Acrobat 8 - Page Display for 3 or more pages

I know one can do 2-up page displays - Is it possible to do a display of three pages that will print together in a spread?

I think that 3-up is possible. It is a function of the print driver. If your printer does not allow it, then you can print to a new PDF and select multi-up in the Adobe PDF printer properties.

Similar Messages

Reader XI, An Error Exists on this Page, Acrobat may not display

Hello,
I need some help please. The small business I work for as a contract employee uses Google Doc's, and we input our information into spreadsheets on a daily basis, from our home computers.
My home computer is XP Professional, and I am using Mozilla Firefox 36.0. I know we are using older computer programs, but until we can afford newer computers we have to use what we have.
Prior to today, when I printed off my spreadsheets in Google Doc's I had no problems, however tonight I just starting receiving this error message; An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the file.
I contacted my manager and had her send me a new spreadsheet, Invitation to Edit and input my information into the new spreadsheet.
I then go to my timesheet, and highlight all the rows that I would like to print, then I hit the print key, then I get the box that states, opening my timesheet which is a PDF which is an Adobe Acrobat Document, then I have this message, What should Firefox do with this file? I have it set to open with Adobe Reader (default) do this for files automatically like this.
The file downloads, however I have noticed that Adobe at times has a difficult time opening up right away and then I receive the error message that Adobe isn't responding and I end up closing the program out and restarting my computer.
This error message shows up just before the document begins to print and the document prints off with out any problems.
I even did a repair and that didn't help. My printer is a HP Color LaserJet 4500 and I've had no issues with Adobe prior to tonight.
Do I need to uninstall Adobe Reader & Re-install the program?
I can't send a copy of the file because it contains confidential material.
I've also posted this message on Adobe Acrobat, and have not received a response.
Please advise.
Thank you,

Hello,
Thank you for responding. Sorry that my message is so confusing.
In Google Doc's we are able to highlight/selected portions of a PDF to print.
In Mozilla Fox under Applications, Portable Format Document (PDF) Use Adobe Reader (default).
So when I go to print off my timesheet, after I have highlighted everything, I get this message: I've chosen to open my timesheet which is: Adobe Acrobat Document from https//docs.google.com. What should Firefox do with this file? Open with Adobe Reader (default).
Do this automatically for files like this from now on. I click on the OK and the file downloads as a PDF file in Adobe Reader. On Google Doc's I click on the print key then I am able to open up my printer menu. Its after I click on the print key that I receive this message.
So what do I do please?
Thank you,
Maureen A. Mumm
From: pwillener <[email protected]>
To: Maureen Mumm <[email protected]>
Sent: Friday, March 6, 2015 8:05 PM
Subject: Reader XI, An Error Exists on this Page, Acrobat may not display
Reader XI, An Error Exists on this Page, Acrobat may not display
created by pwillener in Adobe Reader - View the full discussion
Maureen Mumm wrote: I then go to my timesheet, and highlight all the rows that I would like to print, then I hit the print key, then I get the box that states, opening my timesheet which is a PDF which is an Adobe Acrobat Document, then I have this message, What should Firefox do with this file? I have it set to open with Adobe Reader (default) do this for files automatically like this.
This is very confusing to me; Adobe Reader does not have such a functionality (to print highlighted/selected portions of a PDF). Could it be that this is a functionality of Google Docs? Also I have never seen a message "What should Firefox do with this file?". If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7262026#7262026 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7262026#7262026 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

Hi everyone,
I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly." When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
Does anyone out there have a suggestion for us? PLEASE HELP!!!!

Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

When I try to open the "markets" page on the Firefox hompage, it displays for 3 or 4 seconds and then drops off; I get a white screen; this does not happen with Explorer.

When I open "markets" from the homepage, it comes up but drops off after a few seconds and
I get a white page. This does not happen with Explorer. A similar but much more extensive
problem happened a month or so ago (I couldn't open attachments). I called Microsoft and the
fellow messed about with my computer for an hour or so, but ended up saying he couldn't help
me. However, when he went away, the problems went away.
== This happened ==
Every time Firefox opened
== two weeks ago?

~~red:'''''displays for 3 or 4 seconds and then drops off'''''~~
If you have RealPlayer Browser Record Plugin '''extension''', disable/remove the RealPlayer Browser Record Plugin extension in the RealPlayer Preferences (RP: Tools > Preferences > Download & Recording) . Restart Firefox and test.
See Noah_SUMO's illustrated answer in this thread if the above is not clear: https://support.mozilla.com/en-US/forum/1/557689?
The RealPlayer Browser Record Plugin '''extension''' adds some extra features like saving media files.
Be sure not to get confused with the RealPlayer '''plugin''' (Tools > Add-ons > Plugins) that plays media files.
https://support.mozilla.com/en-US/forum/1/557689?
http://support.mozilla.com/en-US/forum/1/459823
https://support.mozilla.com/en-US/forum/1/446905?
https://support.mozilla.com/tiki-view_forum_thread.php?forumId=1&comments_parentId=472596
http://support.mozilla.com/en-US/forum/1/461211
http://support.mozilla.com/en-US/forum/1/376867
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]].
~~red:'''''Other Issues'''''~~: to correct security/stability issues
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Update Shockwave for Director''': your version 11.0; current version 11.5
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
IMPORTANT: I have found it wise to always restart your system after doing anything with Adobe products.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly. Please

Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated.

Thanks for the quick reply. Would zipping the pdf protect it through email...like I said, this is the first time I've had this problem and I've been getting pdfs though email for years.

Adobe Acrobat 10.1.10 for MAC, gray pages

I am using Adobe Acrobat 10.1.10 for Mac. When I open a PDF, I see nothing but gray on each page of the PDF. In the Quick Look the pages are there. Please advise.

This is usually because the pages contain image only data that is at a lower resolution than Adobe Acrobat will display. Open the PDF file in Mac OS X Preview, which should also display the PDF content and then go to File>Export as PDF. Name the file as a different name and then open it in Acrobat. The graphic content should now display.

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Error in Acrobat 8: An error exists on this page. Acrobat may not display the page correctly...?

Hi,
We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9. Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
Let me know your comments/suggestions.
Thanks!

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

Default display for iweb photo albums page

I am trying to make a web site using i web with several different photopages. I am using an albums page but the default display for the album covers is landscape. Can anyone tell me how to make them portrait so my pictures on the album cover are not cropped?

Hi,
this sounds to me ridiculous. This has to be considered as bug, not limitation as I am allowed to put pictures in portrait to my "Pictures"-template site. How can I contact Apple regarding this issue as on their support page they seem to hide the way to contact them in case of troubles... Bad customer care Apple...
my 2 cents
Xanthalas

Receive "The page cannot be displayed" for Pricing Conditions

To all,
I receive the message "The page cannot be displayed" for Pricing Conditions when I select the "Accesses" button. I then received the message "HTML field saved to C:\temp\CRM_IPC.html".
This only seems to happen when using the pricing in the service order confirmation.

Hi Bob,
R u using IPC for pricing, if yes just check the connections to the IPC server.
The error is because of the IPC connection not getting established.
Please reward points if it helps.
Regards,
Amit Mishra

Display * for more than 2

hey,
       I have to display * if the material contains more than one aggrement(ebeln) i used
LOOP AT i_ebeln INTO wa_ebeln
      where matnr = wa_newinput-matnr.
    IF sy-tabix GE 2.
    wa_displaylog-mover = '*'.
    EXIT.
    ENDIF.
    ENDLOOP.
READ TABLE i_ebeln INTO wa_ebeln
      with key matnr = wa_newinput-matnr.
   IF sy-subrc EQ 0.
    wa_displaylog-ebeln = wa_ebeln-ebeln.
    wa_displaylog-netpr = wa_ebeln-netpr.
   ENDIF.
but it is displaying * for every material that has one aggrement also

Hi,
the sy-tabix has the position (index) of the line in the internal table i_ebeln.
You need a counter for like this
data: lv_counter type i.
clear lv_counter.
LOOP AT i_ebeln INTO wa_ebeln
where matnr = wa_newinput-matnr.
lv_counter = lv_counter +1.
IF lv_counter GE 2.
wa_displaylog-mover = '*'.
EXIT.
ENDIF.
ENDLOOP.
Kindly regards,
Stefan

Looking for a little more info on Playstation 3 on Apple 20" display

Sorry to ask for more info on this. I did find some other threads, but looking for a bit more direction.
First, let me say I have a bunch of old tube TV's and am looking to purchase a Playstation 3. Using Playstation 3 on a tube TV seems kind of stupid, especially when I have a great LCD monitor sitting right on my desktop.
I looked at solution from Elgato. However they said they are not making any more units and when it sells out it is gone. So I am a little weary of purchasing something that may no longer be supported. Their solution does provide video capture and DVR capabilities as well, which I could also use.
Other then that, I am wondering if there are any other solutions that people could recommend. I do plan on buying a LCD or Plasma TV in the near future, but until then, I would like to purchase a Playstation 3. Just looking for any advice of any kind from others. Thanks.

I have the same 20 inch Apple Display. If you have the newer DVI right?
if so HDMI to DVI will not work well EyeTV from Elgato is still in the Mac store near me I have the 200 FireWire you want the 250 USB2 to do live. I have had the 200 FW for three years it is great.
Having said that I did buy The Mitsubishi LCD LT-46231 : 46"
1080p LCD Flat Panel HDTV ($4,600)
I love it for computer use it was made for it. The HDTV is so good with cable and better with Blue-Ray which your PS3 has!
http://www.mitsubishi-tv.com/j/i/18326/TelevisionDetails/LT46231.html?cid=377
I would if you don't want to spend allot on a 1080p LCD (being more then 2k) The Mitsubishi LT-37131 LCD Flat Panel HDTV ($1,699) . Sony & Samsung both are the same LCD. Mitsubishi is better then Samsung/Sony allot better when used with a computer (it is the only new LCD maker that has a VGA & DVI port just for Computers)
Both of the Mitsubishi Link's you will like as one is a money saver.
http://www.mitsubishi-tv.com/j/i/18326/LT37131.html?cid=390
http://www.mitsubishi-tv.com/j/i/18310/Promotions.html
I also got a Pioneer Elite® Model PRO-FHD1 for TV only I will not run XBox or My computer though it. The link below show's why I got this to my mother need a new TV to so see the link 2 for 1
http://www.pioneerelectronics.com/pna/v3/pg/top/cat/article/0,,2076310069651396920404,00.html
Sorry to go on I hope it help's
Thomas
PowerMac G5 Quad 2.5Ghz, Dule2.0 G5, Mac Pro 3Ghz 6GB's PowerBook G4 12in 1.5Ghz Mac OS X (10.4.8) PowerMac G4 duel 1.25Ghz, iSight, iPod5, AppleDisplays 3 23in DVI GeForce 6800GT
PowerMac G5 Quad 2.5Ghz, Dule2.0 G5, Mac Pro 3Ghz 6GB's PowerBook G4 12in 1.5Ghz Mac OS X (10.4.8) PowerMac G4 duel 1.25Ghz, iSight, iPod5, AppleDisplays 3 23in DVI GeForce 6800GT
PowerMac G5 Quad 2.5Ghz, Dule2.0 G5, Mac Pro 3Ghz 6GB's PowerBook G4 12in 1.5Ghz Mac OS X (10.4.8) PowerMac G4 duel 1.25Ghz, iSight, iPod5, AppleDisplays 3 23in DVI GeForce 6800GT

An error exists on this page. acrobat may not display the page correctly.

While opening a pdf document it shows an error as "An error exists on this page. acrobat may not display the page correctly. Please contact the person who has created this pdf to correct the problem". The pdf was made in 1.4 Adobe 5.x version. Any suggestions.

I suggest you contact the person who has created the PDF in order to fix the problem.

Reader 11.0.0.1 An error exist on this page. Acrobat may not display the page correctly. Please cont

"An error exist on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."
Any ideas how to get rid of this? Realistically its not practical to contact them, nor the other 1,000,000 web site owners whom host pdf's.
I really would like to disable the pop up only.
Seem to get it on quite a few PDF's. This web page seems to have quite a few that produce the problem.
http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
click on the link to the pdf, scroll down a few pages and it pops up.
I do not get the error when using reader 10, only the new 11.0.0.1 version.

Hi Pat,
No problem withthe link you supplied.
This is one that has the problem "948 Cayenne Owners Manual - 2008 - Turbo" http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
Just FYI, I look after 8000 clients, have the same problem on 3 of my test machines.
All windows 7, 64 bit IE9 fully patched.
Using 32 bit IE
Testing prior to upgrade from 10 to 11

Pause / Resume button combination not working when set to display for "rest of project"

Good day,
I have created a set of four objects on slide2 of my project
1. Smart Object rounded rectangle with text "(playing) - CLICK to Pause" [this is the graphic the user sees]
2. Smart Object rounded rectangle with text "(paused) - CLICK to Resume" [this is the graphic the user sees]
3. Smart Object rectangle, transparent, used as button, set to not display in project - btn_Resume
4. Smart Object rectangle, transparent, used as button - btn_Pause
A. Script assigned to btn_Pause hides btn_Pause and the "CLICK to Pause" graphic, shows the btn_Resume and "CLICK to Resume" graphic, and pauses the project by setting the system pause variable to 1
B. Script assigned to btn_Resume hides btn_Resume and the "CLICK to Resume" graphic, shows the btn_Pause and "CLICK to Pause" graphic, and resumes the project by setting the system resume variable to 1
C. All items are set to display from the beginning of slide2 for the "rest of project"
On slide 2, the buttons hide/show and pause/resume behaviors work correctly.
On slide 3, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors (show/hide/pause) occur until a good amount of time into the slide: you can click all you want for 20-30 seconds, but nothing works except the click sound. Eventually, the behavior will work.
On slides 4 and following, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors EVER work.
If the behaviors NEVER, EVER worked, I would keep looking for what I did not have set correctly, but the correct working on the slide where they are set, delayed behavior on the next, and no behavior on the remainder of slides following has me stumped.
Captivate version 6.0.1.240
Windows 7 OS
I hope I'm missing something obvious here, and I'm more than willing to face-palm if you tell me . Otherwise, I have not been able to find any setting that makes any difference. I would REALLY rather not duplicate the buttons and scripts on every page of the project. Given the blog posts I have seen saying this method should work just fine, I'm hoping there is a side quirk somewhere that I'm missing.
Thanks for any help you can give.

Without clouding with too much explanation, this technique arose out of a need to deal with (in a different project) objects that were grouped, and wanting to deal with the groups in as simple a way as possible, allow for easy swapping of group assets, and having a few buttons do multiple things. The idea of being able to have multiple interactive buttons stacked on top of each other while appearing for the rest of the project led to trying this simple construct before trying something more complex.
You are correct, that there is a simpler solution, which we ended up using because we were not able to get two interactive buttons stacked on top of each other while displayed for the rest of the project to work properly (although that is SUPPOSED to work, as far as I understand).
Here's what we ended up doing:
A) Two smartshapes used as messaging graphics
B) A single (one) interactive smartshape used as a button
C) A conditional action to pause/resume and show/hide the appropriate messaging graphics
D) All three objects (A&B) stacked, B on top.
E) All objects set to always appear on top, and to display for rest of project.
Our hypothesis, then, is that you are not able to stack interactive objects on top of each other and then display for the rest of the project.
If anyone has evidence to the contrary, we would, gladly, take a look.
Thanks for your interest Lilybiri, and for your input.
Best regards,
Hank

Acrobat 8 - Page Display for 3 or more pages

Similar Messages

Maybe you are looking for