Acrobat 7 and Vista

I have read a number of reports of the problems people were having with acrobat 7 pro and vista so I thought I would report how I got it to work for me. My hardware is a new notebook running Vista Home Premium SP1 with all current updates. After installing off the original disk acrobat 7.0 would not start. I went to adobes site and downloaded the 7.09 update but when I ran it I got the message it could not find a program to update. Then I downloaded update 7.05 and it installed fine and the program worked without a hitch so I made a restore point in Vista. Acrobat started to update itself to version 7.10 and I decided to let it to see what would happen. After the update it opened fine and all the features I normally use work fine. Must say despite all my apprehensions Vista seems to be working fine for me. All my old programs are working including lots of specialty programs( marking, testing, cad) even my 7 year old version of autocad is working fine in wind 2000 compatibility mode. Crossing my fingers and hoping this continues.
topryan

It may seem to work fine, but you will likely have problems along the way. The activation issue may be that you did not deactivate it from the previous systems before you installed VISTA. If that is the case, you may be out of install rights. If you still have the older systems, deactivate Acrobat there.
As mentioned, you may still not have luck with AA7 on VISTA. Acrobat may open fine, but most likely you will have to use the print to file feature when printing to the Adobe PDF printer (if it even installs - in that case use a PS printer and possibly rename it to Adobe PDF). You would then have to open the file in Distiller to get a PDF. To automate the process a bit in such a case, you can set the printer port to file, rather than PDF Port. If it works without such changes, you are lucky. Even with the changes it may not work correctly. Good luck.

Similar Messages

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

Hi joe beischel,
Kindly post this query in Acrobat forums:Acrobat
Regards,
Florence

Acrobat 7.0 Pro and VISTA

Just FYI,
Acrobat 7.0 Pro does not work with Vista. It will continually ask for re-activation even though it is activated the first (and subsequent) times.
This is not a complaint. Acro 7.0 preceded (and was never intended for) Vista. Just thought it would be helpful to have this fact clear (to avoid calling customer support and being told on the SECOND call that this is the case).
Will definitely upgrade to Acro 8 or 9. Acrobat is an invaluable tool.

You may get a few responses. A few have apparently been successful with AA7 and VISTA, but I am not sure of the stability of such installations. You might want to provide a few more details of what you have run into, installation process, and such, so that they might answer. I think your data may be adequate, but if you have more it would help. The upgrade is likely a good idea in any case.

Conflict between Adobe Acrobat and Adobe Reader and how I fixed it

For the past 5 years, I have owned Adobe Acrobat version 9, and recently installed Adobe Reader as well (version 10.7). I was previously able to set up Firefox to use Acrobat to display PDF files in the browser without downloading them, but I recently noticed that this was no longer the case. Instead, every PDF file I tried to view was being downloaded instead. I came here to find a solution, and discovered that many other people are having similar problems. I followed the instructions given here (https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them), but found that they were actually UNhelpful. They tell you to turn off the Firefox PDF viewer by editing about:config to disable the file pdfs.js, which is the native Firefox PDF viewer-- but that will cause the PDF file type to disappear from the Tools/Options dialog, so you can't assign it to another program (whether Adobe or anything else). This makes it impossible to assign the Adobe plugin to open PDF files. I did figure out a solution on my own, and wanted to post it here to help other users with the same problem.
I ultimately learned, through trial and error and a lot of research both here and on Adobe's website, that the root cause of my problem was a conflict in Firefox between Acrobat and Reader. I was able to solve it by upgrading Acrobat, getting rid of Reader and enabling the Firefox PDF viewer so that I could assign the PDF file type to the Acrobat plugin within Firefox. Here are the details of my problem and how I solved it:
1. Acrobat and Reader conflict with each other in Firefox, but this isn't totally Firefox's fault. It's mostly Adobe's fault, and they pretty much admit it. Specifically, they say that Acrobat and Reader can't coexist on the same machine unless both are version 10 or higher. They tell you to upgrade to solve the problem--but I can't afford to pay for a new version of Acrobat. If you have to keep Acrobat 9.x, Adobe says the lowest version of Reader that will work with it is Reader 11. I couldn't upgrade to this because I have Vista, and Adobe hasn't issued Reader 11 for Vista (and doesn't plan to). I did cheat and download the Win 7 version of Reader 11, but it didn't help.
2. If you have both Acrobat and Reader, you can choose a setting in Reader to make it the default PDF handler--but Firefox ignores this information and defaults to Acrobat no matter what. (This is the part we can blame Firefox for.) If you have a version of Acrobat which is below 9.5.5, Firefox actually blocks it as a security risk, so the plugin won't work at all, regardless of version number. That's why PDFs are being downloaded through your standalone program instead of being displayed in the browser. If you want to view PDFs in Firefox and keep Acrobat on your computer, you MUST upgrade Acrobat to version 9.5.5 or above.
3. Unless you can upgrade Acrobat to at least 10.x, GET RID OF READER. As long as you can access Acrobat 9.5.5, it will work fine in Firefox and there's no need for Reader. I never used to have Reader myself, only Acrobat, but it must have been downloaded automatically when Acrobat was blocked by Firefox (which I didn't even realize).
4. IF YOU NEED TO UPGRADE ACROBAT 9.X TO 9.5.5, YOUR LAST CHANCE IS TODAY--6/26/13. Adobe has announced that today is the "end of life" for the Acrobat 9.x platform, and all support and upgrades will cease after today.
When I searched for updates by going to Adobe's website, it told me there were none available--but when I checked for them FROM THE ACROBAT PROGRAM ITSELF (Help/Check for updates), I was offered a 300 MB upgrade that took me all the way from version 9.0 to 9.5.5 in one step. (It did take a very long time to download and install.)
5. Once you have Acrobat 9.5.5, this is how to enable it in Firefox:
a. INSIDE ACROBAT, set your preference for "Internet" to "view PDF files in browser." Close Acrobat. Close Firefox if it's already open.
b. Reopen Firefox. Check Tools/Add-Ons/Plugins to make sure the Acrobat plugin is there. Enable it if disabled. Close Firefox.
If the plugin isn't there at all, repair your Acrobat installation through Control Panel. Then return to Firefox and enable it. Close Firefox.
c. Reopen Firefox again. Go to Tools/Options and check the list of file types. For the names that contain "Adobe" and "Acrobat," Acrobat should be set as the default program to open them. Select it from the drop-down list if it's not. Continue to scroll through the alphabetical list--you should see another entry called Portable Document Format. If it's there, the default will be "preview in Firefox." You should be able to change this to "Acrobat (in Firefox)" using the drop-down menu. Do NOT pick the option that says "Acrobat"--this is the standalone program and will cause your PDFs to be downloaded.
If you don't see "Acrobat (in Firefox)" as an option, this means your plugin is not working. Go back and fix it using the instructions above (including repair of Acrobat if necessary).
d. If you don't see a file type for "Portable Document Format" at all, that means the Firefox PDF viewer is disabled. You must enable it by editing the about:config file. To see it, type about:config in the Firefox address bar. You will get a warning message--just click OK and keep going.
This file is a long list of statements in alphabetical order. LOOK FOR A STATEMENT THAT SAYS "pdfjs.disabled" with a Boolean value of "true." Select this statement and right-click. A context menu will offer you choices including "Toggle." Select that one, which will change the Boolean value to "false." Exit about:config. Close Firefox.
e. Now return to Tools/Options, scroll through the list of file types, and you should see "Portable Document Format." Select "Acrobat (in Firefox)" as in the instructions above. Close Firefox.
f. The first time you try to open a PDF file in Firefox, you may get a dialog box which offers you choices of how to open the file. The first will be Acrobat, but DON'T CHOOSE THAT--it will cause your PDF to download. Instead, go to the choice that says "Open as application/pdf." You don't need to change the program that opens this file type, because your settings are already correct. Your PDF should open in the browser, with the full-featured Acrobat menu (including the option of editing or saving the file).
I hope other users can benefit from the truly painful experience I had figuring all of this out. Good luck.

Since it doesn't seem like you are looking for support, locking this thread.

Acrobat 9/Vista - Can only covert Office 2007 documents to PDF once before having to stop acrtoray.e

I have Acrobat 9 Pro Extended, Office 2007, and Vista Ultimate 64 with UAC off. I can only convert from an Office document (.doc, .xls) to PDF once before getting problems, after which I have to close the acrotray.exe process in Task Manager (or restart Vista) to get it to work again.
After I successfully convert an Office document, on future attempts it says "Adobe Acrobat is not activated. Cannot create the PDF file."
If in Word I instead choose to Print to Adobe PDF, it says "Word is preparing to background print the document:" but then hangs and I have to stop the program. An error box then says "Adobe PDF creation cannot continue because Acrobat is not activated."
After ending the acrotray.exe process or restarting the computer it works again, but like before only one time. Opening Acrobat and choosing Repair Acrobat Installation doesn't fix the problem unless I restart, which would fix it anyway.
Is there a permanent solution to this issue?

I Also have the same Problem
          When u try to convert word/XLS/TXT to PDF i get this error and when i kill the acrotray process from taskmanager i am able to generate the PDF.
Can anyone of u please let me know what is the problem about and how to solve it.
Error Message:
Error Code:10012
Error Message: ALC-PDG-010-012-PDFMaker reported an error while printing the document.
[5/27/09 12:36:56:665 CDT] 000000f6 SibMessage    W   [:] CWSIV0775W: The creation of a connection for destination adobe_PEDCommandQueue on bus IDP_JMS_Bus for endpoint activation [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@5e9a5e9a <active=true> <connections={}> <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@f96523e1> <endpointConfiguration=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$JmsJcaEndp ointConfigurationImpl@593109850 <JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@74 8432540 <userName=null> <password=null> <xaRecoveryAlias=null> <destination=queue://adobe_PEDCommandQueue?deliveryMode=Persistent&busName=IDP_JMS_Bus> <durableSubscriptionHome=null> <destinationType=javax.jms.Queue> <messageSelector=null> <acknowledgeMode=Auto-acknowledge> <subscriptionDurability=NonDurable> <shareDurableSubscriptions=InCluster> <clientId=null> <subscriptionName=null> <maxBatchSize=1> <maxConcurrency=10> <busName=IDP_JMS_Bus> <shareDataSourceWithCMP=false> <targetTransportChain=null> <readAhead=Default> <target=null> <targetType=BusMember> <targetSignificance=Preferred>]>]> <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@5e8c5e8c> <workManager=com.ibm.ejs.j2c.work.WorkManagerImpl@61246124> <endpointMethodTransactional=false> <remoteConnection=null> <remoteDestination=true> <timer=java.util.Timer@5f045f04>] failed with exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: There are currently no messaging engines in bus IDP_JMS_Bus running. Additional failure information: CWSIT0103E: No messaging engine was found that matched the following parameters: bus=IDP_JMS_Bus, targetGroup=null, targetType=BusMember, targetSignificance=Preferred, transportChain=InboundBasicMessaging, proximity=Bus..
[5/27/09 12:36:58:290 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#fbd89dcd0f4e9e5228a3fabc6d917ced"
[5/27/09 12:36:58:290 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:36:58:290 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:36:58:352 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:36:58:509 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:36:58:571 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:36:58:618 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:36:58:665 CDT] 000000df Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#fbd89dcd0f4e9e5228a3fabc6d917ced"
[5/27/09 12:37:02:680 CDT] 000000f7 SibMessage    W   [:] CWSIV0775W: The creation of a connection for destination adobe_PECommandQueue on bus IDP_JMS_Bus for endpoint activation [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@7db87db8 <active=true> <connections={}> <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@9496c24e> <endpointConfiguration=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$JmsJcaEndp ointConfigurationImpl@1839361442 <JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@19 78299882 <userName=null> <password=null> <xaRecoveryAlias=null> <destination=queue://adobe_PECommandQueue?deliveryMode=Persistent&busName=IDP_JMS_Bus> <durableSubscriptionHome=null> <destinationType=javax.jms.Queue> <messageSelector=null> <acknowledgeMode=Auto-acknowledge> <subscriptionDurability=NonDurable> <shareDurableSubscriptions=InCluster> <clientId=null> <subscriptionName=null> <maxBatchSize=1> <maxConcurrency=10> <busName=IDP_JMS_Bus> <shareDataSourceWithCMP=false> <targetTransportChain=null> <readAhead=Default> <target=null> <targetType=BusMember> <targetSignificance=Preferred>]>]> <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@44c444c4> <workManager=com.ibm.ejs.j2c.work.WorkManagerImpl@61246124> <endpointMethodTransactional=true> <remoteConnection=null> <remoteDestination=true> <timer=java.util.Timer@15161516>] failed with exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: There are currently no messaging engines in bus IDP_JMS_Bus running. Additional failure information: CWSIT0103E: No messaging engine was found that matched the following parameters: bus=IDP_JMS_Bus, targetGroup=null, targetType=BusMember, targetSignificance=Preferred, transportChain=InboundBasicMessaging, proximity=Bus..
[5/27/09 12:37:05:836 CDT] 000000de Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#fbd89dcd0f4e9e5228a3fabc6d917ced"
[5/27/09 12:37:06:117 CDT] 000000de Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:37:08:664 CDT] 000000f8 SibMessage    W   [:] CWSIV0775W: The creation of a connection for destination adobe_JobManagerQueue on bus IDP_JMS_Bus for endpoint activation [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@72607260 <active=true> <connections={}> <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@825da81a> <endpointConfiguration=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$JmsJcaEndp ointConfigurationImpl@1914991140 <JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@10 90535680 <userName=null> <password=null> <xaRecoveryAlias=null> <destination=queue://adobe_JobManagerQueue?deliveryMode=Persistent&busName=IDP_JMS_Bus> <durableSubscriptionHome=null> <destinationType=javax.jms.Queue> <messageSelector=null> <acknowledgeMode=Auto-acknowledge> <subscriptionDurability=NonDurable> <shareDurableSubscriptions=InCluster> <clientId=null> <subscriptionName=null> <maxBatchSize=1> <maxConcurrency=10> <busName=IDP_JMS_Bus> <shareDataSourceWithCMP=false> <targetTransportChain=null> <readAhead=Default> <target=null> <targetType=BusMember> <targetSignificance=Preferred>]>]> <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@72527252> <workManager=com.ibm.ejs.j2c.work.WorkManagerImpl@61246124> <endpointMethodTransactional=false> <remoteConnection=null> <remoteDestination=true> <timer=java.util.Timer@72ca72ca>] failed with exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: There are currently no messaging engines in bus IDP_JMS_Bus running. Additional failure information: CWSIT0103E: No messaging engine was found that matched the following parameters: bus=IDP_JMS_Bus, targetGroup=null, targetType=BusMember, targetSignificance=Preferred, transportChain=InboundBasicMessaging, proximity=Bus..
[5/27/09 12:37:08:680 CDT] 000000de Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:37:08:742 CDT] 000000de Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:37:08:805 CDT] 000000de Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:37:08:883 CDT] 000000de Reference     I org.apache.xml.security.signature.Reference verify Verification successful for URI "#d72defc93c0f2a3e50d48504a433e899"
[5/27/09 12:37:08:883 CDT] 000000de GeneratePDFIm A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-000-
Job ID for the submitted createPDF job =ADITYA MARLA.doc3c729d-9ec084-189d03-d650cc-0d494f-c2c7cb
[5/27/09 12:37:08:914 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-024-ADITYA MARLA.doc: Time Job Submitted: 5/27/09 12:37 PM
[5/27/09 12:37:08:914 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-021-ADITYA MARLA.doc: PDF Settings Used: pdfg Standard 54138
[5/27/09 12:37:08:914 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-022-ADITYA MARLA.doc: Security Settings Used: No Security
[5/27/09 12:37:08:914 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-023-ADITYA MARLA.doc: FileType Settings Used: Standard
[5/27/09 12:37:08:914 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-017-ADITYA MARLA.doc: Job Submitted by User: administrator
[5/27/09 12:37:08:945 CDT] 00000111 WordToPDFConv A com.adobe.service.ProcessResource$ManagerImpl logJdk ALC-PDG-001-001-Begin processing job : C:\Documents and Settings\wasadmin\Local Settings\Temp\pdfg-wasadmin\20\1203-c513d2-9bf144-d0a9f2-f75636-094cdc\native-in.doc
[5/27/09 12:37:12:789 CDT] 00000111 WordToPDFConv A com.adobe.service.ProcessResource$ManagerImpl logJdk ALC-PDG-001-000-Calling function to clean registrys Resiliency entry
[5/27/09 12:37:12:804 CDT] 000000e5 WordToPDFConv A com.adobe.service.ProcessResource$ManagerImpl logJdk ALC-PDG-001-000-The system cannot find the file specified.
[5/27/09 12:37:12:836 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-028-ADITYA MARLA.doc: Job Completion Status: Failed
[5/27/09 12:37:12:836 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-025-ADITYA MARLA.doc: Time Job Completed: 5/27/09 12:37 PM
[5/27/09 12:37:12:836 CDT] 000000de BMCCaller     A com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-026-ADITYA MARLA.doc: Time of Job Execution: 3,922 ms
[5/27/09 12:37:12:836 CDT] 000000de GeneratePDFIm E com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-000-ALC-PDG-010-012-PDFMaker reported an error while printing the document.
[5/27/09 12:37:12:836 CDT] 000000de CreatePDFAct E com.adobe.pdfg.logging.PDFGLogger log ALC-PDG-001-000-Invocation error.
[5/27/09 12:37:12:836 CDT] 000000de CreatePDFAct E com.adobe.pdfg.logging.PDFGLogger log TRAS0014I: The following exception was logged ALC-DSC-003-000: com.adobe.idp.dsc.DSCInvocationException: Invocation error.
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:152)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doBMT(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:132)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:91)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 5)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.aes.web.create.CreatePDFAct.createPDF(CreatePDFAct.java:383)
at com.adobe.aes.web.create.CreatePDFAct.createPDF2(CreatePDFAct.java:402)
at com.adobe.aes.web.create.CreatePDFAct.execute(CreatePDFAct.java:174)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at com.adobe.aes.web.AesActionServlet.service(AesActionServlet.java:63)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1096)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1037)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.adobe.idp.um.auth.filter.AuthenticationFilter.doFilter(AuthenticationFilter.java:154)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:832)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:679)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:566)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:748)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:119)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:458)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:387)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:267)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConn ectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitia lReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
Caused by: ALC-PDG-10012-000: com.adobe.livecycle.generatepdf.client.ConversionException: ALC-PDG-010-012-PDFMaker reported an error while printing the document.
at com.adobe.pdfg.BMCCaller.checkResult(BMCCaller.java:358)
at com.adobe.pdfg.Native2PdfCaller.callNativeBMC(Native2PdfCaller.java:788)
at com.adobe.pdfg.Native2PdfCaller.createPDF(Native2PdfCaller.java:298)
at com.adobe.pdfg.GeneratePDFImpl.createPDFCommon(GeneratePDFImpl.java:342)
at com.adobe.pdfg.GeneratePDFImpl.createPDF(GeneratePDFImpl.java:172)
at sun.reflect.GeneratedMethodAccessor294.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:618)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
... 60 more
[5/27/09 12:37:14:695 CDT] 000000f9 SibMessage    W   [:] CWSIV0775W: The creation of a connection for destination Default.Topic.Space on bus IDP_JMS_Bus for endpoint activation [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@7cf87cf8 <active=true> <connections={}> <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@7aff2ec6> <endpointConfiguration=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$JmsJcaEndp ointConfigurationImpl@2092727484 <JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@13 28959286 <userName=null> <password=null> <xaRecoveryAlias=null> <destination=topic://adobe_TaskEventTopic?busName=IDP_JMS_Bus> <durableSubscriptionHome=null> <destinationType=javax.jms.Topic> <messageSelector=null> <acknowledgeMode=Auto-acknowledge> <subscriptionDurability=NonDurable> <shareDurableSubscriptions=InCluster> <clientId=null> <subscriptionName=null> <maxBatchSize=1> <maxConcurrency=10> <busName=IDP_JMS_Bus> <shareDataSourceWithCMP=false> <targetTransportChain=null> <readAhead=Default> <target=null> <targetType=BusMember> <targetSignificance=Preferred>]>]> <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@7cea7cea> <workManager=com.ibm.ejs.j2c.work.WorkManagerImpl@61246124> <endpointMethodTransactional=false> <remoteConnection=null> <remoteDestination=true> <timer=java.util.Timer@7d627d62>] failed with exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: There are currently no messaging engines in bus IDP_JMS_Bus running. Additional failure information: CWSIT0103E: No messaging engine was found that matched the following parameters: bus=IDP_JMS_Bus, targetGroup=null, targetType=BusMember, targetSignificance=Preferred, transportChain=InboundBasicMessaging, proximity=Bus..
Thanks and Regards
Aditya Marla

Acrobat and Reader XI freeze 3 secs after opening (force close needed). Win 8.1. Restart usually removes problem, sometimes repair.

Please help.
Running Adobe Acrobat and reader XI ( latest versions). PC is Lenovo ThinkPad 440 S. Don't think I've got any plug-ins that are affecting this, but Dragon NaturallySpeaking is installed on PC, and I know this sometimes causes problems with some programs.
I can uninstall and reinstall either of the programs, and sometimes after a day or a week the problem returns. Restarting the computer will usually cause it to disappear for awhile and then it returns. The freeze is always the same, about three seconds after opening a document, it freezes and I have to close the program and restart the computer if I want the program to work again. I've tried switching off the security settings as suggested a number of websites, and this sometimes seems to help, but the problem nevertheless returns. I've got Acrobat on trial, and would like to buy, but I'm not going to do so and as this problem can be solved.
I've tried installing the programs multiple times, both clean install and repair and this doesn't stop the problem from happening, and it's happened over the two latest updates to the programme with no success. Out of interest, I've also noticed it doesn't always save my preferences between opening the program (e.g. page view preferences).
Many thanks for any input,
Jason Anderson

Hi Jason,
I would recommend you to do a selected startup and then enable the programs one by one to isolate which program might be causing this.
Please refer the KB: Restart Windows in a modified mode | Windows 7, Vista for selective startup of Windows.
Regards,
Anoop

Scanning with Kodak i65 and Vista

Hi,
I am having trouble 'Creating a PDF from Scanner' with a Kodak i65 scanner. Everytime I attempt to scan a document with Acrobat 8 and Vista I receive a scanning failed message. The 'Scan Validation Tool' scans documents fine to the .tiff format however when I try to scan documents with Acrobat 8 it doesn't work and I get 'Scanning failed.'
Any help would be greatly appreciated.
Thanks,
Andrew

I have the exact same problem. Except I have the Kodak i30 Scanner. I have Adobe Acrobat Professional 8.1.2 (with the Security Update 1 installed).
In the past, I ran the following configurations on an older computer with no problems:
- Windows XP & Adobe Acrobat Professional 6.0 (with all of its various updates)
- Windows Vista & Adobe Acrobat Professional 6.0 (with all of its various updates)
- Windows Vista & Adobe Acrobat Professional 8.1.2 (with the Security Update 1 installed)
However, when I built a new computer, installed Windows Vista Ultimate, installed the Kodak i30 Scanner, I receive a "Scanning failed." error everytime I try to scan directly into Acrobat.
BTW, I HAVE "tried with latest Scan Validation Tool and firmware update from Kodak site." Updating the SVT and firmware neither helped nor hurt.
Has anyone had a successful fix to this issue?

FrameMaker 8 and WMFs (and Vista)

I don't have any clue what is going on but I have been using FrameMaker 8 since the start and as soon as I upgraded to Vista SP1 I've seen something that doesn't make sense.
A little history...
For vector drawings I (like most of you) use Microsoft Visio 2003 for vector drawings. The best consistent quality output I've found without rasterizing is to export as WMF (not EMF) and import as a File relative WMF file. Without any need for scaling, under Windows XP SP2 all vector art rendered successfully.
The issue...
I recently updated to FM 8 Build 273 (that WAS interesting, jeez) and also upgraded to Windows Vista Ultimate SP1. Everything runs quite well (contrary to other forum discussions) but the WMF graphics are too large by about 20%. I have to know scale everything to 80%. Crap. What is really odd is that the original artwork is rendered fine under FM 8 and if I simply re-export under Visio again (under Windows Vista) and re-import it in FM 8 I have to re-scale the images between 75 and 80%.
Is anyone else seeing this? It almost feels like Windows Vista has changed its WMF format. In fact I did a file compare and the files (generated under Windows XP SP2 compared to Windows Vista Ultimate SP1) are exactly the same EXCEPT some of the content is different! (I think EMF gives the same problem.)
thanks,
Ken Whitaker
Seattle, WA
"the original software maniac"

Ken,
The WMF format is not the best for use in FM as some information is
not properly carried across (such as fonts, curves are not truly
smooth mathematical entities, and so on). Visio's EPS export has
always tended to be flawed, so the best quality for publishing is to
create a PDF from Visio and then either crop and export an EPS from
Acrobat or use the PDF directly in FM. I create the EPS in Acrobat and
have never had any problems.

How to print off Web to Acrobat and not Reader?

Hello,
I have Adobe Acrobat Standard X (10.1.8) and Adobe Reader 9.5.5 installed on my PC (Vista Home Premium x64).
When I go to print a page off the Web to PDF, the resulting document currently gets displayed in Reader rather than Acrobat. I would prefer that the new document show up in Acrobat instead, so that I can delete any unnecessary pages (article comments, ads, etc.).
Is there any way to make it so that when a new PDF is created from the Web, the result shows up in Acrobat and not Reader? And if so, then how?
In case it makes a difference in how you answer-- I would like to keep Reader as the default when opening an existing PDF to read it.
Thank you.
Message was edited by: jamadr: more information

There is really no good reason to have both Reader and Acrobat installed on the same system since Acrobat does everything Reader does and much more.
For what it's worth, Dov, over here in Mac-land, I find it really really useful to have both Reader and Professional installed. I find the casual reading experience in Reader to be much more convenient, and I'm much less likely to inadvertantly alter a file I only wish to read. By default the toolbars consume less screen real estate, which I find useful. Also for workflow reasons, I can have 20 PDFs open in Reader and 1 or 2 open in Professional, and can more easily keep them straight. I am also under the impression that Reader is less resource-intensive in terms of memory footprint.
Oh, and, of course, I find it useful to use Reader 10 because of unresolved bizarre performance problems with Reader 11 (reported to Adobe and that got some stillborn developer attention), while still using Pro 11 for editing and other pro-type tasks.
(On the gripping hand, when I want to do something like OCR a page I am reading in Reader so I can copy-paste it elsewhere, it is annoying to have to then open it in Pro.)
This is basically the opposite of your advice .
I'm under the impression this is more viable on the Mac than Windows though? Or perhaps it is a disaster waiting to happen.

6.0 and Vista

I need to install a 6.0 version of adobe acrobat on vista, but it tells me it is not finding a qualified product though the disc is in? Is it too old and is there a solution?

I have no clue. The first version certified for VISTA was 8.1.3 or so. A few folks have reported success with AA7. I have heard of no earlier versions working on VISTA and the canned answer from Adobe will be to upgrade. You are kind of on your own, though folks may be willing to comment on things as you go - based on any experiments you try. Some of them will sound like they work for Adobe and tell you to upgrade also. If you were talking about VISTA X64, I would suggest the upgrade also.

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Problem with standby and Vista

Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scw

well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

Firefox mage quality and resolution was superb when I used XP and Vista. Now that I have Windows 7, however (with the Firefox 3.6.3 version), the image quality and resolution is poor. Please help me!

I am using the Firefox 3.6.3 version with my new Windows 7 operating system. When I used all the previous Firefox versions in my XP and Vista operating systems, image quality and resolution was excellent! However, now that I have upgraded to Windows 7 and Firefox 3.6.3, the image quality and resolution is poor (unacceptable for downloading purposes).
== This happened ==
Every time Firefox opened
== I first activated my new computer and installed the Firefox 3.6.3.

All my images are pixelated in firefox 3.6.3
http://www.dcgdcreative.com
Not only on my site but on most sites I view.
The issue is not solved by resetting the zoom text view (ctrl+0)
The issue is not resolved by starting in safemode with add-ons disabled
The problem seems to only affect .jpeg files and only on Windows 7 on my desktop; as I have viewed several sites using windows XP with my laptop, no issues.
I had the same issue with IE8 and was able to fix the problem with by setting up the compatibility view for all sites. Issue fixed no problems at all. But nothing similar for firefox?
Whats the deal?

Using VMWare Fusion and Vista for NetFlix Watch Now

Hi, I have installed Fusion and Vista in order to use NetFlix's Watch Now feature on my MBA. The installation was easy and Vista seems to be working fine. However, I can't get the Watch Now movie going. The film will start (after NetFlix determines my internet speed, etc.) and alternate between play and pause. Has anyone used this combination with success? Would a downgrade to XP work better? Or I should just use Boot Camp? Thanks.

I've used WinXP with Fusion on a MacMini and it was fine (but faster in BootCamp). I'm currently running Vista Business on a MacBook Pro in Parallels and while it isn't slow, it certainly is slower than in BootCamp. I expect Fusion would run Vista a bit faster - Fusion does tend to be a bit faster than Parallels but Parallels seems to get along better than Fusion with one of the applications I'm using.
There are advantages to BootCamp and BC isn't incompatible with virtualization. I suggest that you go ahead and install Vista in BootCamp. If you haven't already bought Fusion, download the demo and see how it runs using the BootCamp installation and compare that to BootCamp itself. Then decide.

P1006 - networked with XP and VIsta-64 not printing more than 2 pages

Hello - I have a dilemma with my HP P1006. I have the printer directly plugged in (USB) with my XP (32bit) PC. I have a Vista-64 PC networked with it. Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless). My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC? I CAN print more than two pages with items opened in the XP-32.
Things I've done:
1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
2 - marked the printer as "sharing" on the XP-32.
3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
Things I perplexed about:
1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC? Why?
Any thoughts on this situation? Any suggestions are greatly appreciate.
Thank you - Jane.

Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks

Acrobat 7 and Vista

Similar Messages

Maybe you are looking for