contact Oracle about that.
Right now, to achive what you want you must left click to select a node. This means that the use must do a left click and a right click to have an item selected.
Monica

Adobe Acrobat 7.0 Pro PC with Windows 7 - error mess "Adobe PDF Printer - not available" Help?

Just loaded my old Acrobat 7.0 Professional on new PC with Windows 7 - Error message "Adobe PDF Priner not available. Therefore do not have option of Adobe printer when using Word.
Any ideas as to what - if anythjing I can do?

Hi,
Technically acrobat 7 not not designed for windows 7 OS. You can try to install the pdf printer manually but it's not guaranteed :
Click the Windows "Start" menu, select "Control Panel," choose "Hardware and Sound," click the "Add a Printer" link under Devices and Printers.
Click "Next" and select "Local Printer Attached to This Computer."
Remove the check from "Automatically Detect and Install My Plug and Play Printer" and click "Next."
Select "My Documents\\*.pdf (Adobe PDF)" in the port selection drop-down menu and click "Next."
Select the "Have Disk" option and click the "Browse" button to open a dialog box.
Select the "AdobePDF.inf" file located in the AdobePDF folder in your Program Files directory under "Adobe" | "Acrobat 9.0" | "Acrobat" | "Xtras."
Select the first item on the list of Adobe PDF Converter options and click "Next."
Type "Adobe PDF" in the field for a printer name and click "Next."
Wait for two minutes for the system to process the drivers and click "Finish" to close the Add a Printer wizard.
Hope this helps.

Problem with right click in web template

Hi,
i have this problem:
how can i do for that not appear Enterprise broadcaster when i push right click in the web template?
I only want that appear email broadcaster.
Best regards,
Conrado

Hi Conrado
In the WAD there is a web item called the CONTEXT_MENU, in the properties of this web item you can set what options are available when the mouse is right clicked in the Web Template, to remove Enterprise broadcaster just untick it in the properties.
Cheers
Josh

Problems with right click in hierarchical tree

Hi,
I create a popup menu in a hierarchical tree and want to call this referencing to a node in the tree.
I can get the node in GET_TREE_NODE_SELECTION but the node need to be selected for this...
How can I select a node with a right click?? and then call the popup menu??
Am I clear??
Why the trigger MOUSE_CLICK doesn't works for right clicks??? I know about the SYSTEM.MOUSE_BUTTON_PRESSED but to use this I need a RIGHT_CLICK_TRIGGER... that I don't know how to call...
thanks!

Hi,
This is a bug(96289), the same as the Base bug 1477977 which has NOT been fixed in Release 9.0.2 (as Oracle anounced) or in any earlier releases.
Bug 1477977 was currently scheduled for the 1st patchset of Forms 9.0.4
I don't know if it was fixed. Contact Oracle about that.
Right now, to achive what you want you must left click to select a node. This means that the use must do a left click and a right click to have an item selected.
Monica

Problems with hyperlink when converting .docx to .pdf using Word 2010

I have a Word 2010 .docx document that has a link to a web site in it. The link works fine in Word, but does not work after the conversion to PDF. I am using the Acrobat add on in Word to create the PDF.
There is a pound sign ( # ) in the Word doc hyperlink and it is being changed to a percent sign ( % ) during the conversion to PDF. Any suggestions?

I will report the bug. I had read about some other problems with .docx files so I saved the .docx to .doc and then converted but I got the same results.
Thanks for the feedback.

I need to be able to right click on a saved document and have the option to convert to Adobe PDF. I have the Abobe Acrobat Xl Pro and used to have this option until I had to create a new subscription. What do I need to do in order to have this option?

I need to be able to right click on a saved document and have the option to convert to Adobe PDF. I have the Abobe Acrobat Xl Pro and used to have this option until I had to create a new subscription. What do I need to do in order to have this option? I use windows 7

If you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers,

Combine supported files in acrobat missing in acrobat x pro when I right click drop down menu

combine supported files in acrobat missing in adobe x pro when I right click drop down menu also Convert to Adobe PDF is missing too. The open with & share with options are gone too when I right click files. My computer crashed & I had to have the motherboard replaced. The tech store put some of my programs back on my compter but not sure how or if they did stuff correctly. Need help fixing my problem becasue I use this all the time. Thanks

I'm having the same issue. I got a new PC, insalled Acrobat X pro and when I right click on an Office file, I could not combine or convert Office files to PDF. I upgraded to Acrobat XI and still no fix. I triled to convert or combine office files to PDF from within Acrobat and I get an error message saying "Acrobat does not support the conversion of one or more of your files to PDF. Please remove these files or go to Settings and choose the PDF Portfolio option".
I've tried to convert or combine Office 2003, 2007, 2010 and 2013 files and none work. The weird thing is that the option shows up for Excel .csv files. Even more werid is that I have the PDF tabs showing in the Office applications.
I contacted Adobe support via chat and they were unable to help. I was directed here, so any help would be great.
Thanks.

Install Acrobat Pro program, with 32-bit Lenovo computer without problems. Try to install HP computer with 64 bits and rejects me. I wish instalárselo. What do I do?

Install Acrobat Pro program, with 32-bit Lenovo computer without problems. Try to install HP computer with 64 bits and rejects me. I wish apply. What do I do?

What is the version of Acrobat you are trying to install?
Response: Acrobat Pro 11.
Are you getting any error message?
Response: I am not allowed to install.
Acrobat can be installed in 64 bits machine.
Response: every attempt in the 64-bit computer I rejected all attempts.
2014-06-12 10:42 GMT-05:00 Anoop9178 <[email protected]>:
Install Acrobat Pro program, with 32-bit Lenovo computer without
problems. Try to install HP computer with 64 bits and rejects me. I wish
instalárselo. What do I do? created by Anoop9178
<https://forums.adobe.com/people/Anoop9178> in *Creating, Editing &
Exporting PDFs* - View the full discussion
<https://forums.adobe.com/message/6453389#6453389>

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

How to Remove "OLAP Functions with right-click" in Workbooks (By VBA?)

Dear Experts:
After we created workbooks, to prevent end users from using certain BEx functions, we greyed out some "icons"
on SAP BEx Menu in the workbooks. But now we have one problems: because we also made "Setting" unable on the menu bar, now we are not able to remove one marked selection: "OLAP Functions with right-click". Is there any way we can disable "OLAP Functions with right-click", then users can only use the normal Excel functions in the workbooks??
Thank you very much and BR
SzuFen

Hello,
Go to Business Explorer Menu, Select Settings, Uncheck OLAP Function with Right Click and save it as existing workbook.
I have tried it. It works, when you reopen, it will be still disable..
Hope it helps.
San.
Message was edited by: SAN

Adobe acrobat Pro api with Java

Hi,
Can we call adobe acrobat pro Api with Java to edit Pdf forms. My requirements is to
convert the read only Pdf form to Editable/fillable Pdf Form.
Please let me know if there is any provision...
Thanks in advance.
Kind Regards,
Anil Kumar

Is there API available for calling Adobe Designer/Acrobat Pro from java/or any other language.Whether it be commercially licensed or anything ...kindly let me know..as it is too urgent.
Thanks and Regards,

New excel file cannot be opened with right click in any folder.

Usually I create a new file (.xlsx) by right click inside any folder of windows 7 . Recently I am observing that it is not being possible to create a new file (.xlsx) by right click when I am inside a folder. Whenever I right click in order to create a
new file no excel file icon or word file icon is found visible there though at that time other applications like access, power point and publisher file icons are visible. Only excel and word file icons are invisible. I don't know what the cause may be. I think
I have turned off some option by mistake. Is there any solution to this problem? How can I have the opportunity again?

Hi Nurulamin,
Thanks for your post, however, since this isnot an exchange issue, I recommend you post this in Windows Client Forum
also, as they should have more professional knowledge and you may get effective solution timely.
Thanks for your understanding!
Best regards,
Niko Cheng
TechNet Community Support

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

Acrobat 11 Pro - problem with right-click "Convert to Adobe PDF" output folder

Similar Messages

Maybe you are looking for