Acrobat 9.0 Pro locks up after 30 seconds.

Problem signature:
Problem Event Name: AppHangB1
Application Name: Acrobat.exe
Application Version: 9.0.0.332
Application Timestamp: 4850eb76
Hang Signature: 8d74
Hang Type: 1
OS Version: 6.1.7600.2.0.0.16.7
Locale ID: 1033
I have searched for a resolution but have come up empty. Anyone?

Hi chicagosdoubleb,
Which OS are you using?
Have you tied updating Acrobat 9 to the latest patch 9.5.5 and checked?
Please check the performance in a new Admin account too.
When was the last time it worked fine for you.
Did you install any new software / antivirus that might have caused this.
Regards,
Rave

Similar Messages

Acrobat Pro 8 Crashes after 7 seconds.

Does anyone know which of these updates causes Acrobat Pro 8 Crashes after 7 seconds.
My OS is Windows 7 Ultimate x64 SP1:
Thank you.
Harry.

AA8 is not certified for Win7, and particularly the 64-bit version. Several folks have been successful on the install on 32-bit systems. I have heard of 2 folks who claimed success on the 64-bit system. To have a change, first check to be sure you have Acrobat, Distiller, and the Adobe PDF printer on your system. Since Acrobat is not opening, go to http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and download the updates (start with the latest and work backwards. Each update screen will tell you the previous one needed for the update (you may be able to skip 2 or so). Once done start the updates from the bottom up. You should do the updates through 8.3.1. Generally speaking you only need to do a reboot after the final update installed, not for all the updates.
The updates are definitely required for the 64-bit system and may be the issue you are having. There is no way to be sure if the install will work, only the comments by others that have tried.
During the installs and updates, be sure you are logged in as the adminstrator and have anti-virus disabled.

On starting up, my macbook pro shuts down after 25 seconds of booting up.

Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Acrobat 9 Pro Extended autoclose after 10 seconds

When I open acrob, it seems ok but after 10 seconds it closes. Does somebody know why ?
Thank You

You have an activation issue. When you launch the program it is going out to check on activation. This is failing and so the program closes. The solution to your issue most likely lies in the TechNote below:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
Ignore solution #1 as you are using Acrobat 9. Start with solution #2. Good Luck!

Mac Book Pro locks up after initial boot-up

I have a late 2011 Mac Book Pro, 2.4 GHz running OS X 10.9.2. During normal operations I am typically using 4-5 GB of RAM. I have a 750 GB hard drive with 671 GB of free drive space. After a normal boot-up the computer completely locks-up/freezes and I get the pin wheel indefinately. I have tried the following items so far in an attempt to rectify the issue:
1) Reset NVRAM
2) Verfied that the issue remains with and without external keyboard, mouse, network cable and thunderbolt display attached.
3) Verfied that there is no disk in the optical drive.
4) Started up via the Recovery drvie and ran all disk utilities (repair disk, verify disk, and repair permisisons). Both repair disk and verfiy disk came back without any issues noted. Repair premissions came back with some iBooks errors that it said it fixed. This has not corrected my problem.
5) Resinstalled the entire OS from the disk utility in Recovery Mode. This seemed to correct my problem for almost a week but the same issue started happening again.
It should be noted that this issue started within a day or two of loading the 10.9.2 update. The machine appears to run fine from Safe Mode, which I am using now to write this message. I was also able to use Safe Mode to run a web conference at work this morning with out any additional issues so I can't believe it is a hardware issue.
Any help and/or suggestions would be greatly appreciated.

Well I ran it from safe mode and these are the results:
Hardware Information:
          MacBook Pro (15-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2.4 GHz Intel Core i7 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6770M - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:12:57
Disk Information:
          APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (670.88 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Startup Items:
          PKard: Path: /Library/StartupItems/PKard
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.mcafee.ssm.Eupdate.plist 3rd-Party support link
          [System] com.mcafee.ssm.ScanManager.plist 3rd-Party support link
          [System] com.mcafee.virusscan.fmpd.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
          [System] com.citrix.AuthManager_Mac.plist 3rd-Party support link
          [System] com.citrix.ReceiverHelper.plist 3rd-Party support link
          [System] com.citrix.ServiceRecords.plist 3rd-Party support link
          [System] com.mcafee.menulet.plist 3rd-Party support link
          [System] com.mcafee.reporter.plist 3rd-Party support link
          [System] com.thursby.pkard.tokendagent.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Activity Monitor
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
          AdobePDFViewer: Version: 10.1.9 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          net.juniper.DSSafariExtensions: Version: (null) 3rd-Party support link
          CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
          Evernote Web Clipper: Version: 6.0.5
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.60 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 73.03 GB
          Destinations:
                    Time Machine [Local] (Last used)
                    Total size: 148.73 GB
                    Total number of backups: 13
                    Oldest backup: 2014-03-12 18:39:36 +0000
                    Last backup: 2014-03-18 19:23:03 +0000
                    Size of backup disk: Too small
                              Backup size 148.73 GB < (Disk used 73.03 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              59%          mdworker
               2%          mds
               2%          EtreCheck
               2%          WindowServer
               1%          ps
Top Processes by Memory:
          172 MB          com.apple.WebKit.WebContent
          147 MB          com.apple.IconServicesAgent
          90 MB          Safari
          74 MB          CalendarAgent
          66 MB          WindowServer
Virtual Memory Information:
          5.29 GB          Free RAM
          1.74 GB          Active RAM
          340 MB          Inactive RAM
          645 MB          Wired RAM
          241 MB          Page-ins
          0 B          Page-outs

MacBook Pro locking up after fresh install...

I was givin a MacBook Pro (A1276) at my old job because we had a customer that didn't want to pay for repairs and just was sick of looking at it. So I took it on as a project. Now I'm quite seasoned with PC's and Windows based software, but Mac and OSX I've never had to work on at this level. So I'm lost. This system has a Core2 Duo @ 2.40GHz, 4GB DDR3, 500GB Toshiba HDD, GeForce 320M... anything short of slow. Esspesialy for an operation system that makes better use of it's resources than say, Windows.
Now, originally, it was running so slow, a reinstall of OSX (Mavericks) over the internet via recovery, wasnt even possible. ANY thing you tried to do, would start the system beachballing non-stop. It would just sit like that for hours. After opening the laptop up, reseating ALL visable connections on the mainboard, everything started to work. I was finally able to complete a restore using Mavericks and got it up and running like a hot knife through butter. Now, after about a day or so of use, it starts acting up again. You open ANYTING, and it locks up and starts beachballing again. I've reinstalled OSX 5 times now, same thing each time. Works for a while, then is unuseable. But before I couldnt even do that much. Now I started to think it is the HDD, but it always passes every test I run. I dont know what to try next. The system isnt running hot, and nothing is eating at the CPU. It just, locks up... Someone help me!

This is my current output stat...
Boot Mode: Normal
Kernel messages:
   May 16 20:51:11   disk0s2: I/O error.
Extrinsic system jobs:
   com.adobe.fpsaud
/Library/LaunchDaemons:
   com.adobe.fpsaud.plist
Extrinsic loadable bundles:
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
Modified periodic scripts:
   /etc/periodic/daily/110.clean-tmps
   /etc/periodic/daily/130.clean-msgs
   /etc/periodic/daily/140.clean-rwho
   /etc/periodic/daily/199.clean-fax
   /etc/periodic/daily/310.accounting
   /etc/periodic/daily/400.status-disks
   /etc/periodic/daily/420.status-network
   /etc/periodic/daily/430.status-rwho
   /etc/periodic/daily/999.local
   /etc/periodic/monthly/199.rotate-fax
   /etc/periodic/monthly/200.accounting
   /etc/periodic/monthly/999.local
   /etc/periodic/weekly/320.whatis
   /etc/periodic/weekly/999.local
Restricted user files: 2
Elapsed time (s): 47

Mac Book pro locks up after pressing restart button at login.

I have a MacBook Pro, and I was just logging into my computer when I decided instead of putting my password into the login screen I clicked the back button, I then proceeded to press the restart button from the login screen to restart my computer, but then the courser disappears and the screen starts to darken slowly, (and not from the monitor's lights dimming), from top to bottom. A gray message pops up with a picture of a mac power button behind it and typed in all different languages it says, "Please hold down the power button for a few seconds to shutdown your computer." or something like that. I am sure it is an official message from apple and I have had this before but I think this is a major bug that apple might have missed or maybe I just haven't heard of the solution yet. BUT IT ONLY HAPPENS WHEN I ATTEMPT TO RESTART FROM THE LOGIN SCREEN. If anyone is having this same problem I would like to hear about it or if you have any suggestions on how to fix this issue that would be great, Thanks.
PS: This error does not seem to affect my friends mac book.

I have a MacBook Pro, and I was just logging into my computer when I decided instead of putting my password into the login screen I clicked the back button, I then proceeded to press the restart button from the login screen to restart my computer, but then the courser disappears and the screen starts to darken slowly, (and not from the monitor's lights dimming), from top to bottom. A gray message pops up with a picture of a mac power button behind it and typed in all different languages it says, "Please hold down the power button for a few seconds to shutdown your computer." or something like that. I am sure it is an official message from apple and I have had this before but I think this is a major bug that apple might have missed or maybe I just haven't heard of the solution yet. BUT IT ONLY HAPPENS WHEN I ATTEMPT TO RESTART FROM THE LOGIN SCREEN. If anyone is having this same problem I would like to hear about it or if you have any suggestions on how to fix this issue that would be great, Thanks.
PS: This error does not seem to affect my friends mac book.

Macbook pro locks up after doing the simplest tasks!

I seriously don't understand this. I am editing HDV, the most consumer cost efficient format available. I am doing a somewhat easy task - optical flow retiming in motion....ok no CG or crazy graphics, and my computer has locked up twice already. How are movies being made on the mac but I can't even slow a clip down without having to force shut down my entire machine I've got 3 gigs of ram....which should be enough....and I'm running the latest version of everything.

I am editing HDV, the most consumer cost efficient format available.
And yet one of the most processor intensive codecs out there. Decoding HDV for editing is very difficult...GOP and all that.
I am doing a somewhat easy task - optical flow retiming in motion
That is hardly a simple task. Just because it is a few clicks on your end, doesn't mean it is easy. That is pretty processor intensive in its own right...then you add the HDV codec. Yeah, I can see why the machine crashed.
This is why people capture HDV as other codecs, like DVCPRO HD and ProRes. MUCH easier to deal with.
Shane

Macbook Pro shuts off after few seconds of gray screen

Help - I came home to discover my power cord had died and my laptop turned off due to no power. I used a friend's power cord to turn it on later that night and send some emails. I bought a new power cord the next day, plugged in, and turned the laptop on. It stayed on the gray screen with a spinning wheel beneath the apple logo for a while. I restarted it and it turned off after a few seconds of the gray screen. An empty bar flashes twice horizontally at the bottom before the spinning bar begins.
I tried booting in safe mode, but it would just stay on the gray screen. I tried doing shift+command+v and received a message about keys out of order and disk error full, can't repair. I was able to boot from the install disc, and when I click "Repair Disc" I get the same erros. Not sure what to do now?

Migg7 wrote:
Would my time machine data be preserved with this?
Well this is the big gamble. You really don't know for sure.
TimeMachine has gotten corrupted from a failing original drive and then unable to restore properly to a new drive.
It's not like you can access the files on a TM drive directly and cherry pick what you need and leave the rest. It's all or nothing.
If you go erasing your only other copy on the boot drive, which the files still could be accessed from another boot drive, and if you find out the TimeMachine drive can't restore, then your up the creek without a paddle right?
So if your able, create a data recovery drive and try to rescue your second copy of the files on the boot drive or restore the TM drive to the second boot drive , so this way your files can be accessed directly if you need it and you have two copies again.
Once you can direclty access your files then you can go about erasing and installing on the internal boot drive.

Mac Pro shoot down after few seconds

Hallo, mein Mac Pro 2008 hatte ein ähnliches Problem schon mal während seiner Garantiezeit. Wurde von Gravis repariert. Leider hat mich damals nicht interssiert was es war.
Nach dem Start schaltet er nach wenigen Sekunden aus. Manchmal läuft er auch länger, bevor der Bildschirm schwarz wird und das Gerät in den Ruhezustand übergeht. Es liegt nicht an den Systemeinstellungen, die Energiespareinstellung sind auf eine Stunde eingestellt. Die Garatiezeit ist abgelaufen und eine teure Reparatur ist momentan weit außerhalb meiner Möglichkeiten.
Wie kann ich feststellen woran es liegt? Gibt es irgendwelche Lämpchen, die mir anzeigen welche Fehlfunktionen laufen? Womit es zusammenhängen kann. Die PSU habe ich heute ausgetauscht, (aus USA heute angekommen, soll neu sein, hatte auch keine Gebrauchspuren was bei über 300 € eigentlich auch zu erwarten war), also an der PSU lags nicht. Woran kann es liegen? Wie erkenne ich: ist es die Hauptplatine, sind es die Heatsinks oder die Northbridge, was wird die Funktion bald völlig einstellen? Oder was auch immer es sein mag.
Bitte teilt mir das Geheimnis mit, wenn ihr es kennt.
Mit besten Grüßen Bernhard

Hallo, mein Mac Pro 2008 hatte ein ähnliches Problem schon mal während seiner Garantiezeit. Wurde von Gravis repariert. Leider hat mich damals nicht interssiert was es war.
Nach dem Start schaltet er nach wenigen Sekunden aus. Manchmal läuft er auch länger, bevor der Bildschirm schwarz wird und das Gerät in den Ruhezustand übergeht. Es liegt nicht an den Systemeinstellungen, die Energiespareinstellung sind auf eine Stunde eingestellt. Die Garatiezeit ist abgelaufen und eine teure Reparatur ist momentan weit außerhalb meiner Möglichkeiten.
Wie kann ich feststellen woran es liegt? Gibt es irgendwelche Lämpchen, die mir anzeigen welche Fehlfunktionen laufen? Womit es zusammenhängen kann. Die PSU habe ich heute ausgetauscht, (aus USA heute angekommen, soll neu sein, hatte auch keine Gebrauchspuren was bei über 300 € eigentlich auch zu erwarten war), also an der PSU lags nicht. Woran kann es liegen? Wie erkenne ich: ist es die Hauptplatine, sind es die Heatsinks oder die Northbridge, was wird die Funktion bald völlig einstellen? Oder was auch immer es sein mag.
Bitte teilt mir das Geheimnis mit, wenn ihr es kennt.
Mit besten Grüßen Bernhard

Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

Greetings all,
I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
I checked the "security settings (enhanced)" tab but the protected view option is already off.
I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
The problem occurs when:
I open up a pdf file from outlook etc.
I manually open a pdf file from windows explorer
I open adobe acrobat with no file to view
As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
Thanks,

Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck

Error 1310 - error writing to file c\program files\adobe\acrobat 7.0\activex\acroPDF.DEU - verify that you have access to that directory. this messages appears when i am trying to install acrobat 7.0 pro after I have downloaded the version from adobe

This message appears whenI am installing the copy of acrobat 7.0 pro downloaded from your website Download Acrobat 7 and CS2 products.

Are you trying to
* reinstall it on an old system
* reinstall it on a new system
* install it for the first time?
What version of Windows?

Source application not available - Acrobat 7.0 Pro after reader 9 update

I updated reader to 9.0 and now my Pro 7.0 is showing "installaion source for this product is not available" . It shows this when I try to open the program, uninstall, reinstall with cd. Help.

With Acrobat 7.x you ought to be able to have Adobe Reader 7.x.
I have been able to have the same version Adobe Reader/Acrobat Pro on local machines.
Each occurance has been/ is faithfully maintained updated.
Acrobat 4.x & Acrobat Reader 4.x
Acrobat 5.x "Full" & Acrobat Reader 5.x
Acrobat 6.x Pro & Adobe Reader 6.x
Acrobat 7.x Pro & Adobe Reader 7.x
Acrobat 8.x Pro & Adobe Reader 8.x
Acrobat 8 3D & Adobe Reader 8.x
Acrobat 9 Pro Extended & Adobe Reader 9.x
There is likely something in the inner swirl of dancing "1's" & "0's" that will cause a stumble.
Either it's happened and I've not noticed or I've not yet encountered it. A and a knock on the wood between my ears .
At one time, for a specific task, I had Acrobat 5.x "Full" and Acrobat 7.x Pro on a laptop.
While I was able to accomplish the specific tasks needed, I noted that integration with the installed Office suite took a hit.
You may want to obtain the Windows cleanup uninstaller.
It has been referenced here in other posts.
You may need to use it.
Be well...

DVD Pro 3 locks up after completing the format phase can anyone help?

I am very experienced with FCP & DVDSP3. However, starting this week my entire computer locks up after I start to burn a dvd in dvdsp3? I have tried everything I can think of please help. I have burned several dvd's using same footage. I thought maybe the disk were dirty (fingerprints etc.) I have tried several dvd's but nothing works. Help please!!

Yes the project was built by me. I have burned several copies from the same file. After about the 10 copy it started to freeze. My disk drive would keep running but it sounded as if it was stuck. The program stopped responding at this point. I'm using Apple DVDRW. I also tried using Maxwell (poor decision). Do you think it's the program or the dvd burner (hardware). thanks for the help.

FillFormCS sample and Acrobat 9.0 Pro

I have an application that is similar to the SDK sample application FillFormCS. I just upgraded from Acrobat 7.0 Pro to Acrobat 9.0 Pro. Both my app and FillFormCS worked with 7.0, but with 9.0 they give me the same exception: "No document is currently open in the Acrobat Viewer".
The problem seems to be connected to the avDoc's Open() and OpeninWindowEx() functions. The document never really seems to get opened.
Can anyone tell me if FillFormCS is supposed to run correctly with Acrobat 9.0 Pro when built from Visual Studio 2008? Visual Studio upgraded the solution and source files automatically. The references to the type library and ActiveX control seem fine.
If the problem is with VS 2008, can anyone suggest what I could do since VS 2005 isn't an option?
Thanks for any help you can give me.

OK, I have an answer, after more than two weeks and finally spending $200 for Developer Support, it turns out that for Acrobat 9.0, you have to call Show() after the Open(), not before, to get everything to work right. Here's a snippet of FillFormCS.cs that works:
static void Main(string[] args)
String FORM_NAME = Application.StartupPath + "\\SampleForm.pdf";
// Initialize Acrobat by cretaing App object.
CAcroApp acroApp = new AcroAppClass();
// Show Acrobat Viewer: Don't do this before the Open()!
//acroApp.Show();
// Create an AVDoc object
CAcroAVDoc avDoc = new AcroAVDocClass();
// Open the pdf
if(avDoc.Open (FORM_NAME, "") == false)
string szMsg = "Cannot open " + FORM_NAME + ".\n";
//Console.WriteLine(szMsg);
MessageBox.Show("Cannot open " + FORM_NAME);
return;
// Show Acrobat Viewer: Now you can do it.
acroApp.Show();
// Create a IAFormApp object, so that we can access the form fields in
// the open document
IAFormApp formApp = new AFormAppClass();
Also, if you want to use OpenInWindowEx() rather than Open(), you have to be sure to Lock() before you open and UnlockEx() after.
Good luck.

Acrobat 9.0 Pro locks up after 30 seconds.

Similar Messages

Maybe you are looking for