Acrobat 8 creating enormous pdfs of files with illustrations in them

I have been updating some of my files and creating new pdfs using Acrobat 8 but the new files are 4 times larger in size than the old versions. This is happening when my original documents contain illustrations that have graduated tints in them ( diagrams of 3D shapes ). Using 'reduce file size' has no impact. I don't want to have to change all my illustrations.
What can I do ?

Are you using the same job.settings as your prior version? Have you changed the graphic resolution in the Adobe PDF printer?
You might also try the PDF Optimizer to see if you can reduce the graphics resolution appropriately.

Similar Messages

How do I create a PDF fillable form with adobe pro 10

How do I create a PDF fillable form with adobe pro 10

You need to open the "Tools" panel and select the "Forms" category to access all the tools for creating form fields.
TOP 10 coolest new Acrobat XI features
Form tutorials

Creating Player Problem from file with unknown content

Hi,
I need to create Player from video file with unknown content ie. from file "test.dat"
try{
MediaLocator ml = new MediaLocator(new URL("file:///D:/test.dat"));
Player p = Manager.createPlayer(ml);
catch(NoPlayerException npe){}
catch(MalformedURLException mUe){}
catch(IOException ioe){}
throws NoPlayerException
Pleeeease Help!!!

I think it should be : "file:D:/test.dat" But i do believe that it will not work with a .dat file...

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program. This problem appears after opening 4 a 5 files.

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program.
This problem appears after opening 4 a 5 files, rebooting helps another 4 a 5 times and appears again.

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

Can't open .wmf files with Illustrator

I'm using Creative Suite CS2 on a PC/Windows XP operating system.
I'm suddenly unable to launch Illustrator when I try to open a .wmf file from within Windows Explorer. Instead, I get an error message that the file itself is not a valid program (DUH!).
I also cannot open them with the "Edit Original" command in InDesign.
I have tried changing the "Opens With Program..." option in the file properties from within Windows Explorer over and over.
Oddly, I can always open .wmf files with Illustrator from within Adobe Bridge, simply by double-clicking the file. And of course, I can open them from within Illustrator by simply going to "open file".
But I really want to be able to use the "Edit Original" feature in InDesign to launch and open .wmf files in Illustrator.
Anybody know what's going on? Is this a Windows problem, an Illustrator problem or an InDesign problem? And how do I fix it?
Thanks so much for any suggestions.

I'm sorry you're having this problem with Illustrator. Would you mind reposting over on the Illustrator forums? You've posted in the AIR forum and I think you'll have better luck over there.
Thanks,
Chris

Is anyone else making svg cut files with Illustrator?

I am hoping to learn more about using Illustrator to make svg cut files. I have a cutting machine (Silhouette SD) and have been making cut files with Illustrator to use with it. I hope to, at some point, sell my files so they have to be perfect. I have run into some problems however. My paths are being read as outlines and giving me an unwanted double cut. I went on line to see if anyone else has been having this problem as well and to my surprise I found that many people are using other software packages (MTC, SCAL and Inkscape) instead. So here are my questions...
1. Is Illustrator the best software for making SVG cut files and why either way?
2. Is there a place where I can learn more about making SVG cut files with Illustrator?
Thank you in advance for any input on this topic.

Also experiencing hang on quit. For me, it follows a bug where the main viewer pane quits working (which happens occasionally when I have the gall to try to play something before it's done rendering.) Main viewer pane won't update--just shows a video frozen video frame, won't even preview items in the event browser pane. Everything else appears to be working until I play, and when the playhead gets to the unrendered segment, FCP hangs--I assume it's the same hang that happens if I try to quit instead of playing, though that's a pure guess.
iMac 2.93GHz Core i7, 8GB RAM, OSX 10.6.8

Using Acrobat to create a PDF from .swf files

I'm trying to beef up a standard powerpoint presentation into something i could have more control over, and was considering Acrobat as it would (i hoped) allow me to import .swf files from Flash. In reading up on just how flexible acrobat is though, it doesn't really seem to have all of the functionality that i want - if anyone could offer feedback on the following, that would be great in terms of clearing up the queries that i have beforehand!
essentially, i want to create a PDF file which will open fulllscreen on any machine with no toolbars, windows, additional content in the window except my PDF content. So i would have a central shape/box, which would be white, on which i have text.
I want this to open centrescreen, fullscreen, with no acrobat reader branding / navigation visible at all. Similar to the way a powerpoint document would open, however - i don't want Adobe Reader to scale my PDF at all.
I've set my canvas in flash to 1024x768, and i would want Reader to display my file at exactly 1024x768 pixels, and not scale the document up to suit different monitors. So in a way, utilising something like you could with a Flash projector file where you could set the fullscreen's "allowscale" function to "false" (keeping the document at exactly 100%) and the actual fullscreen call itself to "true" (display the document in fullscreen mode, taking over your entire monitor).
Also, i would want to specify a 'background', which is simple in flash as i can just create an oversized movie clip with whatever i want to appear in the background, and this will cover any excess area in monitors that exceed my canvas size. (So i usually create a movie clip of an image or gradient for the background that measures 2600 x 1600 pixels). Will acrobat be able to render this correctly, or is it just going to display the actual canvas size and exclude my oversized 'background' movie clip? If i use my 1024 x 768 canvas, will it clip the big background movie clip to fit?
Thanks folks... bit long winded but i just wanted to make sure i've covered the bases!

Like it or not, InDesign is a color managed application, and your files are all being managed.
You'll always have less grief if the working spaces match the output, but that isn't always possible. If you want to to convert to the profiles specified in the CSF file, choose one of the "Convert to Profile" settings and select the correct profile as the destination. You'll have two options, preserve numbers, or don't preserve numbers.
Preserving numbers will cause colors to shift, but will preserve 100% K blacks. Not preseving numbers will change the numbers to give you the closes match possible in appearance, but will royally screw up your 100% K type if going to press.

Acrobat 9: Error when PDF form submit with file attachment

Hi all,
Hope you can provide some help with my PDF form submit issue. I am getting this error "There is no PDDoc associated with this CosDoc." in Acrobat 9 (Reader and Pro) when I try to submit a PDF form with a file attachment field (the file is specified). The same PDF form works fine in Acrobat 7 or 8 (Reader and Pro) with file attachment.
If no file attachment is specified (user did not select a file) then the PDF form submits fine in acrobat 9. The form data submission format is in FDF. Same problem if I change to XFDF.
There are no differences in the problem if the PDF form is created in Acrobat 7 or Acrobat 9, the same submit issue exists in Acrobat 9 but not in the older Acrobat versions.
Is this a known issue and are there any workarounds/solutions?
Thanks.

Sounds like a bug to me. Please report it: http://www.adobe.com/support/feature.html
George

I need create a lof of files with the same password with Acrobat Standard 9

Good Morning:
I need create a lot of pdf files with password. After I put all files in a directory and with the Acrobat Writer Version 4 selected this directory and the program Acrobat automaticly put the same password in all the files. After as well, I could select files with the same password and changed the password automaticly of this files.
Now with the Acrobat Standard 9, I don't know make this taskes. My cuestion is "Can I make this things with acrobat Standard 9 or I need other version?"
Thank you

Thank you for your help
Your solution is different from the other members' opinion. ¿Is This option available in the Adobe Standard ? Because I have not found it in Adobe Standard.
Your option is with Edit > Preferences > Batch Processing Security Method "Password Security" and the option of the other members is with Advance > Batch Process.
I have tried to change some pdf files that had password with Adobe Pro, so I tried to remove the security password from the pdf files, with Advance > Batch Process.
I created a new secuence with security through the Option "Whithout Password" but when I executed the secuence, the program showed me a window with this message "OPERATION NO AVAILABLE".
¿Can you help me? I don't kown how I can remove the password of this pdfs, yet.
Thank you in advance.

How to create a pdf/a-1b with a text field

hello, I'm trying to execute a very simple task: create a pdf/a-1b containig a text field.
using Acrobat XI pro, I created a simple pdf form with 1 form field of type text , then tried to save as pdf/A-1b. The pdf is saved but the form field is removed from resulting pdf.
Here in detail the steps I made:
0) configure adobe pdf printer to save as pdf/A-1b
1) creat a test.txt with notepad
2) print using acrobat pdf printer
3) open the generated pdf with Acrobat XI
4) in 'Standards' panel I see that pdf conform
5) now go to 'Tools\Modules' and 'Modify'
6) add a textbox field
7) exit from 'Modify' mode and save
8) in 'Standards' panel I see that pdf doesn't conform.
9) I opened the preflight tool and see two errors
     a) "XMP property for a page object not predefined and no extension schema present".
     page reports the following Trigger values:
     - Extension schema is present in XMP: is not true
     - Property exists in PDF/A Standard: is not true
     b) Form field does not have an appearance dictionary
     page reports the following Trigger values:
     - Form field has an appearance dictionary: is not true
I'm quite new to Acrobat: simply downloaded the Actobat XI evaluation version, created the file and added the text field. No special settings nor other configurations was applied,
I'm wondering if someone else was able to reproduce this behavior.
thank you for any comment

First, about invalidating the PDF/A. I was told, but never had this confirmed nor tested, that editing a PDF/A will automatically cause the PDF/A status to be deleted from the file. This is because Acrobat does not know about the compatibility of every edit with every current (and future) PDF subset standard, so it is safest just to remove the indicator - if you turn off Adobe's PDF/A view mode which will prevent editing anyway.
Now, you have a problem with the signatures. Possibly a very big one. Your description "2) fill the text field with some annotations and then sign the signature field 3) save the pdf" is a little too separated. At the time a file is signed it is saved, the hash calculated, and written to the file. So signing and saving are just one action. Yet an unsigned digital signature needs, it seems to me, no appearance.
I think the solution is a simple one. Sign it, but not with a signature field. If it is PDF/A when you start it is probably PDF/A when you finish. Signature fields seem a distraction and obstacle to the important thing, signing.

Creating a pdf form that with document assembly = allowed

I am having trouble creating a print and mail pdf form that i can combine with other pdf documents. I have created a form in live cycle designer. when i try and combine it with other documents it says that the form i have created is protected and cannot be used for this command. I have not explicitly put any security on the form. I have simply created the form and saved it as a pdf. when i open the form with adobe acrobat pro and check the document properties it is always set to "document assembly = not allowed" how do i change this? i have experimented with the security settings and even using a password and allowing changes to the document but nothing seems to change the "document assembly = not allowed" i have adobe acrobat 7.0 professional with Live Cycle Designer. Please Help!

Brian,
PDF Files made with Acrobat are based on postscript.
PDF Files made with LiveCycle Designer are based on XML and are essentially wrapped in a PDF. Once modified in LiveCycle Designer, you can no longer edit the file directly in Acrobat.
They do not share the same base file type and can not be combined into a single PDF using Acrobat version 7.
One of the new features of Acrobat version 8 - is called packages. Packages allow you to combine files of different types (acrobat and designer) as well as documents with different security settings (also not previously allowed). Each file in the package maintains it's independent identity and settings, wrapped in a new pdf file.
Recommended solution: Upgrade to Acrobat 8 Professional, get the new version of designer, and the ability to use packages.
Hope this helps.
Angie Okamoto

How do I create an after effects file with an interchangeable image

Hey,
hope someone can help me, I'm using after effects to create a mp4 file, it contains a photo which has a animation super imposed ontop of it.
When the projects finished the base photo that the animation is created around could change up three times a day.
What I'm trying to work out is a way for a non technical user to just be able to upload the new photo to somewhere and for the animation to be created and returned somehow to him so that the animator doesn't have to re open and edit the affect effect project each time a new photo comes in.
Is there a way to do this built into after effects does any one know?
Thanks for any help

For that kind of volume and unattended operation, you want InDesign Server – which is the server/high volume edition of INDD.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 3 Nov 2011 06:58:07 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How do I create an interactive PDF file with variable data
Re: How do I create an interactive PDF file with variable data
created by Ti26E31DSxxx<http://forums.adobe.com/people/Ti26E31DSxxx> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4005459#4005459

Creating booklet: Should image files from illustrator be in PDF format??

Good morning,
Over the weekend i got thinking about a image booklet i am looking to create. Despite being a newbie, i feel as though i have made great strides in becoming familiar with both Indesign and Illustrator.
Having created artwork in Illustrator i am trying to determine the best format for placing my images into Indesign.
What i have been expecting to do is to convert the Illustrator files into pdf's and then placing these into my Indesign template. This is what i have been doing on my drafts. Seems there is no quality loss, however i am worried about the size of the file since it is predominatley image based.
I have no need to edit the link once i have finished the artwork in Illustrator IMHO.
Please bear in mind this is booklet is being sent to a commercial printers and being printed on a litho.
Could any of the wise sages on these forums guide me?
Kind Regards,
Don

Hi Don
There really shouldn't be any need to convert your Illustrator files to PDF - the .ai format is (unless you specifically deselect the option on save) a PDF compatible file.

Create a Site Definition file with Visual Web part in Visual Studio

I tried to create a site definition file in Visual Studio 2013 and SharePoint 2013 by following the MSDN tutorial:
Walkthrough: Create a Basic Site Definition Project. Near the end, I added a virtual web part control to the site definition and registered MyWebPartControls in the site definition's default ASPX page as written in the MSDN tutorial:
Unfortunately, IntelliSense doesn't show any MyWebPartControls: tags, and VisualWebPart1 is highlighted with a warning “Element 'SMWebPart3' is not a known element. This can
occur if there is a compilation error in the Web site, or the web.config file is missing.”
Since it’s a warning, I went ahead to build and deploy the solution. However, when I used the site definition template to create a subsite, it returned a parser error:
Unknown server tag 'MyWebPartControls:TestSiteDef1.VisualWebPart1'
I spent half day researching and debugging, and finally solved the problem. The issue is on the registration line:
<%@ Register Tagprefix="MyWebPartControls" Namespace="TestSiteDef.VisualWebPart1" Assembly="$SharePoint.Project.AssemblyFullName$" %>
The $SharePoint.Project.AssemblyFullName$ is a replaceable parameter to provide values for SharePoint solution items whose actual values are not known at design time. Unfortunately, it does not find the right assembly name during the deployment. It should
be replaced by the Assembly’s Strong Name. Here is how I fixed the problem step by step:
In Solution Explorer, open the package node and double click Package.package
Click Manifest tab in the Package.package.
Copy the full assembly name in the package’s manifest. It may be similar like this:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Back to the site definition’s default.aspx page, replace the
Assembly="$SharePoint.Project.AssemblyFullName"
in the registration line with the copied text:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Change the Namespace from
Namespace="TestSiteDef.VisualWebPart1"
to
Namespace="TestSiteDef".
The line to register the web part in a site definition file will look like this:
<%@
Register
Tagprefix="MyWebPartControls"
Namespace="TestSiteDef "
Assembly="TestSiteDef, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
%>
Clean, build and deploy the solution. It works like charm. (Note: the warning message on visual web part may still exist, but you can ignore it).

Assuming your .ascx.vb file is inheriting from the web part class, you can add the custom properties in the same manor (language syntax aside).
Be sure to use the attributes to correctly identify and scope the properties. (see:
http://www.sbrickey.com/Tech/Blog/Post/SharePoint_Attributes_for_Web_Part_properties)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com

How to generate PDF from file with linked images

Hi,
did anybody met/solved problem how to create PDF form file, which contains links to another files/images using PDFGenerator? For example from FrameMaker documents which contains linked images; or from CAD files which contains linked components...
The issue is, that the CreatePDF function moves the source file into a temporary folder, and this operations "brokes" the relative links to linked/included files.
Regards,
Radek

hi
was your problem solved,if not email me [email protected], will try to help you

Acrobat 8 creating enormous pdfs of files with illustrations in them

Similar Messages

Maybe you are looking for