Acrobat 7.1 update for Windows (with CS2 Premium) Continuous Configuration at Boot Time
I'm running Windows Vista Ultimate SP1 on an IBM T43P laptop with current MSFT patches. My system is set to automatically download and apply Adobe Patches.
The patch installs, but requires "configuration" at every boot time. It completes the configuration process and requests re-boot or defer to complete the installation/configuration process.
My system has been doing this for more than a week. I finally uninstalled Acrobat 7.0 (from within CS2 Premium), re-booted, then re-installed Acrobat Pro (within CS2 Premium) for Windows. I downloaded the full 7.1 update and the process has started all over again.
Please advise, as the constant configuration at boot time and request to re-boot is annoying.
Thanks.
I use a different version of Acrobat, so didn't pay much attention... but I do know this has been discussed before, with a solution
You might try various terms at the SEARCH link
http://www.adobeforums.com/webx?126@@.ee6b2f2
From what I do remember (as I said, no details) the solution was "something like"
1 - manually install the update from the download page
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
2 - turn Acrobat's automatic updating OFF
Similar Messages
-
Download Updates for Windows Server 2012 R2 Security Baseline..every time I open SCM
Each and every time I open SCM, I am prompted to download the Windows Server 2012 R2 Security Baseline 1.0 Fr, August 15 2004... Doesn't matter if I've installed it before or not.
Anyone else seeing this problem? Does anyone know why this is happening or how I can get it to stop? I tried uninstalling SCM and reinstalling, but the problem continues.
SCM is installed on a Windows 7 virtual machine, if that is relevant.
Thank you,
RobSame issue here. Shame MS doesn't put more resources on this tool.
-
How do I manually transfer music with the new itunes update for Windows? I don't want to sync my library and lose all of my music for what I have in my current library.
The same way it was done in every previous version.
Connect the device to the computer.
Right click on the device in iTunes and select Transfer Purchases.
Why would you lose any content by syncing with iTunes?
Is this not the computer that the device is normally synced with? -
Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
davidI went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David
-
Upgrade to I-Tunes 7.4.2 with Apple Software Update for Windows
I upgraded to I-Tunes 7.4.2 and that went great. But I was also offered an Apple Software Update for Windows which would not install. The error message said something about a part of it not being able to run. Is this a Vista thing? I still have Windows XP and don't plan to change to Vista. Will I have issues with newer versions of I-Tunes if I can't get this Software Update for Windows to install?
Thanks!Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel. -
I-Tunes 7.4.2 with Apple Software Update for Windows
When I upgraded to I-Tunes 7.4.2, I was also offered an Apple Softward Update for Windows. This failed to install. The error message said something about part of it not being able to run or something. Is this a Vista thing? I still have Windows XP and don't plan to change. Will I have problems with newer versions of I-Tunes? How can I get this Apple Software Update for Windows to work - or do I have to?
Thanks!Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel. -
Acrobat 9.5.4 for windows 7 and now am unable to print, it keeps saying I have to install a printer-help
http://helpx.adobe.com/acrobat/kb/printing-problems-acrobat-9-4.html
-
Can I use Acrobat 8.1 Pro for Windows 8?
Can I use Acrobat 8.1 Pro for Windows 8?
Generally I agree, but there is a chance it will work. If you are talking about a 64-bit system, the likelihood of problems is substantially higher. The simplest way to find out is try it (assuming you have already purchased Win8 system. You will likely have to update to at least 8.1 to have it work. However, Adobe will not provide support for problems you run into, though folks here might try to offer solutions. I have not heard anyone try it yet. Several were successful with Win7, though I only heard of 2 with Win7, 64-bit who claimed success.
However, you might find that AA XI provides better performance (assuming you do get AA 8 to work) and you probably should consider the upgrade. -
Preview for Developers update for Windows Phone 8.1.1
Start your phone updates
Microsoft has just pushed out Windows Phone 8.1.1 for those participating in the Preview Developer Program.
It's believed to fix the following issues:
lingering issues with those not getting the Lumia Cyan firmware
errors in installing
and even a fix for HTC users
Source: Microsoft rolling out Preview for Developers update for Windows Phone 8.1.1 | Windows Phone Centralprimortal wrote:
This bit is interesting from the Windows Phone Blog in regards to this update.
Remember, while we are releasing Lumia Cyan for a large number of phones, there still may be some of you that are not offered the Cyan update, yet. However, as explained in the blog, we’ll continue to add more Lumia devices every couple of days over the coming weeks until we bring everyone up to the latest.
Source: New Update for Windows Phone Preview for Developers
That Text is no where to be found in that blog post. Anywhere. -
ITunes Update for Windows Vista 64 bit
Does anybody know when this is going to be released. I got an iPhone and can't sync it with the latest version of Windows Vista. The friendly staff at AT&T forgot to tell me that I would not be able to use my iPhone until iTunes came out with an update for Windows Vista.
Thank You.The below post should answer your question
http://discussions.apple.com/message.jspa?messageID=5526734 -
Update for Windows 7 (32-bit) (KB2952664) FAILED
Error Code: 80242016
During my Windows update I received the above error message while attempting the Update for Windows 7 (KB2952664).
I ran the Fixit program that was offered to me in the Help. I was not really able to identify what the exact cause of the problem is in the help however. It is not installing the update when I rerun Windows Update. Any help with this is appreciated. Thanks.Thanks toondog, I went to:
Control Panel > Programs > Programs and Features > View installed updates
in Windows 7 x64, found the failed update in the "Microsoft Windows" category (it's easier to find if you order updates by descending date) then right-click and Uninstall. It appeared to uninstall because the entry disappeared, however when I refreshed
it the entry came back. Then I went to Windows Update and it found the update and I reinstalled and this time it was successful.
It's even easier to find if you enter KB2952664 in the "Search Installed Updates" box in the upper right corner of the Installed Updates window.
This is the only way that worked for me, although I had to do a Restart after uninstalling the update before Windows Update would let me try it again.
Toondog85's way—going through Windows Update instead of Programs and Features—didn't give me the option of uninstalling the update, but it was still basically the right solution to the problem. -
What in the world??? W8.1 Update for Windows Defender fails over and over... tried cleanup, etc. Microsoft guys, what is the matter with this???
Anyone? help please if you solved this...
Definition Update for Windows Defender - KB2267602 (Definition 1.165.4030.0)
Installation date: 2/13/2014 8:40 PM
Installation status: Failed
Error details: Code 80070002
Update type: Important
Install this update to revise the definition files that are used to detect viruses, spyware, and other potentially unwanted software. Once you have installed this item, it cannot be removed.
More information:
http://www.microsoft.com/athome/security/spyware/software/about/overview.mspx
Help and Support:
http://go.microsoft.com/fwlink/?LinkId=52661
vatW8.1 Update for Windows Defender fails over and over... tried cleanup, etc.
Anyone? help please if you solved this...
By the time you read this, a new Definition Update is already available, and this issue should no longer be relevant. However, the simple fix is this: DECLINE the annoying update and wait for the next Definition Update to be published.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Problems after installation 16.0.3 update for Windows
I propose here to report problems appeared after installation 16.0.3 Illustrator update for Windows.
As for me:
Don’t display Stray and Center Points in Outline mode;
Eyedropper+Shift works incorrectly;
Graphic Style Libraries -> Additive make disappeared Fill.Hi K,
Thank you for you reply and sorry if the information was a bit too truncated. well here goes.
I am using a MacBook Pro (3.1) 17 inch, 2.4GHz processor, 2 GB ram. I edit video using Final Cut Studio 2. i am having a problem with Final Cut Pro 6 after downloading the latest update (6.0.3). Before I downloaded the update I used to be able to export my movies on the Quicktime option of FCP (not compressor or Quicktime conversion) giving me the option to view the the movie while in an FCP Project. The viewer used to scale the exported video to 16.9 (720 by 576 anamorphic), it no longer does this, instead playing it in 4.3. I have tried exporting both from the time line and the canvas but the viewer will only preview in 4.3. As I want to see it in 16.9 because that is what the movie was made in, captured and edited in. The original settings have not changed but there seems to be this annoying problem.
I hope that is enough detail
Ivan -
I've been going around in circles for hours now trying to figure this out, but I now officially give up. I have no idea how to fix this. So I came here before I chuck my laptop across the room.
Whenever I try to install the definition update, it fails and says "error found. Code 80070002 windows update encountered an unknown error". I've tried to fix it using the
Windows Update troubleshooter, but it can't fix it. Also, tried to follow some manual fixes, but none of what they say to do exists on my computer (like files and such). Help!
I have a Sony Vaio, Windows 7 64-bit Home Premium edition.
I also installed the System Update Readiness Tool as a last ditch effort to see if it would fix it. It didn't.
Thanks for your time.Hi,
I aggree with Hetti.
In Windows 7, Windows defender only removes spyware, but to protect yourself from viruses, you still need to download antivirus software, such as Avast Antivirus.
http://blogs.msdn.com/b/securitytipstalk/archive/2014/01/16/do-i-need-anything-besides-windows-defender.aspx
To install the update for Windows Defender, i recommand you to fully exit Avast and manually install the update.
http://support.microsoft.com/kb/923159
Andy Altmann
TechNet Community Support -
Cumulative Security Update for Windows XP Service Pack 2 Warning!
Not sure how many of you guys remember the problems associated with the Windows XP Service Pack 2 when it was first released, but the latest Cumulative Security patch completely disabled my Plextor 708A DVD drive and locked up Windows Explorer.
Here is the problem patch:
o Cumulative Security Update for Internet Explorer for Windows XP Service Pack 2 (KB883939)
It caused my Plextor 708A to give off two blinking Amber lights, which according to Plextor indicates the drive is defective. Plextor actually tells you to get a RMA ticket and to return the drive. Luckily I found it odd that my DVD drive became defective after I installed the latest windows update and tried uninstalling the 'fixes' before going that route. Fortunately, removal of one of the 'fixes' solved my problem.
If you find that your DVD or CD Player no longer works after doing a windows update, then do the following:
o Go to Control Panel
o Select Add Remove Programs
o Scroll to the bottom and select Security Update for Windows XP (KB883939)
o Click 'Remove'
o Restart your computer
I might not have the latest security fix right now, but at least my computer is running.
Stu: Can you report this to MSI and have them get in touch with M$?i will, if this is a problem affecting a lot of users.
has anyone else experienced this problem?
Maybe you are looking for
-
My old computer crashed and I purchased a new on with windows vista on it. I tried to transfer my songs purchased on itunes to the new computer from my ipod but it would only transfer a little more than half of them and it won't allow me to add my ju
-
Problems with ListViews Drag and Drop
I'm surprised that there isn't an Active X control that can do this more easily? Would be curious to find out if there is - although we aren't really embracing the use of them within Forte because it locks you into the Microsoft arena. --------------
-
Suddenly I am unable to access Safari when I click the icon. Read book and followed basic troubleshooting: reinstall Mac OS X & applications. Icon there but still cannot access. Error code reads: cannot be openned b/c problem; deals w/system config.
-
Two config material in sales order?
Hi All In variant Configuration , in sales order i created two line items with the same material , but the character values are diff. When i run the md04 it working fine with the item 10 , but for the item 20 no value related material has not been p
-
Gmail on Firefox - how to select all?
I am using Gmail on Firefox. On Gmail direct, there is a check box on top of search box results that allows you to select all, but there is no such check box on the Firefox version. There are only individual check boxes next to each message selection