Acrobat 9.0 PDFConverter toolbar missing in Excel 2003

For some reason the PDFConverter toolbar disappeared in my installation of Excel 2003. I remember an error message flashing up but apparently I didn't pay enough attention. That happens all to often unfortunately.
After an hour of searching several websites, including these adobe forums, I found a procedure that was written for Acrobat 7.0 but it also solved my problem with Acrobat 9.0. I added this thread in the forums with the intent of making it easier to find for the next person.
The answer I found is response #2 in this thread - http://forums.adobe.com/message/2152995
The question that began the thread is "Acrobat 7.0 Missing PDFMaker files and won't pdf files"
The answer was posted by user J.O.S. on August 4, 2009
The answer she/wrote is:
I have had this problem with nearly every version of Adobe Acrobat up to and including 9.0
Here are four things I do to resolve this issue in order of time/difficulty:
First, I made sure that the Adobe Acrobat plug-in wasn't disabled.
In any Microsoft Product such was Word, Excel, etc.  go to Help>About Microsoft (Word/project, etc) and then click on the 'disabled items' button.
If the plug-in is disabled, select it and enable it again.
Second,  I make sure the PDFMaker files are registered.
I open a command prompt and navigate to the PDFMaker plug-in dll files in Adobe.
In Adobe Acrobat 8.0  the file path is:
C:\Program Files\Adobe\Acrobat 8.0\PDFMaker\Office
I then type in:
regsvr32 PDFMOffceAddin.dll
That should enable the Office PDFMaker plug-ins.
Third, I make sure that the AcroDist.exe application path was configured properly in the registry.
If it isn't, I just create it.
Registry path:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths
Look for the entry "AcroDist.exe"
If not there, create it - it is a 'Key". (right click on App Paths and choose New>Key)
In the AcroDist.exe  key the (Default) value should be:
C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroDist.exe 
or
C:\Program Files\Adobe\Acrobat 8.0\Acrobat\AcroDist.exe
depending on which version of Adobe Acrobat you have.  Essentially you put the absolute path for the AcroDist.exe file in there.
The only other entry in the AcroDist.exe key should be the String Value Path.  If it isn't there, create it  (right click and choose New>String Value)
The name of the String Value should be Path and the value should be the path of the AcroDist executable.   e.g.:
C:\Program Files\Adobe\Acrobat 7.0\Acrobat\
or
C:\Program Files\Adobe\Acrobat 8.0\Acrobat\
Close out the registry and try to use the PDFMaker again
If that still doesn't work then I run a repair on Adobe.  If THAT doesn't work then I completely uninstall/reinstall.

In Adobe acrobat pro, go to the Edit/Preferences menu and select the internet menu and make sure the Display PDF in browser item is checked.
Click the Internet settings button and go to the advanced tab and make sure the Enable third-party browser extensions is checked.
THen open the 32 bit version of IE9.

Similar Messages

  • PDFmaker files missing using Excel 2003

    I have a workstation that gets the "PDFmaker files missing" message whenever using acrobat to create a Excel 2003 file PDF.
    Using Office 2003 and Acrobat 8.1.3 on Windows XP SP3
    I have seen may posts on this but have not seen a resolution.  Has this been resolved??  If so what is the solution??
    Yes we can print to a PDF from Excel but the user wanted to just use Acrobat instead of having to load the files in Excel each time.
    Thanks  Jack
    Message was edited by: Jack1376

    Having the same problem here.  Doing a repair install did not fix it.
    Vista 32-bit with 9.4.4 acrobat installed. 
    I have a test machine that is also Vista 32-bit with 9.4.3 and confirmed that it indeed does work.  Going to update that machine and see if I can duplicate the issue.
    Printing to PDF did work tho with 9.4.4.

  • Acrobat XI IE 9 Toolbar/add-on

    I am using IE 9 (64 bit) and just installed Acrobat XI and the toolbar/add-on is missing.  Is the conversion option not available.  The only Adobe add-on that shows upis the shockwave player.

    http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

  • Adobe Acrobat 9 Pro - Form Toolbar

    There has been a big change from Acrobat 8 Pro to 9 Pro regarding how the forms toolbar is displayed.  While the changes are a great improvement to make it easier to create forms...I am having trouble adjusting to editing forms.  Is there any way to have the forms toolbar display on the regular view so that you do not have to keep going to the button to click add/edit forms and then get a new screen.  I just want to work from the same view and not have to go back and forth when I am working on a form that is already created.  I thought maybe it would be a "right click" or some kind of preference but so far I cannot find any way to change this.  I would appreciate any help!

    Thank you for the response.
    Do you know what the logic was to make such a dramatic change - since all the previous versions of Acrobat permitted the forms toolbar in the regular view?  They must have thought this format was better.  Any ideas?

  • Adobe Acrobat 9 STD, commenting toolbar

    Hi,
    I've got an issue, when trying to review and comment on a PDF in internet explorer, the commenting toolbar doesn't appear. therefore i cannot comment and review pdf's.
    O.S. is Windows 7.
    Internet explorer 8.
    Adobe Standard 9.
    I've done some troubleshooting by install Adobe 7 STD and Adobe 9 PRO, Both of these the commenting toolbar shows but not with Adobe 9 STD.
    I've been struggling with this for the last two days, please help.

    Thank you for the response.
    Do you know what the logic was to make such a dramatic change - since all the previous versions of Acrobat permitted the forms toolbar in the regular view?  They must have thought this format was better.  Any ideas?

  • 4.01 is a disaster; cant open tools/addons; wont restart in safe mode, toolbars missing when opening or moving to a new window.

    Subject line covers most of the question. Version 4.0 worked fine. I've uninstalled and reinstalled 4.01. No change. Tools, Addons doesnt reveal addons. New window opens with some toolbars missing and a blank page.
    Using tabmix plus; maybe that's an issue? Using Default theme. But these were fine in 4.0
    How can I revert to version 4.0? or the last release of 3?

    I had this problem as well - it was caused by a complex session with multiple tab groups, some of which needed authentication. I made a copy of my Profile and then deleted the session files, and Firefox came right up.

  • Adobe pdfmaker 6.0 is missing in Outlook 2003

    Hi,
    I have users running XP Pro with Office Small Business 2003 with SBS 2003 server.  I have some users at this point that doesn't have pdfmaker toolbar in their Outlook 2003 but appear in Word 2003.  We have Adobe Standard 6.0.  As per the user, they had it but now the pdfmaker is missing from outlook 2003.  However in the mean time they can print to Adobe PDF from "File" menu on top left and select "Print" then selecting "Adobe PDF" to email file to
    pdf.  How can I enable or get the pdfmaker back on Outlook 2003.  Word and Excel have pdfmaker toolbar appear.
    I did the following steps:
    I checked the disabled item and nothing was listed.  then I checked in "Add-In Manager" and "COM Add-Ins" and didn't see pdfmaker or something like that.  I even tried to add "PDFMOultook.dll" in "COM Add-Ins" from Adobe folder and that didn't get added.  Then I removed "OutlVisible" key or changed the data value to 0 and rebooted the PC.  But that didn't do anything, so I restore the registry that I backed up.  I even reinstalled Adobe Standard 6 and the whole office in the beginning.  Hope someone has another solution for this.
    Thanks,
    Ankur

    There is a patch - but whether it will fix your particular problem, I don't know.
    More details here:
    http://blogs.adobe.com/insidesound/2012/07/adobe-audition-cs6-5-0-1-update-patch-released. html#.UFyg0q7F03g

  • Problem opening BEx Analyzer Workbook (saved in Excel 2007) in Excel 2003!!

    Dear all:
    I know there are threads about this issue and numerous support tickets have been provided, but we still can't get any Excel 2007 Query to be opened by Excel 2003.
    I have tried to save Excel 2007 BEx Analyzer Query into 97-2003 XLS format. But when we reopened (by both Excel 03 and 07), it prompted the warning messages and broke down the query workbook into several sheets with scrambled data. What am I missing here...? According to the support ticket, it seemed pretty straightforward just by saving the format to 2003 XLS, but in reality it just doesn't work as "advertised"
    Thank you...!!!
    Brian

    I have the solution for this.
    It works to my environment.
    Follow the steps :
    1. you must open the xlsx workbook from Bex Analyzer.
    2. Save As workbook locally to your PC for excel 97-2003
         (Not "save as" from bex Toolbar but from      excel)
    3. Now save that workbook with Save As->Workbook from Bex Toolbar into your BI database.
    Now go to detail properties of your workbook and there you can see the format xls for your workbook.
    Good Luck

  • ? Office 2013 to support Excel 2003 (XLS) spreadsheets containing VBA CommandBars references

    Thanks in advance for reading this and offering any wisdom you have! I am not an expert in any of the following, so apologies if off base.
    The basic problem is: I need to use Excel 2013 to support Excel 2003 (XLS) spreadsheets containing VBA 'CommandBars' references which don't seem to work in Excel 2013. Details below.
    Most of our users are still using older desktop windows PCs and Office 2003!  We are beginning to upgrade to laptops running Windows 8.1 with Office 2013.  Of course, we IT technical people are using the new laptops first. These new laptops are
    64 bit.
    Years ago, someone did a lot of development with spreadsheets here in Excel 2003 file formats that automates many activities and routines. Now we with the new laptops are having to support this development using new machines.
    There is a basic compatibility issue that appears when first opening these Excel 2003 files that have VBA code that I'll detail below; I seem able to get by that problem.
    The current problem appears to be that the existing Excel 2003 VBA code has many references to: "For Each bar In Application.CommandBars". As I've learned, the Application.CommandBars VBA functionality is focused on older MS Office versions' menu
    commands, but "...Starting from Office 2007 the Fluent UI is used instead."  In other words, because MS Office isn't menu-driven beginning with version 2007 (uses 'the ribbon'), it appears that these references to: "For Each bar In Application.CommandBars"
    create a basic incompatibility to opening these spreadsheets in Office 2013.
    For a spreadsheet, after I resolve the issue detailed below and save it, when I reopen it I encounter error "Compile error: can't find project or library." 
    For example, the following code snippet:
    Private Sub Workbook_Open()
    For Each bar In Application.CommandBars
            bar.Enabled = False
        Next
    results in: "Compile error: can't find project or library." 
    (Sorry, can't include images yet, I am not a VERIFIED USER of this forum yet.)
    I went into VBE's menu: Tools>References and check for anything marked MISSING, which I deselected. But I am still receiving this error.
    I don't want to get into changing the code a lot to support both Excel 2003 and 2013 (I am no VBA expert, just a dabbler).
    And Microsoft officially says that Office 2003 is incompatible with Windows 8 although Application.CommandBars seem to be somewhat supported in Office 2013 .
    Are you aware of a quick VBA workaround to get by this?
    •I could comment out the validations, commands for: "For Each bar In Application.CommandBars" but then the spreadsheet code probably won't work for users using Office 2003.
    Alternatives would be:
    •Installing Office 2003 on my Win 8.1 64 bit laptop anyway, in spite of MS's saying incompatible, since this thread discusses at least one person has been able to use Office 2003
    •Keeping one older PC with Office 2003 on it for us to support the old Office 2003 code until everyone upgrades their systems
    Thanks
    Basic compatibility issue that seems solvable:
    Opening these spreadsheets displays this error:
    Compile error:
    The code in this project must be updated for use on 64-bit systems.
    Please review and update Declare statements and then mark them with the PtrSafe attribute.
    This seems resolvable by going into the VBA code and just adding element 'PtrSafe' where functions are declared; in other words, replacing VBA code "Declare Function" with "Declare PtrSafe Function" seems to get by this.

    Hi Allan_L,
    Please try the methods that provided above. And this is the forum to discuss questions and feedback for Microsoft Excel, your issue is related to Excel DEV, if you have further question, I recommend you post the question to the MSDN forum for Excel
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Printing Excel Instance from InfoView using Excel 2003

    Hi
    I have problem with printing Excel instance within InfoView. We are using Active X as viewer - but when user schedules report in Excel and when it opens that instance - it opens in Web Excel viewer within InfoView. At that point there is no standard menu if user uses Office 2003 or actually Excel 2003 on its own machine so user cannot print instance. Can anybody help with this. If you try to open instance on machine that has Office 2007 there are no problems since instance gets open in full Excel.
    Thanks

    What version of Crystal Reports are you using?  Any service packs or hot fixes installed?
    Can you open other xls files with 2007?  
    Have you ever exported to excel before?
    I export to -excel (97-2003) data only- and open the files with Excel 2007 with no problems. Excel 2007 complains about the old format (xls) and wants to convert it to the new excel format. I alsways ignor it.
    Maybe the 'garbage' you are seeing is because the layout of your crystal report is not working for the export. Is all the data there but you have extra cells and/or lines, or the data is pushed to the left? I find that I must have the fields packed tightly with no space between them and no space above or below the fields, or I get extra cells between and lines above or below them.
    Most of my exports are detail lines with a single line header and columns are set to match the detail line. When exporting multiple lines where the fields do not line up exactly with the ones above them, I may use one or more empty text fields that matches the size of the fields above them to fill the empty space. Sort of like:
    line 1:{field1.}{field2...}{field 3}
    line 2:(text...}{text.....}{field 4)
    And you may need to turn off 'can grow' on all fields as they may cause miss-alignment. All the data will be there when you export it, even what you can not see in Crystal. You will just need to format the cells in Excel to see it.
    Debi  (hi Don)

  • Error message in excel 2003 : compile error in hidden module could be caused by Adobe Acroate add in

    The error message in excel 2003 : "compile error in hidden module AutoExecNew" could be caused by Adobe Acroate add ins, thats waht microsoft told me.I use windows xp service pack3.I have got reader newest version and photoshop 6.0. With this and also with an older reader version I got the error message when opening excel. what can I do?
    Best regards Ray

    If you have Adobe Reader, you (probably) don't have Adobe Acrobat, a
    commercial ($$) product. 5.0 is a very old release.
    But you can check if the files are there anyway from long ago. See
    http://support.microsoft.com/kb/307410
    Aandi Inston

  • Crystal 2008 and VBA in excel 2003

    We have currently crystal reports in VBA form in excel 2003 using Crystal XI Release 2. when I tried to migrate this report to "Crystal Report 2008 SP2" in VBA, I only found following reference 12.0 library
    Crystal Activex Report Viewer Library 12.0 (Crviewer.dll)
    but I couldn't find any reference library for (Craxdrt.dll) for crystal XI Release 2 it use to be
    "Crystal reports Activex Designer Run Time Library 11.5";
    so If i use 12.0 CRViewer.dll in VBA then I can create report object for it if "Craxdrt.dll"; is missing.
    thanks

    Hello,
    This is a [duplicate posting|crystal report 2008 and VBA in excel 2003;.Please do not cross post the same question to multiple forums. Here's a link to the [Rules of Engagement|http://wiki.sdn.sap.com/wiki/display/HOME/Rules%20of%20Engagement] for reference.
    Sincerely,
    Dan Kelleher

  • Unable to see the Hyperion tab in Excel 2003

    Hi Hyperion gurus,
    Can anybody shed light on an issue that a user encountered with Smartview? This user installed Smartview and had been using it without any problems. We just started parallel testing and he needed to use Smartview as part of the process. He is now unable to see the add-in in Excel 2003. He has no Hyperion tab and we cannot find any evidence that it has been installed. We reinstalled Smartview but even after reinstalling Smartview he is still unable to see the Hyperion tab in Excel. What is puzzling is that he does have the Hyperion tab in Word and is able to connect.
    Would appreciate any help provided? Thanks.

    I have seen the same exact problem at my company regarding the missing Hyperion tab in Excel (but present in MicroSoft Word). If you go into Excel, then select 'Help', then About MicroSoft Excel, then you'll see 'Disabled Items'. Scan the list for HSAddin.Dll. If this is on the list, highlight it, then select the 'Enable' button. (this is my first suggestion). I've also had to do the following in some isolated cases:
    You should also try re-registering the following 3 SmartView DLL files. To do this, simply locate where these 3 files are stored on your local machine (the file names are):
    HSAddin.dll
    HSSpread.dll
    HyperionSmarttag.dll
    Usually these are stored within the following path: C:\Hyperion\Smartview\bin
    To Register the files:
    Open DOS (start->run->cmd) and change your path to C:\Hyperion\SmartView\bin
    Type in the following, hitting enter key after each line:
    regsvr32 hsaddin.dll
    regsvr32 hsspread.dll
    regsvr32 hyperionsmarttag.dll
    You should receive a 'success message' for each file you register. Reboot your machine following this, and go back to Excel. Your menu should now be in place.
    Thanks,
    James Pryal

  • Anyone seen this problem with Excel 2003?

    We're developing a Microsoft Excel-based app. The help system uses HTML Help (.chm) format, and works just fine with Excel 2007 and 2010. However, since a lot of potential users out there are still using older versions, we've been asked to adapt the app for Excel 2002 and 2003.
    The help system works, more or less, with Excel 2002, but when we try it with Excel 2003 the tri-pane is missing. The default topic appears but the left-hand pane containing the navigation system (TOC, Index and Search) is missing. Consequently, users can't move away from the default topic. Has anyone come across this problem before, and do you know how to fix it?

    I cannot help you with this one other than to say I haven't seen any other such reports. That may suggest it is worth checking for some small difference you haven't identified yet.
    Of course it could also mean there aren't many people with that workflow.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How can i export excel 2003(Version 11) from Crystal Report 8.5

    how can i export report to excel 2003(Version 11) from Crystal Report 8.5

    We i can only see below formats
    Acrobat Format (PDF)
    Character-separated values
    Comma-separated values (CSV)
    Crystal Reports (RPT)
    Crystal Reports 7.0 (RPT)
    Data Interchange Format (DIF)
    Excel 5.0 (XLS)
    Excel 5.0 (XLS) (Extended)
    Excel 7.0 (XLS)
    Excel 7.0 (XLS) (Extended)
    Excel 8.0 (XLS)
    Excel 8.0 (XLS) (Extended)
    HTML 3.2
    HTML 4.0 (DHTML)
    Lotus 1-2-3 (WK1)
    Lotus 1-2-3 (WK3)
    Lotus 1-2-3 (WK5)
    ODBC - AddressBook
    OBDC - CRGUP
    OBDC - CROR8V36
    OBDC - CRSS
    OBDC - CRXMLV36
    ODBC - dBASE Files
    ODBC - Excel Files
    ODBC - MS Access Database
    ODBC - Visio Database Samples
    ODBC - Visual FoxPro Database
    ODBC - Visual FoxPro Tables
    OBDC - Xtreme Sample Database
    Paginated Text
    Record style (columns no spaces)
    Record style (columns with spaces)
    Report Definition
    Rich Text (Exact Format)
    Tab-separated text
    Tab-separated values
    Text
    Word for Windows document
    XML
    there is no format with "Microsoft Excel 97-2000 (XLS)"
    what should i do?

Maybe you are looking for

  • How do I see the applications I installed from marketplace on dektop Aurora?

    I am using Aurora 22a2 on desktop I was trying some marketplace apps. Problem is that there is no UI to maanage/launch/uninstall these apps. To launch these apps I have to go to marketplace website, search the app and then launch it from its page.

  • Product and SWCV best practice

    We have a 3rd party Product  that tend to change product versions frequently as once in 3-5 month. as SAP Software logistics mechanisem is based on hierrachy of Product->product version->SWCU->SWCV My quesion is : what is the best way to maintain thi

  • On signing in, get error message 400.  How do I fix this?

    Problem signing in to Photoshop Elements 9.  Get error message 400.  Also can't create new user ID. Help!

  • Force logout a managed user?

    Hi all I'm running an OD server with 10 clients connected (all 10.4.6, clients and server). Users, groups and computers are managed, and simultaneous login is disabled for all users. My question: How can I (forcibly) log a user out? You know, as you

  • Netbeans says "A suitable JVM could not be found", where to get one?

    Hi, I am trying to install Netbeans 4.1 on WinXP, and whenever I try, I get an error saying that a suitable JVM could not be found. Where can I get a suitable JVM? I scoured the site, but couldnt find anything to indicate where to download a JVM. Mel