Acrobat 9 bug with printing problems

Hello, Acrobat 9 seems to have a bug when printing pdf files. Only the first page is printed. I tried on my Kyocera 2525E and my HP 2600N. Does anyone know a solution ?

This seems to be a known issue Peter. There are certain models of Kyocera and Canon printers which will only print the first page. As Mike suggested the issue will only be resolved with an updated driver from the printer manufacturers or an update to Acrobat 9. You might try Print As Image in the Advanced portion of the Print dialog. It is a checkbox at the top of the Advanced dialog. Good Luck!

Similar Messages

Acrobat Pro 8 Printing Problems with Xerox 252 Fiery

printer: Xerox 252 with Fiery Controller
Software: Acrobat Pro 8
OS: WinXp pro
The problem occurs when I am printing a binder that consists of 8x11 and 11x17's. The printer locks up and does not print. We have had the Xerox techs come out but after numerous trouble shooting efforts we came to a conclusion that there is an issue with Acrobat 8.
Also, in order to print an 8x11 or 11x17 there is a need to go through and set the file size for each time we print. The check box "print by pdf source size" is checked and we are still having problems.
I've had no issue with Acrobat 7 and the problems I'm having are with Acrobat pro 8.

Correction it's a Xerox Docucolor 242 PS with Fiery

Acrobat 9 Pro Printing Problem

I have a problem with printing in Acrobat 9 Professional. I am printing to a Canon imageRunner C3220 color laser printer, using PS3 driver. My OS is Windows XP Pro x64 2003 SP2.
Only the first page of multipage PDFs will print. I have checked Acrobat print settings as well as the printer's settings, and all seems to be correct. I sent a sample document to a co-worker and she printed it using Reader without a problem. The majority of the documents I create eventually become PDFs. This would be a serious problem if there is no solution.
Acrobat 8 worked fine. Any help would be appreciated.

Chuck,
I just went to the Canon website. For your printer, some of the printer
boards use Adobe PS3 and some of the printer boards use emulation. Can
you check to see which you have?
>Color Network Multi-PDL Printer Kit- A2 (Optional)
> Processor: Dual Canon Custom Processor 250MHz, Shared
> Standard Memory: 1GB (Std./Max.), Shared
> Hard Disk: 40GB, Shared
> PDL Support: UFR, PCL 5c, PostScript 3 emulation, PDF R1.3
> PostScript Fonts: 136 PostScript Fonts
> PCL Fonts: 80 PCL Roman Fonts, 1 Bitmap, 32 Barcode
> Interface Connections: 10/100 Base-T (RJ-45) (Standard)
>Token Ring, USB Full-Speed (1.1 equivalent) (Optional)
> Protocols Supported: IPX/SPX, TCP/IP, AppleTalk, SMB
> imagePASS- C1 v.2 (Optional)
> Processor: Intel® Mobile Pentium III 850MHz
> Standard Memory: 128MB Standard
> Maximum Memory: 256MB Maximum
> Hard Disk: 20GB
> PDL Support: PCL 5c, Adobe PostScript® 3
> PostScript Fonts: 136 PostScript Fonts
> PCL Fonts: 113 PCL5c Roman Fonts
> Interface Connections: 10/100 Base-T (RJ-45)
>IEEE 1284 Parallel
> Protocols Supported: IPX/SPX, TCP/IP, AppleTalk
> ColorPASS-Z3000 (Optional)
> Processor: Intel® Pentium 4 @ 2.4 GHz
> Standard Memory: 256 MB SDRAM Standard
> Maximum Memory: 512 MB Maximum
> Hard Disk: 60 GB
> PDL Support: Adobe® PostScript® 3
> PostScript Fonts: 136 Postscript Fonts

Acrobat 8 STD printing problem

Acrobat 8 STD prints all pages in landscape when "choose paper source by PDF page size" with the bizhub 450c this does not occur with acrobat 6 STD. is there a fix for this or a setting that I am missing somewhere?

This only seems to be happening with 8.5" x 11" pages. When I print a multiple page size document with this setting the 11" x 17" pages print fine both portrait and landscape. It also seems to work fine when I print to a Savin printer, but I have the problem when I print to a Fiery. I'm not sure if there needs to be a fix with Adobe Acrobat or the Fiery Print Driver.

PSE11-Anyone with Printing Problems Please comment

I earlier reported a problem with profiles with the new PSE11 and Mac OSx 10.7.5. See my previous threads.
The printing paths in PSE11 have changed. My problem occurs only on the first print every time I start up the application.
I am trying to diagnose the problem to approach Adobe with more information.
So any issues with how it works differently/incorrectly compared to other versions please comment. Even if you have to work out a bypass.
cheers elo
action so far
-delete and reinstall PSE11
-deleted all prefs
-checked Epson Support
-Registered with Adobe
-Run tests with different profiles generated by different applications/companies/myown
-Tests with previous version of OSx
-Run tests on PSE6,PSE9,PSE10 where it all works perfectly
To Do.
-replace Epson pro3800 print driver when I finish this weeks production work. (new driver released two months ago to support OSx Mountain Lion. Epson says it should not have anything to do with my problem?

I am having a similar problem. Have you made any progress toward a soloution?
After many emails back and forth and then an hour and a half on the phone with Epson support they determined my problem is a PSE 11 glitch and suggested I try some forums and keep them posted! Here is the problem. I recently upgraded from PSE 8 to 11 and upgraded my Mac OS to 10.6.8. I have been printing from PSE 4 as I got better results from 4 than from 8. My printer is an Epson R1800. When I launch PSE 11 and print an image it comes out terrific. BUT if I want to print a second image, or even the original image a second time it is terrible. I set the "color setting" option to "Epson vivid" on the print menu. That option is greyed out after the 1st image is printed. Doesn't matter if Elements manages color or if printer manages color. One good print and then I have to close PSE 11 and relaunch to get another print. Epson is suggesting that PSE is not “releasing” after the 1st print???
Any one else having this problem? Many thanks

Adobe Acrobat Reader 8 printing problems.

I am currently using Adobe Acrobat Reader 8 with the following information ,and I have problems printing in system configurations (I have an old Brother HL-1060 Laser printer)....
When I use the following defaultprinting preferences, the pages come out blank when printing riffmci.pdf (That can be found on the net):
- Resolution 600dpi
- 1200x600dpi Support: Off.
When I set the resolution to 1200dpi and 1200x600dpi Support to on the printing completes successfully. Is this a known issue with Adobe Acrobat Reader printing engine??
Technical
=========
Available Physical Memory: 148108 KB
Available Virtual Memory: 1954156 KB
BIOS Version: Award Medallion BIOS v6.0
Default Browser: D:\Program Files\Internet Explorer\iexplore.exe
Version: 6.00.2800.1106
Creation Date: 2002/08/29
Creation Time: 06:14:40
Default Mail: Mozilla Thunderbird
D:\Program Files\Mozilla Thunderbird\mozMapi32.dll
Version: 0.8
Creation Date: 2007/01/07
Creation Time: 14:31:35
Graphics Card: ASUS V9400-X V62.11
Version: 6.14.10.6211
Check: Not Supported
Installed Acrobat:
Installed Acrobat: D:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe
Version: 8.1.0.2007051100
Creation Date: 2007/05/11
Creation Time: 03:06:38
Locale: French (Canada)
Monitor:
Name: ASUS V9400-X V62.11
Resolution: 800 x 600 x 60
Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows 2000 Professional
OS Version: 5.0.2195 Service Pack 4
Page File Space: 1537052 KB
Processor: x86 Family 6 Model 8 Stepping 1 AuthenticAMD ~1813 Mhz
System Name: HOLMES
Temporary Directory: U:\temp\carl\
Time Zone: Eastern Standard Time
Total Physical Memory: 1048032 KB
Total Virtual Memory: 2097024 KB
User Name: carl
Windows Directory: D:\WINNT
Installed plug-ins:
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Accessibility.api
Version: 8.1.0.2007051100
Creation Date: 2007/05/11
Creation Time: 02:37:28
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\AcroForm.api
Version: 8.1.3.2008101500
Creation Date: 2008/10/15
Creation Time: 00:36:16
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Annots.api
Version: 8.1.3.2008101500
Creation Date: 2008/10/15
Creation Time: 00:34:34
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Checkers.api
Version: 8.1.0.2007051100
Creation Date: 2007/05/11
Creation Time: 02:37:42
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\DVA.api
Version: 8.0.0.2006102300
Creation Date: 2006/10/23
Creation Time: 01:10:52
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\DigSig.api
Version: 8.1.3.2008101500
Creation Date: 2008/10/15
Creation Time: 00:35:06
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\EScript.api
Version: 8.1.3.2008101500
Creation Date: 2008/10/15
Creation Time: 00:36:58
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\EWH32.api
Version: 8.1.3.2008101500
Creation Date: 2008/10/15
Creation Time: 00:35:48
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\HLS.api
Version: 8.0.0.2006102300
Creation Date: 2006/10/23
Creation Time: 01:10:22
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\IA32.api
Version: 8.1.3.2008101500
Creation Date: 2008/10/15
Creation Time: 00:35:22
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\ImageViewer.API
Version: 8.0.0.2006102300
Creation Date: 2006/10/23
Creation Time: 01:10:36
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\MakeAccessible.api
Version: 8.1.0.2007051100
Creation Date: 2007/05/11
Creation Time: 02:38:36
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Multimedia.api
Version: 8.1.0.2007051100
Creation Date: 2007/05/11
Creation Time: 02:39:30
D:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\PDDom.api
Version: 8.0.0.2006102300
Creation Date: 2006/10/23
Cr

I have the same problem!
Adobe Reader 8.1.2
Please help

Can someone help with print problem?

I have problem saving the printer driver settings in CS6, and not shure it is problem with my installation only. Can anyone check for simlar behaviour by selecting some printer driver settings that are not the default ones and see if those are saved when Done button in the Print dialog is pressed. Thank you!

There are only few threads describing the similar problem, I have been checking for meny years for that because it is nothing new to me I remember the same behaviour in CS and CS2, and allways wondered why there was no official fix for it. Actually, the reason to ask for help is not the bug itself, but rather the bizzare lack of user complaints in community forums, that would have eventually rised the program designers attention. Am I the only one out of maybe millions of Illustrator userrs that regularly prints from it?

Acrobat 8.0 Printing Problem?

I am having a problem using Acrobat 8.0, updated, and printing a pdf document from IE 8 or 9. I am using Windows Vista, updated. The problem I am having is when I attempt to print a web page thru the Adobe printer the titling and oulining of the page will print exactly as on screen, however the 'data' or verbiage of the page comes thru as gibberish. This problem developed approximately 4 weeks ago. I have been using the above OS and applications for approximately 4 years no problem such as this, when suddenly this arose.
Does anyone have any insight on this?
Thank you,
SMW

Bill,
Thanks again for the thoughts on this. I have used both the IE8 and the IE9 to the same results, both before and after the harddrive failure and subsequent re-installs of the software. I have attached a couple of examples of the problem. The first is a page where the website provided 'Printer Friendly' options for the printing. The second is simply a webpage where I converted the web page to pdf.
Thanks for any insight.
SMW

Updated to OS X 5 & now with printing problem

Just updated from OS X 3.8 to OS X 5.0 and then thru 5.8. I have a G-5 Dual 2.5 from the old power days and HP Office 5500.
So far everything has worked fine except that I can't print docs such as Word, Excel or pdf.
The G-5 is communicating with the printer, test's work etc and printer makes noises and then does nothing for doc excel or pdfs. and then que's them up. I get this error message
"/private/var/spool/cups/d00517-001'"
I got the error message before and after I up dated my HP driver software.
Please help!! Thanks
cj

"tx" a brody for the link but a couple of weeks later I still haven't solved the problem.
I've gone to various links and finally again? downloaded new HP driver software... the latest available 10.4... no 10.5 and of course 10.6 won't work.
At least before the printer would click and whirr and act like it was ready to print.
Now I don't even get that . Nothing.
Please anyone... I need to print some things and now more than willing to pay for getting it to work.

Adobe Acrobat XI Pro Printer Problem

When I export my *.doc to a *.PDF using Word, the *.PDF generated displays correctly on my computer but prints incorrectly on my printer. Whole sections of text will not show up on the physical printout. All my software is up to date. Please help.

Check to see if the printer in Acrobat is set to document and markup. It may be that the information being printed has been restricted. When you say export, what do you mean. There is no export as such in WORD, only print to the Adobe PDF printer, Save As Adobe PDF, Save As PDF & other (the MS plugin), and the Adobe menu for create PDF (this is PDF Maker). The last comment may not be the issue for you, but is a clarification question on how you got the PDF.

Acrobat Reader XI print Problem

After updateing to Acrobat Reader XI I can not print. error msg says "Document faild to print" then nexyt screen says " No pages were selected" many varied attempts no print remove XI reinstall X prints OK until auto upgrade to XI same problem

Windows 7, using Open Office, Firefox, Thunderbird, Brother MFC J475DW printer.
trying to print using the print function to the printer ( print file, or direct print ). Open office or windows print fine text and pictures. from other documents.

HELP with printer problems...

Have just reinstalled printer drivers and I do not have the folder PRINT CENTER in my utilities folder. Not sure why. Only the PRINTER SETUP UTILITY folder is there. My problem is that I cannot access the printer dialogue box that has pulldown menu for paper specs, so cannot print as needed. My printer is Epson Stylus 1280. Any help/ advice would be greatly appreciated.. troubleshooting all day to no avail..
G4 PPC Mac OS X (10.4.8)

OK. Did that. But I cannot access the pull down menu that enables me to choose the type of paper. Both quark and photoshop heve that box but its not coming up on this computer. (It does on my other OS9 computer)

Please help with Printer problem on MBP

I am running 10.5.1 and am trying to install the software to enable me to scan. I have tried from the original CD, but it doesn't work (i assume this is because it was meant for 10.4). I have also tried downloading from the website but the download always says something like "19mb out of ?" and then eventually the downloads errors out.
Is there any way i can get the scanner to work? can anyone upload this software to me? I know its a lot to ask but im not sure what to do.

Don't know what to tell you, but I downloaded the file without any problem. Do you have enough space on your drive for the file? You may have a problem on your drive so you might consider doing the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

10.6.8 Printing problem with HP Photosmart premium C310 printer

I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

Double-sided printing problem Acrobat Pro

I am trying to print pdf docs (downloaded from scientfic journals) and do right thing by manual doubled-sided printing i.e. print even pages first in reverse, turn paper over and then print odd pages.
When I first print even pages in reverse it prints second page twice and when I print odd pages it does not print last page.
I have doing this for last 5 years using older versions of Acrobat Professional with no problems.
Windows XP Professional - Have lastest updates on Acrobat.
Thank you.

>I have doing this for last 5 years using older versions of Acrobat Professional with no problems.
and what version are you using now?

Acrobat 9 bug with printing problems

Similar Messages

Maybe you are looking for