Acrobat 8 not updating in Windows 7

Hello, I have CS3 design standard on a Windows 7 PC 32bit.
The automatic updates for Acrobat 8 have stopped working - I'm stuck on version 8.2.2
When I click install I get error: 1646
I tried to do it manually; the adobe program data folder contains the downloaded .msp files;
AcrobatUpd823_all_incr
AcrobatUpd825_all_incr
AcrobatUpd826_all_incr
when I double click them I get the error message:
'Uninstallation of the patch package is not supported'
Hope someone can help!

>tried to do it manually
So... you went to http://www.adobe.com/downloads/updates/ and selected your product and then downloaded the updater?
As far as I know, the updater is a standalone EXE file that you run
Added... looked, and they are MSP files, not EXE
But... I do not understand the "uninstall" message

Similar Messages

Firefox 11 does not update its window in a remote control RealVNC session

When I am remote controlling a Windows XP 64bit PC with RealVNC, Firefox 11 does not update its window contecns. Old Firefox 3.6 works just fine. Is it called a redraw or drawing issue?

You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*about:config page: layers.offmainthreadcomposition.enabled = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Adobe Acrobat 5 not compatible with Windows 8

When I try to open up files saved in Adobe Acrobat 5 my new computer with Windows 8 gives me a message that they are not compatible with Windows 8. What do I need to do to be able to open these files on my new computerwth Windows 8?

Did you install reader or such on Win8? AA5 is not even compatible with Win7, though it can be made to work with work arounds for the 32-bit version. I suspect you also have a 64-bit system, which I think is totally incompatibile with AA5. Download the Reader XI and try to open the PDFs with that. I suspect they will open fine.
If you want to create PDFs, you will need to purchase AA XI.

Hp split 13 X2 does not update to windows 8.1 how do I stop the auto update

My notebook runs with Windows 8.0 and functions well. Unfortunately the Windows OS want so to update to Windows 8.1 and my notebook does not accept the upgrade as it will not configure the change. Even though I have set the Windows update to require my approval before updates are initiated it continues to auto update to Windows 8.1. When the update fails my PC automatically reinstalls Windows 8.0 and I am back working again. This has happened 3X in the last 2 months and I am frustrated. Does anyone have any suggestion on how to stop this cycle?

Hi @PDaley,
Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that you are having an issue with updating your Windows 8 to 8.1. Although you have set the update to require your approval before installing the update, it does it automatically.
When the update fails it reverts back to Windows 8 and all is well.
Here is a link to HP PCs - Updating Windows 8 to 8.1 that may help.
You can also go to the Windows Compatibility Center that may also help to determine what is required for a successful upgrade.
This one from MIcrosoft may also help. Update to Windows 8.1 from Windows 8.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Acrobat 7.1 update for Windows (with CS2 Premium) Continuous Configuration at Boot Time

I'm running Windows Vista Ultimate SP1 on an IBM T43P laptop with current MSFT patches. My system is set to automatically download and apply Adobe Patches.
The patch installs, but requires "configuration" at every boot time. It completes the configuration process and requests re-boot or defer to complete the installation/configuration process.
My system has been doing this for more than a week. I finally uninstalled Acrobat 7.0 (from within CS2 Premium), re-booted, then re-installed Acrobat Pro (within CS2 Premium) for Windows. I downloaded the full 7.1 update and the process has started all over again.
Please advise, as the constant configuration at boot time and request to re-boot is annoying.
Thanks.

I use a different version of Acrobat, so didn't pay much attention... but I do know this has been discussed before, with a solution
You might try various terms at the SEARCH link
http://www.adobeforums.com/webx?126@@.ee6b2f2
From what I do remember (as I said, no details) the solution was "something like"
1 - manually install the update from the download page
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
2 - turn Acrobat's automatic updating OFF

Folders last modified time stamp are not updated in Windows 7

After changing any .cpp file in Visual Studio, the last modified time stamp for the file's folder
IS NOT updated. What's happening ?
However when I change a Word (.docx) file, the last modified time stamp for the file's folder
IS updated ! How come ?

Hi,
If you thought this issue gets worse and if you have already set NtfsDisblesLastAccessUpdate to 0, then please revoke it to 1.
From the above Blog we can see that in Windows 7, the "Last Modified" field on log files is not updated when a program attempts to open the file or the utility is stopped, this is a design change to NTFS , becase we cache the metadata for
folder contents and do not refresh it until a handle is closed on an open file or an explicit call is made to retrieve the properties of an individual file.
Per your current issue that even if you closed these Vistual Studio files, the timestamp still didn't update. Please try the following and check whether any of them work:
- open the file in a second program
- view the proprties of the file
- "dir <filename>" at a command prompt
In addition, if you edit these Vistual Studio files with Notepad(Before doing that, please close all the programs include Vistual Studio) and try to reproduce the issue, does the issue still occur?
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Photo stream not updating on windows PC

icloud used to work with my ipad and download the photos to My Photo Stream. It has stopped doing this. I have now connected an iphone to the cloud and all the photos have downloaded to it. Why will the photos not update to my windows PC?
If I delete all the photos in My Photo Stream it will only update some of the photos for a two week period. (back in November last year).
Any assistance would be welcome.

Hello,
Sorry for the trouble. That shouldn't happen! I am Vineeth and I am from the Norton Support team.
Can you please disable the Smart Firewall feature in your Norton product temporarily and see whether you can update the iCloud photos? If you can do that, then we may need to allow the iCloud application under the firewall.
Thanks!
Vineeth
Norton Support

Multiclip editing does not update Canvas window with active angle

Hi,
I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
I'm now stuck! and would greatly appreciate some help.
Thanks
Phil

Welcome to the family.
I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
bogiesan

Acrobat reader not compatible with windows 8

i can not open a program, because it says acrobat 5 is not compatible with windows 8
what to do?

Try running it in Windows 2000 or XP Compatibility Mode.

Acrobat 5 not compatible for Windows 8

I just got a new computer and had downloaded Adobe Acrobat 5 to read pdf files.
But this computer has Windows 8 and a screen keeps popping up telling me its not compatible with Windows 8 and that it can cause instability problems.
Can anyone please help me with this problem? I need to know what other program I can use when I open pdf files. I dont want to jeopardize this new computer.

If you just need to read/view PDF files, install the latest Adobe Reader.
If you need Acrobat 5 to edit PDF files, you may be able to run it in Windows 2000 or XP compatibility mode.

Quicktime will not update in Windows

when I try to update QuickTime, (windows7 ) I get an error code that there are insufficient privileges to access the start menu folder for QuickTime. I have tried n as admin, changed ownership of the folder.With out this I can not update ITunes. By the way I tunes will not uninstall ether. Any help would be appreciated.

Lets do a few things.
1. Update QuickTime. http://www.apple.com/quicktime/download/
2. Open up QuickTime player.
3. Click on Edit> QuickTime Preferences>Advanced.
4. In the center of this section there is a "Video" section select Safe Mode.
5. Click on Ok and go ahead and close out of QuickTime.
I have also noted that there are SEVERAL bugs with QuickTime and Nvidia Chips.
A few things I suggest you do is to update all of your drivers, and install any pending Windows Updates.
Please post if this worked for you.
JMG- Not associated with Apple.

I can not update a Windows Server 2008 R2 with Software Update Group in SCCM2012

Hi all,
I got some problems with update deployments these days.
I try to configure SCCM2012 to update 1 Windows Server 2008 R2 (with Hyper-V / This server is in a cluster)
Actually i've 4 other Hyper-V servers and i would like to add one more in the cluster called Hyper-V5. To do that i need that all Hyper-V servers use the same Windows Updates.
I created a collection for my Hyper-V servers and then a Software Update Group with all needed updates (checked the list of another HV-Server).
I did a deployment on this collection using this new Software Update Group.
I checked the Sofwtare Center's logs on the Hyper-V5 server and i saw that synchronization has a successfull state.
But there is no updates installed or displayed in Sofwtare Center.
Here is some screenshots : Oh no i can't post image because ... "Body text cannot contain images or links until we are able to verify your account." waiting to be verified since months.
Thanks for your help.

Hi,
Have you try to run Software Updates Scan Cycle and Software Updates Deployment Evaluation Cycle Actions on the client? Please check ScanAgent.log and PolicyAgent.log to see whether the client received the updates deployment policy.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

WT7-C (PDW0E) Tablet not updating to Windows 10

I know this is a low-end device but it is on the Toshiba list of devices upgradable to Windows 10. When I force the Windows 10 update it starts downloading, but Windows Update stops saying that I have to check my PC, but with no specific information as to what the problem is. I have installed the recommended Toshiba software updates for Windows 10, and the Windows 10 update utility says that my device meets all the requirements. Anyone else having this problem? What needs to be done? Workaround, etc.?

Looks like a European model to me. Your forums are here.
Toshiba Support Forums in Europe

Acrobat 7.1 update fails -- Windows Installer problem

I am running Windows XP SP3.
During the update to Acrobat 7.1, I first get a Windows message in a window labeled "Windows Intaller" that states "The installation source for this product is not available. Verify that the source exists and that you can access it."
Having no clue what this means, I stick my legal Windows XP CD in the drive but that is no help.
This is followed by a message from the Adobe installer that it has failed because "Missing source media. (Error 1612)"
Can anyone please suggest a fix?
Deb C

Help! I can print everything, except Adobe, "unable to print job, is printer available?" After many hours of trying to correct the problem, these are some of the messages I've come up with..."update installed Nov. 15, 07 cannot be removed...cannot delete #1571809 corrupt updater...patch pocket cannot be opened, verify if it exists...error opening document, file is damaged & could not be repaired...cannot be reinstalled because older version cannot be removed...package couldn't be opened, verify that the patch exists and that you can access it or contact the application vendor to verify that this is a valid Windows Installer Patch Pocket...network server corruption....Internet Explorer blocked site from downloading" I've tried restoration, the same results, .."restoration cannot be restored, software distribution serv. 3, no changes have been made". I've tried removing the program, reinstalling the program, tried to remove Desktop shortcuts

Acrobat 8 pro update on windows 7

I have acrobat 8 pro. I just got a new computer with Windows 7 pro and the acrobat 8 will not load. I would like to update to acrobat XI. How do I do this if I don't have to older version loaded?

That's simple.
Open http://www.adobe.com/sea/products/acrobatpro/buying-guide-upgrade-pricing.html
Upgrade to Acrobat XI Pro
Download and install the product.
When you launch it, it will validate the serial number and prompt you to enter the serial number of the qualifying product (Since the new AXI serial number is an upgrade serial number)
Select Acrobat 8 Pro -> enter the serial number of A8 Pro and click Next
........and you are done!!! (my fav step...)
You don't have to install A8 as long as you have its serial number in you hand.
Happy 2013!
~Sandeep V.

Acrobat 8 not updating in Windows 7

Similar Messages

Maybe you are looking for