Acrobat 11 upgrade issue.

I just downloaded the Acrobat 11 upgrade. When I click to open the application it automatically shuts down. Multiple tries, same issue. Any solutions?

Hi Wendy,
I have few questions for you:
Was it working fine for you before?
Have you updated Acrobat to v11.0.07?
Have you checked the performance a new Admin account?
Try the following:
Move the cache.db file from the location Macintosh HD>Library>Application support>Adobe >Adobe PCD>Cache and move the cache.db file on to your desktop.
Close and reopen the application, you will get a prompt to enter the serial key, enter it and check if Acrobat is still crashing or not.
Regards,
Rave

Similar Messages

  • Acrobat 7 Upgrade issues

    I have an old copy of Acrobat 7 Pro (Upgrade version) that I'm trying to re-install on a new Mac. I do not have access to any of the prior software versions. Is there any way around this? I have it legally installed on the Mac I'm using now.

    You will need the serial number of version 7 and the earlier version. Please be aware that Acrobat 7 is not compatible with newer Macs.

  • AW: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

    Hallo
    Sehen Sie in der Anlage.
    Alles ist original.
    Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
    Oder geben Sie mir eine kostenloses Update.
    Ich habe ein Anrecht darauf.
    Beste Grüße
    Werner Göbel
    Mobil:     +41 (0) 79 559 83 21
    Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
    This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
    The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
    Von: Bill@VT
    Gesendet: Mittwoch, 27. August 2014 16:16
    An: Werner Göbel
    Betreff:  Update von Acrobat 8.0 auf 8.3
    Update von Acrobat 8.0 auf 8.3
    created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
    How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
    Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    < This thread has been answered a duplicate of Update von Acrobat 8.0 auf 8.3 >

  • WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

    Hallo
    Ich bin ein korrekter Mensch.
    Sie sehen in der Anlage, dieser Mail, das ich das Produkt ehrlich gekauft habe.
    Ich verwende nur original Software.
    Die Acrobat Version 8.0, war immer sehr gut für mich.
    Diese Version reichte für mich vollkommen aus.
    Ich hatte einen Computerabsturz und musste Acrobat auch neu installieren.
    Die Acrobat Version 8.0, ohne Update, stürzt immer ab.
    Das können Sie auch im Internet lesen.
    Jeder weiß das, dass Acrobat Version 8.0, ohne Update abstürzt.
    Es gibt aber dies Update nicht mehr zum Download.
    Ich erwarte jetzt von Adobe, kostenlose Abhilfe.
    Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
    Oder geben Sie mir ein kostenloses Update auf die neue Version.
    Ich habe ein Anrecht darauf, dass Sie mir kostenlosen Ersatz liefern.
    Beste Grüße
    Werner Göbel
    Mobil:     +41 (0) 79 559 83 21
    Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
    This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
    The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
    Von: Bill@VT
    Gesendet: Mittwoch, 27. August 2014 16:16
    An: Werner Göbel
    Betreff:  Update von Acrobat 8.0 auf 8.3
    Update von Acrobat 8.0 auf 8.3
    created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
    How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
    Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
    The ftp site is: ftp://ftp.adobe.com/pub/adobe/acrobat/.

  • Bought acrobat XI upgrade

    bought acrobat XI upgrade,  can't download, get error 413 "header length too large"

    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

    Hi,
    I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
    And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
    1. OBIEE 10g to 11g upgrade issues??
    2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
    3. Informatica 8.6.1 to 9.0.1 upgrade issues??
    4. DAC upgrade issues??
    any response for my questions is appreciated.
    Thanks
    Jay.
    Edited by: Jay on Apr 11, 2012 9:11 AM

    HI Jay,
    We cannot explained thread list here, If you get any errors plz post me,will try to help out.
    This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
    http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
    http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
    Award points it is useful.
    Thanks,
    satya

  • Report generation toolkit upgrade issues

    I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi.  Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore.  What vi's do I need to replace these functions with to make this code work.  Can anyone tell me what the work around is to solving this problem.  This is a picture of the code.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor
    Attachments:
    code.JPG ‏92 KB

    Hi BJD1613,
    The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
    In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.  
    This was reported to R&D (CAR# 123064) for further investigation

  • EHP Upgrade Issue - Java Stack

    Hi,
    Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
    Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
    Error log:
    Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
    JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
    Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    I went through the following link , proceeded with option 2, But still getting same error.  
    Portal Upgrade Issue
    Please advise the resolution for the issue I have.
    Thanks in advance
    Regards
    Srinivas
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

    Issue resolved

  • Upgrade issues list needed

    Hi,
    We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
    Some points i shortlisted are :
    1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
    2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
    3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    I know there are others. Any help would be appreciated.
    aRs

    Check the below links
    http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

  • Question on Acrobat X upgrade version

    Here is my situation:
    One of my users has a copy of Acrobat 7.0 Standard.  He recently got a new laptop with Windows 7 on it.  Acrobat 7.0 doesn't get along well with Windows 7, so we have decided to purchase Acrobat X Standard for him.  What I want to know is if it's necessary for Acrobat 7.0 to be installed before installing the Acrobat X upgrade?
    As best I can tell, Acrobat 7.0 does install on his computer, but the pdf printer portion does not.  Still, I do not want to be in a situation where my upgrade license doesn't work because the install is incomplete or damaged due to incompatibility with Windows 7, and I do not have time to try it and then go through hoops with customer service to send the package back if it doesn't work.

    In order to upgrade you don't need to install the old version at all, you
    just need to have its S/N at hand because you'll be required to fill it in
    during the installation.

  • Errors in Forte 3.5 -Upgrade issue

    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

    -----Original Message-----
    From: Venkatesh, Suma
    Sent: Thursday, May 24, 2001 2:39 PM
    To: '[email protected]'
    Subject: Errors in Forte 3.5 -Upgrade issue
    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

  • R12 upgrade issue:Not able to login using forms:Please help****urgent

    We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
    We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
    We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
    Any help to resolve this issue will be appreciated.

    Duplicate thread ...
    R12 upgrade issue:Not able to login to forms**please help
    Re: R12 upgrade issue:Not able to login to forms**please help

  • ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

    Hi Basis Expert,
    while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
    Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
    Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
    We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
    Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
    Hope anybody can share a bit your experience on this issue. we try search the note and  find the forum but no luck.
    Thanks

    Hi,
    > 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
    > 2EETG011 "No shadow system""DB-connect not against shadow tables !"
    >
    It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
    Thanks
    Sunny
    Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

  • To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?

    To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?
    I had two laptops stolen and the reinstall is a real pain. This also applies to reformats and changeovers to Windows 7, etcetera.

    Windows 7? Then don't waste your life minutes fumbling with an Acrobat 8 - Windows 7 combination.
    If you are to be using Win 7 you'll need the current release of Acrobat (XI). "X" will function but it is no longer marketed by Adobe.
    Be well...

  • Acrobat X Upgrade

    Can an Acrobat X Upgrade be used to upgrade a Reader X?

    No it cannot. Acrobat and Reader are two different applications.

Maybe you are looking for