Acrobat 8 pdf printer driver

Running in Windows XP and try to publish to pdf from Word.  Get error message "can not located pdf printer's printer driver".  Need help 

Assuming you have AA8 installed, you should have the Adobe PDF printer present as an active printer on you machine. If not, then open Acrobat, go to the help menu, and select repair. If you can not do that, then go to the Control Panel>Add/Remove programs and activate the repair there. You might also check for updates, you did not indicate the version of AA8 you are talking about.

Similar Messages

  • Reader 9 Acrobat PDF Printer Driver Continuously Installs

    Since I have installed Reader 9, the Acrobat PDF Printer Driver Continuously Installs in the background degrading system performance. Does anyone else have this problem? It auto created a System Restore point, so check that. I am running XP with all patches applies.

    Hi Mike,
    I have exactly the same problem that you describe. At first I thought it might be malicious software that was installing a fake driver, but after running Malware, Spybot and some other programs, I'm still left with the problem. I have a lot of Adobe software installed (Adobe Premiere Elements 7, Adobe Acrobat Pro 8, Adobe Audition 3, Adobe PhotoShop 7 and of course Adobe Reader 9, plus as you indicate Adobe Air and Acrobat.com I'm not sure when my problem started, since I only recognized it when I went to do a system restore. It appears to install the driver about once a minute. This leaves me with about 3 days worth of useless restore points.
    The only advice that I have received is to un-install all my Adobe stuff, then check the System Restore, then one by one re-install the packages checking each time what happens in the system restore.
    Have you found any solution since your original post?
    Dave Freeman
    Peterborough, Ontario
    Canada

  • Acrobat PDF Printer Hangs in Windows 8

    I am running Windows 8 Enterprise RTM  64-bit on an Intel i7-3770 3rd gen CPU, Z77 chipset. I've found that most PDF printers I have been using on Windows 7 now hang on 8, including the Acrobat X printer (latest version). I have found one free alternative that works fine, but would like to get back to using the Acrobat printer. Will Adobe be releasing an update that addresses the hang?
    Above is a screenshot afterr more than ten minutes:

    Hello All
    I have been struggling with this same problem of Printing to Acrobat PDF driver freezing up not only the print spooler, but also the software I was printing from, on Windows 7 64Bit, using both acrobat 9.4 and Acrobat X with the same freeze, stall lockup result.
    I think this is the same problem you are having.
    I found many questions about this online but no useful answers, and alot of fingerpointing trying to blame different programs and combinations of software.
    The 1 solution, which created a PDF and did not freeze, was to switch of the choice of a saving location in the PDf driver and setting a fixed PDF save location instead of the ASK for location option.
    This worked but was a real pain having to move and rename the file each time.
    This got me thinking that there was actually nothing wrong with the PDF driver.
    The problem seemed to be the user input to save the file to a certain location.
    I then experimented and found that if I was fast enough with a file name, that the save to location option did not freeze up when creating the PDF.
    By repeatedly trying to print and looking at the print dialog box I noticed that after a count of 5 seconds the Acrobat PDF print driver progress box greyed slightly (Asif loosing focus) and after that happened there was no hope of a successful PDF.
    The 5second timer got me thinking about a windows timeout, rather than a PDF option.
    PDF Print Freeze Problem Solution:
    Windows 7 64 bit (And I assume Windows 8 too) has a default program timeout of 5 seconds after which Windows considers a program to be NOT RESPONDING.
    The time during which the PDF printer is waiting for a response from you for a save location, is seen as inactive by Windows and Windows decides that the Print driver has stalled.
    Something then changes anough to effect the driver, and once the PDF print driver is allowed to carry on and save the PDF it can't anymore and stalls.
    Solution is to edit the HungAppTimout in the Windows Registry, and set it to something like 20000 to 30000 = 20 to 30 seconds.
    http://technet.microsoft.com/en-us/library/cc978614.aspx (Info regarding the Registry Key)
    HKEY_CURRENT_USER\Control Panel\Desktop\HungAppTimeout
    This then give you 20-30 seconds to select a save location for your PDF.
    In my case (Windows 7 64bit) the Registry entry was missing.
    I had to create it from scratch and reboot.
    If ENTRY IS MISSING:
    Goto the folder in the registry
    Right Click  - NEW - STRING VALUE
    Name it exactly as above including CAPS: HungAppTimeout
    Set the value to 20000 (For 20 seconds or more if you need it)
    Reboot Windows.
    After that Printing to PDf with Acrobat works 100%.
    Note this option also helped on my Windows XP PC.
    I hope this prevents others from struggling as much as I did to fogure this out.
    Regards

  • PDF print driver hang when pasting filename from Windows Clipboard

    This is consistently reproduceable on my Win 7 64-bit machine, running Acrobat Pro 9.3.1 (Creative Suite 4) and Firefox 3.6.2. There are no version properties available for the Adobe PDF Converter  print driver, when I inspect it via Control Panel.
    - copy something (i.e., a filename) to the Clipboard
    - in Firefox, choose File > Print > choose the Adobe PDF print driver
    - I am prompted for the Adobe PDF filename
    - when the Save As dialog displays, click in the "Save PDF File As" filename field, and press Ctrl+V.
    Firefox and/or the Acrobat PDF print driver are now hung/crashed; you must kill them via Task Manager.
    If you restart Firefox and repeat the above steps, but typing in the filename instead of pasting it, everything works fine.

    Hi,
    First please make sure your Office is up-to-date.
    I suspect this may be related to some 3rd-party add-ins or the security software, first please run Outlook in Safe Mode to determine if 3rd-party add-ins are related:
    Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
    If there’s no problem copying and pasting in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
    Please also disable the anti-virus program temporarily to check if this makes a difference.
    Regards,
    Melon Chen
    TechNet Community Support

  • Why does my Acrobat Pro 9 PDF print driver either lock up or become confused as to where it should store a file when printing a document from within the Firefox browser?

    I use Adobe Acrobat Pro 9.4.5 for creating .pdf files on a Windows XP SP3 platform. Firefox 6.0.2 is my browser of choice. This question only applies to the .pdf printing process. All other printer drivers work fine with this version of Firefox.
    In attempt to save paper, I choose to print most documents in an electronic .pdf format using the PDF print driver and save them to my USB drive. Before upgrading my Firefox version to 6.0.2 this process seemed to work fine but after upgrading the .pdf print process seems to be experiencing problems. This particular printing process will cause Firefox to lock up when the distiller tries to print the file to what I believe is a temporary folder under the Adobe folder. When it does this I am sometimes able to force it to complete the process but frequently it will only produce a log not a .pdf file. On other occasions the distiller will just lock up mid print without producing any kind of error message. In both cases I will frequently have to use Windows Task Manager to break out of the process which then shuts down the Firefox browser. I don't seem to have any problems when I use Internet Explorer to perform the same function. As far as I am aware I am running the most current drivers as Adobe automatically pushes down updates to me as they become available. Any ideas how I can overcome this issue or is it inherent to the new version of Firefox?

    The PDF file itself does not control the "print as image" preference, which should always be turned OFF unless there's a specific need to rasterize the entire page, and is turned off by default in all Acrobat and Adobe Reader installations.
    What's the filetype for the ultralight font and what export setting* are you using in ID? If you're exporting to earlier than PDF1.7, OpenType fonts will be converted and may experience some small changes in shape if their hint definitions aren't done right.
    *As a side note, bear in mind that InDesign does not use any part of Acrobat when exporting PDFs, so questions specific to that stage in the process should be posted to the InDesign forums.

  • Acrobat 6.0 and Windows 7 - is there a PDF printer driver available?

    Hi,
    I have been using Acrobat 6.0 with Windows XP fine. However, I just got a new computer that has Windows 7.
    I installed Acrobat 6.0 but cannot now convert any documents to PDF on this new computer. I get this error--
    "The PDF maker cannot find the Adobe PDF printer driver and to reinstall Adobe Acrobat 6.0"
    However, reinstalling Acrobat 6.0 does not help, nor does the repair feature.
    Is There a patch for this product? Can I download a driver for the PDF printer so that it is compatible with Windows 7?
    Thanks for any help you can provide.

    I have Acrobat 6 as well and just upgraded to windows 7. Can't afford Acrobat Version 9 either. From what I understand, only Windows 7 PROFESSIONAL, ULTIMATE or ENTERPRISE editions can you run most Windows XP productivity programs in Windows XP Mode(separate download). At least that's what I read here http://windows.microsoft.com/en-us/windows7/products/features/windows-xp-modeI wonder if that will help you. I unfortunately only have STARTER edition.
    *The following text is copied and pasted from http://windows.microsoft.com/en-us/windows7/products/features/windows-xp-mode
    Windows 7 Feature has a Windows XP Mode
    It's the best of both worlds: The new Windows XP Mode lets you run older Windows XP business software right on your Windows 7 desktop.
    Designed primarily with small- and medium-sized businesses in mind, Windows XP Mode comes as a separate download and works only with Windows 7 Professional, Ultimate, and Enterprise. Windows XPMode also requires virtualization software such as WindowsVirtual PC. Both are available free on the Microsoft website.
    To download Windows XP Mode or learn about its system requirements, visit the Windows Virtual PCwebsite.
    Windows XP Mode, available for the Professional and Ultimate editions of Windows 7, helps prevent older business programs from becoming obsolete.
    Message was edited by: Murie

  • What is the Acrobat 7 Adobe PDF printer driver name?

    I can no longer print to my "Adobe PDF" printer.
    I have Acrobat 7.1.0 (as part of Creative Suite 2) on my small travel laptop system running Windows XP Professional, SP3. 
    Recently, if I try to print to a PDF file from Firefox, I get:
          "an unexpected error has occurred" or "an unknown error has occurred while printing".
    I went to the Adobe PDF printer itself and if I try to choose the properties, I get "The Adobe PDF Converter' is not installed on this computer. Then it asks me if I want to install the driver now.  If I say yes, it wants the driver name, which I don't know and don't see obvious candidates.   If I say no, and I see the properties for the PDF printer, it says the driver is "Adobe PDF Converter", but I guess the underlying driver file is missing.
    I found a posting for how to manually reinstall the printer on Acrobat 10, but my directory structure is different and I don't have a file called pdf.inf, so I suspect the driver name is different in Acrobat 7. 
    I can still launch Acrobat 7 just fine, and have tried doing the repair from the help menu twice, and rebooted afterward.  No luck.
    I didn't delete the Adobe PDF printer before the repair.  I was afraid to.
    I could go back to the original CS2 disks, but then I'll lose all the updates I've downloaded and installed over the years.  I don't know if Adobe even has the updates for CS2 online anymore.
    I suspect if I knew the name of the PDF printer driver in Acrobat 7, I may be able to fix it. Even if the file got deleted, I likely have it on an old backup.
    Does anyone know the name of the ".inf" driver file for the Adobe PDF printer in Acrobat7 (CS2)?
    If not, is there something else I can run from the setup files that will reinstall the PDF converter?
    Thanks.
    Cindy

    I cannot confirm, but feel confident that Adobe has the updates available for CS2.
    Reinstall from the disks.
    I just looked through my XP system running CS2; I cannot see an easy way to reinstall the Adobe PDF Printer, but it is already installed there.

  • When I installed Acrobat 9, the Adobe pdf print driver did not install

    When I installed Acrobat 9, the Adobe pdf print driver did not install

    Might depend on the OS that you did not mention. Try doing the updates and see if that solves the problem. Otherwise, tell us more about your OS.

  • How do I deal with "Acces Denied" error when trying to print to Adobe PDF printer driver

    Windows 7 64 bit OS (updated)
    Adobe Acrobat XI (11.0.06.70)
    I am unable to create a PDF file from within the Windows 7 print dialog.  Each time, I receive a terse "Access Denied" error followed by the display below (the progress bar never advances).  I thought upgrading to Adobe Acrobat XI might fix this but no such luck.  It seems that others have experienced similar issues.  I noticed in the display below that Adobe is trying to create the file in a folder which does not exist (at least I can't see it even after setting my preferences to display hidden files).  I have the hope that, if the folder were present and accessible, Adobe would create the file without trouble.  Is there a way to instruct Adobe Acrobat XI to create this temporary file in a different location?  One of my frustrations is that I used to be able to print Adobe Acrobat files without trouble on the same computer.  I wonder whether the use of a registry cleaner may have contributed to my problem.
    What are the best practices for addressing the Access Denied and inability to print problems I've encountered?
    Thanks for any help you can provide in sorting out this problem. 
    Best,
    Matt

    I have been having the exact same problem with Adobe Acrobat X.  I have uninstalled and reinstalled numerous times and applied all the latest updates.  Every time I try to print ANTHING to the Adobe PDF print driver, the software hangs (MS Office, webpage, or other programs).  When I finally kill the process using Task Manager, I find the little "Access Denied" box.  This has been happening for nearly one year.  I have limped along since I have other computers to use.   I have attempted to find answers on this forum in the past, and no one seems to have a clear answer to the problem.
    I, too, was tempted to upgrade to XI, but Matt's post settled the matter, since it did not help him.
    I am using Win 7 Home (64 bit) and until this issue started, I have had no problem with AA X.
    Where are the Adobe experts when you need them?  Please help us. 

  • How do I install a pdf printer driver on my window computer using create pdf

         How do I install a pdf printer driver on my window computer using create pdf

    http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_adobePDF_desktop_printer

  • Automated printing to Adobe PDF printer driver

    Hi,
    my application is hosting a 3rd party control that also offers some printing functionality to the default printer driver. However, it does not support PDF export yet. Thus, I would like to implement PDF export using the Adobe PDF printer driver. This export should happen silently and should not force the user to interact with the pdf printer driver. The PDF needs to be stored on a predefined folder using a predefined file name.
    My question is: How can I use the Adobe PDF printer driver from my own application as a custom printer driver?
    I would like to have a workflow like the following:
    1. User presses "export PDF".
    2. The application does:
        - store the current default printer
        - set the default printer to the Adobe PDF printer driver
        - trigger the 3rd party control print mehtod (prints to the default printer)
        - wait until the print job has ended
        - collect the printed PDF from the predefined folder / filename for further processing
        - reset the default printer to the previous default
    Ideally I would like to have some progress information during printing.
    Is this possible using the Adobe Acrobat SDK? If yes, how? A first glance at the documentation did not reveal how to steer the Adobe PDF printer driver from an own application (COM?).
    Thank you,
    Max

    Thanks for your hint. I've found the example AdobePDFSilent in the SDK which nearly does what I am intending to do. However, one thing remains open:
    How can I get progress information about the corresponding print job from the destiller. Ideally I'd like to have an event after each page + one event after the file has beens successfully saved.
    Is this information exposed by the destiller API?
    Regards,
    Max

  • Disabling "Save as..." popup in Acrobat Distiller printer driver

    Hi!
    We are using an application which is automatically generating a pdf file using the Acrobat Distiller printer driver, but recently one workstation start poping up a Save as... window each time a file is generated (it is very annoying since this application is generating a lot of different reports).
    How we could avoid having to confirm each time the name of the file? Registry setting?
    Thanks.
    Claude Lachapelle
    La Coop fédérée, Systems Administrator

    Already did that.
    If I remember correctly it was something in the registry... still searching.
    Thanks.
    Claude Lachapelle
    La Coop fédérée, Systems Administrator

  • Trouble installing Adobe PDF Printer Driver Plug-in

    we are attempting to install the Adobe PDF Printer Driver Plug-in on our new macpro with osx 10.6.4. after we download the  VISE pdfen.sea file and try to open it we get the message "the document pdfen could not be opened because it is damaged or incomplete." we have downloaded from several different sources but keep getting the same message. we would appreciate any comments or advice.
    thanks for your help.

    The Adobe PDF Printer instance does not work in OS X.6. Please look at the announcement on the top of the Acrobat Mac forum.

  • PDF Print Driver

    Greetings
    I need a PDF print driver for Macos X 10.6. Does anyone make one?
    Yes, I know I can save to PDF in the standard print dialog. That works fine for the vast majority of my work.
    However some Java programs that I have to run for work don't use the standard print dialog. They communicate with the printer drivers directly and do not offer the option of saving a file to PDF.
    Thus the need for an actual print driver that "prints" to PDF.
    Does not have to be free, but should be reasonably-priced.
    Thanks for any suggestions.
    Byron

    Went to the site, downloaded, and installed.
    Works wonderfully! The files are about four times larger than they need to be, but I can whittle that down using Acrobat Pro's "Reduced Size PDF" function.
    Thanks!

  • PDF printer driver not loading

    Ok...first off I had CS on another laptop and the driver was there. Got new laptop loaded CS and PDF printer didn't load up. Second. I got and loaded CS3 (not just because of the lost printer driver, but...) and loaded it onto the same *new* laptop and STILL not PDF printer driver. I've looked at the downloads and can't find it available there. This is driving me nuts. I develop proposals and other documents in word (not to mention the PIA factor of not being able to print directly to PDF in AI or PS) and have to dump files to a shared directory so that I can use Acrobat Pro 6 on a desktop before sending out to clients. Arrrrrgghhh (and yes, I know that Talk Like a Pirate Day isn't until Sept 19th.)
    I have tried reinstalling or 'fixing' ABPro umpteen times now and find myself fulfilling Einstein's definition of insansity. Any ideas on what I can do to get a *&^%# PDF printer driver to load?

    Hi Daniel,
    I´m using AutoVue 3D Professional Advanced 20.2.0.... I´ve read that there were problems
    in the version 19.xx  (before version 20.xx)
    Best,
    Merkowitsch

  • Print with Adobe PDF printer driver from Word: Stripes in images

    Hello,
    I use Acrobat 8 Professional (Version 8.1.3) on Windows XP SP3 (german version). I'd like to create a PDF out of a Word document by printing with the "Adobe PDF" printer driver. I have a problem with an image containing large unicolored areas: In the PDF there are recognizeable stripes in the colors of the image. This is when viewing the PDF with Acrobat 8 Professiona, when importing a page containung such an image into Photoshop, and when printing such an image.
    The image is an RGB TIF, but I tried it with a CMYK TIF as well as with an RGB BMP. The reault - when printed out of Word - is the same. If I print the same image to a PDF from InDesign, then everything is fine, no stripes.
    Does anybody know how to optimize this?
    Best regards,
    Christian

    Sorry, I should have mentioned this, of course. Well the document is a DOC (because it was prepared by co-workers with Word 2003). I use Word 2007, when I opened the DOC Word switched to "compatability mode" (not sure about the exact English term, I work with German versions). But even when saving the document under a new name, I kept it as a DOC, so my co-workers would be able to open it again at their computers with Word 2003.
    My Acrobat is already version 8.1.6 and because I always install Windows Updates that the automatic update service offers, I guess my Word 2007 is also up to date.
    But sure, if I can be of any other help, let me know...
    Best regards,
    Christian

Maybe you are looking for

  • Spool list recipient in SM36

    Hi All, I am using the FM's JOB_OPEN, JOB_SUBMIT and JOB_CLOSE in a report program to create batch jobs. Now some of the batch jobs have DL's  to which spools of the batch jobs are sent and are maintained in 'SPOOL LIST RECIPIENT' button of SM36. In

  • How do I delete my credit card information?

    I'm trying to delete my old credit card information. (I don't have another credit card.) I can't update any of my apps because they continue to ask me for this credit card. I don't even understand why. None of the apps I own are premium. They are all

  • How would I create a screen with links after a person logs into their computer?

    I have been asked to create a custom welcome screen that would load after a person logs into their computer . This screen is to have links to a couple of items. but I need this to show after they log in and before they see their desktop. How do I do

  • Table for existing PO/Sch.Agg pricing condition types

    Hi Experts, Which table will have PO / Sch.Aggrement  - pricing condition types with values as maintained in PO (like freight / P&F etc). I have the input of PO/Sch.Agg ref, plant, vendor & material. We have created Z condition types for freight/ P&F

  • Pricing Condition during upgrade

    Hi, During our SAP upgrade we are experiencing an issue related to PO pricing conditions. How can we bring over PO pricing conditions in open POs from 4.7 system to 6.0. We are using several custom condition types. If anybody have an experience like