Acrobat 7 Pro and PDF Options

Acrobat 7 Pro works fine but the PDF Options of the PDF Printer doesn't.
It says that: This panel is not compatible with your computer.
I can still print to PDF but how do I set the PDF options such as High Quality, Small File Size, etc...

It sounds like you need a Universal Binary version of a preference pane. If there's none available now, you'll just have to wait until one becomes available.

Similar Messages

I have a serious malfunction of Acrobat Pro and PDF document viewer.

I have a serious malfunction of Acrobat Pro and PDF document viewer. with monthly subscription. Side scroll bar to review the document works desperately slow, and it is very annoying to work under these conditions. Please no solution?It yosemite my OSX system and retina macbook pro in January 2015 16GB RAM. Someone can help me please?
thanks
Bruno

Dear Sukritd,
The versión is Acrobat Pro Document Cloud subscription (anual)
The version is updated.
Noting to repair, the system is 100% running.
The problem in the scroll page in all kind of pdf files.
Thanks.
Bruno
El 2/5/2015, a las 13:45, sukritd15 <[email protected]> escribió:
I have a serious malfunction of Acrobat Pro and PDF document viewer.
created by sukritd15 <https://forums.adobe.com/people/sukritd15> in Acrobat Installation & Update Issues - View the full discussion <https://forums.adobe.com/message/7504989#7504989>
Hi Bruno ,
Could you please verify the Acrobat version you are using is the latest Acrobat DC or some older version ?
Does this happen with any particular PDF file or all the documents ?
If you haven' tried repairing your Acrobat ,please try the same and see if that helps .
For repairing Acrobat Launch Acrobat>Navigate to Help> Repair Acrobat Installation .
If that does not work you could probably uninstall the software and try downloading it again and see if that fixes the issue .
Let us know how it goes .
Regards
Sukrit Dhingra
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7504989#7504989 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7504989#7504989
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Acrobat Installation & Update Issues by email <mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

I am using Adobe Acrobat Pro and want to put a watermark on a pdf document I have opened. How do I do this? Thank you

I am using Adobe Acrobat Pro and want to put a watermark on a pdf document I have opened. How do I do this? Thank you

I don’t have a tools menu?
Crystal Scott
Chartered Accountant
               Associated Business Advisors Limited
                Chartered Accountants
                P O Box 46, Orewa 0946
                Level 1, 178 Hibiscus Coast Highway, Red Beach 0932
                Ph (09) 426 8488    Fax (09) 426 8486 www.aba.org.nz<http://www.aba.org.nz>   [email protected]<mailto:[email protected]>

Hi how do I unistall the Adobe downlaod assistant from MacBook Pro? I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

Hi how do I unistall the Adobe downlaod assistant from MacBook Pro? I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

AMelie Eliabeth the Adobe Download Assistant can be dragged to your trash can. There is no separate uninstaller or any other application files to remove.

Ive just purchased Adobe Acrobat Pro and when i pdf a Revit file all text is unreadable. If i do it on a free pdf as Cube i dont have the problem. Whats happening and have i wasted my money

ive just purchased Adobe Acrobat Pro and when i pdf a Revit file all text is unreadable. If i do it on a free pdf as Cube i dont have the problem.

Hi michaele,
What is the extension of the revit file you converted to pdf?
Regards,
Rave

I've signed up for a subscription to acrobat pro and successfully download 2 days ago. Now when I try to open pdf it asks if I want to sign up again and will not allow me to open the document.

I've signed up for a subscription to acrobat pro and successfully download 2 days ago. Now when I try to open pdf it asks if I want to sign up again and will not allow me to open the document. Can anyone give me assistance?

Hi Mbs@adobe,
It sounds to me like you're trying to open a PDF via one of the Acrobat online services, not via Acrobat. Did you install the file that you downloaded after you signed up? Once you do, Acrobat will be installed on your computer, and you can run it locally (you don't access an Acrobat Pro subscription via the web--it works just like a version of Acrobat that you might purchase from the Adobe Store, or a large retailer).
Then, you'll open the Acrobat application from your desktop and choose File > Open to open your PDF file.
Please let us know how it goes.
Best,
Sara

Fillable form created with Acrobat Pro and sent to iPad by email.

I Create a Fillable form in Acrobat Pro and emailed it to an iPad. I loaded the PDF into Acrobat Reader for iOS. The file is opened, all fields filled and then it is emailed. So far so good. I then exit reader iOS. Later when I come back in and open the file the fields are still filled. If I do this same process on a windows PC Acrobat reader functions exactly the same but will not save the data in the form when the application is exited. This is exactly what I want. How do I get Reader iOS to perform in this manner? It is imperative that the fields in this form be empty every time I open it on the iPad.
THanks

If I open your Form with Reader XI, modify it, then close it, I am prompted to Save. If I select “Don’t Save”, then, of course, the modification is not saved. If I select “Save”, the modification is saved. So it does not appear that any logic has been embedded into the form that clears the modifications prior to Save. Its possible that older versions of Reader do not permit Save, however, a user using the current version of Reader: Reader XI would need to be trained to select the “Don’t Save” button for your workflow to be valid.
With the Mobile Reader, save is implicit. So there is no prompt to Save on close. The modifications are saved automatically.
If you want to start with a reset form each time it is opened, there are a couple alternatives:
Users can duplicate the unfilled form and work with the duplicate each time, thereby leaving the original in its unfilled state.
You can embed some instructions into the form that clear its contents on form open. Note that with this option, the prior content (pre-clear) will still be in the file even though it is not presented to the user. This would be a problem if multiple users were using the same device and the form content were sensitive.
I’ve sent you a version of your form with option 2. implemented that you can try.
Darrell

Adobe Acrobat Pro Extended | Print Option | Enable Flash Object Issue

Hi,
We are facing some problems with Adobe Acrobat Pro Extended Print Option.
We had a requirement to embed interactive Flash graphs in the PDF file, user will interact with these graphs and whatever graph he plotted, the data for it will be saved in PDF text field, so that on the next launch we can fetch the data to the flash from PDF text fields, so that user can see what changes he did last time. This works great, we are able to successfully comminicate from PDF to flash and then from Flash to PDF.
Please note that, PDF can have multiple graphs on different pages.
The issue we are facing is when we interact with the graphs and then try to print the PDF, in that case only the currently active graph or flash file (The page on which user is currently on) will be seen enabled in the print, the graphs on the other pages, which are not currently visible are seen in disabled state hence the data on it does not get printed.
We have also used the "RMA.activated = true;" command, still no success. Please refer to the screen shots below to understand the issue in more detail..
Flash Embed Options:
In the Print Option, it looks disabled:
The required/desired output is as follows:
We want all Graphs to get printed in enabled state and with the data user had entered. Please do let me know, if there is any workaround to achive this functionality.
Thanks,
Ajit Danve
Sr Developer
Aptara, Pune.

Which version. I think it is a minimum of AA9.2 that is needed for X64. Anyway, you should probably either open Acrobat and do the update (help menu) or download all of the updates from Adobe>downloads>updates and install them in order. The current version is AA9.3.4.

I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

Acrobat XI is not distributed with Designer. Designer is now a separate product. You can create forms in Acrobat as an AcroForm or using Forms Central (an online forms program). You can print the form to a new PDF and then recreate the fields in Acrobat using the recognize form fields. You will likely have to fix the form fields, but that would be the process. Generally, once a form is taken to Designer, you can't bring it back without such steps.
Designer is available with AA8 - AAX, but since is a separate product as I indicated.

Acrobat Pro and Reader fighting for Safari frameworks folder...

We manage hundreds of Macs of which most are at 10.4.8.
We have both Acrobat Pro and Reader 7.0.8 installed on all Macs.
Sometime within the last few weeks something has changed on our systems (eg: upgrading from something under 10.4.8 to 10.4.8) that is causing Acrobat Pro and Reader to fight for the Safari.app/Contents/Frameworks/ folder. This folder contains aliases to either Pro or Reader frameworks within that Acrobat app's own frameworks folder (...Acrobat Pro.app/Contents/Frameworks/)
This issue is that the end user is prompted to authenticate for either Reader or Pro to "repair itself" which it is just changing the aliases within the Safari Frameworks folder to point to their own frameworks.
If I set Preview as the default pdf viewer and then delete Acrobat Reader so that only Preview and Acrobat Pro are on the client, then it seems to work beautifully without authentication request. We would like to keep Reader on the systems though. We use Sassafras' Keyserver with a limited number of licenses for Acrobat Pro.
Has anyone else experienced this? Found a solution, etc?
Thanks!

I agree with rikbarry - I finally reinstalled Acrobat, then ran the
update to 9.4.5. The updater took nearly an hour to finish which can't
be normal, but the software appears to be the correct version now.
I work for a very small graphic design company and use an older emac
that has pretty much reached its shelf life for many apps and OS.
Could my aging computer be contributing to the problem?
Because we depend heavily on pdf workflow, I chose to reinstall
WITHOUT running the uninstaller first, as the 9.4.4 version was at
least still functioning. I was somewhat surprised that it worked, and
I am NOT looking forward to the next updater.

Need help - Print Menue in Acrobat Pro and Standard

Hello,
at first, i have to apologize for my bad englisch because I'm german.
I downloaded a Trial of Acrobat pro and there I hava an extended Print menue where I can choose individual Color Profiles.
There is an image attached.
But I don't really need the Acobat pro Features, because I need Acrobat only for Color Printing on my Printer. And it ist expensive.
So my Question to you is: Is this extended Print menue also in Acobat 9 Standard?
There is no Trial, so that I hope, that someone can help me.
Can I also set this settings in Acrobat 9 Standard?
Thank you very much for helping me with my buying decision.
Greetings from Munich
Sebastian

The Advanced Print menu in 9 Standard does not have all of the options that are in your screen shot.
Checked with a coworker who has 9 Standard, and the options are much more limited. (I have 8 Pro).
Bad news is you would need 9 Pro.
Saw this the other day; sorry for the slow answer, good luck.

Acrobat Pro and Reader 9.4.4 to 9.4.5 Updates Fail

I was unable to get a satisfying answer via phone support, and after connecting with a supervisor, I was disconnected. So here goes...
(Mac OS X 10.6.8) Adobe Updater 6 began notifying me recently that updates were available for Adobe Reader from 9.4.4 to 9.4.5, but my attempts to follow instructions resulted in Error 1301 "The update could not be applied because the Adobe Reader application contents were modified since the original installation. Please reinstall Adobe Reader and check for updates again."
Adobe updater soon notified me of the need to update my Acrobat Pro from 9.4.4 to 9.4.5, but but my attempts to follow instructions resulted in Error 1301 "The update could not be applied because the Acrobat Pro application contents were modified since the original installation. Please reinstall Acrobat Pro and check for updates again."
When Adobe updates its software, I shouldn't have to "reinstall" old software and "check for updates again" in order to install the update. Surely Adobe can offer a more direct, convenient way for customers to update their licensed software?

I agree with rikbarry - I finally reinstalled Acrobat, then ran the
update to 9.4.5. The updater took nearly an hour to finish which can't
be normal, but the software appears to be the correct version now.
I work for a very small graphic design company and use an older emac
that has pretty much reached its shelf life for many apps and OS.
Could my aging computer be contributing to the problem?
Because we depend heavily on pdf workflow, I chose to reinstall
WITHOUT running the uninstaller first, as the 9.4.4 version was at
least still functioning. I was somewhat surprised that it worked, and
I am NOT looking forward to the next updater.

Problems with opening Acrobat Pro 9 PDF files

Hi. We use Acrobat Pro 9.0.0 to convert our product documentation Word files into PDFs. During the last weeks our customers report more and more problems with opening these files. We usually deliver those on a DVD with Acrobat Reader 5 or another older version. (Please don't ask me why we're still on these old versions!) Did anyone experience similar problems with Acrobat Pro 9 PDF files and older versions of the Acrobat Reader? Does Acrobat Pro 9.0.0 work smoothly with the newest Acrobat Reader 9.1 download?
Please post your comments. Thx a lot - Kay

I would recommend distributing higher version of Reader as version 5 is just too old but looks like you can't go there.
Acrobat 9 PDFMaker and Adobe PDF printers by default create PDF 1.5 compaible files. PDF 1.5 compatible files can be opened only in Acrobat 6 and above. That's probably the reason why your customers can't see the contents.
What you can do is to change your conversion settings to produce PDF 1.4 compatible files:
- In Word, select Acrobat tab or Adobe PDF menu (depending on your version of Word), select Settings
- Select "advanced settings" in the dialog that comes up
- Choose compatibility as "Acrobat 5", PDF 1.4
IF you print to Adobe PDF printer, you'll find a similar setting in the print dialog.

My acrobat pro x pdf maker stopped working. Says my certificate has expired. how do I update it?

my acrobat pro x pdf maker stopped working. Says my certificate has expired. how do I update it?

First thing to try: check the date and time on your computer, especially the year. Let us know if that's correct.

I have Adobe Acrobat Pro and it will not open my Photoshop CS4, error code 148.3 Can you help?

I have Adobe Acrobat Pro and Windows Vista. I am unable to open my Photoshop CS4, error code 148.3. Can you help me resolve this problem?

Hi,
Please try the steps given in following article:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Regards,
Anoop

Acrobat 7 Pro and PDF Options

Similar Messages

Maybe you are looking for