Acrobat 8 prof: zusätzliches Blatt vom Scanner einfügen

Mein Scanner zieht nicht immer komplett alle Bögen ein. Wie kann ich in einem etwa 100 Seiten Dokument fehlende Blätter an den fehlenden Stellen über den Scanner einfügen?
Es ist eine Mordsarbeit, die fehlende Blätter in eine zweite PDF Daten zu scannen und dann die beiden PDFs zusammenführen und dann im dritten Schritt, die nachgreichten Blätter an die richtigen Stellen zu positionieren.
Ich bin dankbar für jeden Tipp,
Roland

Hallo Roland,
für das fehlerhafte Einziehen der Dokumente kann dein Acrobat natürlich nichts dafür und keine Automatik der Welt wird dir die Seiten wieder richtig einfügen.
Ich würde die nachträglich gescannten Seiten gleich mit den korrekten Seitenummern im Dateinamen speichern (und nicht im Paket). Dann händisch über Dokument/Seiten einfügen platzieren.
Wenns sehr viele Seiten sind bleibt nur die Alternative Scanner tauschen.
Gruß
Bernhard

Similar Messages

  • Acrobat Prof 2007; Bild  in eine Seite einfügen

    Hallo Adobe-Experten,
    gibt es in Acrobat Prof. Vers. 7.0 die Möglichkeit ein beliebiges Bild (jpg oder auch anderes Datenformat-Format; Größe z.B. 3 x 2 cm) innerhalb einer PDF-Seite an eine definierte Stelle einzubasteln (analog z.B. dem eines Rechteck-Objektes) und wenn ja wie.
    Vielen Dank bereits jetzt für Eure Bemühungen.
    Grüße von neoma

    Hallo,
    hatte es mit Hilfe von neopa noch selbst gepackt (mittels Kommentarwerkzeugen und benutzerdefinierten Stempel)
    Grüße von neoma

  • Acrobat X Schnellwerkzeug - Scannen - autom. Farbmoduserkennung einfügen

    Acrobat X in Schnellwerkzeug -> Scannen -> "autom. Farbmoduserkennung" einfügen
    Hallo, wie kann ich in Acrobat X, Windows 7 64bit, unter Erstellen / PDF von Scannen / autom. Farbmoduserkennung...
    genau dieses, die autom. Farbmoduserkennung zum Schnellwerkzeug als Button hinterlegen.
    Leider finde ich unter Schnellwerkzeugeinstellungen nur Erstellen, aber nicht die Punkte/Menüs darunter.
    Danke

    Ja diese Funktion gibt es nicht in der Schnellwerkzeugauswahl.
    Genau das ist das Problem.
    Da gibt es nur "Erstellen", aber das gibt es ja sowieso überall wie man hier im Bild sieht.
    Die häufigkeit an Klicks ist damit immer noch nicht auf 1 reduziert.
    Ich möchte aber gerne den Autom. Farbmoduserkennung als Button haben um mit einen Klick den Scanvorgang zu starten, statt immer dem Menü entlang zu gehen und dann den Scanvorgang zu starten.
    mfg

  • Acrobat 8 prof

    I downloaded the Acrobat 8 Prof. and now the adobe distiller
    that was on my printer selection screen is gone. Where did it go
    and how can I get it back?

    Hallo Roland,
    für das fehlerhafte Einziehen der Dokumente kann dein Acrobat natürlich nichts dafür und keine Automatik der Welt wird dir die Seiten wieder richtig einfügen.
    Ich würde die nachträglich gescannten Seiten gleich mit den korrekten Seitenummern im Dateinamen speichern (und nicht im Paket). Dann händisch über Dokument/Seiten einfügen platzieren.
    Wenns sehr viele Seiten sind bleibt nur die Alternative Scanner tauschen.
    Gruß
    Bernhard

  • Voreinstellungen bei 3D-PDF: "Modell-Rendermodus" und "Zusätzliche Beleuchtung aktivieren" nicht möglich?

    Hallo Zusammen,
    ich möchte die Voreinstellungen bei 3D-PDF: "Modell-Rendermodus" --> "Gefüllte Kontur" und "Zusätzliche Beleuchtung aktivieren" --> "Scheinwerfer" im Acrobat Reader setzen.
    Bisher leider ohne Erfolg.
    Nach dem Schließen des Dokuments gehen die Einstellungen verloren, auch wenn unter Voreinstellungen/Dokumente/Öffnen-Einstellungen der Kenner "Letzte Anzeigeeinstellungen beim erneutem Öffnen von Dokumenten wiederherstellen" gesetzt ist. Unter 3D-Voreinstellungen gibt es auch keine Möglichkeit.
    Sollte es tatsächlich nicht möglich sein, an wen könnte ich mich mit der Bitte der Implementierung für kommende Versionen bei Adobe wenden ?
    Grüße,
    Johannes1710

    Das hat mit dem Reader gar nix zu tun und da die Technologie nicht mal mehr von Adobe betreut wird, kannste da Mails schreiben, bis dir die Finger bluten und es wird sich trotzdem nix ändern. Die Rendereinstellungen werden auf Dokumentebene festgelegt von dem, der das Ganze erstellt und wenn der sich eben keine Mühe macht, dann werden nur die Standardeinstellungen genommen.
    Mylenium

  • Adobe Acrobat 9 prof. Vers. 9.5.5. Fehlerprotokoll

    Ich habe ein Problem mit Adobe Acrobat 9 prof. Vers. 9.5.5. Wenn ich eine pdf-Datei erstellen will (z.B. aus Dateien, Webseiten etc), erscheint regelmäßig ein FP:
    Funktion "Einstellungen-Datei wird geöffnet oder erzeugt" konnte nicht beendet werden, Datei entweder schreibgeschützt oder von einem anderen Benutzer verwendet….
    Ich klicke dann auf ok, und die pdf wird dann trotzdem korrekt erzeugt. Reparaturinstallation habe ich versucht, und benutzerdefinierte Einstellungen, die evtl. stören, sind nicht vorhanden.
    Hat jemand einen Rat?
    Viele Grüße

    Ich habe den Übeltäter inzwischen ausfindig gemacht. Ich habe ein älteres QuiteImposing als plugin installiert, und wenn ich das entferne, reagiert Acrobat wieder normal. Woran diese Unverträglichkeit liegt, weiß ich nicht, aber immerhin ist die Ursache damit zunächst geklärt.
    Danke und viele Grüße
    Winfried

  • Acrobat CS4 on iMac doesn't recognize scanner but Acrobat 6.0 does

    New iMac Snow Leopard OS; Creative Suite CS4 Designer edition.
    I purchased a new iMac with CS4 Designer edition (including Acrobat Professional) but when I tried to scan to Acrobat Professional it couldn't see the scanner and there were no devices visible. Luckily I still have the CS version of Acrobat (6.0) installed which DOES see the scanner, so I am able to scan to my Epson scanner using that software but I need to be able to scan into the CS4 version. It is not clear to me how to get the software to recognize the scanner.
    Can anyone give me a clue how to fix this?
    thank you

    You need a intel native driver. Otherwise it won't work in CS4

  • Mac and Acrobat 9 prof. e-mail

    Please excuse my bad english!
    I use snow leopard and Acrobat 9 prof. my e-mail rogram ist thunderbird-latest version . Whenever I try to send a pdf-document by mail or i want to create my own it appears the following: SendMail kann nicht mit Ihrem Standard-E-Mail-Client kommunizieren. Wählen Sie eine andere E-Mail-Anwendung aus.
    Is there someone being able to explain by little steps what i have to do?
    Many thanks
    Juergen

    A work around is to have the users create the PDF with AA6 compatibility (see the job settings). As an alternative, open the PDF in Acrobat and use either Reduce File Size or PDF Optimize to save the file to an AA6 version.
    They might also zip the files before sending them.

  • Error installing Acrobat 9 Prof on Win7  64-bit

    I bought a new HP laptop and loaded the other components of Creative Suite 4 Design Premium (Win 7  64 bit) with no issues.
    I then tried to install Acrobat 9 Professional (several times) and keep getting error messages saying that one or more components dd not load correctly.
    My antivirus was turned off and I rebooted after the first failed attempt. The 2nd attempt had the same results.
    I've seen others with the same issue while trying to load Acrobat 9 Prof.
    What is the "fix" to get this on my new laptop?
    Thanks

    Bill@VT I believe you are referring to the need for the CS applications to provide their licensing information so that Acrobat can be licensed as well.  This needs to occur before Acrobat is launched for the first time but does not affect the install order.
    Mike Sz01 were the remaining applications for CS4 able to be installed successfully?  You can review the installation logs for error messages by following the steps listed in Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Acrobat 6 Prof. will not open

    I'm using an older version of Acrobat - 6.0. It used to open fine but now gives me this error message and will not open: The currently selected language resources are not supported by the current version of Adobe Acrobat. Please reselect the language in the International System Preference panel.
    I'm using a Mac book pro. English is selected and has always been selected.
    Any idea how to get it to open?

    thanks
    From: Steve Werner <[email protected]>
    Reply-To: <[email protected]>
    Date: Mon, 17 Aug 2009 09:47:18 -0600
    To: Chuck Wallace <[email protected]>
    Subject: Acrobat 6 Prof. will not open
    Acrobat 6 Professional came out in July 2003. It may not open in later
    versions of Mac OS X. You should probably update to Acrobat 9 Professional.

  • After system re-install Acrobat 8 Prof does not work

    I had to install my Windows 7 pc. After this nasty procedure I cannot start Acrobat 8 Prof any more, window turns grey. Serial no. is available and no. of activations are not exceeded. Has anybody any idea what went wrong and how I can make use of Acrobat Prof again?

    Have you tried a repair from the Start>Control Panel>Programs & Preferences? If a repair will not do the job, then you my have to reinstall as a last result. If you do that, be sure to deacctivate, uninstall, remove the Acrobat folder if any parts left, run http://labs.adobe.com/downloads/acrobatcleaner.html, reboot, reinstall, and run updates. If a 64-bit system, the updates are an important part. If needed, they can be downloaded from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and installed in order.
    During installation, don't forget to be logged in as the administrator and disable anti-virus.

  • I have Acrobat 8 standard, I can not create PDF file any more. It stopps after 10%. This is happen after I have trayed Acrobat IX prof. demo. I have unstalled and reinnstalled Acrobat 8, the same problem are there. Can sombody help me.

    Problem to make PDF file, stopps after 10%?

    Hey Tom,
    Could you please tell me how have you been trying to create PDFs.
    What exact error pops up on your screen when it stops after 10%?
    Please specify more on what you mean by saying 'trayed Acrobat IX prof.demo' as I need to analyze what exactly is the trouble.
    Hope to get your response.
    Regards,
    Anubha

  • I cannot get Abobe Acrobat XI to recognize my Fujitsu S500 Scanner.

    I cannot get Abobe Acrobat XI to recognize my Fujitsu S500 Scanner.
      The scanner is installed and it's in the device manager but Adobe Acrobat does not show it as a choice under scanner selections.

    Having to install new printer drivers tends to imply going to a new OS.
    The Acrobat 7 product family is not compatible with any contemporary OS.
    For that you'd need the current release of Acrobat.
    Be well...

  • Acrobat 8 prof on win7 / 64bit

    is it possible to install acrobat 8 prof. on win7 / 64bit system?

    To my knowledge the earliest version you can go down to with Windows 7 is Acrobat 9.

  • Habe eine zusätzliche Tastatur für das iPad 2 gekauft. Jetzt weiss ich die Tastenkombination für das at-Zeichen nicht. Das at ist auf dem Buchstaben L.

    Habe eine zusätzliche Tastatur für das iPad 2 gekauft. Jetzt weiss ich die Tastenkombination fuer das at-Zeichen nicht. es befindet sich unter dem L.

    Well believe it or not
    As Larry says, it's a $15 app. For that you get a lot, but not everything. Perhaps if you pay more you'll get an application that does what you want. Aperture, for instance, can export projects and import projects from Library to Library.
    Regards
    TD

Maybe you are looking for

  • Songs greyed out in iTunes on iMac

    I have an album that I have played previously with no problem. Now, all the songs appear greyed out on my iMac and the album will not play. I can double-click on individual songs to play them but I can't play the album, nor will iTunes play the follo

  • Everything was fine last week now I cannot get my printer to respond everything is connected but the

    I have a HP Pavilion window 7 laptop computer and a Kodak 6150 all in one printer connected to my computer. Everything was fine I replace the ink cartridges, and allowed mycleanpc to do some clean up work on my PC because I believe I had a virus the

  • Unable to edit file properties in Search results

    When I access a folder normally, I'm able to update a file properties but if try the same from the search results the dialog is read-only.  I also can't open the properties dialog from Windows Photo Viewer, if the picture was opened from the search r

  • HP Pro 8600 error message for printing

    I just set up my 8600 and I cannot print. It is connected and I installed hardware. I also printed network test results and that is good too. I try to print from my laptop (already set security to medium) it says to check wireless?? Why can't I print

  • Prompt from another program is opening in Firefox

    When using Crystal Reports v.11 the query prompts for an input. This prompt is opening in Firefox. It is like the file extension is owned by Firefox.